How To Block Movement Type
Dear Experts
How to Blocked Movement type to do any movement .
which field in OMJJ for blocking the Posting of Any movement
Rgds
Pankaj Agarwal
Hi,
Inform your basis personnel to modify the authorization object -
M_MSEG_BWA Goods Movements: Movement Type
To ensure that the field BWART does not contain the movement type which you want to block. This will ensure that users will not be able to use this movement type.
Hope the above answers your query.
Regards,
Vivek
Similar Messages
-
How to block movement type 261 and 262 from several storage locations
Dear Expert,
Can we block the 261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block 261 and 262 movement type from these storage locations.
Thanks
PaulineDear Pauline,
if my understanding is correct abt ur query,
1) you want in confirmation screen, Consumption should happen only from one storage location
2) Rest all storage locations should not be allowed
3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
Plz refer this link for SHD0 Demo
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
Regards
Madhu Kumar -
Block Movement type 122 for T code MBRL
All SAP Gurus,
I want to block the movement type 122 for T code MBRL.
For this I used T code OMJJ, but here it is not showing MBRL as used T code.
If MBRL is not specified in OMJJ for 122, then how MBRL t code is allowed for movement type 122.
Please give ur valuable inputs.
Regards,
Edited by: Rajan R. on May 17, 2008 3:22 PMHi
Thanks for the reply
Now I want to block movement type 122 so that it can not be used throuh MRRL, is it posssible and how to do that?
I have alredy blocked MIGO for movement type 122
Edited by: Rajan R. on May 17, 2008 3:51 PM -
Blocking Movement type 309 for perticular user ID
Hello,
We want to block Movement Type '309' for perticular user ID.
How this can be achieved?Hi,
You can do it through autherization control ,
For Object
M_MSEG_BMB Material Documents: Movement Type
M_MSEG_BWA Goods Movements: Movement Type
M_MSEG_LGO Goods Movements: Storage Location
Revove the Movement type 309 , for the particular user.
Regards
Manish -
hello sdn users
this is deepak
did any one of u worked on a movement type which is copied from the standard
how to copy movement types
please help it was asked in an interview
thanking u in advanceHi,
Select the movement type and go to next screen. Give range as 101 to say Y01.
then you can specify target mvt types between this range. You cannot specify new mvt type as Z01 in this case.
hope it clarifies.
Seema -
Blocking Movement type 122 for T code MBRL
All SAP Gurus,
I want to block the movement type 122 for T code MBRL.
For this I used T code OMJJ, but here it is not showing MBRL as used T code.
If MBRL is not specified in OMJJ for 122, then how MBRL T- code is allowed for movement type 122.
Please give ur valuable inputs.
Regards,
Edited by: Rajan R. on May 19, 2008 10:22 AM
Edited by: Rajan R. on May 19, 2008 10:59 AMCheck the all authorization roles you have created for inventory management. In there you can take out MBRL from the list. Then, create a new role for transaction MBRL only, and then you can allow other movement types for this role except 122. Assgin this role to your users.
This is what I have done at two client locations. -
Blocking Movement Types using MB01
When processing goods receipt against a PO (txn MB01), is it possible to block certain movement types (or only allow some movement types) for PO type exchange orders? How?
Thanks in advance!By the way, this is for manual posting. Would that mean that I'll have to modify standard SAP and do some kind of verification process so that it will not allow the use of some movement types for PO type exchange orders?
-
How to change movement type of Delivery goods issue?
Hi all!
I need to change the movement type used by posting Goods Issue in an outbound delivery (tcode VL02N).
Please provide some instructions or cookbooks on how to do the configuration..
Thanks a lot!Hi,
Get the Schedule Line Category used in Sales order. Go to VA03, here double click on the sales order line item and go to "Schedule Lines" tab, here get the Schedule Line category.
And then go to VOV6 and double click the Schedule Line category and in detailed screen, change the movement type.
Then try for Delivery and PGI. -
How to change movement type 531 for by-product ???
Hi,
While creating production order (CO01), by-product component with negative quantity is automatically assigned movement type 531. Can anybody tell how this movement type is picked automatically ? How can it be changed to some other movement type (say Z31 i.e. copy of movement type 531) ?
Thanks,
BijayHi Bijay,
It might be better if i share it with you.While creating the order SAP automaticallly assigns the movement type.The order created is of Devlopment class CO and GI-BY-Order is by default 531.
As you were talking about.SAP has provided us the transaction OPKA to adjust if the change is required.So please give it a try.Hoping it be you help.
Have a best day ahead. -
How to reverse movement type 647
Hi Everyone,
Need to reverse the GI (movement type 647) posted for Intra Co STO.
Tried using MIGO or MBST. We are getting error message: m7130 (Material Document cannot be processed)
The only allowed transactions that I found in OMJJ for movement type 647 are --
MB11
VL01
VL01N
VL01NO
VL02
VL02N
VL03N
VL08
Please let me know how should I reverse this GI posting.
Thanks & Regards,
RaviThanks Jürgen. Yes I could reverse the GI. But because VL09 was not listed in the allowed transactions for 647 I had not tried it earlier. Could you help me understand why it is not listed in OMJJ?
-
How to restrict movement type field in MIGO Tcode
Hello there,
I want to restrict the users for 103 movement type through MIGO tcode.
I have searched for the objects and assigned the value 103 in the movement type field, but it is not solving my problem.
Is there any other way?
Thanks in advance.
Regards,
Priya.If all your users are need to be blocked from using 103 movement type then go to OMJJ@Movement type 103@Allowed transaction@here remove the assignment of 103 with MIGO
If you want to do it through authorization then try out with your BASIS person M_BEFU_ALL for all authorizations in Inventory Management
Regards,
Indranil -
How to config movement type 261?
Hi, all,
My process GI to production is as follows,
1. Stage material from a storage bin to 914
2. Issue material from 914 to production with MB1A/261(movement type)
My question is: when I finished the MB1A/261, the system also generated a TR which I wouldn't deal with any more concurrently, so there're lots of such TRs stacked in the system as time goes by...How can I config the movement type 261 to fulfil this purpose?
Thanks
MichaelHi,
Try MIGO with Goods iusse and order option processing with your order number.
In the WM tab there is an icon for " No Transfer Requirement". Try out this option.
Regards,
DilliB -
hai sap gurus,
can u clarify my problem,
how to create a movement type and where we assign that movement type to gl account
clarify pleaseHi Ram,
You can create Movement type in OMJJ transaction by Copying the existing mvt types. Once you copy the mvt type all the details from the existing mvt type will be copied to new mvt type.
Based on the Account grouping the system will identify the G/L accounts. You can check this OMJJ transaction you will get better idea.
One more thing why you need the new mvt type, if it is really required then go for new mvt type otherwise use the SAP standard Mvt type which will serve all the purposes.
rgds
Chidanand -
How to know Movement type details
hi experts
to Know about the Movement types Details is SPRO-MM-Inventory Management & Physical Inventory-Movement Types-Copy, Change Movement types and Click on Documentation
here until " change movement types " i followed
after that where to go and check for the documentaion
can you explain the steps
thanks
ganeshGo to SPRO-MM-Inventory Management & Physical Inventory-Movements Types- and Here Select the Doucmentaation Icon Prior to Radio button of Copy, change Movement Types
Here you will get all the Movement type Details........ -
QM Quality Module - error in transfer insp to blocked via move type 350
QM Notification - Additional Functions in Action bar - error in Insp to blocked (movement type 350)
We are trying to implement the movement of goods from inspection to
blocked stock through QM. We have added an item to the action bar and
are using movement type 350.
We have implemented several inventory transactions via the action bar in Quality notifications. All the transactions work except this one. We get the message "Must change Inspection Quantity in QM system". This is Movement type 350. The Inspection to Free (Movement type 321) works fine, as do Blocked to Inspection (type 349) and Free to Inspection (320).
Has anyone encountered and resolved this?Dear LudovicBento
You cannot run this FM as QM stock can be moved only by QA11 tcode. You may try to create a BDC to post the material
from Quality
Regards
Gajesh
Maybe you are looking for
-
Error while creating Report from template
Hi Experts, I am getting an error message when I am trying to view MSDS. All settings related to GV, Validity, Real sub etc are fine and were working properly until yesterday. Error message is as follows...... (windows cannot find "C:\Program files\S
-
[Solved] Can't get external monitor to display correct resolution
I have a laptop with 1280x800 resolution, I hooked up a spare monitor we had sitting around that has a native resolution of 1280x1024 to my laptop. When I hook it up the external monitor displays a resolution of 1024x768. I use KDE 4.5, so I tried to
-
How do I initialize/format a Lexar usb drive
The topic pretty much says it all. I put in a lexar usb drive and wanted to initialize in in OS 9.2.2 as HFS+ and can't figure out how to do it. I wanted to use it to back up some files without losing the resource fork, if there is one. Thanks for an
-
Midlletier AS(10.1.2.0.2)hung at 95%
Hi, Am installing Middletier AS 10.1.2.0.2 on redhat-4.However thr installation is getting hung at 95%.I tried over n again but its hung . My installer logs contains this: Install Type: J2EE and Web Cache Services Configured Components: Oracle HTTP S
-
Hi, If we habve EBP and SUS in same client do we need XI for connecting the two systems. Thanks, Manu