How to block changes in system generated Plan orders

Hi,
As after MRP RUN we get Planned order generated by the system, with type LP , I have a requirement that system generated plan order quanity cannot be cnhage by the user if plan order is generated for quanity 85 user should not make it 100 no quality chnages, also the manual plan order type LP cannot be create manully it should be creat by system only, and for manul other type of plan order type should be use,
How to do this.
regards,
zafar

Hi
Firming can be used when you don't want certain planned orders to change during subsequent MRP runs.
Say today you have created certain palnned orders.
In a normal scenario, when you do the MRP run again, the planned order may get changed if the requirements have changed.
However as a normal business practice, it is not desired to change the production plans everytime there is a change in the requirement...especially in the immediate future (maybe a week or so).
We set this as the planning time fence depending on the MRP type settimg in the material master, you may have firm orders.
MRP will also generate firm planned orders for materials with MRP type P1 to P4.
In addition to the above, any planned order that is manually changed is also firmed.
Hope this may help
Regards
BRSR

Similar Messages

How to block changes in pr after po creation

We have set up the system messages (06 76 as error). However still it is possible that the user can change the description or add new line item after after the release/po creation. How to prevent this. how to block changes in pr after po creation
do i have to create new system messages if yes then hoe kindly suggest
Thanks.
regards

Dear Goel,
When setting the message 06076 and 06400 as described in the note 385002
to error it is no more possible to create a second purchase order with
reference to the purchase requisition.
See SAP note
315448     ME21N: Referencing a purchase requisition
Regards
V V

How to block changes of PR after convert into PO

how to block change/deletion of purchase requisition after convert into purchase order without changing/deleting PO.

Hi
Goto customizatin of rellease procedure of p.req, in that select setup procedure with classification and select release indicator,and select details in that changeability indicator is there in that you will select based on your requirement
changeble,new release in case of release strategy
1-cannot be changed
2-changeble,no new determination of strategy
3-changeble,new release in case of release strategy
4-changeble,new release in case of release strategy or value change
select in the list and save and check your scenario.
Thanks

How do i change the systems language of my mac. I had to change it into Chinese but now the Chinese guy is gone and I've no idea how to change it back to english because I don't understand any of the chinese writing

how do i change the system language of my mac. I had to change it into Chinese. Since the Chinese guy is gone, I've no idea how to change it back into english. I don't understand any of the Chinese writing..

You may find info from this article helpful.
http://support.apple.com/kb/PH14211
Best.

How can I changed the system username and password

How can I changed the system username and password
Need help urgent

Paolo,
If I understand his requirement good (to have system user but must be called xxxx) then that's the option.
Well, that's obvious...Sure, but sometimes we see complicated thing but not something what is obvious...
Also your demonstration to OP how to change user password indicate that OP-level of knowing Oracle user management is such that OP maybe need help for something what is for you or me obvious...
Cheers!
Message was edited by:
Faust

Where/ how do I set SNP to create Planned orders with multiple line items?

Hi
Currently our SNP is generating planned orders on a daily basis, it creates a single order with a single line item per location.
Where/ how do set SNP to create planned orders on a daily basis to generate a single order with multiple line items per location, so therefore one planned order with multiple line items for a single location.
Thanx
Keegan

Hi Keegan,
In SNP (APO) it is not possible to create order with multiple line items.
But you can do some settings so that while planning system can do aggregation and disaggregation.
But your requirment should be set on Aggregation/Dis-aggregation logic.
Please follow the follwing links:
http://help.sap.com/saphelp_scm2007/helpdata/en/2c/c557e9e330cc46b8e440fb3999ca51/content.htm
Aggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/42/f731d078e73ee4e10000000a1553f6/content.htm
Disaggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/a6/ebefaf32e22e468355da304cc59387/content.htm
Please be sure that the setting of this logic will be at planning area level.
You can't change aggregation/disaggregation logic further.
Regards,
Santosh

Quota arrangement in R/3 for APO generated planned order materials?

Quota arrangement for the planned order materials generated from APO and when
it is at the inbound side of R/3 while in CIF i.e.
u2022 Once the Planned order is created in APO and when it is at the inbound side of R/3 while in CIF u2013 the system will first check in the table(EQUK) against the material and plant whether there is any valid u201CQuota arrangement numberu201D(EQUK-QUNUM) .
u2022 Then from the table (EQUIP) against the u201CQuota arrangement numberu201D the system needs to calculate the percentage quota(from QUOTE field) of the material concerned against each production version.
u2022 Finally the Planned order of the material needs to be converted into more than one Planned orders as per the production versions and in the ratio as mentioned in the quota arrangement.
Actually Functionality exists today in R/3 whereby MRP will generate more than 1 planned order if production version quota arrangements exist. For example if via MEQ1 a quota arrangement exists to split requirements 60-40 between production version 1 and production version 2 then MRP will generate 2 planned orders using the 60-40 split.
Does this still occur if APO generates the order materials and CIFs it to R/3?
*I mean I had a requirement where APO generated planned orders to be split automatically and the correct PVs(Production version EQUP-VERID) to be assigned if quotas(EQUP-QUOTE) exist in R/3 side??*
please help me asap this will b really appreciated and high points will be given....

Quota arrangement for the planned order materials generated from APO and when
it is at the inbound side of R/3 while in CIF i.e.
u2022 Once the Planned order is created in APO and when it is at the inbound side of R/3 while in CIF u2013 the system will first check in the table(EQUK) against the material and plant whether there is any valid u201CQuota arrangement numberu201D(EQUK-QUNUM) .
u2022 Then from the table (EQUIP) against the u201CQuota arrangement numberu201D the system needs to calculate the percentage quota(from QUOTE field) of the material concerned against each production version.
u2022 Finally the Planned order of the material needs to be converted into more than one Planned orders as per the production versions and in the ratio as mentioned in the quota arrangement.
Actually Functionality exists today in R/3 whereby MRP will generate more than 1 planned order if production version quota arrangements exist. For example if via MEQ1 a quota arrangement exists to split requirements 60-40 between production version 1 and production version 2 then MRP will generate 2 planned orders using the 60-40 split.
Does this still occur if APO generates the order materials and CIFs it to R/3?
*I mean I had a requirement where APO generated planned orders to be split automatically and the correct PVs(Production version EQUP-VERID) to be assigned if quotas(EQUP-QUOTE) exist in R/3 side??*
please help me asap this will b really appreciated and high points will be given....

Pegging relation for stock got lost once we do changes to the SNP planned order.

Hello Experts,
Pegging relation for stock got lost once we do changes to the SNP planned order.
We are using a BAPI "BAPI_MOSRVAPS_CREATESNPORDER" to make changes to the planned order as per our business requirement.
However after changes the pegging relation got lost.
Please help, why and how to solve this.

Dear Krish,
While creating orders using BAPI pegging relationship will be lost.
Could you be more clear which orders you are creating?
Some times dynamic pegging is possible.
Regarding pegging relationship please check the link, it may help you.
Pegging - SAP Library

Change component quantity in planned order

Hi,
Is there any FM or BAPI for changing component quantity in planned order?
Regards,
Archna
Edited by: Archna Raja on Sep 22, 2010 12:17 PM

Hi Srinivas,
I assume, you try to change Manfacturing Order ( Like Process Order, Planned Order etc). If so, the mentioned bapis will work perfectly. However, you have to send right data to bapi BAPI_MOSRVAPS_SAVEMULTI3. Send to bapi,only what is needed, because if there is any mis-match,system will not update the order.
Few insights from my side are,
1) Check "ORDER_TYPE" Input Parameter.
- 5 Planned Order
- 6 Production Order
2) Fill Only ORDID, ORDER_NUMBER and MASTER_ORDER_QUANTITY in the structure ORDER_HEAD.
3) Also, fill the same in the structure ORDER_HEAD_X. Put 'X' only for MASTER_ORDER_QUANTITY.
Hope this will help you.
Thank you,
Santosh KB.

How to block the creation of a Sales Orders without a linked Purchase Order

Hi. I'm trying to block the creation of a Sales Order that doesn't have a linked Purchase Order. The first thing I did is using the SBO Transaction Notification as follows:
IF @transaction_type = 'A' AND @object_type='17'
BEGIN
     IF (SELECT PoPrss FROM ORDR WHERE DocEntry = @list_of_cols_val_tab_del) = 'N'
     BEGIN
          SET @error = 1
          SET @error_message = 'Purchase Order Missing...'
     END
END
This works good. I create the Sales Order, I tick the purchase order field on the logistics tab, I click Add, and then the purchase order window appears...
Then, the problem begins... If I click the Cancel button, the purchase order is obviously not created, but the Sales Order is created.
Can someone tell me how to block the creation of the sales order If the user press the cancel button on the purchase order window (and the purchase order is not created)
As far as I can see, after clicking the add button in the sales order document, the Sales Order is created on the DB. If there's no way of blocking the creation of the Sales Order, can I avoid closing the purchase order window by the SBO_TransactionNotification? (if the purchase order has not been created)
Thanks...

Hi Yail,
I think you can't close the purchase order with the stored procedure.
Try to catch the Event when the user click on Cancel button.
So you can list the vents with event logger : https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ede3be37-0e01-0010-1883-cd1b5293473e
You can block the cancel button and force the user to create the purchase order.
Hope i help you
Best regards
Michael

How do I change the value of the Order By field in an MP3 file?

good day Guys,
I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
How do I change the value of the Order By field in an MP3 file?
for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
I've been "collecting" several songs over SEVERAL years
I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
I have used the program Mp3tag to remove the music tags
I've tried to download the song again and go through Mp3tag program as if it were a new song
I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
I've tried to catch the song again, from a previous backup
I've tried to create a copy of the file at iTunes own
I've tried to create a new music file in a music recording program
NOTHING of what I did above resolved
-> I'm using Windows 7 64-bit Ultimate
-> I'm using iTunes 12.1.1.4 for 64-bit Windows
-> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
-> The iPad is updated with iOS 8.1.3 and is not unlocked
I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
Hugs and await answers,
Paulo Ricardo

hello turingtest2,
my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
I do not know what to do...
I want to learn to ride the iTunes Music Library, that my work is less
you know any site that teaches create/manage my iTunes Music Library?
this site/forum may be in English, no problem
thanks for all your help and the help of others who responded to my request

HT5071 I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?

I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?

Sorry I didn't get the tip link right: Change page number style

SNP Heuristics to generate planned orders

Hi all,
I have the demand in months for five years & once demand came in i take Heuristics to generate the Planned orders.I have a specific requirement for a specific location Heuristic that SNP Heuristic should generate planned orders only in month of January to March for all the five years.
I am using SNP PDS .The PDS do not contain resource.
Can you suggest a good solution for the above?.
thanks
Kumar
Edited by: Kumar on Jul 22, 2008 10:39 PM

Hello,
1) SNP PDS Does not contain resource?
SNP pds contains resourse in line with PPM. Please check the Resource definition. It may not be of "Mixed type" hence SNP pds is genertaed w/o resourse.
Plz modify the resource definition & generate PDS afresh.
2) Order creation for limited period?
You can control this by using Factory calender assigned to resource or putting doen time for the period for which you want to restrict order generation. Hence Orders will be generated for the period for which resource is workin
Thanks
Mangesh A. Kulkarni

How to block a article to make sales order & STO

how to block a article to make sales order & STO.
actually one new article has been created and listing has been done only for DC, but one store is able to make sales order for this article. how can i block this article to be used by other sites except DC?
thanks & regards'
manoj gupta

Dear Manoy Gupta,
Go to Transaction MM02 -> Basic data 1 -> X-plant matl status :
01 Blocked for procment/whse
02 Blocked for task list/BOM
10 Blocked for MRP etc.
Select any one.
Valid from - Here you enter valid date from which the material should be blocked.
So from this your material will be blocked for any PR/PO/any transactions related to Procurement
Hope this will help.
Regards,
Naveen.

After MD81- what will happen to already generated planned Order

Dear Experts,
I have few doubts,please check the details below.
1.After MD81 for Finished Material, what will happen to already generated planned Order.
2. For Standard finished material, can MTS material planned order be clubbed and generate one planned order.?
3.For standard Finished material, can MTO materials, planned order be clubbed and generate one planned order.

Hi,
MTO -
The materials are uniquely assigned to specific sales orders.
MTS -
The materials are not assigned to specific sales orders.
You can manufacture material and keep in stock without any customer requirement.
Basically for MTS you need to use Strategy 10 and for MTO you need to use strategy 20 in material master.
Regards,
Sankaran

How to block changes in system generated Plan orders

Similar Messages

Maybe you are looking for