How to become ready for SOA as a basis administrator?

Seems SOA is overwhelming.
I am in a big SAP implementation project and on the wall I see many SOA charts.
However, my daily work NEVER  has anything to do with SOA.
How to become ready for SOA as a basis administrator?
Thanks!

Hi,
Read all what is available about SOA on SDN. This is the best to do now.
You can also practice the configuration of a SAP Netweaver system as a producer or consumer of web services.
Regards,
Olivier

Similar Messages

  • How to become ready for BPX as a basis admin?

    Thanks if you can point the direction.
    Thanks!

    Hi,
    Read all what is available about SOA on SDN. This is the best to do now.
    You can also practice the configuration of a SAP Netweaver system as a producer or consumer of web services.
    Regards,
    Olivier

  • How long between Ready for Sale and in the App Store?

    Yesterday both of my Apps in iTunes Connect had their status changed to "Ready For Sale" around 10am. How long should it be before I see them in the App Store?

    I have heard it takes up to 24 hours to show on itunes.
    Did you get an email when yours became "ready for sale"?
    As of yesterday, mine was in review, but this morning itunes connect is down for me, so who knows what it is now. Just wondering if I need to keep checking, or if they will send me an email when it becomes "ready for sale"

  • How to configure SSL for SOA BPM/Webcenter 11.1.1.3

    Hi,
    I have installed BPM 11.1.1.3 and Webcenter 11.1.1.3 in the same HOME. First installed BPM and then extended the domain for webcenter. During the installation I selected the SSL check-box also. Now how do I disable the HTTP and enable only HTTPS. I need to configure SSL can someone please provide some steps or a link to some document around SSL configuration of BPM/Webcenter 11.1.1.3.
    Thanks

    Hi,
    Anyone I too am looking for the same info.
    Thanks

  • How do i share content with my family without becoming responsible for payment of everybody's purchases? with familysharing i mean, not home sharing

    how do i share content with my family without becoming responsible for payment of everybody's purchases?
    with familysharing i mean, not home sharing
    i have set up a familyshare for my parents and 3 siblings, all mid twenties. everybody is used to paying their own way. how do i make that continue to be the case and still keep the sharing facility open?
    e.g I don't want to pay for my sisters' music purchases - half of it i don't like - but would like access to it now and then.

    -> Home Sharing is different than logging into the iTunes store.
    You enable Home Sharing using one AppleID. Doesn't matter which you use but all devices must use the same AppleID for Home Sharing.

  • How do I create a data set ready for a batch input session

    Hi:
    I don't know how to create a data set ready for an BATCH-INPUT SESSION.I know that with the function BDC_INSERT make de input online, but my requirement is that generate the data set and left to the user get in de SM35 transaccion and decide to him if it's execute or not. I have all the information in a BDCDATA table.
    Any clue would be great!!

    You just have to do:
    BDC_OPEN_GROUP (Open new batch)
    BUILD BDC DATA (Your own code)
    BDC_INSERT (Insert BDC data you have built in step 2)
    BDC_CLOSE_GROUP (Close batch)
    This will just create a new batch and it can be processed in SM35.
    To build BDC data:
    LOOP AT your_input_table.
    <<here you have to use the code generated from recording in  trasaction SHDB>> (i.e. bdc_dynpro and bdc_field performs)
    ENDLOOP.

  • Help- how do I make images ready for web gallery??

    Hi,
    I am trying to create a photo gallery of images within Bridge using the Adobe Web Gallery feature. I have the images I want to use in a folder.What steps do I need to take to get the images saved in the correct format and file size? Also, what files sizes do you recommend for a web gallery? I need to make medium to large thumbnails & large images (when clicked). Here's what I am thinking I need in terms of getting this right:
    use Adobe Photoshop/Bridge to create the gallery
    jpg for photos
    gif for solid colors
    file size under 2MB (full image), under 20-30K for (thumbnails), total size of all images under 50K (no more than 50 sec. to download)
    screen size: 984x728
    screen resolution: 72dpi
    If you could help me in any way, shape or form concerning making my images ready for a web gallery that would be most helpful. And if you can refer me to any resources on making a web gallery that'd be awesome. Thank you!
    ashmic19

    Thanks for the link Curt Y that video is really helpful. After looking through some materials I had I figured out how to optimize my images. So I don't need any help anymore. But thanks to all who viewed this and thanks Curt Y for the video!
    ashmic19

  • How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

    How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

    Hi el_giclee,
    Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
    I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
    Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
    It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
    Michael

  • How I can find standard SOA services for SAP HR?

    How I can find standard SOA services for SAP HR?
    There is a list of services?

    how about tcode SOAMANAGER ?
    Good luck.

  • Stuck on waiting for device to become ready...

    I did a slide show on iDVD now I'm trying to burn it on a Phillips dvd but it reads waiting for device to become ready. this continues & it does not burn the dvd. I tried the save as disk image but the same thing happens. the utility was no help on getting it started

    Hi Don't:
    Just assuming here (which is always dangerous)...
    Is there any audio associated with your slideshow?
    Sue
    PS Verbatim DVD-R (you are using DVD-R, right?) is about the best there is....

  • [Restore] "Waiting for iPod to become Ready"? [ver 1.2 iTunes 7.0]

    I just updated my iTunes from version 6.0.5 to 7.0. This install also updated my iPod. My iPod is no longer read by my computer or any other. ***? Now when I attmept to connect it to any Mac it freezes up and fails to mount. Come on apple. Also, why the is there no longer an iPod preference section in the new iTunes. I keep trying to Restore the firmware, but I keep getting the "Waiting for iPod to become ready" message.
    Attempted solutions:
    • Re-installing iTunes 7.0 (no luck)
    • Resetting the iPod (no luck)
    • Forcing the iPod into disk mode (no luck)
    • Re-installing iPod software (iPod won't mount...so that didn't work)
    HELP!!!

    You may want to look at this:
    http://docs.info.apple.com/article.html?artnum=61705
    You may want to look at this:
    http://docs.info.apple.com/article.html?artnum=61705
    I had the same problem and was able to fix it by following the directions on resetting the iPod, renaming the iPod and also ensuring that I removed any files that might not be understood by the iPod from the 'notes' folder on the iPod (if you have enabled disk access):
    http://discussions.apple.com/message.jspa?messageID=3111498#3111498
    PS: If you need to get out of the 'Do not disconnect' screen so that you can apply these changes you need to hold down the 'menu' and 'select' or center button until you see the Apple logo. When the iPod mount you can proceed to reset the iPod to original settings which will erase everything from the iPod but not your iTunes library on your computer

  • "Waiting for RAID Controller F/W to become ready..."

    Hello
    Lately I have been getting this message more often than not -- before Windows 7 (not) booting:  "Waiting for RAID Controller F/W to become ready..."
    Any suggestions?
    I have a
    Areca  ARC-1680D-IX 12-ports SAS RAID
    Thanks
    Rowby

    We sell and use these now:
    http://www.intel.com/products/server/raid-controllers/RS2BL080/RS2BL080-overview.htm
    http://www.intel.com/products/server/raid-controllers/RS2PI008/RS2PI008-overview.htm
    But they have more here: http://www.intel.com/products/server/raid/index.htm
    They also use LSI chips like Areca and Atto.
    Eric
    ADK

  • I have become a full-time student. How do I adjust for Illustrator and how do I purchase InDesign?

    I have become a full-time student. How do I adjust for Illustrator and how do I purchase InDesign?

    Don't buy of eBay better to go direct to adobe try
    https://www.adobe.com/education/student-eligibility-guide.edu.html
    Regards
    Vividi

  • I forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?

    i forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?

    I'm not quite sure what you want - if you want an overview of all open windows, use the F key.. Otherwise please post back and be more specific.

  • Anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, less cheaper

    anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, with add costs?

    There are two versions of the current iPad, the WiFi only (which will work anywhere in the world, but only connect to WiFi networks) and the 3G/4G model. The latter will connect to 3G networks worldwide, as I understand it, but the only 4G networks it can connect to are in the US and Canada.

Maybe you are looking for

  • Storage Thread Count

    I'm trying to write up advice for Storage node thread count. Obviously, this is dependent of the machines - we have 48G 8processor machines, running 20 x2G Storage nodes and 2 x 2G Proxy nodes. My understand is that when you don't have a cache-store

  • IDVD problems: on the blink

    iDVD gone on the blink P I've been burning DVDs with no problem, then all of a sudden every time I try to burn a DVD it quits when it gets to the burn stage. I get two dialogue boxes: The Application iDVD quit unexpectedly... and You inserted a blank

  • Can we apply join between two internal tables?

    Itab has fields A,B,C. Data: begin of itab occurs 1,          A  type I,          B type I,          C type I,          End of itab. Jtab has fields A, I, J. Data: begin of itab occurs 1,          A  type I,          I type I,          J type I,     

  • The home buttom of my iphone 4 is not working and im already without coverage from apple care, where can i fix this problem and how much will it be?

    THE HOME BUTTOM OF MY IPHONE 4 IS NOT WORKING AND I'M NOT COVERED WITH THE APPLE CARE SINCE THIS EXPIRED, WHERE DO I TAKE MY PHONE TO BE FIXED AND HOW MUCH IS THAT GOING TO COST?

  • Log report

    Can you pls let me know I m using TOAD version 9 I would like to see what are all the queries which ran on 30 th of April Is there any way to See this in Toad or ORacle..? I queried v$sql..it did nt show the full list... :( Thanks a lot Edited by: us