How to be most popular and some finance questions.

Hi i'm interested how to make business podcasts.
As i see that's not that hard. Producing podcast is pretty simple if i have a content prepaired for iTunes.
But still i have some questions:
1) What do i need to be on the top rated list? How the ratings really work?
2) Can i sell podcasts somehow?
Thanks for answers.
ibook g4 Mac OS X (10.4.8)

Voxdel,
1) Being a top rated podcast really comes down to having quality content and production, and being someone that people want to hear. There is no secret meta tags, or some secret technique to being a top rated podcast and getting on the featured list. If you're good, give the people something they want to hear, then popularity will come.
To be featured, according to Apple, is you have to have a minimum of 3 podcast episodes listed, have visually appealing album artwork, then getting on the featured podcast list is just a matter of staff approval (favorites). They review and select their favorites to feature based on what people are listening to and what they think provides good content. There is no real way to get on the list, other than producing a quality podcast that the staff feels is worthy of featuring.
2.) Can you sell your podcast? You can try, but the real question is, what would make someone want to pay for your podcast, when there are so many others out there with similar information for free? Unless you have a name established, it can be very difficult to really get people willing to pay for your podcast. What you should be thinking, is how can you use your podcast to promote other aspects of your business. If you put out a podcast that provides quality content, and leaves people wanting more, then you can direct them to your site to sell other products or services. But don't turn your podcast into a commercial where you are constantly plugging your products or services. People will tire of that and know you are just trying to sell them.
Give them good information, show them you know what you are talking about, and they will want to learn more. An alternative to selling your podcast to make money, is to sell advertising on your podcast. As you become popular for your quality content and giving away information, and your listener base grows, you can do much like radio stations do, and charge to put on a little commercial for other products.
Hope this helps.
Todd
P.S. Ralph, you misspelled "mortgage" in your web name you gave here. Link name you have doesn't work.
MacBook Pro Mac OS X (10.4.8)

Similar Messages

How to obtain most popular cities from my users table

Hi.
I've got a 'users' table:
USER_ID --- CITY_ID
1 ---- 32
2 ---- 20
3----- 32
4 ---- 32
5 ----- 17
I would like to obtain the most popular cities from this table, and the number of occurrences. Is this possible to make it easy with an SQL statement?
Thx

Here is an example using the emp demo table -
SQL> select deptno, count(*)
2 from emp
3 group by deptno
4 order by count(*) desc;
    DEPTNO   COUNT(*)
        30          6
        20          5
        10          3You can find full details of aggregate functions like count, and group by and order by in the SQL Reference manual.

How to remove "Most Visited" and "Getting Started"

These two items recently appeared under the search tool bar. Don't want either of them

* "Most Visited" and "Recently Bookmarked" and "Recent Tags" are examples of so called [[Smart Bookmarks folders|Smart Bookmarks folders]] and are not real existing folders.
* Smart folders show a list created by a query of the places.sqlite database that stores bookmarks and history in Firefox.
* Smart folder lists show a maximum of 10 entries by default.
* Bookmarks and history items that show up in a smart folder list are stored elsewhere in another folder and any changes made are applied to the real bookmark or history item.
*https://support.mozilla.org/kb/Restore+the+default+Smart+Bookmarks+Folders

Njawin - jcomgen and some general questions

Hi.
I'm currently evaluating njawin, and some questions came up:
Will there be a command line interface for jcomgen?
The interactive GUI isn't really suitable for an automated build process.
njawin compared to jawin:
njawin seems to be more advanced, but there's no source available.
Does anybody know if this will change in the future?
regards,
roman

Carl,
The njawin distribution available for "evaluation" download around the web comes with no license, as it is a version of OLE for Java (OLEJA), a commercial product, which was developed before OLEJA went retail.
One thing you'll notice is that OLEJA and Njawin have remarkably similar APIs. If your application's functionality does not have very complex requirements, you can simply replace all references to "oleja" with "njawin", and all references to "compose" with "develop". This holds true for the generated .java files, the .xml file, etc. I am not sure if OLEJA introduces or uses more APIs than the ones that appeared in Njawin, but for my application, this approach was successful.
One other thing to keep in mind is that I don't see why you'd actually need to build your sources into a jar, if you simply include them in a larger package as part of your application's source code. Just put njawin.jar, njawin.dll, and yourdll.dll on the build path and the rest of your problems should be solved for you. Keep in mind that, since OLEJA is commercialized, it's been debugged a lot (as the author has stated in mailing lists) and that means Njawin could have some unexpected problems. In this case you should thoroughly test your usage of Njawin with your application to be sure it runs well in your environment. Errors that could potentially crash your JVM may appear when certain functionality (especially multi-threaded functionality) inside your ActiveX control is executed.
Regards
Sean McNamara

How to remove a folder and some links from start-menu

Hi!
An application (Kaspersky Antivirus) is installed on quite
some Win2K-SP-Workstations by the Kaspersky Administration
Kit (with its own installer).
With this installation an entry to the start-menu is made
and this entry shall be removed by Zfd 3.2-SP3. I ran
through some tests with an application-object (run as secure
system user), which only intent was to remove this entry.
First I tried by "Distribution Options - Application Files"
to remove the folder "C:\Dokumente und Einstellungen\All
Users\Startmen\Programme\Kaspersky Anti-Virus 6.0 for
Windows Workstations". Then I tried a "Distribution Script"
with "RD /S /Q "C:\Dokumente und Einstellungen\All
Users\Startmen\Programme\Kaspersky Anti-Virus 6.0 for
Windows Workstations"", which also failed.
Do I miss something? Where could I check the results of
those tries to get a better feeling on what is going wrong
here?
Thanks in advance.
Karl

When doing the job with an *.bat-file it works, when going
with the distribution script it does not. Are all the
windows/dos/batch commands available in the distribution
script option?
Karl
>>> Rolf Lidvall<[email protected]> 25.03.2009 11:37 >>>
>> Does that mean that, in case there are some files in
>that
>> folder, I have to delete those files first?
>
>Yes.
>
>> Can this whole
>> procedere be done by one app-object with keeping the
>order
>> like delete files first and then the folder as last
>thing?
>
>I think it's safest to do that with a script. I'd use the
>distribution
>script option.
>
>
>Regards
>Rolf Lidvall
>Swedish Radio (Ltd)

How to remove Suspend ,Abort and some more from Bulk Actions

Hi
Does anybody have an idea as how to remove action such as Suspend,Abort but not all from Bulk actions in enterprise server.I am using 10.3.1 version.
Any kind of suggestion will be greatly appreciated.
Ritu

What are you trying to accomplish here? By the sounds of it you want a way to be able to bulk abort, but not have the user be allowed to do this to individual instances...
If so, I'd recommend setting the activities to NOT be abortable or suspendable, and add a Grab activity in a support role. Then make the grab, be abortable. This makes it so that a 'super user' (ie one with support role), can go in, select several instances, grab them, then abort them but normal users can not.
Just a thought...
HTH
-Kevin

How can I stop Mozilla and some extensions from opening new tabs every time I open firefox, even with no updates?

I'm using Firefox 9.0.1 on a Windows 7 laptop. Since upgrading to 9.0 and then 9.0.1 Mozilla and Speed Dial open new tabs as if they've been updated, even though there has been no update. Colorful tabs 8.0 did it as well, but I disabled it.

Do you have BitDefender (2010 e.g.) with its toolbar? If yes, remove it because the BD toolbar is known to be buggy and cause this issue (add-on compatibility check at each Firefox start).
And report here the BD toolbar version you have.

How to on a MacBook Pro-some switcher questions

I bought my first Mac in March of this year but i am still learning all the time about it.
I have some questions about Mac OSX at the moment i am designing a website for my sister she has bought her own domain with Fasthosts and i have been designing her website mainly in Windows XP via bootcamp because i do not know how to save in html on my Mac. Do i need to buy software so that i can design websites on my Mac so that i can save in html? I want to hand encode and then save in html? Is there a application in Mac that will allow me to do this? In Windows i can encode by hand in notepad and just save in html very simply. Also, Is there a way to edit what i have already done in Windows on my Mac. I tried using Text-edit and that does not bring up a plain text version of the code when i open up what i have already done.
Also, how do i resize a picture using my Mac. I often use Paint to do this because i have not figured how to do this on a Mac yet?
I have been wondering about this for a while also but how do i refresh a page using Mac OS. In windows you press F5 to refresh a page but what do you do with a Mac?
I am finding that the Mac does not cater as well for people who do not want to buy extra software to use it for example to have a Paint programme that is decent you need to buy extra software wheras on Windows XP Paint comes free of charge.

I bought my first Mac in March of this year but i am
still learning all the time about it.
Welcome to Macs!!! I hope you're enjoying them!
I have some questions about Mac OSX at the moment i
am designing a website for my sister she has bought
her own domain with Fasthosts and i have been
designing her website mainly in Windows XP via
bootcamp because i do not know how to save in html on
my Mac. Do i need to buy software so that i can
design websites on my Mac so that i can save in html?
Two sided question - yes and no. I have never purchased any but there are some for purchase... I forget their names and I'm sure another user will chime in with them.
You can use both iWeb or Nvu. iWeb is more drag and drop, but you can publish your site to a folder, and then send that to your ftp server using a program called Cyberduck. Nvu is a free HTML editor... very similar to Microsoft Frontpage. It's decent, i've had it a while ago, but it's a bit slow and has a few bugs still. But what do you expect for free?!?!
I want to hand encode and then save in html? Is there
a application in Mac that will allow me to do this?
As a new web designer, I don't know what you mean by hand encode... But I think NVU will help you out with that.
In Windows i can encode by hand in notepad and just
save in html very simply.
Yes - NVU you can edit the html code inside the program, or you can open the html codes in Text Edit and edit them that way.
Also, Is there a way to
edit what i have already done in Windows on my Mac.
I tried using Text-edit and that does not bring up a
plain text version of the code when i open up what i
have already done.
Again, you can open the html in NVU and do it there.
Also, how do i resize a picture using my Mac. I often
use Paint to do this because i have not figured how
to do this on a Mac yet?
Paint?!?!?!?! Oh boy! In many programs there is the "inspector" button (like iWeb) and you can do it easily.
In iPhoto you can click on File-->Export--> And rescale the image in the size you want.
I have been wondering about this for a while also but
how do i refresh a page using Mac OS. In windows you
press F5 to refresh a page but what do you do with a
Mac?
Refresh? You mean like safari? Apple+R
I am finding that the Mac does not cater as well for
people who do not want to buy extra software to use
it for example to have a Paint programme that is
decent you need to buy extra software wheras on
Windows XP Paint comes free of charge.
Really?? Paint is terrible. Any program that windows gives you for free, apple has a better counterpart available for download on the internet for free as well.
You can also try GraphicConverter. This was previously free on powerbooks but was forgotten on Intel Macs... probably because they didn't have a universal binary at the time. There is a free trial, give it a shot.

Web dynpro ALV and some other questions

Hi All,
I have couple of question for experts.
I am very much new into Web Dynpro world, and i have one web dynpro application built by my old colleague.
I want to add search feature into the application so that out of 1000 records i could search one based on some field value, how can we achieve that ?
I have read lot abot ALV list in web dynpro, How to find that specific approach has been used into particular web dynpro application or not ?
Thanks for your time for reading my question and hope to get some response..
Pranav.

Hi Pranav,
Hope the following helps you.
Searching for a record based on some field value
You can have an input field (bound to a context attribute) in your view. Whatever you type in the field will now be associated with the context attribute in your context. Place a button on your view. Define an action for this button (e.g. SEARCH), in the property onAction of the button. Now, in the action handler for the button (ONACTIONSEARCH), access the context attribute (can be done using WD Code Wizard). Then using your business logic, get the date into another context attribute, which can be displayed in the view using a textview (or textviews)
Find whether ALV is used in your WD Application
Go to your WD Component, in the used components you should find a use for component SALV_WD_TABLE. Also, in one of the views, the Interface View TABLE of the ALV component will be embedded in its ViewContainerUIElement. This information can be found in the Window of your own WD Component.
Regards,
Neha
PS:Reward if helpful

Planning 11.1.1.3 application comparison, and some BR questions

1) Does anyone know how to compare 2 versions of the same Classic 11.1.1.3 Planning apps? Hiearchies, forms? Lets say, I have QA and DEV versions, and I want to see if they are in sync/identical? I remember that Ver 9 had Manage Models option in Administration menu that with some tricking was doing comparison of the two models (their file xtracts), but can't find anything like that in v 11.
2) Anyone knows the way to easily export the code of BRs into a file? The export XML doesn't always have the readable code in it, so its not reliable. Any suggestions?
3) Speaking of BRs, I've realised that in order to re-import BRs using XML export-import, I need first to delete all (to-be-reimported) BRs form my target server. Doing it one by one in EAS can be time consuming. Any easier way to delete BRs in bulks?
Thanks,
smilo

For exporting the rules to a flat file have a read of :- Re: Exporting Hyperion Business Rules as Text files
Deleting classic business rules has always been a pain, if only they developed a multi select, well it won't happen now because calc mangler is around.
Cheers
John
http://john-goodwin.blogspot.com/

FTP Proxy not being denied (and some other questions)

I have a simple BM37+NW6SP5 test server for testing rules prior to moving them to production (2x BM38+NW65SP6). Recently we tried to block all access to FTP sites and allow only a select group of users access. The rules on the test proxy looked something like this:
1. Action: Deny / Source: Any / Access: URL / Dest: SurfControl
2. Action: Allow / Source: FTP_User_Group / Access: FTP Proxy / Dest: Any
3. Action: Allow / Source: WWW_User_Group / Access: URL / Dest: Any URL
Default Rule:
4. Action: Deny / Source: Any / Access: Any / Dest: Any
Yet with this setup, anybody in the WWW_User_Group (but not in the FTP_User_Group) was able to access FTP. I temporarily closed the hole by doing this ruleset:
1. Action: Deny / Source: Any / Access: URL / Dest: SurfControl
2. Action: Allow / Source: FTP_User_Group / Access: FTP Proxy / Dest: Any
3. Action: Deny / Source: Any / Access: FTP Proxy / Dest: Any
4. Action: Allow / Source: WWW_User_Group / Access: URL / Dest: Any URL
Default Rule:
5. Action: Deny / Source: Any / Access: Any / Dest: Any
I don't understand why I have to explicitly deny access to FTP Proxy for this to work. I think the rule that grants access to URL for WWW_User_Group is also allowing FTP access. If I turn that rule into a Deny rule in the first ruleset, it deny's all FTP (as well as all HTTP).
Also, we are using SurfControl to block access to certain categories. I read that the URL rule only affects port 80 requests (which would seem weird when its affecting my ftp proxy over port 21 above). How would I go about blocking those same categories over HTTPS?
Finally, does anybody have any general guidelines on how many rules should exist in a typical medium business BM environment (assuming modern hardware)? I'm trying to get the customer to avoid adding so many adhoc rules as the production environment is pretty complex which is why I am testing on a test proxy with few rules to avoid accidental rule overlap. I'm going to have to do an audit of their existing production environment and prefer the KISS principle when it comes to rule definitions.
P.S. Since most sites require both a HTTP and HTTPS rule, almost every desired "rule" in BM needs to be repeated twice to allow (or deny) secure communication as most websites switch to SSL from the launcher (non-ssl) parent page. The rulebase expands quite quickly and gets confusing due to this.

cam wrote:
> Perhaps I should have said that this was being tested using normal dos
> FTP. Open a command prompt, type FTP proxyservername, open
> [email protected](for example), etc... no browser involved, but
> that does bring up another point of WHY do I need a dozen rules to block
> access to a single site over a single protocol?
Then you're doing something wrong or you're not telling the whole
settings. your rule was calling nds groups so you need authentication
enable and the checkbox for " Authenticate only when user......."
unchecked. Then the syntax once you open the connection to the ftp proxy
is ndsusername@[email protected]. In your example there is not
nds authentication.
you do not need ANY rule to block a single site. The default rule will
do for you. If you do not make an specific allow one, then sites will be
blocked.
Even if I use a web
> browser and access it as ftp://, it should use the FTP protocol, not
> the HTTP protocol.
When your browser is configure to go thru proxy and you access a ftp
site, you'll hit two situations with IE:
1. With default settings, IE will use its miniftp client build in and
try to access the ftp site directly. that can fail if there is a
firewall stopping this traffic as it will bypass bm.
2. If the option "enable ftp folder view" is unchecked and the "use pasv
ftp..." checked, IE will encapsulate ftp traffic into http and send it
to border, to the http proxy. So bm gets http traffic, remove the http
envelope and makes a ftp connection to the ftp server. But to apply
rules, this is a http traffic thru http proxy. A single LAN trace on the
server will show you this behavior
Firefox always uses the configured proxy settings.
> Regarding the point you bring up about HTTPS, I can't wrap my mind
> around how if this is true, we can still keep things secure and safe.
> Let's look at a single website, www.novell.com. The novell.com domain
> is not listed in a SurfControl category filter that places would
> normally block. Therefore most approved internet users would be able
> to access it. Now let's say you go to www.novell.com and log into the
> user portal; it switches to HTTPS! Without an allow port 443 rule,
> this should fail then. However, if that's the case, I need to know
> that this website needs access to port 443, so I am forced to manage
> another rule for port 443. This rules destination filter will grow to
> thousands if not millions of websites as almost every valid website
> known to man requires HTTPS if they want you to create a login on their
> site. This is unmanageable.
You;re exaggerating here.You will need indeed an port 443 rule but this
is how it works. SSL traffic and normal http traffic are two very
different things. But with a single allow all port 443 you can
accomplish here. Read below
> So you're solution is to create a Destination ALL rule for Port 443.
> While this removes the need to manage a list of millions of websites,
> it now opens you to all the vicious websites (domains listed in blocked
> categories in SurfControl for example) which use https. My company pays
> Websense thousands of dollars a year to block certain categories of
> websites, but if any of those websites use HTTPS, based on what you are
> telling me it seems it is impossible to block it using SurfControl since
> the Deny Port rule does not allow a Destination of ANY third party
> filter.
The allow all port 443 it has to be placed after the surfcontrol one and
after other third party rule or websense or whatever you use to block
specific sites. that means that the allow all port 443 only will be hit
if surfcontrol and other rules above this one did not find a match. If a
match is find, bm applies the rule and stop reading so if it hits a site
that websense or SF blocks, it will block it, regardless of the allow
all port 443.
Also you can make an allow port 443 with a domain name destination, just
for specific destination
if sites are on the blocked category for SF then it will blocked. You
can go to SF website an check it and if it is not blocked then is a SF
problem not a bm and you should contact them.
Gonzalo

Aspect ratio and some other questions...

I haven't purchased an Apple TV yet (emphasizing YET) but I'm very interested and may make the leap tomorrow. I've been reading a lot on the discussion boards but still had a few questions. I have a widescreen 46" Samsung LCD TV that I'm planning to use as my primary TV. The wife and I have rented a few movies from the iTunes store and noticed the aspect ratio leaves the picture fairly small. I wasn't expecting a full screen picture, but something a little more than barely half the screen. Will the Apple TV improve the picture size or is this what I'm going to expect going forward? Any pictures would be great!
Second, as far as I've read, you cannot connect an external hard drive to the Apple TV itself, but if I hook it to my PowerBook and use my external HDD as my iTunes Library source, will everything work fairly seamlessly? I have an Airport Extreme base station so I'm hoping things work pretty well.
Next, between the 40GB and 160GB Apple TV's -- is there an overwhelming reason to get one or another?
And last (I think), I've started ripping some of my old movies using Handbrake and was curious how the picture comes out on an Apple TV after extracting from DVD's. I've been using the standard "Apple TV" settings within Handbrake.
Thanks in advance for the help, I appreciate it! BTW, definitely a BIG fan of the iTunes rentals!
Brad

I don't know what monitor you have but there is a fair chance it has a resolution of at least 1600 x 1000 which is why your 640 x 480 rental doesn't fill it although itunes does have an option tto show movies full screen.
Tv's typically have much lower resolutions than monitors and the output from the tv is matched to such resolutions. In short your rentals will fill the screen on your tv when played on the tv.
Many of us here use external drives attached to either a desktop or a laptop to hold out libraries, yes they work flawlessly.
We can't actually discuss methods for ripping commercial DVD's but needless to say handbrake does give good quality exports, I've used it on a few non commercial discs and found the results to be more or less the same quality as the original. In addition to the  preset I always enable 2 pass encoding.

Imac G3 clock not working - and some other questions

This iMac is starting to act slow, especially browsing with FireFox. Also, the clock will not hold its time. Won't browse at all with IE or Safari. Well, Safari will sorta work - but for some reason automatically downloads FAD messages on desktop.
Does this computer just need a new battery for the clock? Also, will that battery also improve the general sluggishness?
What battery does it need and how can I replace it?
Also, regarding browsing - there are less and less browsers that work with this computer. I'd like to upgrade (currently using 10.2.8) but not sure if it can handle an upgrade. Will it actually start handling even slower because an upgraded OS is wearing it down? Any suggestions? More computer info listed below:
Proc. 500 MHZ PowerPC Gc
iMac version 22.14
Mem 348 MB
OS Version 10.2.8
Thanks for any feedback/suggestions on both the clock issue and improving browsing sluggishness.

You can run the top command in the terminal to get an idea about system and memory usage.
Macintosh-HD -> Applications -> Utilities -> Terminal
type
top -u
then press enter and you will some memory stats. The display is hard to digest, but if you watch for awhile (days) you will get some hints.
Look for this line. The number in yours will be different.
PhysMem: 58.8M wired, 101M active, 271M inactive, 431M used, 336M free
so
wired + active + inactive = used
used + free = installed memory (768 off by a meg )
336M free means total unused memory. I have lots of free memory.
The next line
VM: 4.22G + 118M 22499(0) pageins, 0(0) pageouts
VM is virtual memory.
You notice I have 0(0) pageouts which says that I am not using my harddrive for extra memory space. 0 is the total (0) is this time period
Hence, I would not benefit from more memory.
You could post your number here for comments.
Mac OS 10.2 doesn't do the best job of cleaning up after itself. Perhaps a little housekeeping would help.
Here is what Apple says, "Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode."
http://docs.info.apple.com/article.html?artnum=107388
Perhaps you should try running the periodic jobs. These jobs are run daily weekly monthly to do general system maintenance. These jobs will clean up the logs.
Macintosh-HD -> Applications -> Utilities -> Terminal
sudo periodic daily weekly monthly
Note: Enter your logon password. You need to be logoned on with an administrator id.
Maybe you should try one of these general clean up programs. You might backup your system before pounding too hard. I'd repair permissions as suggested earlier.
Yasu is a “Universal Binary” Macintosh utility that performs maintenance routines and clears the many cache files used by OS X. Yasu was designed to be a simple, first line of attack for a workstation that has started “acting up.” More often than not, a thorough purge of the cache files of a Mac will bring its behavior back into line.
http://jimmitchell.org/projects/yasu/
OnyX allows you to run misc tasks of system maintenance, to configure certain hidden parameters of the Finder, Dock, Safari, Dashboard, Expose, Disk Utility... to delete cache, to remove a certain number of files and folders that may become cumbersome, to see the detailed info of your configuration, to preview the different logs and CrashReporter reports, and more.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
Robert

Streaming problems and some other questions

1) i've read that some people have problems streaming youtube as well as me. but mine is terrible, i can't stream at all. my curve 8900 can barely stream with wifi.......why is this? is there any updates? ALSO, i have version 4.6, can i update this to a more recent blackberry version? if so, where? thank you! x p.s. i just tried with wifi now, and it doesn't stream at all, it says i may have either javascript turned off or old version of adobe flash player........
2) can we not have adobe flash?...because i can't stream any video off any website...
3) through an e-mail i was sent a pdf file and i opened it and i'm not sure if i saved it. if i did save it, where could it be stored? i've looked everywhere!
4) under 'setup' there is an 'interactive' button. what i that for?
5) BLUETOOTH PROBLEM: i've paired it and tried (when to media and done the 'recieve using bluetooth') and it didn't work. so i deleted the pair and tried it without, and still nothing. i've tried fixing some options in settings but still nothing...i think i played with the options a bit too much now...lol. but is there an ideas? please help. also, is there anything in options that i have changed which might be hindering the process (i.e. firewall)?
p.s. i read both manuals that came in the both and the help they provide is all common sense!...they need a more detailed manual in my opinion. Also, is there a number i can call for support/help for my questions regarding my 8900?
thank you! x
Message Edited by mtpac2001 on 08-02-2009 10:03 PM
Message Edited by mtpac2001 on 08-02-2009 10:04 PM

mtpac2001 wrote:
1) i've read that some people have problems streaming youtube as well as me. but mine is terrible, i can't stream at all. my curve 8900 can barely stream with wifi.......why is this?
Many possible reasons -- poor coverage area, old OS, trying to use the full YouTube rather than their mobile site, etc.
mtpac2001 wrote:
is there any updates? ALSO, i have version 4.6, can i update this to a more recent blackberry version? if so, where?
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
mtpac2001 wrote:
2) can we not have adobe flash?...because i can't stream any video off any website...
No. Flash is not available for BB's at the present time. I'm pretty sure that your "any" words are overstated -- perhaps the sites you try cannot stream, but there are others who can stream, so any is a bit over the top.
mtpac2001 wrote:
3) through an e-mail i was sent a pdf file and i opened it and i'm not sure if i saved it. if i did save it, where could it be stored? i've looked everywhere!
Just send yourself another attachment...then pay attention when you save it, then go there and that should be the same place that older PDF should have gone.
mtpac2001 wrote:
4) under 'setup' there is an 'interactive' button. what i that for?
Sorry, no clue...might be something specific from your carrier.
mtpac2001 wrote:
p.s. i read both manuals that came in the both and the help they provide is all common sense!...they need a more detailed manual in my opinion. Also, is there a number i can call for support/help for my questions regarding my 8900?
thank you! x
Your support is, by contract, provided by your carrier...that is how it works. For general use of the devices, these forums are, frankly, the best place as the folks here are other users just like you.
Cheers!
Message Edited by sdgardne on 08-02-2009 02:06 PM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Understanding Flex: Can it be used without Flash-knowledge, and some other questions

Hi.
I'm trying to understand how Flex works. My understanding is
that Flex is like the integration link between Flash-content and
.NET-applications on the web. We need rich interface on our
.NET-applications - without ActionScript-coding required from the
programmer's side.
Can this be acheived with Flex alone?
What is Coldfusion required for? Can Flex be used without it
to create the rich web interface?
Are basic components included and ready-to-be-used? What if
special components are needed? E.g. multi-level menu-tree or some
special data grid. Can this be developed by a Flash-programmer and
used as a "generic" component?
My reason for choosing this would be that we easily can
acheive great web-layouts that are Flash-based, and that interact
with our .NET-applications. Is this the product I'm looking for?
Thanks alot in advance! :D

It is absolutely possible to create complex custom components
in Flex and without FlashPro.
Flex can communicate with the server in several ways.
WebService: SOAP-based
HTTPService: XML over HTTP, (like REST and AJAX)
RemoteObject: uses proprietary amf protocol, needs Java or CF
on back-end
There are some others like URLLoader and sockets.
Unless you need your back end functionality to be generally
available to anonymous third parties (hence the wsdl), WebServices
are unnecessarily complex.
I prefer HTTPService, I post xml strings in the normal
name=value format to the server and use e4x xml as the resultFormat
in flex.
Even though you said "roughly", that is still an impossible
question to answer, there are too many variables: On the back-end,
do you need to install a database? Create the schema? or is some of
that part done already? On the front-end, How will you navigate the
records? See, too many variables.
The communication part is by far the easiest. Almost
negligible, although the Flash Player security can cause some
head-scratching!
Tracy

How to be most popular and some finance questions.

Similar Messages

Maybe you are looking for