How to backup time Capsule

I have a lot of data on the Time Capsule. Incase of the Time Capsule failing, is there a way to back the Time Capsule up to a hard drive or something?

I believe Seagate formats their drive NTFS out of the box. You need to plug it directly into your Mac (not via Time Capsule) and use Disk Utility to re-format it as HFS+ (Mac OS Extended - Journaled). After that, it should work fine after unmounting, unplugging and re-plugging it into the TC USB port. Partitioning, if desired should be done before formatting and in GUID with Intel CPUs. This may be desired as the Archive function will only require 0.5 TB as that's the size of your TC HDD.
Message was edited by: -(.)^(.)-

Similar Messages

  • Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112). How can I repair it?

    Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112).
    How can I fix it?

    You might want to take a look at Pondini's excellent support document......Time Machine Troubleshooting
    http://pondini.org/TM/Troubleshooting.html
    See # C17

  • How big a Time Capsule do i need, I'm totally new to Mac!

    Hi, how big a Time Capsule do I need in order for it to work as my backup? Let say if I bought an Imac with 2 TB HDD + 256 GB SSD and with that, bought a 2 TB Time Capsule for backup, would that be enough or would I need to buy a 3 TB Time Capsule? Thanx!

    But if I buy the Imac I wrote about in my previous question (2 TB HDD + 256 GB SSD), would I then need to buy two, 2TB Time capsuls,
    If you plan to fill up most of  the space on the iMac right from the start, then you might need more space. Few users ever use more than about 75-80% of the space on their computers. I was figuring you would fill up about 75% of the drive....around 1.5 TB or so.  3 TB backup would be about right.
    If I buy 1 TB HDD + 256 GB SSD, then 2 TB Time Capsule will be enough, right?
    Correct.

  • How to use time capsule for wireless back-up but not internet?

    Hello,
    I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
    I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their  network.
    Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
    Thank you for your help.

    Your original question was How to use Time Capsule for wireless back-up but not Internet?
    There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
    If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
    Yes, it appears to work without plugging into my tower.
    Correct, it will work.
    I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
    As I stated, that is the downside to trying to back up without an Internet connection.  You have to establish another network...and backup over that network.
    If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • My os is 10.8.4. Airport Utility is 6.3. When I try to pull backups, time capsule says: 'The folder "Pictures" can't be opened because you don't have permission to see its contents.'.

    My os is 10.8.4. Airport Utility is 6.3. When I try to pull backups, time capsule says: 'The folder “Pictures” can’t be opened because you don’t have permission to see its contents.'. So I cannot use Time capsule to back up so what gives?

    Did you use migration assistant when you set up the computer?
    TM will treat this as a different computer and permissions issues can arise from that.
    Pondini is the expert on that stuff.. hopefully he can drop in.
    But I recommend you read all the FAQ to do with restore.. Q14-17.
    And then look at the permissions issues he lists in troubleshooting.
    E9 in particular. http://pondini.org/TM/Troubleshooting.html

  • Is there  way to store my movies on my Time Capsule instead of laptop drive? I will then run an external drive to backup Time Capsule.

    Is there  way to store and run my iMovies on my Time Capsule instead of laptop drive? I will then run an external drive to backup Time Capsule as my backup.  I want to dothis because my hard drive is full and I still have many movies to import form camcorder.

    I do not know about iMovie, but the experts in the iPhoto and Aperture support areas strongly advise against trying to install your "working" image library on the Time Capsule.
    You might want to ask about this in the iMovie support area.
    iMovie for Mac
    It would be much easier and much better if you use the external drive to connect to your Mac via USB or FireWire and then store the movies there.
    Then, Time Machine will back up both your Mac and the external hard drive automatically once you tell it to do so.

  • Je veux avoir accès a mon backup Time Capsule avec un autre ordinateur et je ne vois pas mes backups, je veux avoir accès a mon backup Time Capsule avec un autre ordinateur et je ne vois pas mes backups

    je veux avoir accès a mon backup Time Capsule avec un autre ordinateur et je ne vois pas mes backups, je veux avoir accès a mon backup Time Capsule avec un autre ordinateur et je ne vois pas mes backups

    Je me permet de rajouter un point sur ce sujet.
    Après plusieurs tests, il s'avère que je ne peux plus effectuer d'export Apple ProRes 422 à partir d'AE CS6 !
    Voici le message d'erreur que j'ai encore eu ce matin :
    Je pense que cela vient d'un conflit entre Adobe QT32 Server et Quicktime ? mais j'ai beau regarder un peu partout dans les forums et suivre les procedures décrites, je n'arrive pas à régler ce problème ?
    Est ce que quelqu'un a le même probleme ?
    D'avance merci
    A+
    Fabien,

  • Je veux avoir accès a mon backup Time Capsule de mon MacBook-A   avec un Mon Macbook-B .  Je ne vois pas mes backups du Macbook-A!! J'ai besoin d'aide SVP, Merci

    je veux avoir accès a mon backup Time Capsule de mon MacBook-A   avec un Mon Macbook-B .  Je ne vois pas mes backups du Macbook-A!! J'ai besoin d'aide SVP, Merci

    je veux avoir accès a mon backup Time Capsule de mon MacBook-A   avec un Mon Macbook-B .  Je ne vois pas mes backups du Macbook-A!! J'ai besoin d'aide SVP, Merci

  • How to add Time Capsule to a Telewell ASDL Router

    I tried to connect Time Capsule (2 TB a bit older model) to a Telewell ASDL Router and then run Time Machine through WiFi to Time Capsule. However, the only way I was able to make it work was to plug Time Capsule to the MacBook with an ethernet cable. When I tried to plug Time Capsule to the Telewell Router (with an ethernet cable) the internet connection of the router got disconnected. So I believe I am asking how to connect Time Capsule to the router, and if I need to do something in addition (i.e. is is possible to run two WLANs - the one from Telewell and the other from Time Capsule simultaneously?).
    Thanks for your help!
    Matti

    Put the TC in bridge mode and plug it into the Modem.. it will work fine if you set it up before you plug it in.. I have given extremely detailed instructions here..
    https://discussions.apple.com/thread/5703308?tstart=0
    Are you really using Snow Leopard?? If so the manual setup from 5.6 utility is a bit different but the overall information is still correct..
    You can run two different WLANs without issues.. you must setup the TC to create a wireless network anyway.. do not try to extend or join the modems' wireless .. that is wrong.
    It has to be plugged into the modem by ethernet.

  • How fast would Time Capsule restore 500GB over wi-fi, Thanks

    How fast would Time Capsule restore 500GB over wi-fi, Thanks

    Using Ethernet, you normally get around 30 GB per hour transferred, so about 16-17 hours that way.
    Wireless would be about 3-5 times slower, on average, so a very rough estimate would be 50-80 hours over wireless. Much depends on your actual wireless connection. Do you know what that is?

  • How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

    How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

    Cross your fingers and hope.
    Obviously if there is any big or known threat Apple will send out a firmware fix.
    But the TC is designed to be end user simple device. It has no firewall that is visible at any rate. I don't know that it truly doesn't have a firewall but it is not part of the end user controls.
    IMO if you have major security concerns that go beyond end device firewall, which is where Apple do put most of the security, since firewall in the router is plainly not a stop to anybody deliberately downloading an infected file or website, and most end users.. do not want a firewall that prevents them using the web like a business does, where only certain ports are allowed. Everything else tough luck.. you are not allowed to use it. Then TC is unsuitable for you anyway.. buy a proper firewall appliance.

  • How to setup TIme capsule with a DSL router step by step?

    Hi All,
    Does anyone know how to conncet Time Capsule set by step through a DSL router?
    I already have a DSL router, but want to connect my time capsule to that router.
    Do i connect it through ethernet?, and is it possible to have my time capsule as a different router at home with a different password than the DSL router?, if so how is that possible?, is going to have the same download/upload speed as the DSL router?
    Please help, thanks

    You simply bridge the TC.
    Plug it by ethernet into the adsl modem router and it will work fine.
    nd is it possible to have my time capsule as a different router at home with a different password than the DSL router?,
    No, the TC will cause trouble if you set it up as a router.. it has to be bridged. You only have a single adsl connection but there are some ISP that allow a secondary pppoe login and some modems that allow it. It is pretty difficult setup. Ask your ISP as there is often a charge that is very high for the second connection. It will still share the same link so there is no improvement in speed, merely two different authentications sharing the same line. The TC can do pppoe client but has nothing very fancy about it.

  • How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn. 
    Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
    This is the only safe way to do it via windows.
    http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
    If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB.

  • How to configure Time Capsule etc as a local network server with remote access server and for backups

    I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
    We've managed to set up a wireless network and both have wireless internet access through the TC
    But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
    I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
    So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

    But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
    Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
    And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
    Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
    What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
    A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
    One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
    How is the security setup on the TC?
    The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate  but it allows me full access to all the files.
    If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

Maybe you are looking for

  • The Status of the Virtual Machine Is "Error"

    hi, i using Oracle VM 2.1.2 version while starting the machine,it shows the status as Error when i checked the log for the same,log shows the below error failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/OVS/running_pool/25_srv2vm2_oel

  • Output error in smart forms

    I am facing a typical problem in rendering output from smart forms to pdf. The program was working fine before , now after some patch application the output is not comming , it shows " A Drawing Error Occured" Regards

  • PEI OnPageFinish(...) - get community ID ?

    I need to log (in a DB) when a user accesses any community. My first thought was to look into using IDirectoryActions but since we already have an implementation for IPageActions I decided to use that. At first I was going to just get the current URL

  • IPhoto 8.1.2 Quits when Exporting

    When trying to export photos to my Pictures folder on my hard drive, iPhoto quits.  I can export fine to a 3rd party site though.  Below is the error message I get.  Would appreciate any thoughts. Process:         iPhoto [1418] Path:            /Appl

  • Microsoft Access 2003 - Import xls issue

    I'm having an issue with oracle SQL developer which exports an xls file then I proceed to import that xls in Microsoft Access 2003. I got a following error message related to the headings. "The first row contains some data that can't be used for vali