How to batch change multiple adjusted images by a fixed amount?

Anyone know of a way to change the adjustment values of multiple previously adjusted images by a fixed amount? For example, if, after adjusting exposure of multiple images by various amounts, I want to lighten them all by 0.5, is there a way to do this? If I lift an exposure adjustment value of 0.5 from one image and stamp it on others that have non-zero values of x, even with the stamp option set to "add" rather than "replace", they all end up with exposure 0.5 rather than x + 0.5.

Nope - no way. but... you can add a different adjustment that does the same thing. For instance if you adjusted the exposure individually and you want to lighten them by a fix amount on top of that you could just add a levels or curves that does the exact same thing.
RB

Similar Messages

  • How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database

    How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the  Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second  image does not  show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.

    I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario. 
    If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over.  Nice effect with much less bandwidth. Easily done globally with CSS code.
    Two examples:
    http://alt-web.com/GALLERY/GalleryTest.php
    http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
    Nancy O.

  • How do you change multiple songs genre at the same time

    How do you change multiple song's genre at the same time with out during them one a time in ITunes  on Windows 8?

    You can select a range of songs by selecting the first, then holding shift when clicking on the last. You can ctrl+click to add or remove from the selection. Once you have a selection press Ctrl+I to Get Info. Type in the new Genre and press OK.
    tt2

  • How to batch change the standard value of routing

    Dear all,
             I meet a problem, and need you help.
            As you know, we can use T-code "CS20"  to batch change a component's quantity in different Bom by a factor.
           for example:  Component a in Fert. A,  quantity change from 6g x 0.9 = 5.4g
                               Component a in Fert. B,  quantity change from 8g x 0.9 = 7.2g
           now, my question is how to Batch change the standard value in routing. (select by work center)  CA85N can select the value, but seems can not batch change by a factor,
           thanks in advance

    It is not a big task for u prasobh...Just play in CEWB for 5-10 mins you will understand everything....
    If you face any issue let me know..
    For ur information I am also an IBM employee...
    Gobi

  • How do you print multiple different images on a single page in preview

    How do you print multiple different images on a single page in preview?

    Chances are no one who saw your question knew the answer.
    Unless you're willing to share the answer you found here, then anyone else like you searching for the problem who comes across this thread will also be unable to thank you for providing the answer too.  

  • How to batch paginate multiple pdf files consecutively?

    How to batch paginate multiple pdf files consecutively?
    Thanks.

    What programming method are you using with the Acrobat SDK?

  • How do I change the raw image to jpeg with element 6

    How do I change the raw image to jpeg using element 6?  I am using a canon 10D camera.

    From the Editor choose:
    File >> Open
    Then navigate to your raw file
    When the image appears in the converter use the sliders to make your raw adjustments, then click open image.
    From the Editor use:
    File >> Save As >> jpeg
     

  • HT2506 How do I change the default image editor from Preview to Graphic Converter?

    How do I change the default image editor from Preview to Graphic Converter?

    I'm assuming you want the default programme to change from Preview to Graphic Converter so that clicking on the file would open Graphic Converter instead of Preview.
    Control click on the file type that you want to open using Graphic Converter. Press Command+I for Get Info. Click on the triangle next to Open With. Select Graphic Converter and Press Change All...

  • How to batch change year only?

    I would like to batch change the year only (leaving all other metadata, to include day and time, the same.  In a recent 5 day shoot I have discovered that my camera was set on 2013 rather than 2014.  Is this possible?  The date, to include year, does not seem to be an option under metadata batch change.  If I select all the photos and then change the year, it seems that all of them will also be set to the exact same day and time.  I am looking for an option other than changing the year on each one separately.  Thanks!

    bobio wrote:
    The result would be that all photos have the exact same date (month/day/year) and exact same time.
    What am I missing?
    The small print! (in the dialog to change the date/time). It says: 'The original date and time of the primary selection is shown below. Adjust it to the correct time and all selected versions will be time-shifted accordingly".
    What it means is based on the time difference you give it for the primary image, it will apply the same difference (time-shift) to all the others.
    Andy

  • How to batch change a date in aperture

    Is it possible to batch change a date in aperture the way I do it in iphoto (command option B)?  I dont want relative dates, I want a group of scanned pictures (negatives) to have the same date, but separated by one second.

    Dale,
    Aperture does not support this. I wrote a little Apple Script to adjust the data and time like iPhoto and posted it on my web page. You may have a look and take this as a starting point. I wrote the script last year; so it has only been tested with Aperture 3.2.4 and Lion, not with the current version: The script is here: Adjust Date and Time in fixed increments
    But no guarantees given for the current Aperture version 3.4.3.
    Regards
    Léonie

  • How do I change the JPEG image size in PSE-12 when opening from RAW

    Switching from PSE-9 to PSE-12. When a JPEG image is opened RAW in PSE-12 the size is 18.72" Wide x 12.48" high 300 DPI. The same image in PSE-9 is 23.4" wide x 15.6" High 240 DPI. How do I get PSE-12 to open the image as in PSE-9?

    Uncheck the boxes at the bottom of the dialog Scale styles and resample Image so that only constrain proportions is checked. If you the change the resolution box from 240 to 300 you will get back to your original dimensions.
    This is a meaningless thing to do, you still have the exact same number of pixels, you have only changed the metadata number in the file for ppi, and your prints are not affected by this number.
    You could also use the same method to change the dimensions to 6 x 4 or 9 x 6 etc.
    There are some cases (actually most cases) where you need to CROP the photo to change the dimensions, when the aspect ratio of the original photos is different than the aspect ratio of the final photo; the specific case in 99jon's example is the only case you ever want to change dimensions using Image->Resize->Image Size, where the aspect ratio doesn't change from 6x4 to 9x6 (or 12x8 or 18x12 or ...), and even then, you could do the same thing simply by telling the printer the size you want, you don't really need to do anything in PSE.

  • How to batch change in new Photo app

    I switched over to the new Photo app. I imported my photos from my iPhone, and then went to batch change the titles (which I use to search for specific pictures and places). I can't find an option anywhere to change anything more than one photo at a time! I uploaded over 200 pictures, I can't make modifications a photo at a time.
    Someone help me please!

    I can't make modifications a photo at a time.
    Someone help me please!
    Batch change the titles in another app before you import the photos  into Photos, for example in iPhoto.
    Or use keywords instead of titles. You can select multiple photos and assign a keyword to all photos at the same time from the Keyword Manager.

  • How to batch PDF multiple emails already saved to system

    Hi everyone,
    I would be very grateful for advice as to whether there is a way to PDF multiple saved emails at once using Abode? I have seen that it is possible to create multiple PDFs at once of emails in Outlook - but is there a way of batch creating multiple PDFs from emails which have already been saved to the system as 'Outlook Items'?
    Whilst I know how to batch PDF Word documents etc, this doesn't seem to be an option in Adobe (we use Adobe XI) for emails. Likewise, if I simply highlight all the emails and right-click 'Convert to Adobe PDF', this replaces the name of each email as 'Memo Style' (whereas it works for Word documents).
    We have many hundreds/thousands of emails saved on our work system as 'Outlook Items' (done before we upgraded systems and were able to save emails directly as PDFs from Outlook), and we need to convert them to PDF for upload to a new database programme, so it would be very helpful indeed if there were a way of avoiding having to convert them all one by one...
    Many thanks in advance,
    Zara

    What programming method are you using with the Acrobat SDK?

  • How to batch process multiple layers to jpegs

    I have over 500 layers of different texts over a simple background image. I need to move through each one of these layers, making only one and the background visible, then doing the same for the next, and saving each out as a separate .jpeg. I know how to batch process the jpegs giving each a different filename, but how do I move through the layers?
    Thanks.

    Hi, Paul--
    You were correct. The normal script didn't work at all. But I'm a bit confused about how to use Layer Saver. I currently have all the texts in groups, labelled 1-50, 51-100, etc. What settings should I use to get it to work?
    Thanks
    J.

  • How do I change the background image for a single tab on the navigation bar

    I'm creating a movie website for TDKR and for the navigation bar, I intend to have a different character for each tab. However, I'm having trouble putting a single image each separate tab. Instead one image appears on each of the tabs. Here's an example of the source and CSS.
    <td width="200"><ul id="navigation"><br />
          <li><a href="../pages/index.html">Home</a></li><br />
          <li><a href="../pages/cast.html">Cast</a></li><br />
          <li><a href="../pages/pictures.html">Pictures</a></li><br />
          <li><a href="../pages/soundtrack.html">Music</a></li><br />
          <li><a href="../pages/interview.html">Interviews</a></li><br />
          <li><a href="../pages/links.html">Links</a></li><br />
        </ul>
        </td>
    #navigation {
              list-style-type: none;
              padding: 0px;
              margin: 0px;
    #navigation li {
              margin: 0px;
              padding: 0px;
              list-style-type: none
    #navigation li a:link, #navigation li a:visited {
              display: block;
              width: 200px;
              height: 100px;
              text-decoration: none;
              text-align: center;
              line-height: 100px;
              font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
              font-weight: bold;
              -webkit-transition: 1000ms ease;
              -moz-transition: 1000ms ease;
              -ms-transition: 1000ms ease;
              -o-transition: 1000ms ease;
              transition: 1000ms ease;
              color: #648AAE;
              background-repeat: no-repeat;
              background-image: url(../Images/gifs/Batman-still-2.gif);
              background-position: center bottom;
              text-transform: uppercase;
              letter-spacing: 0.79em;
              border-radius: 5px;
    #navigation li a:focus, #navigation li a:hover, #navigation li a:active {
              color: #000000;
              background-image: url(../Images/gifs/Batman-animation-2.gif);
              background-repeat: no-repeat;
              background-position: center bottom;
              background-color: #454545;
              border-radius: 25px;
    So, how do I put a single image on each tab (home, cast, pictures, etc). Thank you for your help in advance.

    Assign a class to the item and use CSS to apply an image as in
    <li><a href="../pages/index.html" class="home;">Home</a></li><br />
    <li><a href="../pages/cast.html">Cast</a></li><br />
    <li><a href="../pages/pictures.html">Pictures</a></li><br />
    <li><a href="../pages/soundtrack.html">Music</a></li><br />
    <li><a href="../pages/interview.html">Interviews</a></li><br />
    <li><a href="../pages/links.html">Links</a></li><br />
    and the CSS
    #navigation li a:link.home, #navigation li a:visited.home {
         background-image: url(../Images/gifs/Batman-still-2.gif);

Maybe you are looking for

  • TO check whether import is running

    Hi how to check whether import is running or not.I am using oracle 8.1.7 in solaris 8 .I used ps -ef | grep imp in os level its showing its running i am importing the indexes only no data,When i am checking the freespace in index tablespace its not r

  • Error in EEWB when  a n Extension is changed

    Hello, I need to add some more custom fields in Opportunity tab. There were already some existing fields created using Project Extension(say it is PE1) in EEWB. But I am facing some problems (1) To add the new ones, when I created a new Extension PE2

  • My MacBook will not go to sleep :(

    Hi everybody! I bought my MacBook 6 last december and since then everything goes nice and smooth, however I have been experiencing some trouble with the sleeping mode of the computer. I investigated the issue and it seems that it won't go to sleep if

  • Match not showing up in iTunes

    For some reason, Match is no longer showing up in iTunes. My AppleID is different from my iTunes ID, if that makes a difference. This used to work fine - in fact the Match process successfully completed for over 22,000 tracks. I have no idea "where i

  • Should we call a transaction within RFC

    Hi, I have a scenario like this. There is a portal application where in customers can create inbound delivery. What I am thinking is portal application will invoke a RFC passing the required data. Within the RFC I can write the BDC code for transacti