How to batch rename images with YYYMMDD-City-State, type of format

I want to change the names of my files to YYYMMDD-City-State, type of format.. I tried using the file naming template but all that show on the photos is the date.file extension. What am I doing wrong
Thanks
Mike
Message title was edited by: Brett N

You need one other file name specification - such as original file number - because each file name needs to be unique, and the format Date-City-State alone doesn't create unique file names.
In the Library Module go >Library >Rename photo, and in the box that comes up click on the small triangle on the right of the field. This will bring up the file name editor.
In the file name editor you have to select four specifications for the file name. See screen shot:
Click <Done> and save the preset.

Similar Messages

Custom batch rename files with Aperture 3 in the following format: IMG_0023.cr2 to Smith_YYMMDD_0023.cr2? I cannot find a way to structure the date in Aperture as such, as well as extract only the camera file

Please advise how to custom batch rename files with Aperture 3 in the following format: IMG_0023.cr2 to Smith_120816_0023.cr2? I cannot find a way to structure the date in Aperture as such (YYMMDD), as well as extract only the camera file (0023, for example). Adobe Bridge CS5 can do this, but NONE of the Adobe software is retina optimized, and is terrible to look at.

In Aperture you are limited to renaming files by the entries in the File Naming preset window.
At what point are you looking to rename, import or export? It might be possible to do what you are looking to do external to Aperture either via a script or other software.
regards

How to batch rename images?

Is there a way to batch Rename all images in the LAST Import album ?
Thanks!

ok, I see that it's not possible for now. Submitted Feedback to Apple.
And found Leonie's scripts. Thank you!

How do I batch resize images with different aspect ratios?

How do I batch resize images with different aspect ratios?

poa66 wrote:
Landscape: I want result to be 1960 x 1103 px and 72 ppi whether the original is 300 ppi or 220 ppi and wether it is 2Mb or 10 Mb. Cropped centered top and bottom.
There will be a set of Landscapes that that have a narrower aspect ratio the 1960:1103 that would also need the top and bottom cropped like all Portraits would could be. You need to realize that center cropping Landscape image that have aspect ratios near 1960:1103 will usually produce acceptable compositions. However Cropping wide panoramas and portraits will only produce acceptable landscape 1960:1103 composition occasionally.
Here you will see what happens when image have aspect ratio the do not fit the desired aspect ratio. Where Landscape are forced to portrait and portrait forced to Landscape. Here are two Collage I populated with a mixture of image with different aspect ratios. One collage has all 3:2 Landscape places and the other 2:3 Portrait places.
I create a 1 image 1960x1103 collage 72dpi and create those too. Note the landscape boy foot is cropped off 3:2 is narrow compared to 1960:1103

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

HELP!!!! I have spent hours trying to find out how to embed an image with a link or a Microsoft Word document with a hyperlink built within the document -- not as an attachment! Does ANYONE know the secret? Can it be done, or not! My PC clients do it.

HELP!!!! I have spent hours trying to find out how to embed an image with a link, or embed a Microsoft Word document with a hyperlink built within the document -- not as an attachment into my email -- but where it shows as the email content when opened! Does ANYONE know the secret? Can it be done, or not? My PC clients do it all the time easily. Then I want to be able to send the embedded image/document (not as an attachment, but visable within the email when opened) to many email contacts at once, BUT the individuals receiveing them DO NOT SEE the other email contacts. Cannot seem to be able to find anything on being able to do these 2 tasks.PLEASE, SOMEONE, HELP!!!

Don't know if this applies to Lion, but read here:
http://www.makeuseof.com/tag/create-html-announcement-mail-iweb-mac/

How to make slide images with Dreamweaver CS6?

How to make slide images with Dreamweaver CS6? Please teach me.

Hello
in addition to Jon's hint, I'll send you some links to nice sliders (have fun with the different representations ):
http://sandbox.scriptiny.com/javascript-slideshow/
http://jquery.malsup.com/cycle/
http://wowslider.com/best-jquery-slider-crystal-linear-demo.html
http://www.jcoverflip.com/demo
http://www.jacksasylum.eu/ContentFlow/
http://addyosmani.com/blog/jqueryuicoverflow/
You only need to use the source code to implant these shows there where you want. In my eyes it would be the best that you use first a very new and blank DW file to perform (maybe in LiveView) the one or the other.
Hans-Günter

How to extract Supplier Address add line1, city, state, zip from PO to iPro

Folks:
How to extract Supplier Address add line1, city, state, zip from PO to iPro?

Hi DaveT,
For starters you do not need to set the binding to None (Object > Binding palette). I had this in the example, because originally I didn't want the field to take part in the import XML.
When dealing with data, more often than not you really do want the objects set with a binding.
Using $record are you accessing the imported XML or a data connection? If so I would set up the data connection first and then bind the appropriate fields to that data connection.
The XFA Specification may help: http://partners.adobe.com/public/developer/xml/index_arch.html.
Hope that helps,
Niall

How to batch rename with index/counter all files in a project?

I have a project with files named with an index (I believe that is the correct term). For example, the files are named XX1, XX2, and so on. However, some files have the same name because I imported from two different memory cards, without thinking to set the starting number for the second import into the same project. I would like to batch rename all of the files (masters and versions) with a consecutive index (1, 2, 3, and so on). How can this be done? I have found in the manual the way to do this on import, but not how to correct my mistake now. Thanks!

I would like to batch rename all of the files (masters and versions) with a consecutive index (1, 2, 3, and so on).
Select the images in the project and then use ( from the main Aperture application menu)
Matadata -> Batch Change (Shift-Command-B)
Set the Version Name format to one of the "Custom with Index ..." or "Custom with Counter ..." formats and check "Apply to Master Files". Make sure you disable all other changes that you do not want, like Time Zone correction, or keywords.
Regards
Léonie

Why is bridge cs4 skipping files when batch renaming images?

When batch renaming in bridge, I select all the files and then start with the first image to rename them. Over the last few months, it is randomly skipping images. It will also jump the number that image should have gotten, so typically we can manually go through and rename the file so it will line up properly.
Just wondering why this is happening all of the sudden when it worked perfectly for years!

Sorry Patrick, Did not see the previews before, only saw the thread via
email and they don't show the samples you provide.
After seeing those files it looks definitely like corrupted images. I cannot
imagine Bridge to cause this. Rereading your post, it more looks the result
of a bad functioning write/read process on the external HD or a bad USB
cable.
Assuming you have back up could you test this on either an other HD or a
DVD. Just copy the files again to those devices and retry. That would proof
the fault lies with the external HD.
Could you report back on that?
Thanks for your tips. I tried, BUT didnt solve my problem.
Have you seen how the pictures are distracted ?
They seem hav gotten some kind of alien-verystrange-crazy-adjusments

How to batch rename filenames based on metadata tags

// Hello,
I have a few hundred photos I need to batch rename pulling the info from the metadata caption tags (Each caption is unique).
What I need to do can happen just on export if necessary. I've tried Aperture 2 and Automator but no luck.
Any advice would be great. Thank you,
- Clint of THEY-design

I would like to batch rename all of the files (masters and versions) with a consecutive index (1, 2, 3, and so on).
Select the images in the project and then use ( from the main Aperture application menu)
Matadata -> Batch Change (Shift-Command-B)
Set the Version Name format to one of the "Custom with Index ..." or "Custom with Counter ..." formats and check "Apply to Master Files". Make sure you disable all other changes that you do not want, like Time Zone correction, or keywords.
Regards
Léonie

Batch Renaming Image Files from a list of names

I would like to use the batch rename function in Bridge CS5 to quickly rename newly uploaded image files of our products. I would like to rename the image to it's corresponding product number. The issue is that the product numbers aren't in exact numerical order (ie. the first pic is of product ES2004 and the next one is for ES2012). The product numbers can sometimes end with a letter or a number. The pictures are taken in order of the product numbers on an excel sheet. What's the easiest way to have bridge name the image file to its corresponding part number?

Here is an example script that will do the re-naming also place the original filename into the metadata.
CSV format is fileName,Product IE:
p1020337.jpg,E179562
p1020338.jpg,Z556301
Copy and paste the script into ExtendScript Toolkit (This gets installed with Photoshop)
Open Bridge
Edit > Preferences > Startup Scripts
Click "Reveal My Startup Script"
Save the script into this folder.
Close and restart Bridge and accept the new script.
To use, navigate to the folder with the documents to rename, "Right mouse click Menu" select "Rename to Product" and select your csv file.
#target bridge
if( BridgeTalk.appName == "bridge" ) {
fileNameToProduct = MenuElement.create("command", "Rename to Product", "at the end of Thumbnail");
fileNameToProduct.onSelect = function () {
renameToProduct();
function renameToProduct(){
var Path =app.document.presentationPath;
var descFile = File.openDialog("Open Product File","CSV File(*.csv):*.csv;");
if(descFile == null) return;
descFile.open('r');
var datFile=[];
while(!descFile.eof){
var line = descFile.readln();
if(line.length > 5) datFile.push(line);
descFile.close();
for(var t in datFile){
var str=datFile[t];
str= str.split(',');
var fileName = File(Path+"/"+ str.shift());
var product = str.shift();
if(!fileName.exists) continue;
var ext = fileName.toString().toLowerCase().match(/[^\.]+$/);
var thumb = new Thumbnail(fileName);
var md = thumb.synchronousMetadata;
md.namespace = "http://ns.adobe.com/xap/1.0/mm/";
md.PreservedFileName = thumb.name;
$.sleep(100); //give it time to update the metadata
var newName = product + "." +ext;
fileName.rename(newName);
alert("All done");

How can i Display images with may own table

Hi
I want display images with my own table. How can I use in this query.
SELECT    '<a href="#" onclick="javascript:'
       || 'getImageHeight(''my_img'
       || '#ROWNUM#'');javascript:redirect'
       || '(''f?p=&APP_ID.:212'
       || ':&SESSION.:DISPLAY:NO::P212_IMAGE_ID:'
       || ID
       || ''');">'
       || '<img src="#IMAGE_PREFIX#edit.gif" '
       || 'alt="Edit"></a>' ID,
          '<img id="my_img'
       || '#ROWNUM#" src="#WORKSPACE_IMAGES#'
       || filename
       || '"/>' image
FROM wwv_flow_filesThanks
Nr
Edited by: user10966033 on Sep 28, 2009 1:41 PM

You don't use #workspace_images# since that is for STATIC files, not images in a table..
see this thread for help: Re: Display image from blob
Thank you,
Tony Miller
Webster, TX

How to create an image with a transparent shape

Hi
This should be easy -
The end result I want is this:
a png which is mostly black (or any colour) but with a defined shape in it which is transparent.
I have the shape. I select it. I seem to be able to make a mask from this (a selection which I can copy and move about). But what I can't figure out how
is how to create a new image which is filled except for this masked area which is transparent
Any help gratefully received.
Thanks
--Justin Wyllie

Open a blank, new file with foreground color green
Type text
Open effects palette, and in the drop-down go to bevels, then select "Simple Emboss" - it is the second one in my program. Apply
Still in he effects palette, in the drop-down, go to visibility, select "Hide". Apply
Double click the f icon on the text layer in the layers palette to bring up the Style settings dialog, and add a small stroke to better define the letters.

How to capturing scrolling images with no java controls?

Can somebody help me? I am trying to capture the image of the browser, using the followed code to do it, but I can not take it scrolling the screen. I do not use any control of java in the browser. Does anybody have an idea?
Robot r = new Robot();
image1 = r.createScreenCapture(clippedScreen);
File file = new File("c:\\Csa\\3.9\\Fimages\\"+counter+".jpg");
javax.imageio.ImageIO.createImageOutputStream(file);
ImageIO.write(image1,"jpg",file);
//Scroll the screen
scrollTheScreen ();
//Takes scrolled area
image2 = r.createScreenCapture(new Rectangle(0,666,1280,80));
File file2 = new File("c:\\Csa\\3.9\\Fimages\\"+counter+1+".jpg");
javax.imageio.ImageIO.createImageOutputStream(file2);
ImageIO.write(image2,"jpg",file2);
As you can see I take two parts of the screen but I am having troubles adding the images, I do not know if there is an easier way to do this.
Thank you in advance.

Thanks to anybody, but i found the way on how to capture the image.
1. Take a snapshot of the screen.
2. Scroll the screen pushing the button down.
3. Take the snapshot of the scrolled part of the screen.
4. Scroll the screen pushing the button down.
5. Take the snapshot of the scrolled part of the screen.
6. Compare the 2 last images, if they are equals, stop scrolling, else scroll again.
7. Join the images first, second and third images, to get a single one corresponding to the hole info of the browser.
8. Save the resulting image.
The thing in this problem is to manage the images as RGB components for that you must use the getPixel(col, row, color); method to manipulate the components in matrix and added to a bigger matrix where you join the complete components. Be sure that you manage the 3D matrix correctly, [width of the screen] [height of the screen] [RGB components], i.e.
* This saves just the red component, the green and blue must be saved too.
public int[][] imreadRed(BufferedImage bi)
          Raster r = null;     // * Raster
          int [][] image;     // * Image array
          int imageWidth = bi.getWidth();     // * Image Width
          int imageHeight = bi.getHeight();     // * Image Height
          int[] color = new int[3];     // * array to colors RGB (r -> 0, g -> 1, b -> 2)
          r = bi.getData();
          image = new int[imageHeight][imageWidth];
          for(int row = 0; row < imageHeight; row++)
               for(int col = 0; col < imageWidth; col++)
                    r.getPixel(col, row, color);
                    image[row][col] = color[0];          //Saves the red color to the array image on the first coordinate
          return image;     //Return the array with the red component
     }* This merge the matrix into a bigger one.
public int [][] mergeMatrix (int [][] mat1, int [][] mat2){
         int rowsMat1 = (mat1.length-53), colsMat1 = mat1[0].length,     //mat1.length da los renglones de la matriz height
         rowsMat2 = mat2.length, colsMat2 = mat2[0].length;          //mat1[0].length da las columnas de la matriz width
         int [][] addedMatrix = new int [rowsMat1+rowsMat2][colsMat1];
         for (int row = 0; row < rowsMat1; row++) {
              for (int col = 0; col < colsMat1; col++) {
                   addedMatrix [row] [col] = mat1 [row] [col];
          for (int row=0; row < rowsMat2; row++) {
               for (int col = 0; col < colsMat2; col++) {
                    addedMatrix [rowsMat1+row] [col] = mat2 [row] [col];
         return addedMatrix;
    }* This convert the matrix into an image.
public BufferedImage imwriteComponents (int [][] arrRedImg, int [][] arrGreenImg, int [][] arrBlueImg) {
          int arrayWidth = arrRedImg[0].length;     // * Image Width
          int arrayHeight = arrRedImg.length;     // * Image Height
          BufferedImage completeImage = new BufferedImage(arrayWidth, arrayHeight, BufferedImage.TYPE_INT_RGB);     // Create a BufferedImage with RGB pixels
          WritableRaster wRaster = completeImage.getRaster();     // Create a raster so we can access the BufferedImage pixels
          int [] color = new int [3];     //color variable to save all the components
          //join the 3 matrix in one color type
          for(int row = 0; row < arrayHeight; row++)
               for(int col = 0; col < arrayWidth; col++) {
                    color [0] = arrRedImg [row][col];
                    color [1] = arrGreenImg [row][col];
                    color [2] = arrBlueImg [row][col];
                    wRaster.setPixel(col, row, color);
          return completeImage;     //Return the Buffered image with the red array component
    }That is a solution that I found to this problem, if someone has an easy way to do it please tell us.
Thank you.

How to batch rename images with YYYMMDD-City-State, type of format

Similar Messages

Maybe you are looking for