How to be able to print on reply in color and different font

I want to be able to send e mail relpys in color or a different font.

Do you currently use HTML formatting?
Don't know or unsure?
'Tools' > 'Account Settings' > 'Composition & Addressing' for the mail account
or
'Menu icon' > 'Options' > 'Account Settings' > 'Composition & Addressing'
Select 'Compose messages in HTML format'
click on 'OK'
See second image below as an aid.
If yes, then you should see the 'Formatting bar' in a 'Write' window.
If you cannot see it, maybe it needs to be enabled:
View > Toolbars > Select 'Formatting Bar'
see first image below.
Anything set via the Formatting Bar will only be used in that email.
For helpful info at this link:
* http://en.flossmanuals.net/thunderbird/composing-messages/
There is also an addon which can be used to auto quote colours in eg: Replies.
* https://addons.mozilla.org/en-us/thunderbird/addon/quote-colors/
download to desktop or downloads folder.
How to install:
In Thunderbird
Tools > Addons
or
Menu icon > addons
click on gear wheel icon and select 'Install addon from file'
see third image below.
Locate the file you just downloaded and click on 'Open'.
You may need to restart Thunderbird.

Similar Messages

So, my Macbook Pro with retina display only prints in black and white. My printer, officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

In the Print dialog, select the Color Matching tab and then select Vendor Matching.

How do I lighten up a sequence without loosing color and contrast?

how do I lighten up a sequence without loosing color and contrast?

What have you tired so far? Color correction can be a bit of a challenge until you get comfortable with it.
Also, unless your sequence is one uniform scene, it would probably be better to go on a clip by clip basis to make these adjustments - but here is one quick way to do it for the whole sequence, which may or may not give you the results you are looking for:
Apply an Adjustment Layer that covers the duration of your sequence.
Apply the Fast Color Corrector to the Adjustment Layer.
In the settings for the Fast Color Corrector, bring up the Input Gray level a bit (this will lighten the scene) and raise the Input Black Level (this will help restore some of the contrast). If you need to make the bright portions of the scene brighter, bring down the Input White Level.
Go slowly with small adjustments and adjust to taste. You'll need to work back and forth on those controls to get the best compromise.
If you want more color, increase the Saturation a small amount.
MtD

HP LaserJet Pro 200 color MFP M276 - not able to print black when any color is empty

Hi,
We have 2x HP LaserJet Pro 200 color MFP M276n in our office, both have firmware date code 20121026.
The problem is that when ever one of the colored toner cartridges gets empty it fails to print even black & white documents and freezes in the replace cartridge screen.
In system supplies settings it is configured to print only black when colored supplies are below very low threshold limit.
Since the printer is freezing in the warning screen and only powering it off and on helps to bring it back alive, it seems that this is a software or firmware issue. I didnt find any firmware updates for this model though.
It doesnt make any sense that it is not possible to use the printer at all when only one of colored cartridges is empty. Any thoughts on how to solve this issue are welcome.

Hi,
The firmware that you have mentioned is old and the latest version available is
Version
20131216
it is always advisable to update the printer to the latest firmware. Please update the firmware form the given link
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-4&cc=us&dlc=en&lc=en...
Hope this helps....
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

How to make menu-item of current page appear in a different font color?

Hi,
My menu-bar works just fine. Hovering the links I get the text to take display the desired color. Now I want the menu-item of the selected page to show a third color.
With live-code enabled in Dreamweaver CS6, I can see the following code being generated by the Dynamic menu:
<script type="text/javascript" src="/CatalystScripts/Java_DynMenusSelectedCSS.js"></script><div id="cat_549633_divs"><ul id="nav_549633"><li class="selected"><a href="/home.html">Home</a></li><li><a href="/leistungen.html">Leistungen</a></li><li><a href="/uhrenservice.html">Uhrenservice</a></li><li><a href="/versteigerungen.html">Versteigerungen</a></li><li><a href="/diamanten.html">Diamanten</a></li><li><a href="/ueber_uns.html">Über uns</a></li><li><a href="/kontakt.html">Kontakt</a></li></ul></div><script type="text/javascript">catSetSelectedCSSItem('nav_549633');</script>
The class .selected is being created in the first list-item (home) as this is the current page.
And here is my CSS:
#nav_549633 {
          float: right;
          list-style-type: none;
          padding-top: 5px;
#nav_549633 li {
          float: left;
          text-align: left;
#nav_549633 li a {
          color:white;
          text-decoration: none;
          margin: 0 27px 0 0;
          font-size: 13px;
          text-transform: uppercase;
#nav_549633 li a:hover {
          color: yellow;
.selected {
          color: green;
The font color green does not appear. It is still white.
In order to see if the class is "working" I tried some other attributes, that DO work!
.selected {
color: green;
padding: 20px
background-color: blue;
In this case, the item appears as a blue box with 20px-padding, just as expected - but the font-color is still white.
Can anyone help me?
Regards,
Herman

Hi Mario,
Here's the link to my site:
http://grootaartseuronics.businesscatalyst.com/index.html
I have found a solution myself for 2 of the 3 questions i had:
I have deleted/changed this div: #nav_1371057 li li
And created a few new ones:
#nav_1371057 li li a, #nav_1371057 li li a:visited (To control the link en visited link colors in the sub-menu other than the root-menu)
#nav_1371057 li li a:hover (to control the hover in the sub-menu other than the root-menu if nessesary)
#nav_1371057 li li.selected a (to control the selected link and let the link change color or bolder like in my case)
Here are the CSS styles I used:
#nav_1371057 li li.selected a { /*Dit veranderd de dikte (bold) van de geselecteerde link in het submenu, dus de pagina waar je bent*/
font-weight:bolder;
#nav_1371057 li li a, #nav_1371057 li li a:visited{
background: #006;
color:#ffffff;
#nav_1371057 li li a:hover{
background: #999;
color:#ffffff;
Only thing i can't figure out is how I can change/control the color of the arrow which is black now. And i want to make it blue.
Thanks,
Frank

How to increase the size of Photoshop Elements 8 MENU and PANEL fonts?

How do I increase the size of Adobe Photoshop Elements 8 MENU, PANEL and other fonts used in Photoshop Editor?
Does anyone know of registry fix or other solution?
Thanks
FYI:
I've increased windows XP display fonts to 140 dpi, only Photoshop Elements 8 fonts did NOT increase, such as menu, panel and drop down fonts -- they remain very small and almost unreadable. All other programs menu fonts did increase.

I’m sure Adobe try to make their products as accessible as possible to all sections of the community although by its very nature certain adjustments to fine detail require the use of a mouse.
However where possible keyboard short cuts are provided, as an alternative to the drop down menus. For example to adjust levels rather than clicking Enhancements>>Lighting>>Levels you can simply press Ctr+L.
Importantly it’s possible to zoom in and out on any image in the Editor using Ctr plus or Ctr minus.
That's the only suggestion I can think of.

C6180 printer prints bad photos, poor color and striped help!

color photos print with stripes and coloe does mot match color on monitor c6180 printer

Hello milehigh,
Welcome to the HP Forums!
I understand you're receiving different colors and has stripes when you're printing photos. I will do my best to assist you! If you print different document are you receiving the same results? Please print a self test page from your printer: (This information is stated here.)
Press Setup .
Press the down arrow button to highlight Print Report , and then press OK .
Press the down arrow button to highlight Self-Test Report , and then press OK .
The HP All-in-One prints a self-test report.
If you different colors from this page, then please follow this entire HP document on Wrong Colors. Try cleaning the printhead a couple of times until you receive satisfactory quality. I will be looking forward to hearing from you.
Have a great night!
I worked on behalf of HP.

How can I share a printer among a wired Mac and a wireless laptop?

I find this extremely frustrating, but I can't figure out how to share my printer for the life of me.
My Mac Pro is connected to my router and when my girlfriend is here she connects her computer to the internet via my router wirelessly/WiFi. She has 10.4.0 and I have 10.5.5. On both computers printing sharing is enabled. Shouldn't one of our computers be able to see the other on a network? Or is there something I'm completely missing? All I want is for her to SOMEHOW connect to my computer so she can print stuff and I dont have to go behind my computer, unplug the USB, and plug it into hers. Even though I am in the printer discussion area, I even want to be able to share files too. It should be relatively simple but I don't understand what I'm supposed to do and I can't even find any sort of "setup wizard" that directs me in the direction to go. Sorry but I've been using Windows for 10 years and I'm just completely lost in the mac world now Thanks

Hello and welcome to the Apple forums.
With regards to sharing your printer, you need to open System Preferences > Sharing and then tick printer sharing. In the right hand pane you will also be able to select which printer to share (if you only have one then it will probably already be selected). Now your partner should be able to open their System Preferences > Print and Fax and click the + button to add a printer. If they then select the Default browser view, your printer share should be visible. If it is not visible, then please reply as there may be other factors that are causing this.
Also, with regards to file sharing, while you were in System Preferences > Sharing you would have seen Personal File Sharing. Enable this setting so that the other Mac can see your Mac on the network. If they select the Guest account when connecting to your Mac, the will have by default access to your Public folder for viewing documents and your Drop Box for sending files to you.
One last thing. You mentioned the other Mac running 10.4.0. The latest version of 10.4 (Tiger) is 11. So, if this Mac is really at 10.4.0, then you may want to update it as this may contribute to compatibility issues between the two Mac's.
PaHu

How do I turn my printer from 'offline' to 'online' and why does it keep going 'offline'?

Why does it keep saying my printer is 'offline' and there is no communication between computer and printer? How do I turn it 'online'? There doesn't seem to be an option to do so.
Thank you.

Sorry that you are having a problem with the printer being offline.
Try to perform a hard reset on the printer. Unplug the power cord from the back. Leave it out for 30 seconds and plug it back in.
Are you connected USB or wireless?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

How to print CWiGraph control in white background and different font?

I have a CWiGraph control in dialog. I look at your example for printing the CWiGraph control, but I don't want print the exact image like showing on the screen, I like to print the graph in white background, not the same color like graph frame and plot area on the screen. Also I want to change a label font to show on the paper. How to do that?
Thanks.
mliu

First_knight wrote:
please tell me am i thinking right
about this method: setImageableArea(.....)
public void setImageableArea(double x, double y, double width, double height);
like I said, I've tried this method and it doesn't seem to do anything.
the width=the JFrame Width,the height=the JFrame Height right?actually, when printing, 72 points (printing version of pixels) = 1 inch, so to do WYSIWYG, you need width = JFrameWidth * 72.0 / Toolkit.getToolkit().getScreenResolution. Ditto with height
upper left beginningx(0)---------------------------200--------------------------------600-----------------------------------y(1000)upper right beginningyou need to do something like PageSetup.getImageableX and do Graphics.translate(x,y);
also, if your page width = 720, that = 10 inches - that's a wide page (unless its in landscape)
so if i want the JFrame To Be In The Center Of The Page I Would Choose From x=200 ,y=600 depending that frame width is 400Actually, it would be 300 - 700 in your example
Because when i tried to use:setImageableArea(200, 600, 400, 200);like the above code
no changes occurs in the printed paperYes. You need to offset the Graphics object

How do I troubleshoot "open print cartridge door, clear jam and press ok" ?

I have opened the cartridge printer door, by lifting the top glass compartment and removing the 6" by 3" black cover....I do not
see any jam? which is the error message I am getting....I have removed the rear piece, the front trays and even with all the light
now shining through the machine I still don't see a jam?? I have wiped alot of ink (with alcohol) from the cartridge mechanism area, because it would almost appear that it is getting stuck.....Pls help...very fustrated, lots of work to do and can't do anything till I solve this problem
HP Officejet Pro 8500 Premier

Hi BJordan,
You can try following some other steps here - Paper Jam
If still fails, then have this printer serviced and replaced. You can call HP Tech Support.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

Need to print in bold and different fonts

Hi all,
I want the output of an ABAP classical report(ex. monthly Sales Report) to be printed in bold letters and font size to be increased.
Thanks in advance

Hi lasers, If you are printing direct from the scanned image try the following. Select print - select options - Printer Properties - Advanced - There will be an option to print in greyscale in this menu. I hope this helps. Please let me know if I can help with anything else. Many Thanks,Francheska

How come the first paragraph of each question is in a different font?

This seems to be the case with all questions posted on the developer exchange. Its been kinda annoying since the upgrade.

Hi Brian,
Thank you for the feedback on the inconsistent font. This problem is scheduled to be addressed for the next site update.
Best Regards,
Wilbur Shen
National Instruments

How do i connect my printer to my Pad and Phone

how do I connect my printer to my I Pad and I Phone

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use these to fix
iPad: http://www.apple.com/support/ipad/assistant/airprint/
iPhone: http://www.apple.com/support/iphone/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
More info from this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
and this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HOW CAN I DOUBLE SIDED PRINTING ON MY HP ENVY 4500 SERIES PRINTER

I recently bought my HP ENVY 4500 series printer and love it. The only problem I have is I can seem to work out how to do double sided printing, cant see any options and the booklet doesnt tell me...maybe I am missing something. Please help! I hate wasting paper

have you already installed the software for the MAC?
what is the OSX version of your MAC?

How to be able to print on reply in color and different font

Similar Messages

Maybe you are looking for