How to backup one Time Capsule with another Time Capsule?

I have two Time Capsules and a Mac Mini. The first Time Capsule (TC1) is plugged by ethernet cable directly to my Mac Mini. It is also set up to provide my home with a wireless network. The second Time Capsule (TC2) is upstairs and connected to this network wirelessly.
I am using TC1 to store all my photos and iTunes music library because the Mac Mini hard drive is too small, and I want to setup TC2 to backup the Mac Mini and certain specific folders on TC1.
I've started Time Machine up and selected TC2 as the backup drive but it only seems to backup my Mac Mini hard drive and not the contents of TC1. There doesn't appear to be any way to tell Time Machine to backup TC1 either.
Can anyone offer a solution?
P.S. I'm a Mac newbie so please humour me if I have asked anything completely obvious!
Message was edited by: Carl Bradbury

Final solution:
I setup my first TC to use as a Time Machine backup of my Mac Mini, connected via an ethernet cable. It broadcasts a wireless-n network that my other laptops connect to.
I then bought Intego's Personal Backup to make periodic copies of the important folders (iPhoto library, iTunes library, etc) over to my second Time Capsule, which is creating its own private wireless-g network. The Mac Mini's airport is set to connect to this private network.

Similar Messages

How do I insert a section with another time signature than the one im inser

How do I insert a section with another time signature than the one im inser

Yeah I've been trying to figure this out as well, for example... my song might be 90 bpm and I want to program another track using midi but have it play at 180 bpm. The only way I've found to work around this is to write my 180 bpm part make a sample of this and then loop this into the 90 bpm song.

ESS - Time - Collision with another Time Entry

Dear Sir,
We have an Attendance Maintained (2002) for emp X today.
When we apply for leave on same day (Absence - 2001) through PA30 System over writes the entry.
(Not a problem)
While we apply for leave throught ESS we are getting the error "Collision with another Time Entry" .
Please let us know what all changes are to be done so that the system can accept the absence on same day on which attendance is there.
Thanks & Regards
Param

Hi,
1st check the Time constrain for the infoype with help of the HR functional consultant, try to make entry by Tcode PA30 if itu2019s a successfully done.
Check the configuration by "PTARQ" Customizing options.
Check the T-code "PTARQ" in that select "Post Document " in the Post Document selection screen 1st click upon the "Test Run" and then execute see the data is proper or not, Once you clear with the DATA is correct then again Run same report without clicking upon " Test Run" once you done with the posting then check the same by T-code "PA30u201D.
Let me know the details

How to Regester one Shared Service with Another ??

Hi All,
I am working on Hyperion System 9.3.1. I am getting problem when I want to access Essbase through Planning.
Here is the scenario:
I have Hyperion Essbase installed in Computer 1 with separate Shared Services; I have Planning installed in Computer 2 with another Shares Services.
All things were working fine as I have created same users in both the shared services and was using native user of Essbase.
Now I have changed the native user to Externalize user in Essbase. Since then I am not able to access Essbase through my Planning application. The user privilege differs in both the Shared Services as Computer 1 has only Essbase and Computer 2 has Planning.
The error message I am getting in planning while connection is “Unable to obtain a connection to Hyperion Essbase”. In the essbase.log file I am getting “Login fails due to invalid login credentials” message.
I think the problem here is between Shared Services only. As both are in different system and the user privileges are also different.
Kindly suggest how to sink my Essbase between these two shared services.
Regards,
Navneet

Just to clarify,
You have Planning and Essbase on one machine and you have shared services installed twice on different machines?
I'm not sure if this architecture will work, you might have to separate Planning and Essbase to there own servers and create a new Essbase server specifically for Planning applications. Planning utilizes Essbase for its OLAP data store and Essbase registers with Shared Services directly.
Brian Chow

How to merge existing itunes library with another time machine volume?

hi all,
i am 2 macs, an iMac and a MacBook - both running Snow Leopard 10.6.3 and both running itunes 9.
is possible to merge the itunes library on the MacBook onto the iMac via my MacBook's Time Machine volume? i do not have my MacBook with me at this moment cos' i have sent it for diagnostic and repair. i have the latest itunes library backups on my MacBook's Time Machine.
hope to hear some valuable pointers. Thank you!

mook73 wrote:
is possible to merge the itunes library on the MacBook onto the iMac via my MacBook's Time Machine volume?
i have never attempted such an operation, so no step-by-step guide !
you will be able to restore the other Mac's library to the iMac. go here and follow the instructions: http://web.me.com/pondini/Time_Machine/17.html. restore whatever you need to a temporary location, i.e. the desktop.
if you only want the media files, just restore the iTunes music folder. when restored, use +add to library+ from the file menu or just drag the folder you restored to the +automatically add to iTunes+ folder inside the iTunes folder.
if you also want playlists, playcounts, and ratings, you should restore the entire iTunes folder.
take a look @ PowerTunes. this app should enable you to merge the two libraries.
good luck !
JGG

How to replace one BC template with another

I am using an existing BC template and want to change to a new template (same domain) - any thoughts on how to achieve this?
Thanks.

Change a BC template to another? You can not at this stage on that same site, you would have to create a new site yourself or update everything manually

How to Attach One adobe form with another adobe form

Hi Experts,
I saw the similar post but my issue is even further big thant that where the solution is provided.
I Have @ 40 output forms where 35 forms share same part of data in a table format.
Untill today I have done all the forms with this table data (I say this as a replication), now its that the business requirements are changed the presentation (design) of data and the content. now I need to change all the 35 forms.
Just wondering is there a possibility to put the specific data in one single form where it takes only one Import Parameter and generates this table. I then have this as an include in all the 35 forms when i preview it should just display both of them as a single form.
Can somebody help me with this....?
Thanks & Regards,
Sai

Hi Otto,
I will try the approach you blogged in and will close this post with points awarded.
Cheers,
Sai

Replace one itunes account with another

I have the itunes application downloaded on my laptop but i recently made another itunes account and i want the new one to be on the Itunes application. So i uninstalled the application thinking that if i downloaded it again it would ask me for an account. Except all it did was restore the old account. I am wondering if anyone knows how to replace one itunes account with another. If you know anything that can be useful comment.

Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2

How do you make an appointment in another time zone with IOS7?

How do you make an appointment in another time zone with IOS7?

Not clear how you want to set them - in your time zone or "another" time zone.
Settings > Mail, Contacts, Calendars > (scroll down to Calendars) > Time Zone Support > ON/OFF (depending on how you want it)

My hard drive died. How can I start my computer with my Time Machine external drive?

My hard drive died. How can I start my computer with my Time Machine external drive?

Pondini wrote:
If you're on 10.7.2, yes, you can boot from the TM drive.
Beep, beep, beep....
Hold ON! Getting a call on the red phone.
"Yes...yes.... ok!"
It's confirmed, H.e.l.l. has finally frozen over! TM drives are now bootable!
Still it's not a real bootable clone, can't run the computer off the external drive for long in only Recovery mode, still requires the boot drive to be replaced if it not functional, and with TM backing up every hour, isn't going to offer much software protection as the TM drive is just as likely to be as messed up as the internal boot drive.
For a iMac it still requires the computer to be taken in to Apple for a drive replacement, as ONLY Apple can do it due to proprietary connections and firmware on the iMac hard drives.
But it is bootable!
The backup time factor can be controlled using TimeMachine Editor, from every hour to just when the user thinks it's necessary.
Apple lurches slightly forward! Hurray!
Question is, can one restore from earlier stable TM's or just the last one? In this bootable fashion?

My pc broke! How can I syncronize my iphone with another pc?

My pc broke! How can I syncronize my iphone with another pc?

You can only sync with one computer, do you not have a backup of your library to transfer to the new computer?
If not the only way is to transfer purchases
http://support.apple.com/kb/ht1848
http://support.apple.com/kb/ht1727
For non-purchased content you will need to find a 3rd party app

How to use one hash table inside another hash table

Hi everyone,
Any example of hash table inside another hash table.
Can one here help me how to write one hash table inside another with repeating keys for the first hash table.
Thanks,
kanty.

Do you mean you want the 'value' entries in a hash table to themselves be hash tables? Easy but this often indicates a design flaw.
Hashtable<String,<Hashtable<String,Value>> fred = new Hashtable<String,<Hashtable<String,Value>> ();But what do you mean by "with repeating keys for the first hash table"?
Edited by: sabre150 on Jul 2, 2010 10:11 PM
Looks like you have already handled the declaration side in your other thread. I suspect you should be writing your own beans that hold the information and these beans would then be stored in a Map. The problem I have is that your description is too vague so I can't be certain.

How do I share multiple contacts with another iPhone?

How do I share multiple contacts with another iPhone? Thanks in advance.

What do you mean share?
It is not possible to send contacts from one iPhone to another without installing an app that would support this. Bump is one such app.
There is no functionality in iOS to do this. iCloud can share contacts across multiple iDevices, but it would be ALL contacts, just just a few.

In Pages how do I save a file with another name

In Pages how do I save a file with another name?

I don't know if there is a less cumbersome way to do this (I'm still pretty new to Lion) but This is what I do - since "Save As" seems to be gone with Lion.
I create a duplicate document - then click the red button to close the document - and a dialog box pops up and asks if you want to save the changes - I change the name in there and then save the file under the new name.
You can also save the copy to the desktop - get info - and then change the name if the finder window.
I copied this from the Pages help area. These help instructions were created pre-Lion I'm sure.
Saving a Copy of a Document
If you want to make a copy of your document—to create a backup copy or multiple versions, for example—you can save the document using a different name or location. (You can also automate saving a backup version, as Automatically Saving a Backup Version of a Document describes.)
To save a copy of a document:
Choose File > Save As and specify a name and location.
The document with the new name remains open. To work with the previous version, choose File > Open Recent and choose the previous version from the submenu.

How to execute one .exe file with as3 in air ?

Hi
How to execute one .exe file with as3 in air?
I want do this work without fscommand .
plize help me .

itsdhanasaraa wrote:
But as this a web application ... By using Runtime i'm getting some probs ..
Let me guess, you want your web application to run a program on the client and to your surprise that's not working?
Ain't gonna happen.
its taking more time to execute .... that's y is there any other option to execute .exe file other than Runtime.getRuntime().exec("filename");Write proper English and you may be taken more seriously.
1) it's not "taking more time to execute", whatever that's supposed to mean.
2) there's no other way to execute something. Not that you should every use even that way anyway
3) whenever you start thinking of executing external programs from Java, start thinking of not using Java in the first place.

How to backup one Time Capsule with another Time Capsule?

Similar Messages

Maybe you are looking for