How to bind JNDI in WSAD

I am new to WSAD.
I need call a web service from J2EE project.
How can I bind web service's JNDI in WSAD?
Is it the right place to add the variables in the server's variable tab?
How can I access the JNDI value after binding it?
Thanks

I still didn't get it.
In WSAD 5.1,
How can I add JNDI name/value in a server environment?
I know several place I can add variables, in the Variable tab as Institution Variables, in the environment tab as System Properties, or in the admin console.
What's different among these three places? How can I retrieve them?

Similar Messages

How to config JNDI in WSAD

Hi
My problem is i downloaded some code on JNDI from net and i am trying to use it in WSAD web application consisting of Servlets and JSP's and i don�t know how to configure that DataSource and all lookups in WSAD Environment. So if some one understood what i am trying to do pls help me in getting it.
Thanx in advance.

Check the Websphere documentation.

How to change JNDI service provider for EJB's?

I need EJBean's home interface to be bound to another JNDI provider, not Weblogic.
How can I do it?
The most simple solution is not working: to specify <jndi-name> in weblogic-ejb-jar.xml
for bean as "xxx:bean_name".
By JNDI rules for such names context factory with name com.sun.jndi.url.xxx.xxxURLContextFactory
will be used. But for Weblogic this does not work. An exception is thrown during
bean deployment -
javax.management.MalformedObjectNameException: ObjectName: Invalid value -> xxx:bean_name
at javax.management.ObjectName.validateAndAdd(ObjectName.java:440) at javax.management.ObjectName.initObjectName(ObjectName.java:409)
at javax.management.ObjectName.<init>(ObjectName.java:254) at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:196)
at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:90)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:83)
at weblogic.ejb20.internal.BaseEJBHomeMBean.<init>(BaseEJBHomeMBean.java:33) ......................

This is not an answer on my
question - My questions was: how to force a Welogic EJB Container to BIND EJBean's
home interface to another JNDI Service provider, not Weblogic.
But you wrote how to use JNDI in general - I already know how to use it :)))
Phil.
"VSK" <[email protected]> wrote:
Hi
Have a look at the code below
private Context getInitialContext () throws NamingException
String from = "CtxHelper::getInitialContext ";
String webLogicHostUrl = t3://SERVERNAME:9001
Logger.debug(from, "Begin Method", 3);
Hashtable h = System.getProperties();
h.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory
h.put(Context.PROVIDER_URL, webLogicHostUrl);
return new InitialContext(h);
} //end getInitialContext
This way we will get the InitailContext and then do a jndi lookup using
the
Context object as follows
ctx.lookup..........
Now in the above code replace weblogic.jndi.WLInitialContextFactory by
ur
provider.
Hope this helps.
-VKS
"Phil Peshin" <[email protected]> wrote in message
news:[email protected]...
I need EJBean's home interface to be bound to another JNDI provider,not
Weblogic.
How can I do it?
The most simple solution is not working: to specify <jndi-name> inweblogic-ejb-jar.xml
for bean as "xxx:bean_name".
By JNDI rules for such names context factory with namecom.sun.jndi.url.xxx.xxxURLContextFactory
will be used. But for Weblogic this does not work. An exception isthrown
during
bean deployment -
javax.management.MalformedObjectNameException: ObjectName: Invalidvalue -> xxx:bean_name
at javax.management.ObjectName.validateAndAdd(ObjectName.java:440)at
javax.management.ObjectName.initObjectName(ObjectName.java:409)
at javax.management.ObjectName.<init>(ObjectName.java:254) atweblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:196)
atweblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelega
te.java:90)
atweblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate
..java:83)
atweblogic.ejb20.internal.BaseEJBHomeMBean.<init>(BaseEJBHomeMBean.java:33)

How to bind Temporary Queue to Context in FioranoMQ

I have two JMS clients sending messages to each other via FioranoMQ.
And one client creates a temporary queue, for example
Temporary Queue auction1Queue = qSession.createTemporaryQueue();
My question is how to bind this auction1Queue to Context? so that the client on the side can lookup
I don't use the usual way of set/getJMSReplyTo() to message because it will change the logic of my program.
With SonicMQ, I just simply bind it like this
jndi.bind("auction1", auction1Queue);
then the other side just need to jndi.lookup("auction1")
and with ActiveMQ it is even simpler
Both side just need to lookup for the same name like that
jndi.lookup("dynamicQueues/auction1");
http://activemq.apache.org/jndi-support.html
But FioranoMQ does not support both of the above operations.
I don't really know how to do the same thing with FioranoMQ.
Hope that somebody can help me.
Thank you very much
Edited by: dannytrinh1 on Apr 16, 2009 5:53 AM

How to look up for temporary queue by using temporary queue name using JNDI context. I am getting lookup faild error" for temporary queue. While trying to bind this temporary queue name to jndi , it is throwing an exception as: notsupported exception. I am using ActiveMQ 5.2.
See below sample code...
tq = session.createTemporaryQueue();
jndiContext.bind("queue.MyTempQueue",tq);

How to Bind a Combo Box so that it retrieves and display content corresponding to the Id in a link table and populates itself with the data in the main table?

I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.

Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun

How to bind two Items?

Hello,
on my page I have 2 items:checkbox and text area. How to bind its work processes together? For example, when checkbox is checked then Text area is disable and when not then enable.
Thanks' for help.
Karina.

hi karina--
this, too, is javascript question. please see my answer to your previous post...
Multiselect list (LOV)
...regards,
raj

How to bind a UI element to the context

Hi Experts,
 I have a problem binding UI element to the context. In my code i have to create TabStrips dynamically and under this tabstrip number of UI elements would be there. For this i have a code like this..
IWDTransparentContainer theActionContainer =(IWDTransparentContainer)view.getElement("RootUIElementContainer");
 IWDTabStrip ts = (IWDTabStrip) view.createElement(IWDTabStrip.class,"TabStrip");
 IWDTab tab1 = (IWDTab) view.createElement(IWDTab.class,"Tab1");
 IWDInputField in = (IWDInputField) view.createElement(IWDInputField.class,"in");
 IWDCaption header1 = (IWDCaption) view.createElement(IWDCaption.class,"Header1");
 header1.setText("Tab1");
 tab1.setContent(in);
 ts.addTab(tab1);
 IWDTab tab2 = (IWDTab) view.createElement(IWDTab.class,"Tab2");
 IWDInputField in2 = (IWDInputField) view.createElement(IWDInputField.class,"in2");
 IWDCaption header2 = (IWDCaption) view.createElement(IWDCaption.class,"Header2");
 header2.setText("Tab2");
 tab2.setHeader(header2);
 ts.addTab(tab2);
 theActionContainer.addChild(ts);
when i run this code it is giving following exceptions..
The initial exception that caused the request to fail, was:
 com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Property 'value' of AbstractInputField with id 'in' in view 'LoginView' must be bound to the context
 at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.AbstractInputField.getValue(AbstractInputField.java:1260)
 at com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.InputFieldAdapter.getValue(InputFieldAdapter.java:582)
 at com.sap.tc.ur.renderer.ie6.InputFieldRenderer.render(InputFieldRenderer.java:56)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:435)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:134)
 ... 63 more
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Property 'value' of AbstractInputField with id 'in' in view 'LoginView' must be bound to the context
 at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.AbstractInputField.getValue(AbstractInputField.java:1260)
 at com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.InputFieldAdapter.getValue(InputFieldAdapter.java:582)
 at com.sap.tc.ur.renderer.ie6.InputFieldRenderer.render(InputFieldRenderer.java:56)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:435)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:134)
 at com.sap.tc.ur.renderer.ie6.TabStripRenderer.renderTabStripItemContentFragment(TabStripRenderer.java:1867)
 at com.sap.tc.ur.renderer.ie6.TabStripRenderer.renderTabStripFragment(TabStripRenderer.java:838)
From these exceptions what i understood is, i need to bind these UI elements to context.
 Can any body tell me how to bind a UI element to the context if I understood the exceptions correct..
Thanks in Advance,
Murthy.

HI,
lets say Ctx is your context attribute,
IWDAttributeInfo attrInfo = wdContext.getNodeInfo.getAttribute("Ctx");
then , as per your code,
IWDInputField in = (IWDInputField) view.createElement(IWDInputField.class,"in");
in.bindValue(attrInfo);
if your contex attribute is child of some other node then do like this,
IWDAttributeInfo attrInfo = wdContext.getNodeInfo.getChildNode("SalesOrder",0)getAttribute("Ctx");
//this is when Ctx is child of node SalesOrder, and we are taking Ctx from its 0th element
then ,
IWDInputField in = (IWDInputField) view.createElement(IWDInputField.class,"in");
in.bindValue(attrInfo);
include this in your code ,
let me know if you face any problem
regards
reward points if it helps

How to bind an aggregated list to a variable in an IN or ANY clause

Hello, and thank you for helping -
I have a process that involves a parameter assertion, the result of which is a string for an IN or ANY clause. I am not able to figure out how to bind the result of the assertion to to executable SQL. The actual business process is long and laborious and, I decided, not worth explaining for the purpose of this forum. I have abstracted the process into some dummy data. The goal is to bind v_any_condition to :a. I could certainly build the SQL without the binding, but I would be very interested to know just the same what I am missing here (I'm sure something simple, or just a basic SQL rules that I have missed).
Thanks!
DECLARE
-- The goal is to bind v_any_condition in an ANY clause
v_any_condition VARCHAR2(30) DEFAULT '4,9,d'; -- the three rows to return from the sample data
-- v_any_condition VARCHAR2(30) DEFAULT DBMS_ASSERT.ENQUOTE_LITERAL('4')||','||
-- DBMS_ASSERT.ENQUOTE_LITERAL('9')||','||
-- DBMS_ASSERT.ENQUOTE_LITERAL('d');
v_sql varchar2(2048);
-- We'll create a simple cursor of VARCHAR2(1) just like DUAL.DUMMY
rc sys_refcursor;
rc_record dual%ROWTYPE;
v_counter NUMBER DEFAULT 0;
BEGIN -- Build the SQL. In this example, we decompose an aggregated string
-- containing the first 16 hex numbers. The result is a simple 16-row table
-- from which we will attempt to return the three rows by binding
-- v_any_condition to ANY in the SQL below.
v_sql := '
SELECT token
FROM ( -- materialize the list
WITH t AS (SELECT ''0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f'' AS txt FROM DUAL)
-- then decompose the list into rows
SELECT REGEXP_SUBSTR (txt, ''[^,]+'', 1, LEVEL) AS token
FROM t
CONNECT BY LEVEL <= LENGTH(REGEXP_REPLACE(txt,''[^,]*''))+1
/* WHERE token = ANY(''4'',''9'',''d'') */ -- hardcoding works
WHERE token = ANY(:a) -- binding does not work; the goal is to get this to work '
OPEN rc FOR v_sql USING v_any_condition; -- when binding, we never even enter the loop
LOOP
v_counter := v_counter + 1;
FETCH rc INTO rc_record;
EXIT WHEN rc%NOTFOUND;
DBMS_OUTPUT.PUT_LINE (v_counter || ': '||rc_record.dummy);
END LOOP;
END;
Edited by: ltps on Jan 9, 2012 4:28 PM

Superb. Thank you very much.
For anyone who is interested in the solution I chose, here is the revised SQL that accepts a list as a bind variable after casting the list as a table. The "split string" code is below that. (What look like double quotes in the block below are actually consecutive single quotes.)
DECLARE
v_any_condition VARCHAR2(30) DEFAULT '4,9,d';
v_sql varchar2(2048);
rc sys_refcursor;
rc_record dual%ROWTYPE;
v_counter NUMBER DEFAULT 0;
BEGIN
v_sql := '
SELECT token
FROM (
WITH t AS (SELECT ''0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f'' AS txt FROM DUAL)
-- then decompose the list into rows
SELECT REGEXP_SUBSTR (txt, ''[^,]+'', 1, LEVEL) AS token
FROM t
CONNECT BY LEVEL <= LENGTH(REGEXP_REPLACE(txt,''[^,]*''))+1
, TABLE(CAST(XX_SPLIT_STRING(:a,'','') AS XX_SPLIT_TABLE)) cst
WHERE cst.column_value = token'
OPEN rc FOR v_sql USING v_any_condition;
LOOP
v_counter := v_counter + 1;
FETCH rc INTO rc_record;
EXIT WHEN rc%NOTFOUND;
DBMS_OUTPUT.PUT_LINE (v_counter || ': '||rc_record.dummy);
END LOOP;
END;
-- And the main SQL, just for clarity:
SELECT token
FROM (
WITH t AS (SELECT '0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f' AS txt FROM DUAL)
SELECT REGEXP_SUBSTR (txt, '[^,]+', 1, LEVEL) AS token
FROM t
CONNECT BY LEVEL <= LENGTH(REGEXP_REPLACE(txt,'[^,]*'))+1
, TABLE(CAST(XX_SPLIT_STRING('4,9,d',',') AS XX_SPLIT_TABLE)) cst
WHERE cst.column_value = token;
CREATE OR REPLACE FUNCTION XX_SPLIT_STRING (
p_string VARCHAR2
, p_delimiter VARCHAR2 DEFAULT ','
RETURN XX_SPLIT_TABLE PIPELINED
IS
l_idx PLS_INTEGER;
l_string VARCHAR2(32767) := p_string;
l_value VARCHAR2(32767);
BEGIN
LOOP
l_idx := INSTR ( l_string, p_delimiter );
IF l_idx > 0 THEN
pipe ROW ( SUBSTR ( l_string, 1, l_idx - 1 ) );
l_string := SUBSTR ( l_string, l_idx + LENGTH (p_delimiter) );
ELSE
PIPE ROW ( l_string);
EXIT;
END IF;
END LOOP;
RETURN;
END XX_SPLIT_STRING;

How to setup JNDI Name for Oracle Apps adapter?

Hello,
I am learning Oracle SOA 11g and trying to do some tutorial on Oracle Application Adapter. I know how to configure JNDI for DBadapter and I did that successfully. I followed same steps to create New JNDI for Oracle Apps Adapter.
1. I Created new data source using Path Services->Data Sources -> New Genric Data Source. Connection to database was successful and created new JNDI Name: jdbc/PKDTAPPS.
2. Then Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> New and created JNDI Name eis/Apps/PKDTAPPS.
However I did not find newly created JNDI Name in step 2 under Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> javax.resource.cci.ConnectionFactory.
Please let me know if am I following correct steps to create new Oracle Apps Adapter JNDI Name or not.
Since above approch did not work I created new JNDI for DBAdapter with same database connection details. And then latter on use that JNDI Name while creating Oracle Application Adapter in JDeveloper composite. And it allowed me to access Oracel Apps open interface. However while deploying the application it gave me following error.
<Feb 16, 2015 10:50:59 AM CST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21537> <Sending back error message: There was an error deploying the composite on AdminServer: [JCABinding]
[adapter-Apps-101-JournalImport.InsertJournal/1.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.apps.AppsTableWriteInteractionSpec: Cannot locate Java class
oracle.tip.adapter.apps.AppsTableWriteInteractionSpec..>
Since I have no past experience kindly suggest me what is right way to do this.
Thanks,
Shri

Hi shri,
Can you check the targets of oracle apps adapter that is it deployed on both cluster and admin server both.
Deployment-> OracleApps Adapter-> Targets
Regards,
Anshul

How to bind JtextFields in Swing to Table fields in the database

Can some one give the code of how to bind JtextFields in Swing to Table fields in the database
Am really new to java programming and have interest in learning

The standard JDK doesn't do this for you. If you search on Google, you may find some 3rd party packages that will do this.
You need to create your own form add execute the appropriate SQL yourself. Read the tutorial on [url http://java.sun.com/docs/books/tutorial/]JDBC Database Access to get started.

How to bind "Image Field" object on a database

Hi to all
I inserted into a dynamic PDF (Livecycle ES3 trial) an image field, but I don't understand how I can to bind a JPG into a database.
In (F5) preview... I'm able to open a image file on filesystem and visualize it on PDF form... but then? How to bind on database?
In my several tentatives I'm using a MS Access 2010 database table, where I defined a OLE object... but doesn't work.
Thank you at all.
visert

Hi,
I have not tried to do this, but this document provides some instructions.
http://partners.adobe.com/public/developer/en/livecycle/lc_designer_XML_schemas.pdfhttp://partners.adobe.com/public/developer/en/livecycle/lc_designer_XML_schemas.pdf
Hope it helps
Bruce

Anyone knows how to do JNDI lookup with OracleAQ?

Hi all;
Can anybody point me some guide/idea on how to implement JNDI lookup with OracleAQ?
(Creating connectionFacotry , parameters for "java.naming.factory.initial", java.naming.provider.url etc..)
Thanks
-Ratha
Edited by: Ratha on Sep 27, 2011 3:50 AM

import javax.naming.*;
import javax.naming.directory.*;
import java.util.Properties;
Properties env = new Properties();
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, PROVIDER_URL);
env.put(Context.SECURITY_PRINCIPAL, JNDI_USER);
env.put(Context.SECURITY_CREDENTIALS, JNDI_PWD);
InitialContext = new InitialDirContext(env);
where JNDI_USER is the userid If ACL is configured at the JNDI server
where JNDI_PWD is the password If ACL is configured at the JNDI server
Context.INITIAL_CONTEXT_FACTORY is the initial Context factory and depends on ur JNDI service provider.
PROVIDER_URL is the url of the JNDI server containing protocol/ip/port
Hope it helps
-aseem

How to bind a JTable in runtime.

Hello Guys,
Anyone know tell me how to bind a JTable adf Swing at Runtime?
In other words, I want to create the bindings when the application to be running.
Thanks in advanced.

Try the static createAttributeListBinding() methods in JUTableBinding.
Sascha

How to bind korean parameters in XSQL????

Hi,
I am binding english parameters in XSQL very well.
But when I am trying to bind japaneese or korean it is not displaying rows.
I am giving the sample code.
hello.xsql
<?xml version="1.0" encoding="euc-kr"?>
<xsql:query connection="scs" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:xsql="urn:oracle-xsql" row-element="ADDRESSES_ROW">
select * from emp where name='{@name}'
</xsql:query>
Request: http://hello.xsql?name=JOHN ::: working fine
Request: http://hello.xsql?name=koreanName :::Not working
Please help me in this regard.
How to bind name in korean in XSQL servlet..
Regards,
sudhi

Do you have nlscharset_12.jar in your classpath?
what web server are you using XSQL with?
Have you tried using real bind variables like this:
<xsql:query bind-params="name">
select * from emp where ename = ?
</xsql:query>
Does a query like:
<xsql:query bind-params="name">
select * from emp
</xsql:query>
return the korean data to the browser correctly?

How to bind Dimension data to SDK Component

Hi Guys,
I am trying to create a Cascading box component with the help of SDK development using eclipse.
I don't know how can I get the dimension data to my component.
when I am using data binding property type as "resultCellList" then I am able to bind the Measures' data to the component.
Can anybody suggest me how to bind dimension data to my SDK component?

In the menu under Help Contents, there is an SDK section with examples that spell this out for you.
There is also an easier to read and print PDF on the SAP Help site here:
http://help.sap.com/businessobject/product_guides/AAD14/en/ds14SP02_dev_guide_en.pdf
Also premade samples here:
http://help.sap.com/businessobject/product_guides/AAD14/en/DS_14SP02_SDK_SAMPLES.zip
Main DS Help Site:
SAP BusinessObjects Design Studio 1.4 SP02 – SAP Help Portal Page
SDK Community Site with other examples and Open Source links:
SCN Design Studio SDK Development Community

How to bind JNDI in WSAD

Similar Messages

Maybe you are looking for