How to backup to two different external harddrives

Hi folks,
i want to backup my Leopard Server with Time Machine to two different external FireWire HDs. Is this possible without having to switch the Volumes manually?

Computerdoc wrote:
This is what i do now. Clone with CCC and do a Time Machine backup on another partition. Anyway do you know how to change the TM intervall? I read something about changing the com.apple.backupd-auto.plist in System/Library/LaunchDeamons but that did not change anything for me.
That's usually not a good idea. TM was designed to run hourly, and normally protects you best that way.
If the backups seem too large, there are some apps that can cause extra-large backups. See #D4 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum. It lists some of the common causes, and shows how to find out what's actually being backed-up each time.
If the size is reasonable, but the backups still take too long, see #D2 in the Troubleshooting Tip for possible causes of that.
But if you really want to alter the schedule, see #9 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

Similar Messages

HT1766 How do I back up my iphone5 to my ICloud account, when my restrictions password. My restrictions pass code has my icloud a account greyed out? Can i backup to a wd external harddrive, or try to backup to a new mini-mac, i jUst purchased?

How do I back up my iphone5 to my ICloud account, whqen iI have forgot my restrictions password. My restrictions pass code has my icloud a account greyed out? Can i backup to a wd external harddrive, or try to backup to a new mini-mac, I just purchased yesterday? This is my first iMac and IPhone5, so i am kinda out on my own, and can use some pointers!! My phone is full of pictures, and will not download anything, until i store my pictures somewhere!!

If you don't remember your restrictions passcode, you will have to force the phone into recovery mode and restore it using iTunes. Do NOT restore your backup. The restrictions passcode is part of the backup.
Everything on the phone will be lost.
You can extract the photos from the camera roll the same way you would from any other digital camera. Having a restriction passcode set should not prevent that. do that before you put the phone in recovery mode and restore it.

Can Time Machine Backup to Two Different Drives?

I have many Apple Computers, and I was wondering if it were possible to have time machine backup to two different drives.
I want it to back up My documents, Mail, and other files/folders that I access often to a partition of my internal drive every minute.
And
I want it to back up Everything on my Mac to my external each night upon connecting it to my mac.
I take my MacBook everywhere with me and I need to make sure that the files I work on the most stay Perfectly Accessible no matter what, and I don't want to sacrifice too much space for that procedure. I would rather just be able to do constant backups of my most used files and folders, and then do a system backup each night to make sure I always have what is needed.

Let me add some more observations. I use two disks, one at home (its a mounted volume on another Mac at home) and the other is a portable disk that I attach to my MBP at work. This works fine.
About your details - TM backs up every hour. If you look around you'll find some posts that give instructions on changing the frequency (I haven't paid attention to these, so I can't help you). However, backing up to another partition on the same drive is not what I'd recommend. If the drive dies, you may lose both partitions.
As for doing constant backups of the most used files and at night doing a system backup - it seems to me you aren't "getting" TM. This sounds like the type of backup strategy one uses with "regular" backup software. I don't think I'd recommend backups every minute, but for short intervals, why not just do a default backup of everything. It doesn't really back up everything, just things that have changed. The only time it does a complete backup is the first time you use it with a specific drive. After that it no longer does complete backups, unless you reformat the drive and start from scratch.

My boyfriend and I have our own iPhones but share an iPad. How do we create two different profiles or user accounts, etc?

My boyfriend and I have our own iPhones but share an iPad. How do we create two different profiles or user accounts, etc?

Unfortunately, at the moment you cannot create two user profiles on one iOS device.

How do I put two different apple id accounts on one computer?

I have my account on my home computer but I have another account that I set my Ipad up with. How do I put two different accounts on to one computer?

Refer to FAQ
http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

HT204053 How can I sync two different email accounts?

How can I sync two different email accounts? All of this Mobile Me and cloud stuff got me all flustered and now I have two accounts possibly 3.

How to use multiple iPods, iPads, or iPhones with one computer

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

hello,
How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
thanks,
Jay

Hi,
I understand that it applied first logo to all other sub sites.
Please make sure that you change the logos in the subsites.
If we change the logo in the root site, the logos in the subsites will be changed at the same time.
However, we can change the logo in the subsites separately.
We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

This should do the trick
Home Sharing Learn More
http://support.apple.com/kb/HT201976
Best of Luck

How do I use two different apple IDs on one itunes?

How do I use two different apple IDs on one itunes?

This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K

Can you please help me by saying me how can i join two different picture to make it as one picture.??

Hi Sir/ Madam,
My name is Rishav and I am facing some problem with my Photoshop CC. Actually I have a question. If you guys could help me out i will be very obliged. The quest in "Can you please help me by saying me how can i join two different picture to make it as one picture.??"

Maybe you should post over at
Photoshop for Beginners
or start with the "Get Started" section of the Help:
Photoshop Help | Photoshop Help
And your question
Can you please help me by saying me how can i join two different picture to make it as one picture.??
does not seem particularly specific – do you want to simply combine two images as they are, do you want to clip elements from the one and insert them into the other, …?
Could you post (lores of) the images and explain what you intend to achieve?

How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

mpcsouza wrote:
How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?
you can't, GB is restricted to a single time signature per project
however, the time sig is really more cosmetic, it doesn't affect the way the project plays back, so you could set the project to 2/4 when working on the 2/4 parts, and 3/4 when working on the 3/4 parts

How can I order two different calendars from iPhoto in the same order?

How can I order two different calendars from iPhoto in the same order?

You cannot - the "Buy Calendar" button is only available, while viewing one calendar. You can order more than one copy of the same calendar on one order, however.

How can I set two different emails in only one contact form?

How can I set two different emails in only one contact form?

To enter multiple email address with the Contact Form Widgets:
Click the Options icon for the selected widget, then
In the Email to box, enter multiple emails by delimiting them with a semi-colon. For example: [email protected];[email protected]
Cari

How to backup to two different external harddrives

Similar Messages

Maybe you are looking for