How to bill the customer as per billing plan according to a contract

Hello All
Plz help  me out I am  stuck, scenerio is I am doing a contract with Perodic billing plan for every month. in contract the billing date shows rightly. but when I do vf01 for first month billing it shows all the billing plan days . but when I select first date for billing system allows me to save the bill. but later when I again go for vf01 for next month billing from putting the same contract no it shows a log stating that "paritially processed". Plz show me the path how to bill th customer on every month. is my process is right or any alternative Please suggest. I am waiting eagerly. thankx in advance.

Hi  Mohan ,
In the periodic billing plan, you can adjust conditions to the length of
the period, only if you use the following calculation type for the
condition:
             M     quantity - monthly price
             N     quantity - yearly price
             Q     quantity - daily price
             P     quantity - weekly price
In this case the pricing determins correctly a prorated value
according to the lenght of the period in the billing plan.
Please check your conditions and use in a periodic billing plan
only conditions which have the mentioned calculation type. Otherwise
you will get every time the same value for a 'long' period or a
'short' period.
92655 - Billing plan: billing yearly prices on monthly basis
Regards
Goviind
Edited by: Govindraj Kulkarni on Feb 20, 2012 10:05 AM

Similar Messages

  • How to create the custom infotypes in Campus Management

    Hi,
    Please help me how to create the custom infotypes in campus management.
    Thanks,
    Lakshmi.

    Hi,
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Cheers,
    vasavi.
    kindly reward if helpful.

  • How to create the custom table?

    Hi, how to create the custom table and how to integrate the table with defferent R/3?
    my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
    Tks
    DPk

    how to create the custom table
    There are two approach in creating a table.
    1. Bottom-up approach
    2. Top-down approach.
    Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
    1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
    2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
    3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
    4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
    5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
    6. Go to data element page and save, check and activate.
    7. Go to main table page and save, check, and activate.
    8. Also, you have to save the technical settings of the table.
    The table is now ready for operation. You can use it in your program or you can use it to enter information.
    Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
    It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
    SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
    how to integrate the table with defferent R/3
    Transport the Table to the another server/client/qas/prd
    Kanagaraja L

  • How to use the customer types in customer master data

    how to use the customer types in customer master data?
    menu path is Extras -> account group info -> customer types

    hi,
    This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
    default sp ,consumer.
    See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
    I hope this clarifies your quiery.Reward points if so.
    Thanking you,
    Best regards,
    R.Srinivasan

  • How to see the customer purchase order acknowledgement ?

    How to see the customer purchase order acknowledgement ?
    in that PO ACK where we see the UOM and Qty ?
    thanks & regards,
    Srikanth.

    hi
    Customer Purchase Order is nothing but the Sales Order in your system
    Customer Po acknowledgement is nothing but the Acknowledgement that is sent out (output type BA00) to the Customer after the Sales Order has been created.
    Note: Purchase is to Customer - Sales is to you as the Vendor.
    cheers
    Nandu
    Edited by: Nanda Kumar Veeraraghavan on Apr 1, 2008 12:11 AM

  • How to download the custom Tables to xls from the system?

    Hi
    How to download the custom Tables to xls from the system?
    Vijay

    Hi,
    Goto SE11, in the table name field give Z*, and click on display. You will get the list of Z tables.
    Regards,
    Prabu

  • How to download the custom Reports to xls from the system?

    Hi
    How to download the custom Reports to xls from the system?
    I know the t code SE38 for reports.
    Vijay

    Hi
    Here the programa name is nothing but a report name???
    Vijay

  • How to get the customized page's xml version ?

    Hi All,
    I have created some fields (of style 'MessageChoice', 'MessageLovInput') through personalization in a page and after that i navigated to the middle-tier where our MDS repository holding all the page's source file (in form of XXXXPG.xml) to get the updated version of the same page in xml version.
    But i couldn't get the latest version of page's XML file instead i found the old standard file only.
    Please help me in getting the file and guide me the path if it got stored somewhere in the architecture.
    Thank You,
    Thiyagarajan

    Dear Anoop,
    Thanks for your immediate response.
    Could you please pour your ideas how to store the custom personalizations in Unix box through Functional Administrator responsibility ?
    And one more question is as you said it will be stored in the form of xml but i have searched the page in the middle tier where it(standard one) got stored, but unable to find any one. How to find the xml file after doing the personalizations and in which path ?
    Waiting for your reply.
    Thank You,
    Thiyagarajan

  • How to access the Custom Data type variable given in Expression edit control To and From LabVIEW

    Hello, I would like to know how to access the custom data type variable given in the Espression Edit Control from LabVIEW and vice-versa
    Say, the FileGlobals.Reference_Handle (Custom Data Type Variable) contains the
    VISA I/O session (Which in turn contains VISA_DeviceName: String, Session: Number),
    Channel1: Number and
    Channel2: Number
    I am expecting the user to give FileGlobals.Reference_Handle as the input at the ExpressionEdit Control in the edit screen of the VI Call.
    I would like to know how to get the values of this custom data type to LabVIEW?
    Say, if I have the Cluster in LabVIEW like VISA I/O session (Deive Name and Session Number), Channel1 and Channel2
    how do i need to set this cluster to the Custom Data type variable in TestStand?
    Thanks and Regards
    Prakash 

    Hi,
    TestStand to LabVIEW: i didnt understand what you r trying to achieve. But if you are using references, Use Property nodes and Invoke nodes to achieve what you want in LabVIEW.
     LabVIEW to TestStand: check the image below: You need to click the button next to 'container'. I have used a cluster output in the VI.
    Hope this helps
    .......^___________________^
    ....../ '---_BOT ____________ ]
    ...../_==O;;;;;;;;_______.:/
    Attachments:
    1.JPG ‏187 KB

  • How to use the custom control ?

    Hi Friends,
    plz help to use of  custom control in screen painter ?
    and how to use the custom control ?
    Thanking you.
    Regards,
    Subash.

    HI,
    Screen Elements
    A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
    You can use the following elements:
    ·        Text fields
    Display elements, which cannot be changed either by the user or by the ABAP program.
    ·        Input/output fields and templates
    Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
    ·        Dropdown list boxes
    Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
    ·        Checkbox elements
    Special input/output fields that the user can either select (value ‘X’) or deselect (value SPACE). Checkbox elements can be linked with function codes.
    ·        Radio button elements
    Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
    ·        Pushbuttons
    Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
    ·        Frame
    Pure display elements that group together elements on the screen, such as radio button groups.
    ·        Subscreens
    Area on the screen in which you can place another screen.
    ·        Table controls
    Tabular input/output fields.
    ·        Tabstrip controls
    Areas on the screen in which you can switch between various pages.
    ·        Custom Controls
    Areas on the screen in which you can display controls. Controls are software components of the presentation server.
    ·        Status icons
    Display elements, indicating the status of the application program.
    ·        OK field
    Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
    All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
    with regards,
    sowjanyagosala

  • How to display the customer VAT TIN number in the PLD

    Hi All,
            Can anybody tell me how to get the customer's VAT TIN number in the PLD.
            Plz help me, i will reward u with max points.
    Thanks,
    Suresh Yerra

    Hi Suresh Yerra,
    Pls do this.this will surely help you.
    Go to concerned PLD. eg: AR Invoice
    draw one database field.In table field use alt + click in drop down
    this will give u all the tables in the database.
    Now u choose the AR Invoice tax extension table - choose tax id 11 for TIN and tax id 1 for CST
    like this yu can get any tax information.check the tax info. is filled in the BP master data ( accounting tab-tax information)
    Reward points if helpful
    Rgds,
    Suresh Kannan

  • How to find the customer exits for a particular transaction

    hi
    how to find the customer exits for a particular transaction

    Hi jyothsna vankadari ,
    ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
    I would suggest you to go for BADI.
    Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
    1) Goto se24 (Display class cl_exithandler)
    2) Double click on the method GET_INSTANCE.
    3) Put a break point at Line no.25 (CASE sy-subrc).
    Now
    4) Execute SAP standard transaction
    5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
    6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    7) This way you will find all the BADIs called on click of any button in any transaction.
    Regards,
    Clemens

  • How to check the Customizing setting in Different SAP CRM System

    Hello Guru's
    I want to know how to check the Customizing setting in Different system i.e (Sandbox,Development,Quality,Production)
    I mean to say that i was to check all the 4 system are in same line in all the aspects or sink with each orther
    Thanks in advance
    With Regards
    Sreeram

    hi
    to synchronise all the clients in the CRM,u need to structure ur transport request,that is whenever a request has been made,the same has been transported to all the clients or not
    Go to T-Code -SE09 and copy all released transport request from each client from Sandbox,Development,Quality,Production and match all request manually.
    this is just a way other may be to see manually all the settings in all the clients
    best regards
    ashish

  • How to find the customer ledger account display for profit centerwise

    Dear All,
    how to find the customer ledger account display for profit centerwise
    Pleas give your valuable suggestion
    Regards
    Vishwajeet Sharma

    Hi
    check the tables
    A959
    A962
    A997
    The assignment depends on so many things
    with respect to which transaction you wants the PRCTR field for KUNNR?
    Regards
    Anji

  • Hi Apple, I was developed an app that impemented In-App purchage, But how I manage the customer reinstall after the trial priod complets. thanking you.

    Hi Apple,
    I was developed an app that impemented In-App purchage,
    But how I manage the customer to reinstall after the trial priod complets.
    Thanking you.

    These forums are user supported.
    So are the iOS Dev Center forums [ https://devforums.apple.com/community/ios ], although staffers do drop in as volunteers from time to time.

Maybe you are looking for