How to Batch change dates?

I have a cannon rebel t1i and am using the latest version of iPhoto ( as of 7/10/10 ). I went to China recently and use two cameras. I changed the date and time settings on the other camera, but not on this one. When importing, in my China event, these show up at the top and in the wrong places and times. I still have the pictures on my camera and deleted them off my computer. I want to add 15 hours to every photo. I have around 500 photos and do not want to go through them all to change them. Is there a way I can say "Add _ time to all the photo's in this batch"?

Import them into iPhoto and select them all (the last import window may be the easiest place) and use the adjust time and date command (photos menu ==> adjust time and date) - it will calculate the needed delta from the first photo and adjust all selected photos by that amount
LN
Message was edited by: LarryHN

Similar Messages

Batch Change Dates in Aperture

I want to batch change hundreds of images in 1 event (or project) in Aperture 3 to be timed apart by the time designation I set forth on the batch process. I have easily done this in iPhoto 8 by selecting all the photos, ctrl-clicking "batch change" and changing the date to be set for a given time, and adding 1 minute to each photo.
I'm building a book by interleaving 2 events of scanned images by their times. It works great in iPhoto, but I can't process the images like I can in Aperture.
If anyone knows how to batch change dates as in the above procedure, let me know. Thanks.

I've been using ABFR and ABFA from http://www.publicspace.net/index.html to change thousands of images in the Finder that had incorrect time/date stamps and used ABFR to pre-fix the file names with the correct date stamp. You can also setup a batch droplet based on your settings.
It was able to grab the camera date, even though the created/modified dates were wrong and correct things.
May or may not be what you are after, but for batch renaming/adjusting attributes I haven't found anything better.

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

How to get change date in Production Order ?

Dear Friends,
I want to know it, how to get change date in Production Order "Administration-TAB".
F1-Help, It is displayed with "Change date for Order Master". and Structure table "CAUFVD".
But, CAUFVD is not Transp. Table.
Which table should I read ?
Thanks in advance
Yamazaki-H

Dear Friend
Thank you for an answer.
It was settled.
Best regards.

How to batch change the standard value of routing

Dear all,
         I meet a problem, and need you help.
        As you know, we can use T-code "CS20" to batch change a component's quantity in different Bom by a factor.
       for example: Component a in Fert. A, quantity change from 6g x 0.9 = 5.4g
                           Component a in Fert. B, quantity change from 8g x 0.9 = 7.2g
       now, my question is how to Batch change the standard value in routing. (select by work center) CA85N can select the value, but seems can not batch change by a factor,
       thanks in advance

It is not a big task for u prasobh...Just play in CEWB for 5-10 mins you will understand everything....
If you face any issue let me know..
For ur information I am also an IBM employee...
Gobi

How can I change dates to the UK format, DD/MM/YY, in Mac Numbers?

How can I change dates in Mac Numbers to the UK format of DD/MM/YY? When I correct them individually they automatically return to the US format.

Open System Preferences, then click the "Languages & Region" pane in the first row.
Change the Region from "United States" to "United Kingdom"

How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

Hi,
Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

How can I change data carriers on my ipad?

How can I change data carriers on my ipad mini?

Get a plan from a different carrier and insert the sim they give you.

How do i change date in iphoto on an event?

how do i change date in iphoto on an event?

Change the dates on the photos. Then, to force iPhoto to revise the ctalogue, flag the photos and go: Events: New Event from Flagged Photos.
Regards
TD

How to batch change a date in aperture

Is it possible to batch change a date in aperture the way I do it in iphoto (command option B)? I dont want relative dates, I want a group of scanned pictures (negatives) to have the same date, but separated by one second.

Dale,
Aperture does not support this. I wrote a little Apple Script to adjust the data and time like iPhoto and posted it on my web page. You may have a look and take this as a starting point. I wrote the script last year; so it has only been tested with Aperture 3.2.4 and Lion, not with the current version: The script is here: Adjust Date and Time in fixed increments
But no guarantees given for the current Aperture version 3.4.3.
Regards
Léonie

Batch Change Date Only

I would like to change dates on a batch of photos, however when I go to do this, it prompts me to also change the time and gives me the option to add a certain number of minutes between each photo.
This is ridiculous. Very 'un-apple-esque'. I don't WANT to change the time, that is a seperate attribute. I want to change date, and that's it.
How can I do this?
It's as if I went into itunes and tried to change and artist name on a whole album and it also asked me to change the album name. Silly.
How can I change JUST the date of a batch of photos??
-Justin

Hi.
There's a plugin that may do what you want. Check out iPhoto Date Shifter from Joe's iPhoto Applescripts. I haven't used it myself but others here have reported that it works.
Regards.

Batch-change date (time)...

I know you can batch-change the date in iPhoto, and there's the option to add X seconds between each photo, but what I need to do is change the time by XX seconds/hours. Basically, this weekend we had two camera shooting a trip we were on. I thought both cameras were synched (clocks) but one camera was off by 12 hours (it was on AM when should have been PM). So, I need to add 12 hours to each photo for the 1 camera. Is there any way to do this via a batch (ie. not manually going through each of the 150+ photos and setting the time) so when I make an album of shots from both camera, sort by date/time, they synch up.
If there's no way to do this in iPhoto, could anyone suggest another application that could do this before importing into iPhoto?
Thanks,
Kristin.

Rather than start a new topic, I'm going to just refer to this one since it's recent and exactly the issue I was trying to solve. My situation is that I bought a new camera in January and still had 2006 on my mind, so all the pictures I've taken this year are off by a year. I used PhotoInfo to change the EXIF data folder by folder in my iPhoto Library folder (by this I mean I had to batch change every folder in Originals/2007 and Modified/2007). 2 folders didn't take the changes, but that's another issue for a different forum.
Most of my pictures now have the correct EXIF data, however iPhoto doesn't show the correct info when I select the menu item Photos>Get Iinfo. Doing some searches here says that the only way to update iPhoto is to reimport the photos with the new EXIF data. My question is how do I do that without screwing everything up? I have originals and modified versions of files that are affected. How do I bring them back in such that if I use the Revert to Original command in the contextual menu that the modified files are still correctly linked to the originals?
A secondary question is whether iPhoto is really the program I want to use. Most of my major changes I make using Photoshop. Recently after making changes in Photoshop as well as a few minor tweaks in iPhoto (I don't remember which order) when I tried to revert to the original it no longer existed. It reverted to a modified file (modified in PS or iPhoto, don't remember which). Since then I've been making a duplicate in iPhoto and then modify that one in PS as well as iPhoto. However, after making modifications in PS I have to save it as a JPG in order to keep it organized with all my photos in iPhoto. It would be nice to keep a PSD copy filed along side it. Should I be using something else besides iPhoto that handles EXIF information and changes seemlessly as well as JPG and PSD (and probably RAW in the future)?
Thanks in advance for any info/tips.

How can i change date and time after importing a file

hello
i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
i believe 2004 is the date i put them on the computer.
Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
it works well in iMovie using the help files:
Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
But as i said i cant import the files in FCP have to import them to iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time are gone and in FCP 2004 is again the date of the file!!!
Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
Jemajoro

OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
Here is another screen shot.
Note that all clips in "2007 August" event have the date of Aug x, 2007.
Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
I think you know this but I am using the following feature:
Go to the sprocket icon under the events.
Select "Group events by date" and then by "group events by year and month"
Thanks again for all the help

How to capture changed data at ALV screen

Hi ALV Experts,
I am using Following method for ALV display :-
CALL METHOD g_alv_grid_0200->set_table_for_first_display
    EXPORTING
      i_bypassing_buffer            = 'X'
      is_layout                          =
      it_toolbar_excluding          =
    CHANGING
      it_outtab                          =
      it_fieldcatalog                   =
CALL METHOD g_alv_grid_0200->set_ready_for_input
    EXPORTING
      i_ready_for_input = '1'.
Now I am changing few values in ALV screen and capturing through following Method :-
CALL METHOD g_alv_grid_0200->check_changed_data
    IMPORTING
      e_valid = l_valid.
THIS ABOVE METHOD STRANGELY CAPTURES CHANGES IN QUANTITY AND DATE FIELDS ONLY AND NOT IN CHARATER FIELDS.
Can somebody suggest how to capture changes of character fields also.
Thanks in Advance,
Chandan

Hi,
Check whether the following logic helps.
p_er_data_changed TYPE REF TO cl_alv_changed_data_protocol.
DATA :
    lwa_mod_cell TYPE lvc_s_modi,
    lwa_mod      TYPE ty_mod.
LOOP AT p_er_data_changed->mt_good_cells INTO lwa_mod_cell.
    lwa_mod-row = lwa_mod_cell-row_id.
    APPEND lwa_mod TO i_mod.
ENDLOOP.
Regards,
Lohitha

How to update changed data in alv grid.

hi experts,
i have a editable alv report how to update the changed data on the grid to database table when i click save.
can anybody tell me how to do this if possible with example.
thanks in advance.
regards,
venu

The code below isn't a working program, but has most of what you should need. Field-symbol <dyn_table> will always have what is in the grid.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
               <dyn_wa>.
DATA: pt_fieldcat TYPE lvc_t_fcat,
      ls_fcat TYPE lvc_s_fcat,
      new_table TYPE REF TO data,
      new_line TYPE REF TO data.
CREATE OBJECT g_custom_container
      EXPORTING container_name = g_container.
CREATE OBJECT g_grid EXPORTING i_parent = g_custom_container.
CLEAR ls_fcat.
ls_fcat-fieldname = 'MATERIAL'.
ls_fcat-datatype = 'CHAR'.
ls_fcat-intlen    = 18.
ls_fcat-outputlen = 18.
ls_fcat-coltext   = 'Material'.
ls_fcat-edit      = 1.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'QUANTITY'.
ls_fcat-datatype = 'INT4'.
ls_fcat-intlen    = 6.
ls_fcat-outputlen = 6.
ls_fcat-coltext   = 'Qty'.
ls_fcat-edit      = 1.
APPEND ls_fcat TO pt_fieldcat.
CALL METHOD cl_alv_table_create=>create_dynamic_table
             EXPORTING
                it_fieldcatalog = pt_fieldcat
             IMPORTING
                ep_table = new_table.
* assign ref variable to a field symbol
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
* data_itab is filled with data that you want in grid
LOOP AT data_itab INTO data_wa.
CLEAR <dyn_wa>.
ASSIGN COMPONENT 'MATERIAL' OF STRUCTURE <dyn_wa> TO <fs>.
<fs> = data_wa-material.
ASSIGN COMPONENT 'QUANTITY' OF STRUCTURE <dyn_wa> TO <fs>.
<fs> = data_wa-quantity.
APPEND <dyn_wa> TO <dyn_table>.
ENDLOOP.
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      i_structure_name              = '<DYN_TABLE>'
      is_variant                    = gs_variant
      i_save                        = 'A'
      i_default                     = 'X'
      is_layout                     = gs_layout
      it_toolbar_excluding          = gt_exclude
    CHANGING
      it_outtab                     = <dyn_table>
      it_fieldcatalog               = pt_fieldcat[]
      it_sort                       = gt_sort[].

How to Batch change dates?

Similar Messages

Maybe you are looking for