How to block a domain?

I have been looking around the settings, because I'd like to block a few domain or I.P. addresses, I have done that in other routers, but I haven't been able to find the option here. Any help is greatly appreciated.
thx

None of Apple's base stations have that ability.

Similar Messages

How to block domain and sites by keyword

Hello,
I have installed Linksys BEFW11S4 router, and now want to block some domain and sites with specific keywordsm how how It is possible, I have check there are no access restriction option, and also how to access only admin all sites, please let me know.
Thanks in advance,
Laxmilal

You might have older firmware on router. Download latest firmware from www.linksys.com/download and update it. You will get access restrictions tab.

How to block domains not for all mailboxes in our organization?

Hello everybody! Need some advice - I have a script to block some domains ("black domains list") - I am using this command: Set-SenderFilterConfig -BlockedDomains:$list But now I need to block these domains not for all mailboxes in our organization,
for example: somebody is sending a message from "black" domain company.com and there is a mailbox [email protected] - so only this user should receive message from "black" domain. Any others should receive nothing even their addresses
are in copy. Is it possible? Thanks.

Hi,
When we use Set-SenderFilterConfig –BlockedDomains to block domain, exchange will block any messages from that domain without any exception.
The only thing I can think of is transport rule, so please try to create this transport rule to have a test:
If this transport rule doesn't work, then there is no way to block domain not for all mailboxes in organization based on my knowledge.
Best Regards.

How to access a domain server which is targeted by Group Policy set to block Inbound and Outbound connections

Hi,
I have a practice lab with two physical servers 2012 R2, one of them is Hyper-V host and one of VMs is a domain controller. I was doeing some exercises with firewall rule deployment through Group Policy, so I created an outbound rule to block port 80 which
was targeted to Domain Computers. Now my other physical server has inbound and outbound connections set to block and domain controller cannot be contacted to update policy ( with rule removed ). At least that is my understanding. Maybe I messed up something
with the profiles too, because port 80 would not have block all outband traffic, or?
I am new to IT so my understanding is still poor.
Best
Robert

Hi Robert,
If we block inbound connections, all connections that do not have firewall rules that explicitly allow the connection will be blocked.
If we block outbound connections, all connections that do not have firewall rules that explicitly allow the connection will be blocked.
If we block outbound TCP port 80, it will mean all websites will be unreachable, for TCP port 80 is for HTTP.
Regarding Windows firewall security settings, the following article can be referred to for more information.
Windows Firewall with Advanced Security Properties Page
http://technet.microsoft.com/en-us/library/cc753002.aspx
Best regards,
Frank Shen

How to Block mails for HR only

Dear   expert/guru
    Please let me know how to block mails for HR only.
   We don't want to block mails for all.....

Juan Reyes wrote:
There is no way to block mails based on a "Module", as Olivier said you can only filter mails per domain under the node config in SCOT.
>
> I don't understand why would anyone see a benefit by stopping people on an specific are from receiving mail. In anycase you can stop the SAPCONNECT job and filter the mails to be sent manually from SOST but thats a lot of work!.
>
> Regards
> Juan
>
> PS: Also you can simply stop the jobs creating the "HR mails" in the first place.... huh?
hi,
Issue is given below:
My SAP HR Team has some leave issues.
Due to which they need to stop the triggering of mails for few mins in Production system

How to block spamers

Please repspond with posts only (email address is not monitored).
There are 4 questions
1. What is the URL for the official, definative guide for Email Settings Blocking - blocked senders list
2. Is there a way to block sub-domains?
Example: I block jetsetter.com but spammers use random_name@RANDOM_SUBD.justsetter.com
3. How can I upload a list of know spaming domins?
I have over 2,000
4. Where can I report specific spamming domains?
[email protected] appears unmonitored
[email protected] appears unmonitored
[email protected] appears unmonitored
More generally, I'm join a community committed to blocking (or materailly reducing spam).
Regards
S

Anonim wrote:
Correction to question 2
Please repspond with posts only (email address is not monitored).
There are 4 questions
1. What is the URL for the official, definative guide for Email Settings Blocking - blocked senders list
2. Is there a way to block sub-domains?
Example: I block jetsetter.com but spammers use random_name@RANDOM_SUBD.jetsetter.com
3. How can I upload a list of know spaming domins?
I have over 2,000
4. Where can I report specific spamming domains?
[email protected] appears unmonitored
[email protected] appears unmonitored
[email protected] appears unmonitored
More generally, I'm join a community committed to blocking (or materailly reducing spam).
Regards
S
You are talking to peers here so follow is just my understanding of things.
All the settings are off the Webmail site one of which addresses is http://webmail.verizon.net
The specific page that comes up for me TODAY is
https://mail.verizon.com/webmail/driver?nimlet=showmessages&view=emails#options_Email_Options
2. You can write a FILTER rule to try and match a subdomain
3. Probably no way to upload that many. The filter rules are limited to about 50
4. The spamdetctor.notcaught is the correct address to report spam. Its is monitored, but they are not usually adding rules on reports by domains. Its a third party Verizon uses and its looking for some way to detect spam mostly by other means. Do not send spam to spamdetector.update as its for the exact other purpose, i.e reporting email that is not spam but was caught by the spamdector by mistake.

Why do you block my domain & Blogg? There is nothing there that is dangerous for anyone. Besides, you are the only internett browser that is blocking it.

I wonder why you block my domain and my homepage/blogg. This site don't contain anything dangerous at all. It is only about me, my family and friends. You are THE ONLY BROWSER that block it. And I wonder why you do it.
All the best
Rose Jenny Wahlberg
www.bluerose.no
Cellphone: **** *** ** ***
mail: ****@********.**

It is not the Firefox browser nor Mozilla that is doing the blocking but rather Google safe browsing.
http://www.google.com/safebrowsing/diagnostic?site=http://www.bluerose.no/
What is the current listing status for bluerose.no?
Site is listed as suspicious - visiting this web site may harm your computer.
Part of this site was listed for suspicious activity 6 time(s) over the past 90 days.
What happened when Google visited this site?
Of the 2 pages we tested on the site over the past 90 days, 2 page(s) resulted in malicious software being downloaded and installed without user consent. The last time Google visited this site was on 2011-08-26, and the last time suspicious content was found on this site was on 2011-08-26.
Malicious software is hosted on 1 domain(s), including imgddd.net/.
This site was hosted on 1 network(s) including AS34989 (SERVETHEWORLD).
Has this site acted as an intermediary resulting in further distribution of malware?
Over the past 90 days, bluerose.no did not appear to function as an intermediary for the infection of any sites.
Has this site hosted malware?
No, this site has not hosted malicious software over the past 90 days.
How did this happen?
In some cases, third parties can add malicious code to legitimate sites, which would cause us to show the warning message.
Once you get the issue fixed you can then have Google check and remove. http://www.google.com/safebrowsing/report_error/

How to block the undeliverable message internally?

How to block undeliverable message internally in case the internal sender sent email to one oversize internal recipient?
Thanks a lot

Exchange 2010/Outlook 2010
Sorry for posting in such an old thread, but I have a similar issue:
We have a mailing list account that receives thousands of Undeliverable messages every day.
Could I use ECS to tell Exchange to Reject Messages From "MicrosoftExchange[long string]@domain.com?
What would happen to the Undeliverable messages? Are there any problems with this?
Thank you!
-R
Edit: that solution did not block the DSNs.
I also tried creating a transport rule to delete all e-mail going to that account, but that only worked for personal e-mails, not DSNs.
One solution I was able to come up with was to set a mail rule that sends everything to a subfolder. This will prevent the mailbox from hitting the "100,000 items in critical path folders" best practice.
The second solution I am testing is to create a Mailbox Retention Policy to permanently delete all items older than 7 days.

How to Block send e-mail by telnet using Exchange 2010

Hi
I have Exchange 2010 SP3 server (Edge and Database servers).
When i logon to exchange server: telnet mail.domain.com 25using commands:
mail from:[email protected]
rcpt to:[email protected]
I can send e-mails without password.
How to block it? What is wrong with this server settings?
Kind Regards Tomasz

you can change the receive connector that is listening on port 25 to require authentication removing the anonymous the problem will be every server that sends you email will need to have a password on your server so you will not receive email
form anyone unless they have the password configured if you only want to receive email on this server from another trusted server than this is how you do it, otherwise you need to leave anonymous access enabled. Spam appliances sometimes will be the only server
allowed to send to your exchange server, but the spam appliance will have anonymous access allowed on port 25 so it can get the email. Typically the distribution of port 25 traffic is handled at the firewall and it's either sending port 25 traffic to
your email server or a spam appliance.

How to block on account payment for certain user

Dear All,
   We are looking to implement a policy on how to block certain users not to be able to take on account payment. One more query is it possible to disable a field. I want to disable the field "Payment on account" in the Incoming Payments. Please advice

Hi,
Sue below code in transaction notification procedure,Change userid =1 to user id for user ou want to block payment on account
IF @Object_type = N'24' and @transaction_type = N'A'
BEGIN
if exists (SELECT    ORCT.DocEntry from ORCT
                     WHERE (ORCT.PayNoDoc='Y' and ORCT.UserSign=1) and ORCT.DocEntry = @list_of_cols_val_tab_del
begin
        select @error =14
   select @error_message = 'Cannot make on account payments '
end
END
Thanks,
Neetu

How to block the " you are lucky visitor" popup each time I open the Firefox. I can not find any information in the add on lists et al. Thanks!

Recently, my Firefox browser v25.0 is experiencing a popup problem. A popup message saying "... you are today's luck visotor, please click Ok to ontinue". I have to click Ok then I can continue to use the browser. Is this a popular problem? Please advise how to block this popup. Thanks!

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

How To Block a User From Changing Total Field In AR Invoice

Hi all,
I would like to find out how to block a user from being able to change the total field at the bottom right hand side of the AR Invoice. Currently if a user creates an invoice and is still busy in that invoice they can adjust the total field which in turn will update the discount field as well.
Is this simply an authorization issue or am I going to have to do it in the transaction notification?
We are using SAP Business One PL 30 currently.

Hi
Please review by note again -This is by system design .
I don't know why you are so worried abt this because by setting up discount max ,if user cannot post the document ,that means it is not in the system ,no matter they change multiple times in the fields .
But I think your scenario is different ,
You are copying with certain discount from Delivery to AR invoice and i think you don't want user to change the discount field , then you can solve your issue by using approval or sp_notification
If you really want it to be greyed out ,I think you might have to go through by SDK or Boyum addon.
Thank you
Bishal

How to block an order if the price is too low?

Hello,
My problem is :
How to block an order if the price is too low?
I created a new type of condition ZMIN and an access by material.
When the net price is below the minimum price the system must position the order on incomplete document for error of price.
Thank you in advance.
Frédéric Blaise
e-Kenz S.A.

Hello,
you can enter a lower limit in the condition record:
Lower limit of the condition rate/amount
Indicates whether, during document processing, the system checks if manual changes fall short of the lower limit allowed for the corresponding condition record.
Use
When you maintain the scales in a condition record, the system checks whether the scale value falls below the lower limit.
Or you can use the flag 'conditon update'.
Condition update
Controls whether limit values are relevant for pricing.
E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
This total value can be specified in the condition record.
I hope that the information are helpful.
With best regards
Claudia Neudeck

How to block the creation of a Sales Orders without a linked Purchase Order

Hi. I'm trying to block the creation of a Sales Order that doesn't have a linked Purchase Order. The first thing I did is using the SBO Transaction Notification as follows:
IF @transaction_type = 'A' AND @object_type='17'
BEGIN
     IF (SELECT PoPrss FROM ORDR WHERE DocEntry = @list_of_cols_val_tab_del) = 'N'
     BEGIN
          SET @error = 1
          SET @error_message = 'Purchase Order Missing...'
     END
END
This works good. I create the Sales Order, I tick the purchase order field on the logistics tab, I click Add, and then the purchase order window appears...
Then, the problem begins... If I click the Cancel button, the purchase order is obviously not created, but the Sales Order is created.
Can someone tell me how to block the creation of the sales order If the user press the cancel button on the purchase order window (and the purchase order is not created)
As far as I can see, after clicking the add button in the sales order document, the Sales Order is created on the DB. If there's no way of blocking the creation of the Sales Order, can I avoid closing the purchase order window by the SBO_TransactionNotification? (if the purchase order has not been created)
Thanks...

Hi Yail,
I think you can't close the purchase order with the stored procedure.
Try to catch the Event when the user click on Cancel button.
So you can list the vents with event logger : https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ede3be37-0e01-0010-1883-cd1b5293473e
You can block the cancel button and force the user to create the purchase order.
Hope i help you
Best regards
Michael

How to Block user from Sending IM or Hide Presence of there user who is not in his department

Hi All,
How to Block user from Sending IM or Hide Presence of there user who is not in his department.
Thank you

Hi Jp,
Method 1:
You can use the Enhanced Privacy Mode in Lync 2013
<section class="ocpSection">
Enable Privacy Mode
By default, everyone except Blocked Contacts can see your presence status. To modify the privacy settings, you can do the following:
In the Lync main window, click the Options button.
In the Lync - Options dialog box, click Status, and then do one of the following:
Click I want everyone to be able to see my presence regardless of system settings (override default settings).
Click I want the system administrator to decide - currently everyone can see my presence but this could change in the future.
</section>
About Enhanced Privacy Mode
If your organization has enabled Enhanced Privacy Mode in Lync, you can choose whether to limit visibility of your presence information to only those people you’ve added to your Contacts list. You do that by selecting one of the following on the
Options->Status window:
I want everyone to be able to see my presence
I only want people in my Contacts list to see my presence
Method 2:
Using Privacy Relationship, you can block a particular user by adding him to blocked contacts
Anil Kumar (MCITP)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to block a domain?

Similar Messages

Maybe you are looking for