How to block key figure value input in DP?

Hello everyone!!
I need to create a way to block the input of value in some key figures in some planning books in DP.
I tried to create a macro to block cell input - CELL_INPUT(XXX) = 0 - , but unfortunately it doens´t work, because I have another macro (default) that keeps one cell of the entire row opened to the user insert the values.
I can not put the "closing" macro as an interactive macro in the planning book, because, only one user is able to execute the macros, not all of them. And I also can not take off the other macro from the default event or change in the design mode of the planning book.
Does anybody know´s another way to do it?
Thanks a lot!!
Regards
Angela

Hello Visu
It´s not possible to create another planning book. They will have to use the same. But I have another solution. I´ll create this macro to block the values input in the determined row to be executed only for one user. This user will be the administrator, and only he would be able to execute this macro to block the other users.
But I have one doubt, how can I set the macro to be execute only by this user using the USER( ) function? The way I did it´s locking only this user, and it has to block all the others. The function user will be used only for the administrator.
The macro is like this:
IF
    USER ( 'AAA') = 1
    Line XXX (Attributes) =
        ROW_INPUT( 0 )
ENDIF
Best Regards
Angela
Edited by: Angela Christina Martelli on Mar 26, 2009 4:49 PM

Similar Messages

How to create a variable for key figure (value will be entered by the user

I want to create one query, where the user has to entered a max value when the query is started, so that only the query rows will be listed, where the key figure value (integer) of the row is smaller than the max value given.
How can i define that variable which has to start at the begin of the query; and also the restricted key figure iin consideration of the KF variable.
Thanks for helping
Ar.

Hi Arnaud,
Go to Conditions-> Right click -> New Condition -> Edit -> NEw -> Selct the KEy figures from the dropdown( the KFs that are used in the rows/columns) -> Select Less than from the operator drop down (less than is for you case) -> Values, there is an option to create a variable -> Select the variable -> transfer. It will appear on the top.
Save & Execute, you will find it in your selction criteria.
Regards
Sunil

Need help for report Variable to restrict the key figure value...

Hai gurus,
Now i have data in the cube as follows...
Reuisition     HR INTW date     LM INTW DATE     TEL INTW DATE     HR Count     LM Count     TEL Count
a1              01.01.2010     02.01.2010             01.04.2010                 1                1                 1
a2              02.02.2010     03.02.2010             02.02.2010                 1                1               1
a3              03.03.2010     04.03.2010             03.03.2010                 1                1               1
when i execute the report it shd ask the prompts with Date interval as in the below...
HR INTW date
LM INTW DATE
TEL INTW DATE
if i dont give any interval in the variable prompt it should display all the recors as follows
Reuisition     HR Count     LM Count     TEL Count
a1               1                  1               1
a2               1                  1                     1
a3               1                   1             1
If i give LM INTW DATE interval as    01.01.2010 to 31.02.2010
then it should display all the other counts as in the output_1 , but for LM count for a3 it should show 0.
Reuisition     HR Count     LM Count     TEL Count
a1               1                  1               1
a2               1                  1                     1
a3               1                 0                  1
that means wherever i restrict the data depending on the variable that only that interval key figure value shd be in the report..
for this scenario, which variable i need to use... and how i need to restict the KFig value in the report...
Right now i am getting like this but it is restricting the records,,, where it should not restrict the records...in the report..
Please guide me for the same...
If any concerns about the scenario please let me know...
Regards,
VJ

hi chowdary ,
could you tell me the var. creation in detail and with which reference object i need to create ...
whether i need to take LM_DATE / 0DATE while creating variable...
and i kept this variables it in filter section, based on the LM_DATE Object.
i have tried both.. y'day when i take 0DATE it giving me some results...
But at the same time it is restricting the records..
i think it could be a problem with var.. properties?
need more inputs pls.
Regards,
VJ

Code to sum up multiple record key figure values from one ODS to another OD

We've got two ODSs: ODS1 and ODS2 and ODS1 feeds data to ODS2 through update rule. In ODS1, multiple records could contain one same doc records and we would like to sum up a key figure value for these multip records with the same doc number in the update rule and populate a key figure (a sum-up value or total value) in ODS2 for this doc number. We wonder how the code would look like.
Welcome the valuable input!
Thanks

Hello Kevin,
In this case there is no need of a code. As in ODS2, contract number is a key and PO is not a part of key, you can have update type for the key figure as "Addition". Value for that particular key figure will be added for all the recordes with same contract number irrespective of PO number.
Hope it helps.
Regards,
Praveen

Key figure value in a level

Hi is it possible to identify which key figures values has introduce a user ? and which CVC has the user uses for inserting the key figure value?
REgards.
PS :We have APO DP 5.0

Javier,
It is possible to identify and track the inputs of specific users contribution to that Key figure using the following method, Provided you follow certain prerequisites first.
Its should be known before the certain people are responsible for certain data selections, like if there is a change in certain Sales org, we should ideally know who is the assinged planner to that Sales Org. or that sales org has been assinged to which Planner
Next, Develop to Lag reports in BI using the regular snapshots of the the data extracted out of DP before and after the changes have been made for that particular KF.
Compare the changes using the versions of snapshot before changes and after changes, or perhaps create another calucalted KF showing the different between two versions. The BI team should be able to create reports that enable you to run this report on all levels for that Key figure.
Hari V

Key Figure value in Cube showing with extra zeros

Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2     1     2
3     2     6
When display value from cube
Price, Quantity, Sales Rev
2,00     1,000     2,00
3,00     2,000     6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,

Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM

How to rearrange key figures for every row in a report

Hi gurus,
I need help in rearranging the key figures values( product sales for A, B, and C ) in the columns for each sales division row D1,D2,D3 displaying keyfigures in the order of descending sales volume for each division. The order of key figures has to change for each row.
Is it possible through some user exits? Your help is appreciated.
Thanks

Hi,
I am extremely sorry for my earlier post. I am not too sure about that. I heard that we can do RRI on Infoobject.
Please look for other experts inputs. I apologise for that.
Regards,
Suman

How to find key figures not created in a Structure.

After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure? Does anyone know how to find Key Figures not created in a Structure.

Thanks for such a quick response.
I am assuming the following about the table :
-     Column u201CCALDAYu201D contains a date value for each day the Index is active.
-     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
-     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
-     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
-     Column u201CBIA_TECHINAu201D ????????
-     Column u201CBIA_INAu201D ???????
-     Column u201CDB_FALLBACKu201D ???????
I am not sure if my understanding of the column is correct. Can you tell me they are? The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
Thanks

Error in key figure value at Reporting level

Hi Experts,
I had problem of Key figure value which displays wrong data in reporting.
The Process is :
I had added the key figure SALK3 to the generic data source (xxx). The Extractor is Table/View, Table is MBEW.I had replicated to BW side.
In BW, The process is Data Source(Generic) to 0MAT_PLANT(Infoobject (Added SALK3 to the infoobject of Attributes tab) ) loads to Multiprovider.I can see data in the multi provider for that particular field after loading.
Now the problem is, In Query designer i had added the key figure in Columns and ran the report.The output of the field is, If the value is 100 it displays 100 ERROR, if it 200 it displays 200 ERROR.Could you please help me on this,where i went wrong.
Regards,
Kishan.

Hello,
Please check with the follwing screen shots:
Right click on the key fgure you created----select edit
Once the screen opens select the NODIM from Data Functions before the key figure (as highlighted).
Finally click on OK.
Regards
NS

How to filter Key Figures - not using the GUIDs

An example How to filter Key Figures may look like this:
http://XXX.com:8000/sap/bw/BEx?sap-language=DE&bsplanguage=DE&CMD=LDOC&TEMPLATE_ID=XXX&FILTER_IOBJNM=41F68RV4ZB5VYSARODYU70CAQ&FILTER_VALUE=41F68SAI18DB01DO023IR49QA
The GUIDs consume the space in the URl. Is there a way to work with an alias.
To use the technical name of a Key Figure defined in the Query does not work.

Hi Cherie,
This is exactly the type of problem that I'm currently trying to figure out. I'm trying to following your solution but I'm not clear on how you actually achieved this in you last note. I want to dynamically select actuals/budget column fields based on what period I enter. I thought about creating 12 separate RKF fields for actuals and 12 separate RKF fields for the budget reforecast and outputting these all and then doing some VBA to hide the fields not required based on which period was selected... how is your variable ZFYAPER7 defined and calculated?
Cheers

How can i add the value inputted from the prompt box to the mysql database?

Hey guyz help me pls with this problem... im only new to javascript and also to the opensource like(php and mysql). I tried to use a prompt box and store the value into the textbox. But now I want to know how to insert/add the value inputted from a prompt box directly into the database if it is possible.

Java is not JavaScript, they've got almost nothing in common (apart from superficial syntax similarities and the first 4 letters of their names).
If indeed your question is about JavaScript, then please find a JavaScript forum, as we can't help you here.

BEx query: count unique key figure values

Hi
I need a little help with a query. I need to count the number of unique key figure values. Se example;
Data:
Employee1 - 2
Employee2 - 3
Employee3 - 2
Employee4 - 1
Employee5 - 2
Employee6 - 1
Employee7 - 2
Wanted output:
1 - 2
2 - 4
3 - 1
What kind of options do I have?
Thanks
Mike

I would create a new characterstic for the same key figure and placed in rows and count in columns.
and second approach would be , create condition with customer exit and write the logic to count the unique values.
This is just a direction to move forward with the assumption that you are good in using variables and wirting logic in ABAP.
Thanks,
Sukhi

How does restricted Key Figure Works

Hi Gurus,
I am psoting a very common question but its very important for me right now.
My understanding about RKF is that it restricte the Key figure values with Characteristic.
I have a cube where I have materil, qty and stock type. I need only those material which has stock Type 'D & E' SO I picked Qty and restricted that with stock type.
In the report it shows me only those materials which has stock type D & E.
Now someone is telling me that it should show those material also which has other stock types but with '0' values.
Is that true?
Regards

try with
material -
place it in row
stock type D, E , or something else ---place it in row
qty with stock type D and E...place it in colum restricted by stock type D and E
Make the setting do not supress 0 in query properties.

How to sort key figures

Hi Gurus,
Thanks in Advance...........
How to sort key figures & Way to find out customers with 0 sales.
Thanks,
Venkat.

Hi Rakesh,
Thanks for your info, i assigned point to you.
any idea on Way to find out customers with 0 sales....
Thanks,
Venkat.

How to get the key Figure values.!.......?

Hi friends...
      I have a scenerio , where I have loaded the data from 3 different data sources say A , B and C in to 2 different DSO s and in to 2 different Info Cubes. And I have built Multi Provider from this 2 Info cubes.
In the data source B , I have BELNR (Parked document number ).WRBTR (for Amount). In the report I have to show a field called Nr of Documents Parked and Value of Documents Parked. Same thing for Data Source C, for Blocked Documents. Now My question is there is no Key Figure in My Data Model to Count the Nr of Parked / Blocked Docs....So in the Reporting how can I show this ? Do I need to use Customer Exits ? Do I need to have CKF /RKF ? if so , from what Key figures ? or Can I get the Count from the Backend (Modelling itself by using a Keyfigure with any Code)?...not only this 2 , I have lot many custom things to do in my Model...If any one can get me some idea on this , remaining will be very easier for me as they all are similar things to do....
Please let me know if you have any questions or I need to elabarate it more to get an Idea on this....
Thanks in advance

THANKS GUYS ,
     I wrote the transformation routiene to count all the parked documents as
IMPORTING
    request     type rsrequest
    datapackid type rsdatapid
    SOURCE_FIELDS-/BIC/ZPARKBEF TYPE /BIC/OIZPARKBEF
   EXPORTING
     RESULT type tys_TG_1-RSTT_IPTDA
DATA TMP TYPE tys_TG_1-RSTT_IPTDA.
IF SOURCE_FIELDS-/BIC/ZPARKBEF = 'Y'.
TMP = TMP + 1.
ENDIF.
     RESULT = TMP .
         But when I see the Infocube data its showing only 0 for Parked Before value 'N' and 1 for Parked Before vale 'Y'. But I want to calculate total number of parked documents ..How can I do this?
Thanks

How to block key figure value input in DP?

Similar Messages

Maybe you are looking for