How to block a payment in F110, when the system does not allow us to block

Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SL

Dear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi

Similar Messages

How to access my hard drive when the system does not work

how to access my hard drive when the system does not work

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)

How is one supposed to Fix Firefox when the computer does not open the new edition of Firefox that you just downloaded? Am I the ONLY one to ever have had thi

I run win7 64x pro. This is a restatment of problem I posted yesterday I have a hard time believing I'm the first to ever have this problem which is as follows: I used CC Cleaner because of FunMoods, which is the onlt thing I have found that removes that virus thoroughly
Having done that-Face book and a few other sites came up as hyperlinks only with no illustrations, So- I deleted Firefox completely and downloaded a new copy. It downloads but won't open. I used an old copy-13.0 & same thing-does not open.
I have used Firefox for Win since it came out.. My rule of logic with computers is that when I have some problem I cannot solve myself- I CANNOT be the first person to have had that problem yet I see no answers. I would appreciate some help. Thank you.

I am the same one who posted that question though the problem is exactly as described.. I watch the progress bar unpack the download and then it gives me the choice-run with previous settings or as administrator using a password.
Either way-I do not get a new browser. I do get a screen saying that my previous settings may be partially lost. I think a month ago I had also used CC cleaner. At that time-right clicking worked. Now it does not matter. Clicking on the Mozilla download gives me the progress bar but NO unpacked browser.

HT1379 Summary: how to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards.

How to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards?
Insert the SD card.
System opens iPhoto with SD contents.
Want to transfer files from SD card to system drive. iPhoto closes
SD card directory removed from the Finder window and is not available again.
I don't want to have to reboot the system every time I want to perform this option.
What's wrong here.
The support columns show this isn't an isolated incident with all sorts of solutions possible.
This is a simple task - there should be a simple method for the system to recognize SD cards.
What's the answer?
I've reviewed a recommendation to reset the SMC.
https://discussions.apple.com/message/18500187#18500187
and
http://support.apple.com/kb/HT3964
and another thread that says, basically, you must buy extra hardware to perform this simple task,
https://discussions.apple.com/message/16911326#16911326
another one that has the same problem with OS Mountian Lion,
https://discussions.apple.com/message/21919740#21919740
another one with the problem that says SD cards can't be read by Apple unless the card is formatted specifically for Apple, ie. that Apple is not compatible with other cards, but the problem maybe something else that requires Apple service - (bad SD card reader?).
https://discussions.apple.com/message/18711818#18711818
there are probably more discussions, but I dont' want to spend my entire sunny in Seattle day working this.
thanks for the help!

Bucky Fullmeister wrote:
When I plug in an SD card, the finder window shows it under the DEVICES section. At this point, I can drag the contents to the hard drive. However, when I screw up and click the character on the right side of the name - it apparently closes the SD card and I can't find any command to reload or re-recognize the card. I have to remove and reinsert the card and then sometimes it recognizes the card. Other times I reboot and it will recognize it.
What does that character on the right side of the SD card name do? Is it an eject function - with no way to subsequently reread the drive?
It ejects or unmounts the card. When the SD card mounts click on it once to highlight it and then drag the files shown within it to the new folder.
Pete

How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

Another option if you have access to a second Mac with a drive is to connect the two together with the iMac in Target Disk Mode, Transferring files between two computers using FireWire, and installing from the Mac with the optical drive.
OT

My account is in usa but I want to enter an international credit card, but the form does not allow me. How do I have to proceed

My account is in usa but I want to enter an international credit card, but the form does not allow me. How do I have to proceed

chi45,
You must have your iTunes and App Stores set to the same country that your billing information is based in (i.e.: must use a US credit card in US iTunes and App Stores).
If you move to another country, you need to change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account. Otherwise, your credit card might not work as payment. For example, only German credit cards can be used to buy content from the German iTunes and App stores.
Can't change the country of your iTunes Store, App Store, iBooks Store, or Mac App Store account
https://support.apple.com/en-us/HT204447
Cheers,
Allen

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

Start with reinstalling Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

System does not allow to void the payment on same day

Dear All,
System does not allow to void the payment on same day in R12. e.g. If payment is made on 18-NOV-2010, system does not allow to void on 18th. We can void payments if void date is greater than payment date.
Please let me know if you have any information to void payments on same day.
Thanks in Adavnce.
Thanks,
Astik

Hello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael

TS3899 When I send an email I get an error message that the receiver does not allow "relaying" it doesn't matter who the recipient si

When I send/forward an email I get an error message that the recipient does not allow "relaying". It doesn't matter who the recipient is.

Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server>SMTP>Primary Server then turn Server ON and fill in both User Name & Password>under Outgoing Mail Server.

HT201303 I tried to update my security questions this morning but got timed out. Ive just tried to get into my account but the system does not recognise the answers to my question. How can I rectify this problem please

I was trying to update my Security Questions this morning but got 'Timed Out' I've just tried again to get into my security settings but the system does not recognise the information I'm putting in. Can anyone tell me how I can correct this problem. I can still log-in.
Best wishes

Welcome to the Apple Community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

The new maverick system does not allow me to watch Sky - Any ideas when this is going to be resolved?

The new maverick system does not allow me to watch Sky - Any ideas when this is going to be resolved?

Press the escape (esc) key to exit full-screen mode.

Re: Why can't I have a raincheck when the ad does not say limited quantities?

Not the same person, but is it possible to get a rain check for this deal whether it is online or in store? The games I wanted to buy are out in both options.

Hello everyone,
This promotion created some serious demand for the games involved. However, it also created some confusion around the topic of rainchecks. I apologize if this confusion made for a poor experience for any of you while trying to take advantage of this offer. In this post, I hope to shed some light on this for all of you.
I understand that since we did not specifically call out in our weekly ad insert whether or not this promotion qualified for rainchecks, it was somewhat ambiguous to anyone that hasn’t dealt with this specific situation before. One of the exclusions to a raincheck is when the model is not specifically advertised with a price (e.g., “All TVs on Sale”). In this case, it was advertised, “Buy One Get One Free on these 3DS titles”. I am very sorry to hear that this might not have been explained to you by the store.
We are grateful for you interest in this promotion and your desire to bring us your business. Please let us know if you have other questions or concerns.
Best regards,
JD|Social Media Specialist | Best Buy® Corporate
Private Message

Conflicts in DOE when the object does not exist in CDS.

Hi all.
SCENARIO:
I have implemented a SWCV with only a DO ( backend triggered). It has a Node structure with only one child structure.
My DO has three function:
- GETLIST: return a table with objects from R3 identified by WCRN.
- GETDETAIL: For each register from getlist, return a list of child registers with state : IMP or SEÑ.
                    This state in R3 may be IMP, SEÑ o NORM (but in devices, only I want them in state IMP o SEÑ)
- MODIFY: modify the state for a child register.
EXAMPLE:
For example, I create a parent object in R3 with 3 children registers with state IMP. This parent register with his three children registers are upload to CDS. When I syncronize, I obtain them in my device.
PROBLEM:
The problem starts when I modify the state to NORM of any child register in R3. Then, in DOE, this child register is deleted in CDS becouse as I have said before, the function GETDETAIL only returns registers in state IMPS o SEÑ. Automatically the queue
of my device is update too. Before syncronize my device, I change the state to SEÑ of the tree children registers in PDA. Then when I syncronize, the process tries to update then in CDS but one of this child register does not exist in DOE so I obtain the error text below in DOE:
Mesage: "Cannot update/delete object that does not exist in the CDS; node 'ZMOB_DESC_ETIQUETA' "
Service Name: KEYMAP_SERVICE_BV And in my Device, the child which generated the conflict does not exist (this is oK) but I continue having the others two children registers with the same state that I modified before syncronizing (SEÑ) while in R3 those two states are IMP.
I have tested to modify the 3 posibilities of conflict detection scheme of the DO but the problem continues.
I would like to know if there is any posibility or configuration to obtain the next scenario: when this conflict will occurs, GETDETAIL will run and depending on which source will have preference:
1- DEVICE PREFERENCE - the state from children registers in R3 will be updated to SEÑ.
2 - R3 PREFERENCE - the state from my children registers in the device will be the same as in R3 (IMP).
but never never never never will happens like now ( differente state in R3 and PDA after syncronizing)
Best regards
Edited by: Maria Elena Fernandez on Feb 10, 2010 12:52 PM

Hi again Oliver.
Are you sure that ROW-LEVEL Conflict handling should detect the row with conflict and download the others two child register trought GETDAIL?
I've just checked it again but it continues without working. After the conflict, none child is downloaded to my device.
According to your two opcions:
1- Imposible to avoid that. It's a customer's requirement that they can modify states by R3 and Devices.
2- Imposible too becouse we've already implemented the swcv in a production scenario. The application is already running and to change the model suppose a long time.
I explain you the scenario again with an graphical example:
INIITIAL STATE: ( Device)
parent structure : ID1(key), date,
child structure:        ID1, 1, IMP (status)
                                        ID1, 2, IMP (status)
                                        ID1, 3, IMP (status)
INITIAL STATE ( R3).
ID1(key), date, ....
- ID1, 1, IMP(status)
- ID1, 2, IMP(status)
- ID1, 3, IMP (status)
After this, I modified in R3->   ID1, 1, IMP to ID1, 1, NOR
Then, GETDETAIL starts and deletes that register in DOE.
Now I change the 3 children register in Device
ID1, 1, IMP     --> ID1, 1, SEÑ
ID1, 2, IMP     --> ID1, 2, SEÑ
ID1, 3, IMP     -->   ID1, 3, SEÑ
After I syncronice, FINAL STATE ( Device)
parent structure : ID1(key), date, ....
     child strucuture:
- ID1, 2, SEÑ (status)
                                 - ID1, 3, SEÑ (status)
FINAL STATE ( R3)
   ID1(key), date, ....
        - ID1, 1, NORM(status)
        - ID1, 2, IMP(status)
        - ID1, 3, IMP (status)
And that is the problem, different states between R3 and device.   I should need that the state in device for the others two children will be also IMP if R3 has preference or the two children will be SEÑ in R3 if the device has preference. But Now neither children in R3 nor children in Device are updated . Only the first which generate the conflict is deleted from device ( normal because it was still in the queue from the device before syncronice.
Best regards.
Edited by: Maria Elena Fernandez on Feb 11, 2010 8:32 AM
Edited by: Maria Elena Fernandez on Feb 11, 2010 8:43 AM

HT4623 how do you update software when the phone does not have the software update option in settings

how do i update the software on an iphone 3gs when the software update option is not in the settings on the phone?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

How do I use location based Reminders when my address does not show up in Apple Maps?

I currently live overseas and Apple maps does not have any street names listed in my neighborhood. I have tried dropping a pin on my house and adding it to contacts, but it just takes me back to the center of town which is about 5 miles from my house and closer to my office so that the location reminders gets confused.
Is it possible to enter gps locations directly into the reminders program or into my contacts? Any suggestions are welcome!

@Kilgore-Trout, there is no "contact us" at the bottom of the Apple Map. All I get is report the problem...move the pin, which I have done numerous times. Google maps gets it right & due to that fact, we have to tell vendors to NEVER use Apple Maps when getting directions for deliveries. I love apple, own all their products and now my BMW i3 is using their maps & I would love to have them be responsive.

How to block a payment in F110, when the system does not allow us to block

Similar Messages

Maybe you are looking for