How to block deletion of Inspection Plan

Dear Experts
Accicendatally, our users are deleting the Inspection Plan,
Is there any authorisation object to make Restriction on this,Transaction is QP02.
Regards
Sandeep patil

Hi Sandeep,
As you said User's are deleting inspection plans. They must be putting it for deletions by clicking on deletion flags.
If you want to restrict this then you have to get help of security team. They will find role for this transaction -
> then they will find out the objects matanined in this role -
> this will display all the activities in that object -
> then they can cancel deletion activity from object list.
Then when User will access QP02 then this checkbox will appear grey. Then they will not be able to delete inspection plan.
Hope this resolves your issue, reward points if helpful.
Regards,
Avinash.

Similar Messages

  • How to delete several inspection plan

    Hi every body,
    I need to delete 4000 inspections plan, but I don't know how I can do it?
    Somedody could help me?
    I try tcode QSR6, but this tcode delete just one inspection plan!!
    tHANK for any help.
    Cdt
    Kari

    Thanks for you tcode but do you try it?
    I don't know how to use it?
    How I can to delet inspection plan?
    Coul you help me, please?

  • How to block delete option in va01 , va02, va03

    hi,
    i like to know how to block delete option in va01 , va02, va03.  I need to block the delete option in the menu to delete the sales order by the user.
    Please reply ASAP.
    <removed_by_moderator>
    Please read the "Rules of Engagement"
    thanks in Advance,
    With best regards,
    sathies
    Edited by: Juan Reyes on Jul 29, 2008 1:05 PM

    Hi,
    Do a user trace in st01 for that transaction and find which auth object it is refering to and the auth value then maintain the values accordingly.
    Regards,
    Vamshi.

  • How to set up the inspection plan for the material in super BOM

    Hello,
    how to get the accurate inspection plan of the IQC for the material which was class item in a super BOM?
    I've gotten the characteristic value from the sales order, and get the PO after MPR. The problem is how to specify the target value and the range of inspection characteristic in inspection plan, because the value is temporary?
    Thanks!
    Lin

    Hello,
    I think you need to create MIC which linked with the configuration characteristic, and specify "inspection by configuration" for the inspection type.
    then the configuration value in the sales order can be transfered to the inspection lot when production released or goods receipts if you use inspection type 03 or 04. that means the value range for the MIC will be determined dynamically for each sales order.
    Regards, Winnie

  • How to display changes of inspection plan via t-code :CBWQM ?

    Dear all,
    We are using ECM for inspection plan updating, Is it possible to see changes in detail like QP60,QP61 via T-code : CBWQM ?
    Regards,

    QP61    Display change documents insp.plan?

  • QM_MATERIAL DELETION FROM INSPECTION PLAN

    QM Experts,
    Is there any transaction code by which we can delete the selected materials from the task list of type Q?
    For example in a task list group XYX with group counter 1, there are 1000 materials assigned. Now I want to delete say 400 out of it.
    Whether QSR6 will serve the purpose? How? what precautions need to be taken while executing QSR6?
    Anand Rao

    Hi Anand,
    Do you want to delete it w/o keeping a track of it in any table you can use this transaction.It will delete it from the table level itself.
    If you are Okay to keep a track of it in table ( Del. Id - X), you can go for a LSMW program to do so.
    Please clarify how do you want to do it ?
    Thanks,
    RAVI.

  • Inspection plan deleted

    Hi,
    My users have just "deleted" certain inspection plans. They marked the plan with the deletion flag. How can I take the deletion flag out of it.
    Please this is very urgent!!!!!!
    Charline

    hi
    if you have put the deletion flag it is possible reove it.just go to inspection plan in change mode (QP02),press the header details then remove the deletion flag indicator.
    if you have run the QCR6 without archiving then it is not possible to revoke it
    kindly refer the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/fa9066f0bc11d283d60000e829fdb3/content.htm
    regards
    thyagarajan

  • QM- delete inspection Plan

    Hi Guys,
    i have an issue regarding master data and inspection plan.
    i need to change the base unit of measure on a material.
    when i tried the system gave me this message:
    The base unit of measure cannot be changed.
    The reasons for this are:
    Routings already exist that are assigned to the material.
    Type Group    GrC Plnt
    Q    235723   1   USNA
    so i have checked table PLKO and found my material.
    i have seen that an Inspection Plan has been created, so i deleted the IP with QP02. went to MM02 tried to change the Bum but same error.
    run tcode QSR6 but i am not able to delete this I.Plan. am i missing something?
    can you please help?
    thanks
    C.

    BTW: for your process you don't need to delete the inspection plan.  All you need to do is go to the material assignment screen at the header level of the insp. plan and delete the assignment of the material to the plan.  Then, if you wanted to, after changing the BUOM in the material, you could use QP02 to change the UOM used in the inspection plan, and the reassign the material back to it.  Save you from having to recreate the plan.
    FF

  • Inspection plan deletion

    Gurus,
    Is it possible to do mass deletion of  Inspection plans.

    Hi,
    You can use CWBQM to delete multiple material number assignments at once. QSR6 delete the entire task list . Beware that the deletion of the material assignment doesn't completely delete from the tables. You will need to look at OSS note 60386.
    As you want to use the same group number in future, system will allow you but the counter number will be the next available.
    Cheers,
    Tushar

  • Specifications and Inspection Plans

    Hi,
    I have few questions regarding Specs and Inspection plans.
    1) What is the primary purpose of specifications(CG02 transaction)?
    2) What is the use of specficications in QM and EHS modules?
    3) How are specifications related to Inspection plans?
    4) What is the business advantage by enabling specification data to be copied directly into Inspection plans?
    Thanks in adavnce
    Vishnu

    The idea is that you can maintain all the specs in the EH&S module in one place.  Specs are used of course to evaluate the material and make sure the material is what it is suppose to be.
    The transferring however of the specs from the EH&S module to QM however leaves a lot to be desired.  I don't recommend it at this time.  If  you attempt to do it, plan on bringing in a consulting partner or consultants.  You'll probably wind up doing a lot of coding to make it work for you as there isn't much flexibility or functionality as it is currently delivered.  All IMHO.
    Craig

  • Inspection plan for all materials GOODS Receipt

    Hi qm experts,
    I have a scenario. How could I make an inspection plan which covers all materials with variable base unit of measure. Its because my client is using winlims for their results recording. I want to create only one inspection plan to incorporate all materials for assignment, how could I make this one. I hope anybody could answer my question.
    Regards,
    Edsel matildo
    QM Consultant

    Hi,
      Say u have different materials with different base unit of measure ( kg / ltr / ea / pc /  --- -
    etc ) And u have assigned all these material in qulity plan having only one unit of measure (say mm )for characterisrics then there is absolutely no need to maintain conversion rule for all these
    Beacuse base unit of measure is different and unit of measure is different .
    Note Conversion rule is only required if ur using alterenate base unit of measure
    Amol

  • QM Inspection Plans migration - How to migrate deleted plans.

    Hello All,
    I'm currently working on a migration project from 4.7 to 6.0.
    Our customer wants to migrate all QM inspection plans, including those are marked as deleted (PLKO-LOEKZ = 'X').
    I'm using BAPI_INSPECTIONPLAN_CREATE. The BAPI works fine when the inspection plan which is being loaded is not marked as deleted. But when I try to upload another one which is mark as deleted (BAPI1191_TSK_C-DEL_IND = 'X'), I get the following error from BAPIRETURN: "The object does not exist for scheduled deletion time" (Message class CPCC_DT, number 214).
    Does anybody knows if it is possible to load inspection plans marked as deleted using this BAPI?

    C N,
    The principal Idea is to migrate either
    - the original amounts, the installment plan and last the latest payments (you migrate payment history)
    - or to migrate the still open amount as one or more open items and subsequently an installment based on that amount.
    Kind regards,
    Fritz

  • Recall deleted Inspection plan

    Dear experts,
    User accidentally deleted inspection plan header in QP02. Please advise how to recall the deleted inspeciton plan.
    Thank you very much.
    Regards,
    Wong

    Hi,
    You can implement note 332626, this will restore the Q plan header for you.
    Regards,
    Roderick

  • How can I delete my old iCloud account cause I forgot my password and my email has been block. Please I need help urgently

    How can I delete my old iCloud account cause I forgot my password and my email has been block. Please I need help urgently

    Contact the Apple account security team for assistance resetting your password: Apple ID: Contacting Apple for help with Apple ID account security.

  • How can I delete only shared instance of a member from Hyperion Planning

    Hello,
    Can anyone tell me how I can instruct the Hyperion Planning IKM to delete a only specific instance of a shared member from Hyperion Planning? I've tried specifying the shared member, the parent of the shared instance, 'Shared' as the data storage type, and 'Delete level 0' as the operation. Instead of deleting just the shared instance under the specified parent, however, the IKM deleted the base member, which in turn deleted all shared instances of the member and all the data for the member (lucky thing I'm working in a development environment!). At one point I thought I had things working as I wanted, but now I think I must have mistaken.
    Does anyone know definitively whether only a specific instance of a shared member can be deleted from Planning and, if so, exactly how to do it?
    Thanks very much.

    Well, with a careful review of my ODI interfaces and some additional testing I found my problem. My interface for one dimension was defined exactly as it should be and it worked as expected, whereas I found I had failed to activate the mapping for the data storage property in my interface for another dimension (DOH!). Naturally, the latter interface deleted the base member because the default data storage property value is 'Store'.
    Thanks for testing and confirming that deleting only a specific shared instance of a member from Hyperion Planning does work, John.
    (P.S. to John: I can't see how to change my "Helpful" tag on your first reply to "Correct", so if you want to post another reply, I'll mark it "Correct" (for more points!). Or, if you can tell me how to modify the "Helpful" tag to "Correct" I'll do that instead.)
    Edited by: Mark on May 25, 2012 3:33 PM

Maybe you are looking for

  • How can i move a single keynote cell to desktop?

    Hello - Am using my keynote presentation as a basis for an imovie11 clip and want to modify a few cells in keynote. Have found it much easier to just drag the individual cells to desktop then import them into imovie11. However forgot how to drag them

  • Why was my review removed?

    I'm at a complete loss to know why my review of Empty Button Cache was removed. I can't ask the editor who removed it as apparently I can't reply to the email so informing me. I can't reproduce the review here because I saw no reason to keep a copy.

  • How can i see flash videos with my iPad 2

    Hi , i need to know if apple fixed the problem with the flash videos

  • How do I align stroke brushes on path starting at the end of a path?

    Hello, I made a path with no fill and a stroke. I copied this path in place and made a "brush-arrowhead" as you can see in the image below.  This allows me to get a look that arrays my arrowhead across the entire path.  My issue is that where I start

  • Buying TV Shows in iTunes

    Is there a way to buy a single SD episode on iTunes? On my computer, I can only buy a whole HD season, a whole SD season, and a single HD episode. Thanks!