How to block top-level domain names in rules for EOP?

Using EOP for email filtering to/from our on-premise Exchange server.  How do I block entire top-level domains in the rules section under mail flow?  For example, w need everything ending with .link blocked.  Right now I
have only been able to block email addresses and full domain names.  I know I can setup a transport rule in our exchange, but I'd prefer EOP handle this before like it should. Thanks in advance.

If you're using EOP and your goal is to block stuff coming from a certain geographic area then you need to go to your exchange admin center select Protection>content filter>Default Policy>International Spam>Filter email messages sent from the
following countries or regions

Similar Messages

  • DNS Server does not resolve new generic Top Level Domain names- CNR configuration issue?

    Hi all,
    I am not sure if this is the correct community to post this question, but I will give it a try. I noticed that the users of my network cannot resolve web sites using new top level domain names, like ".education", ".international", etc. I have an internal DNS server made by Infoblox and a Cisco CNR v6.3.3.1 as an external DNS server. Infoblox uses CNR as its forwarder and CNR uses the root DNS servers for queries.
    I would think that CNR was the problem because it is an obsolete product but after speaking with a fellow engineer at another organization where they still use an older version of CNR than mine, they have no problems at all. So now I am thinking it is a setting either on Infoblox, or on CNR I need to change. I can see Infoblox is forwarding the requests to CNR but that's about it. I am not sure if CNR is discarding the request. When I do an nslookup from a PC in my network it does not matter if I set my DNS server to be the Infoblox or the CNR. Neither resolves the URL.
    Then again, no matter what I lookup using the CNR as my DNS, I only get a response with the root DNS names and IPs!
    Any help is appreciated!

    Hi Constantinos,
    Have you taken a look at the infoblox community site?  We've just reposted your question there and alerted some internal SMEs that should provide a solution soon.  
    https://community.infoblox.com/forum/ddi/dns-server-does-not-resolve-new-generic-top-level-domain-names-cnr-configuration-issue
    Best,
    Eric

  • How to connect top level domain database to subdomains

    Created subdomains for the top level domains. Need to learn
    how can we connect centralized database in the top level domain
    with the subdomains code in coldfusion.

    If you're using EOP and your goal is to block stuff coming from a certain geographic area then you need to go to your exchange admin center select Protection>content filter>Default Policy>International Spam>Filter email messages sent from the
    following countries or regions

  • Block Top Level Domain (.eu)

    I'm trying to configure a transport rule in Exchange 2013 to block all emails from the TLD .eu   We get nothing but a TON of spam that is not caught by the Exchange 2013 spam filter, and it's always from a different domain. I have seen guides for
    2007 and 2010, but nothing for 2013.
    Do I just use the rule "The sender domain is" and use the value ".eu"? I just want to verify this is the correct way to block a TLD.

    Hi Jsilveri,
    You can use Sender Filtering feature:
    Set-SenderFilterConfig –BlockedDomains
    http://technet.microsoft.com/en-us/library/bb124087(v=exchg.150).aspx
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support
    That is the same answer as before. The domain changes with each spam message. I need to block anything coming from a .EU top level domain. So domain1.eu , domain2.eu should all be blocked with 1 rule.

  • How to stop location bar autocomplete from using top-level domains?

    I love the location bar autocomplete - or at least, I used to. I had it trained to the point where typing one letter was enough to bring up the pages I used most often. But now with Firefox 12, it ignores all that and favors top-level domains.
    For instance: I haven't been to the front page of YouTube in years; there's no reason to go there. When I would type "www.y" into the location bar, it would pop up to the one video I visited most often - and that's exactly what I WANTED it to do. Now it defaults to "YouTube.com" and I have to scroll down to find the actual page I want. Same deal with Wikipedia: I don't want to go to the front page, I want to go to the page I use most often for research.
    So basically, what do I need to change to get the location bar autocomplete to stop giving me top-level domains I don't want, and go back to giving me the subpages I spent years training it to favor? Scrolling down to the right entry is a waste of time when typing one letter and hitting enter should be enough to do it...

    And I meant the actual location bar, not the dropdown menu below it. The dropdown is fine: it's the autocomplete '''in''' the location bar that needs to be fixed...

  • Naming your top level domain

    I am setting up a new directory server for our organization, we'll call it direct.org.
    I would like to know how you determine which way to name your top level domain.
    o=direct
    o=direct.org
    dc=direct,dc=org
    Most of the organizations around us use the "o=xxxx.org" or "o=xxxx.edu" so I set up our test server as o=direct.org. Before I put this thing into production I wanted to find out what factors are used to determine how you define the top level domain.
    We are, in a sense, an ISP. However, our only clients are educational institutions.
    I took Sun's Directory Server class last year and I asked this question in class. It seems that nobody could come up with a clear answer to this question.

    For LDAP V2 - use o=direct.org
    for LDAP V3 - use dc=direct,dc=org

  • Realms with different top-level domain

    I'm testing OCS 10.1.2 and I am interested in setting up multiple realms.
    Must all realms be in the same top-level domain? I see in the examples (like in Note Note:317434.1) names like this:
    - Default realm created at install:
    dc=us,dc=oracle,dc=com
    - Additional realms created by the administrator post-install:
    dc=uk,dc=oracle,dc=com
    dc=ca,dc=oracle,dc=com
    A more typical example for what we need would be:
    dc=company,dc=co,dc=uk
    dc=company,dc=no
    dc=company,dc=de
    Is this possible?

    What are the consequence of that? Any practical problems?
    I see in Note 308682.1 that the top level of a top level domain is NULL. So maybe instead of world you can use an empty top level domain.
    However, this document refers to mail and not OID.

  • IMessage and new Top level domains

    My new email address has a new top-level domain (.kiwi instead of .nz) - I am trying to get iMessage to allow the use of that address, but the verification email never arrives.  Anyone know a way to convince Apple that my new email address is legitimate and can be used for iMessage and FaceTime?

    Hello The-Organist,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple ID issues:
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/ht5622
    How do I verify my Apple ID by email?
    Simply follow the link in the verification email that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address. You can also verify by signing in at My Apple ID. You'll receive an email prompting you to verify.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How to enable "top level navigation " in portal

    Hi all,
    I am unable to see the "top level Navigation" once I logged on to portal
    Previously I was able to see that
    I performed the following steps thats the reason why I am unable to see "top level navigation"
    1 Logged on to portal
    2 Content administration
    3 Expanded Poratl Content
    4 Expanded Content Provided by SAP
    5 Expanded End User Content
    6 Expanded Standard Poratl Users
    7 Selected "Default Frame work Page"
    8 In that selected Top Level navigation Iview and the iveiw properties I changed the property "Number of Display Levels " to "0" and choose save
    As I have set "Number of Display Levels" to "0" I am unable to see "top level Navigation" Now,I want to change it to 2 for that I need to see the Content Administration role in the "Top Level navigation" Can anyone help me out how to enable "Top level Navigation"
    Thanks in advance

    undo the changes what you have done.
    after you logon to the portal try the url below...this should take you to content admin directly from there modify the framework page and reset the property of TLN
    http://yourserver:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.portal_content&iview_mode=default
    Thanks
    GLM

  • What does the top level instance name "iop" mean?

    What does the top level instance name "iop" mean?

    Dear Humility,
    In general term higher level account group means which account group is used to the higher level customers in the Customer Hierarchy process.
    Or
    Which of these account groups are valid for higher-level customers in the hierarchy.
    I hope this will help you,
    Regards,
    Murali.

  • Service interruption when adding cluster top level domain in CUCM 9.1.2?

    I need to add a top level domain in CUCM 9.1.2. Will this result in any downtime or endpoint resets?

    Hi,
    No, it is not service impacting. It does not require any reset of devices or services.
    HTH
    Manish

  • How to retrieve username and domain name on Macintosh.

    Hi,
    Can anyone tell me how to retrieve username and domain name on Macintosh
    Thanks
    Priyanka.

    There is no system property for the domain name.
    Can you please tell me some other way for solving
    this problem.No. If it's not an environment variable (System.getEnv IIRC) and no property, you can't get it without native calls using JNI or Runtime.exec/Process.

  • Email address with new top level domain (TLD)

    Hi all,
    Apple does not recognise the new top level domains. My company has a new domain e.g. aaa.systems and os x says that the email [email protected] is not valid!
    Please help.

    This will work partly. But the mail address will still be [email protected] and gives an issue with the outgoing mail server.

  • How to merge top level navigation into detail navigation panel.

    Hi All,
    I want to add all the contents of top level navigation into detail navigation panel and  remove top level navigation.I am looking for the code with which i can shift the top level navigation to detail level navigation.

    You could edit the top-level navigation iview and set the <b>Number of Display levels</b> property's value to 0.
    you can reach the Top-level navigation iview by going through the following path
    1) <b>Content Administration --> Portal Content --> Content Provided by SAP --> Admin Interfaces --> Top-level navigation</b>
    However, note that once you do this the whatever menus that are available in the top level will not be available anymore.
    Maybe, you could copy the standard Top-level navigation into a framework page that you have created and then make the change. After doing so, you can assign it to groups/roles you want. This will ensure that the CONTENT/SYSTEM/USER administrators see the normal portal framework and specific user groups alone dont see the Top level navigation..
    Pradeep.

  • One Arm config Domain Name Content rule

    Hi Guys
    How does domain name content rule works in one arm config.
    What do we put in source groups as VIP address.
    Does it need host headers in WebServer as a requirement.
    How does the client request gets completed.
    Any help much appriciated..

    Thanks for your reply Jim,
    This is what I am trying to do in a One arm config topology
    ( As the CSS guide ( cntntgd.pdf ) says under Configuring a Domain Name content rule)
    The CSS allows you to use a domain name in place of, or in conjunction with, a
    VIP address in a content rule. Using a domain name in a content rule enables you
    to:
    Enable service provisioning to be independent of IP-to-domain namemappings
    Provision cache bandwidth as needed based on domain names
    So I am trying to create a content rule with a domain name instead of VIP address. For ex.
    content domainRule3
    protocol tcp
    port 80
    url "//domain.com/*"
    add service Serv1
    active
    group servers
    add destination service Serv1
    VIP address  ???????? ( what shd we put in here )
    In this case what do we put as VIP address in source groups and how does the traffic flows from Client to actual Server in One arm topology. I am trying this topology where we have multiple sites configured with the same IP address with host headers
    My assumption is that I shd configure DNS servers with VIP address for domain.com and use that as VIP address in source group. But how does the actual traffic flows from client to servers
    Many thanks.

Maybe you are looking for

  • Comparing Two Jtree Objects

    Hi I had constructed two JTree objects. Now i want to find the difference between these two JTree's Node wise.I dont have any idea how to proceed further.If some one help me in this regard i would be very thankful. -Rosy

  • Error: Fatal error in function BldAlter on call to function GetOldRecDefn.

    At step "Generating the Updated PeopleTools Script" to generate "PPLTLS84CURTables.sql", more than 2270 errors occured: Example Error 1: System Error : File: E:\pt85403d-retail\peopletools\src\psbld\bldalter.cppSQL error. Stmt #: 4550  Error Position

  • Need help on this program

    Hi all, The purpose of this program is listed in here: // Inputs the miles driven and gallons used (both integers) for each tankful. // Calculates and displays miles per gallon obtained for each tankful and print // the combined miles per gallon obta

  • Query correction

    hi..good evening... i have with sale_order as (         select 25 sd_code, 'P01045645' sd_prod_code, 10 sd_qty from dual union all         select 25,'P01400025'  ,  35 from dual union all         select 25,'P01033691.3',  40 from dual union all      

  • I/0 Error

    Hi, this is the 3rd time that my iMac gets slower and slower until it freezes. When I force-restart and try fsck -f, disk repair stops with "I/0 error; invalid sibling link". It can't start up again, resp. it quits startup and reboots endlessly. I st