How to block the business content background activation

Hello!
I need to block the BC activation in background (we want to prevent the problems with overwrite the active versions of objects).
Does anyone know how to do it?
Any authorization? There is the "S_RS_ADMWB" authorization with activity "CONT_ACT" (Activation of BI Content) but I tested and does not allow to divide between online and background.
Many Thanks!
Message was edited by:
Miguel Costa

Similar Messages

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

How to see the business content workbooks

Hi All,
I have installed some of the business content workbook from RSA1 and want to see them in Bex analyser , i can see some of the already avilable workbooks there with my user id , but when iam clicking on that the system pop ups "Cant find workbook on the server".
Moroever , how can i see the workbook that i installed from business content.
Regards,
Akash

Hi Akash,
Did you found any solution for this, please tell me how we can see the business content workbooks in Bex Analyser.
Thanks
Sanjay

How to Extract the Business content Master Data

Hello,
I activated Master Data Business content 0NOTIFICATION_ATTR and 0NOTIFICATION_TEXT on ECC6.0. these are belongs to "Quality Management Master Data"
How to fill the data right now it had 0 records
Do we need to fill the setup tables?
Thanks

hi roshan,
if u r loading from a flat file ,do follow thw below steps
Uploading of master data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
1. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
2. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to select Insert Characteristics as info provider
u2022 Select required info object ( Ex : Employee ID)
u2022 Under that info object select attributes
u2022 Right click on attributes and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
Regards
Ani

How to find the business content cubes..

Hi bw guru's,
how to find the standard cubes and how to map the fields for our reuirements..can any one help me ..in this scenario..
thanx in advance..
uma reddy

uma,
help.sap.com is a reasonably good source of information on available business content. For example, here is an overview of BC for NW2004s:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
As you drill down you can often (but not always) find information on how the BI infoobjects map back to source system tables/fields. For instance, this link shows this information for sales order header information under NW2004s:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
As you navigate you'll want to take care that you're looking at information related your system version and business content level.
Hope this helps.
Bob

How to block the desktop picture /background from changing?

Since I have the Magic Mouse, some time my background changes the desktop photo
It happens when I move a photo in iPhoto or even when I move it on the desktop: I guess it happens
with the combination of the mouse and my movements with the fingers on the mouse itself
Never happened before. Every system preferences has a lock but the desktop.
Any good idea would be much appreciated : )

as you say there is no lock in that preference pane. you can do the following. set the desktop background as you want. in finder go to home directory/library/preferences. select the file com.apple.desktop.plist and enter command+i. in the resulting popup check the box "locked". this file contains preferences for desktop background and locking it will prevent any changes to the desktop background until you unlock it.

How to Transport the Business content objects using Transport connections

Hi BI Guru's,
I have installed the BW statistics cubes in BW Devlopment and i want to Transport the same things to Quality using Transprot connection. Please send steps and tips for Transporting the BW statistics collected objects.

Hi ,
While installing have you given any package and created request for this activation? If yes go to SE 09 and release your task and then request. And receive this in STMS in BWQ.
If you do not have created request and saved it in $tmp while activation then you have to go to RSA1 > transport connections> select your cube > grouping> only necessary objects> collect automatically> and press transport button this will give you request no > and then release this request> then go to BWQ> stms> select source system> select your request> and press import request button(white truck sign)> do necessary settings > and say OK. Once your request status is green then its successfully received in BWQ.
Hope this helps.

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Error in Activating the Business Content Infocube 0CRM_C08

Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUN

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to read the business partner activity

Hi experts,
How to get the business partner(role:employee) assigned activities in crm and how to create the activity .my requirment is change the assiged from old employee(bp) to new employee(bp). i have to develop the program. i searched some BAPI's.
Please help on this.
thanks,
venu.

Pls use the FM CRM_REPORT_CALL_RF. Pass the partner function to the exporting parameter table ir_partner_fct_h and partner number to the partner number to ir_partner_id_h . You will get all the guid and then use CRM_ORDER_MAINTAIN to change the partner.
CALL FUNCTION 'CRM_REPORT_CALL_RF'
    EXPORTING
      iv_stat_open            = 'X'
      iv_maximum_hits         = ' '
      ir_object_type_h        = it_act_objtype
      ir_partner_fct_h        = it_partner_fct_h
      ir_partner_id_h         = it_partner_id_h
    IMPORTING
      et_guidlist             = it_guid
    EXCEPTIONS
      parameter_error_partner = 1
      parameter_error_items   = 2
      parameter_error_ref_obj = 3
      OTHERS                  = 4.

How to Activate at least one part of the Business Content of CO-PA

Dear Experts,
Is ther any chance of Activating at least one part of the Business Content of CO-PA, like Info Objects and key figures in the BI Content, berore replicating the CO-PA Data source?
As the structure of the info cube should correspond to that of the related operating concern, But BI
donot support predefined Business content for any operating concern.
Experts kindly sugest in this point of view. And also kindly provide live senario's with CO-PA
Extraction.

Hi
If i got your question properly
If you are talking about any operating concern BC Data sources , we dont have any BC Ds for COPA operating concern
can use KEB0/2 to work on COPA
COPA datasource enhancement
Re: copa
Edited by: Aduri on Dec 30, 2008 5:10 PM

Error while activating the Business Content

Hi BI gurus,
I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
Can any one give solution for this. This is very urgent,
With Regards,
Balachander.S

And also check whether there are any dumps in ST22.
Khaja

How to install the standard Cube 0PM_C09 in the Business content in BW ?

Hi ,
Experts,
Standard Cube *0PM_C09 is not available in the Cube.
Standard Cube 0PM_C09 is not exist int the Business content.
Suggest me what to do !!!!!!!!!!!!!!
Thanx.
Asit

Hi Asit,
Most probably you need to update the BI_CONT component in your system via SPAM.
Go for the latest SP available.
Regards,
Srikishan

How to block the business content background activation

Similar Messages

Maybe you are looking for