How to Boot from Leopard Upgrade disk??

I bought a Leopard upgrade disk last year for my iMac. Today I am having computer troubles. But there seems to be no diagnostic programs on the Leopard upgrade disk, nor does it seem to be a bootable disk. What should I do next?
The problem with the computer is, everywhere I click I get the rainbow colored spinny wheel. When I want to open an app, I get the spinny wheel. When I want to scroll in a window, I get the spinny wheel. It may take several minutes before the spinny wheel goes away, and the command carries out. Illustrator flat out refuses to launch, as well.

That's different. It's not an upgrade disk. It should be bootable. Insert the disk in your Mac and reboot while holding down the 'c' key. What OS are you running? What model iMac? Give some some info please. It will not have hardware diagnostics on it. It will have Disk Utility so you can run Repair Disk.

Similar Messages

Mac Pro gets kernel panic while trying to boot from Leopard install disk

Hi all,
I'm finally getting around to installing leopard on my 2006 Mac Pro. It has the x1900 video card from Apple and all firmware is up to date. The install disk upgraded my Macbook with no problems.
When booting I get the wipe to grey, kernel panic, "You must restart your Mac" screen. Any suggestions?
BTW the Leopard install disk installs OSX 10.5.0
Thanks
Pax

I finally found that the mac pro needs installer 10.5.2 or it will do the kernel panic thing. I did find a way around this though.
1) I took an external drive hooked to my macbook and installed 10.5 on it. Then booted from it and did all the updates, installed all my necessary software (ilife 08, parallels, and so on).
2) I then made sure my Mac pro's drive was currently backed up and then booted up from the backup and then used Carbon Copy Cloner to clone the new OS 10.5.4 Leopard disk onto my Mac Pro boot drive.
3) After that I used migration assistant to transfer all my user settings and such.
It all worked great and I now have Leopard on my Mac Pro.
Just thought I'd let everyone know how I got around it.
Pax

Video Ram failed, won't boot from Leopard Install Disk

Hello,
Recently, I ran the techtools software, and got a report that my video ram had failed. It was suggested that I attempt to reinstall OSX. I put in the Leopard install disk, click the install or setup button or whatever it is, click to restart. When it restarts, a gray screen comes up, but the computer never actually boots up, from either the DVD or my hard disk.
Any suggestions?

Welcome to the Apple Discussions!
Since your MacBook is still very new, you shouldn't have an problem with the DVD. If I were you, I'd call AppleCare Support and have someone walk you through re-installing Mac OS X. However, I really doubt this will help resolve what seems to be a hardware failure on your MacBook. Hopefully the folks at AppleCare Support can help figure out if you need to send your MacBook in for repairs.
-Doug

How to boot from Panther install disk?

Hi,
May be a stupid question but I want to boot to my Panther install disk1 to repair my hard disk. I start the computer with the cd in the drive but it never boots from the cd. How do I do it?
Thanks,
Dave

Dave,
Insert the Panther Install disc, then restart the computer while holding the C key.
You may also want to read Using Disk Utility and fsck to resolve startup issues or perform disk maintenance.
;~)

Solaris x86: How to boot from Veritas mirror disk?

Hello team,
We are using trailware Veritas Storage Foundation (VxVM) on Solaris 10 x86 system and need help in booting from alternative boot disk(Mirror disk).
Steps did :
1. Mirrored the root disk group using veritas volume manager command *"vxrootmir"*
2. Updated the bootpath with mirror disk path in /boot/solaris/bootenv.rc
Updated the EEPROM information:
# bootadm update-archive -R /a
3. Edited the grub configuration file, /boot/grub/menu.lst
Created the following entry similar to primary disk entry to allow the root disk mirror to be booted
title Oracle Solaris 10 8/11 s10x_u10wos_17b X86 <VxVM: Alternate Boot Disk>
findroot (rootfs0,0,a)
kernel /platform/i86pc/multiboot
module /platform/i86pc/boot_archive
4. reboot -- -r
At the time of boot, selected the newly added entry from the grub list and got the following error,
*"Reboot and select proper boot device or insert boot media in selected device and press a key".*
I am unable to move further from here, is this because of the veritas trial version we are using ?
Please help in resolving this issue and also explain the step by step process of booting from alternative boot disk on a x86 machine.
Let me know if you find anything inappropriate. Looking forward for your replies.
Thanks in advance.

Hi--
I have not seen this message before but a quick google search says that is pretty common and is related to the system
trying to boot from a different device (not the one you intended). Can you check your BIOS settings and possibly remove
devices from the boot order setting... Otherwise, I would suggest running installgrub on the disk that you are trying to boot
from.
I'm curious why you are trying Veritas. Is there a Veritas feature that you need? You might consider trying ZFS if you haven't
already. Its very simple to set up and use.
Thanks, Cindy

How to boot from a repairing disk error? Windows 8.1

Hello,
I installed the iCloud yesterday for my iPhone 5s, and then a box popped up saying to restart and so I clicked OK as you do as i needed
to restart my PC anyway. So it restarted and went into Automatic Repair and now every time i start my computer it goes into this and then goes to a black screen, i need my computer for school and exams so need this sorted pretty quickly. i have read that it
is a common problem, but i can't seem to get F8 up the only think i can do is go into my motherboard settings and from there i can boot it form my SSD where the boot file is but this just tries to load it and goes to Automatic Repair. i can't get Microsoft
to help me as i need product identification number which can only be found when you have booted up the computer. Idiots !!!! Please can some one find me a step-by-step guide as I need this sorted quickly as i am in the middle of my exams. Thank you. Zach.

Hi,
Apologize for the late reply.
Do we have a Windows repair disk available? If yes, we may consider to take a system restore from there. We could contact the manufacturer to get a repair disk.
a) After you boot your computer using Windows DVD or System Repair Disc, a black screen appears with gray text "Press any key to boot from CD or DVD". Press any key.
b) Select the correct time and Keyboard type.
c) Click Repair your computer in the lower left corner.
d) Select Troubleshoot from Choose an option screen.
e) Click Advanced options in Troubleshoot screen.
f) Select System Restore.
======
Or take a try to do a selective boot up with bios:
get cmd to open and check
bootrec /fixMBR
bootrec /Fixboot
bootrec /rebuildBCD
and also
chkdsk /r c:
chkdsk /r d:
chkdsk /r e:
chkdsk /r f:
Hope this may help
Best regards
Michael Shao
TechNet Community Support

How to boot from Lion without disk

Iv'e done this before but seem to have problems remembering which keys to holddown during restart to get to disk utilities Comand R?

Cmd-R doesn't always work. If not, hold the Option key while starting. That will show the Startup Manager, where you can select from all available startup sources, including the Recovery HD:

My iMac will not boot up from the Leopard upgrade disk nor will it eject it.

My iMac is very slow and sluggish. Followed online instructions to use the Disk Utility to run repair. After doing so it told to reboot my system from the install disk and then run the Disk Uitility to run repair from it. I put in my Leopard upgrade disk and tried to reboot. I get the chime and the Apple logo and hear the disk trying to be read, but after about 5 minutes my iMac shuts completely off. I have tried to eject the disk using all the methods found in the community and nothing works. I want to try my orignal Mac OS X install disk to see if that works. My computer is about a 2007 model. It worked great until just a couple days ago. Frankly I can't afford to take it in so I will have to figure this out on my own with your help. :-(

I cannot open terminal. When booting I get the gray screen with the Apple logo and the twirling comb goes for a while and shut the computer completely off.
I got into the single-mode user and learned the following: disk1s3: I/O error. SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Singleuser boot -- fsck not done
Root device is mounted read-only.
If you want to make modifcations to files: /sbin/fsck -fy
/sbin/mount -uw /
I typed in the drutil eject and got:
SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Library not loaded. Reason: not suiteable image found.
It did find:
/system/library/rivateframeworks/installserver.framwork/versions/a/installserver : unknown file type, firfst eight bytes: 0xCA 0xfe 0xba 0xbe 0x00 0x00 0x00 0x04 Trace/BPT trap.
I have tried holding the left mouse key, the eject key and nothing happens. To bad I can't pull the
thing out with tweezers.
So where do I go from here?

Leopard lost my external HD, how to boot from Tiger

When I upgraded (?) to Panther, it wanted to do a backup to my external HD, but it was going to be to large, so I told it not to. The next day when I started up, I typed in the password to my external HD and got a window saying Device not found. I have been following the discussions af many others with the same problem, so I'm getting experimental
I would like to boot from my Tiger disk, but when I insert it in the DVD drive and choose it in startup disk, it restarts, but wants to install. What I am trying to do is to boot from my Tiger disk, turn off password protection for the external, then go back to Leopard, hopefully to a useable external again.
How do I boot from an install disk so I can get to my dock and Finder?

David Tinker wrote:
When I upgraded (?) to Panther, it wanted to do a backup to my external HD, but it was going to be to large, so I told it not to. The next day when I started up, I typed in the password to my external HD and got a window saying Device not found. I have been following the discussions af many others with the same problem, so I'm getting experimental
I would like to boot from my Tiger disk, but when I insert it in the DVD drive and choose it in startup disk, it restarts, but wants to install. What I am trying to do is to boot from my Tiger disk, turn off password protection for the external, then go back to Leopard, hopefully to a useable external again.
How do I boot from an install disk so I can get to my dock and Finder?
You have the right idea. It would be easier if you had another computer with Tiger.
Try this. Boot into the Tiger CD by holding down the "C" key but do not install anything, In the Utilities menu you should have an option to log in as a single user in the terminal mode.
From there you can access the external HD and turn off the password. You will need the instructions how to do this in a terminal from the HD manufacturer or someone else on these boards who had done it before.

Should I boot from external hard disk and how do I achieve this?

I'm in a downward spiral and need advice about if booting off of an external hard disc is the right thing to do and how to go about it. How I got into this mess I'll write below. My immediate problem is that I want to be able to install a copy of osx 10.5 from the original disks that came with my computer onto a usb hard drive. Then I want to boot from that drive and install software such as disk warrior on the same external hard drive in order to repair and recover the files on my internal hard disk. Not sure if this is easy to do with the install disk that came boxed with my macbook. So is what I want to do feasible and how do I do it? Thanks.
How did I get into this mess?
For those with time to read more. A downward spiral (and my macbook was working fine)::
I have been backing up my work documents onto a 20 GB pendrive waiting to get the money to buy an nas to work with time machine for the two macbooks we have at home as a place to backup photos and video. I bought a network drive but it wouldn't work with my macbook; my time machine backup freezing at 3 gb, but works fine with wife's macbook pro.
I tried to do TM backup on a usb hard disk and got the same problem. Support forums indicated that hard disk problems could confuse TM, so although I was experiencing problem free computing I ran disk utility from internal osx. This indicated an <invalid node structure - file system verify or repair failed> at the checking catalog file stage. So I followed instructions to run disk utility and repair from the installation disk. When I ran disk utility from installation disk I get exactly the same <invalid node structure - file system verify or repair failed>. It gets worse.
After failing with install disk utility, I could not then boot from my hard disk (I had had trouble free computing up to my attempts to use TM) or eject the disk. At first attempt I had no option but to boot from dvd again as hd not offered as an option. Second attempt hd option available but fails. By reading advice given to others I managed to eject the dvd and have tried:
safe boot - it won't
boot in verbose mode and single user (indicates I have disk0s2:I/O error) and won't boot
try to use disk utility from install disk to create disk image on external hd, it won't (cites i/o error)
If I can boot from an external I will try to repair with Disk Warrior as forums indicate that this software has been able to solve <invalid node structure> issues (but am open to recommendations of other products). I also hope that I may be able to try again to burn a disk image sucessfully if this repair works. I'm still trying to save my photos and videos that aren't backed up.
I plan to try an archive and install installation but first I want to try a repair with disk warrior as I fear that archive and install won't work and I'll end up having to erase and repair my hard disk.
I feel like some perverse god is punishing me for trying to do the right thing and back up my hard disk.
Macbook 5.1 late 2008
Intel Core 2 Duo
OSX Leopard 10.5.8
85 GB of a 150GB hard disk needs backing up (saving)

I am not sure about this, but my memory is that if you try to partition the drive (in OS 10.5.8) it will erase the data.
But you can try. Go through the Add a partition steps, but watch for any warnings. If my memory is correct there will be a message to the effect that everything will be erased. If you see that, do not proceed. This page has info about how to do it, if it can be done: http://www.macworld.com/article/1164643/live_partition.html
With respect to DW on an external, I do that. I have a 80 GB external - I call it Emergency - with an OS, DW and TechTool Pro on it. (Since I have is a recovery partition built in with all new OS, Emergency would be of use only if I need to run DW or TTP.) I have never yet had to use it, but it's there. It is not usually connected - I just did that for this screen shot.

2008 MacBook Pro won't boot from Leopard DVD or Target Disk

Yesterday I was working on my MacBook Pro. I use FontExplorer to manage fonts. I ran the conflicts diagnostic looking for missing font files, which returned about 200 results (I was expecting this). I've moved the fonts installed by Adobe/Microsoft out of my fonts folder in my user library (user library, not system). For some reason the computer started to become very slow, to the point of beachballing. The freezing seemed to start and stop. I was able to close FontExplorer and Illustrator without force-quitting. I tried to shut it down gracefully at that point but it froze up again, so I hit the power button to force a restart. It started up but now it hangs on the gray screen right before the Apple logo. The logo doesn't come up, I can hear the drive spinning as normal but it doesn't do anything.
I've tried booting from a retail copy of the Snow Leopard, but it doesn't work. I can hear the disc spin up in the DVD drive as though the computer is about to read it, but nothing happens. It just stays on that same blue screen. I've tried booting my MBP in Target Disk mode from my iMac. The target disk icon appears, however it just sits in the middle of the screen and my drive doesn't mount on the iMac. I've noticed now that the white status light on the front of the MBP (on the latch) doesn't come on, and if I cover the speakers the backlight doesn't turn off.
What do I do now? I have an enclosure I could use to try and boot the MBP's drive from, but I'm running out of options. I'm really starting to worry about my data. I have a major school project that's already late which is on there, and I don't have a recent backup. If I don't hand it in... let's not go there. I don't understand how this could happen; I take very good care of my computer, I turn it off when it's not in use, and I run Cocktail on it once a day which does a SMART status check.
Help?

sig,
The first thing I tried was booting from the install disk. The 2008/2009 MBP's aren't able to boot from a retail DVD of Snow Leopard, which is why I ended up using the original hardware-specific install disk that shipped with my computer. That didn't boot either. I was able to view the drive in Disk Utility when it was in the enclosure, but the partition with my data on it would not mount. I attempted a repair disk on the drive but that failed. It wouldn't mount in Terminal either. I considered trying to rebuild the volume catalog using TechTool Pro but there's the possibility that could actually make things worse. So I've taken it to the repair shop. They're running it through DiskWarrior overnight, last I heard there were 60-something thread errors. Yesterday my SMART status was fine, today my drive is dead. What happened? Hoping for the best (but expecting the worst).

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

Help please: how to boot from clone/external hard drive because "disk cannot be partitioned because some files cannot be moved"?

MBP Retina 15" MID 2014 2.5Ghz
OS X Yosemite 10.10
I have a external HDD and want to erase and restore my laptop so I can install windows via Bootcamp Assistant but I don't know how to boot from a clone to fix the issue and am not sure if when I erase and restore I will still have Yosemite 10.10? I have no way to reinstall the OS if I lose it. An average user friendly guide would be greatly appreciated please

I do not think you have to erase your MacBook's disk in order to install Windows. First of all you can try a few things before formatting the disk.
The first thing you should do is to check that your MacBook Pro's drive is OK with Disk Utility (in /Applications/Utilities). After opening it, choose "Macintosh HD" in the sidebar and press "Verify Disk". If it gives you any error, you will have to boot your Mac in OS X Recovery (press Command and R keys while your Mac is starting up) to repair Macintosh HD (the steps are the same but pressing "Repair Disk" instead of "Verify Disk").
After you have repaired the drive, boot up in OS X and try partitioning the drive again with Boot Camp Assistant. If it does not work, you will have to format the drive and reinstall OS X, but I will give you these steps only if this does not work.

Os9 upgrade failure, How to boot from cdrom

hello world... following the instructions... almost...
on the Ultra 5 running os8 I input-ed init 0 boot cdrom from the OK
prompt for an os9 upgrade. 1/2 way done install quits. (new feature?)
now system boots for about 20 seconds & then reboots cycling.
I am not able to stop the process so that I can get an >OK prompt
for another attempt.
question.
How to boot from the install CD and prevent system from
'cycling' infinitely < arrgh!>

press the stop key and the a key at the same time. the sun will stop at the ok prompt.

How to boot from rescue disk

Hi,
I am running Macbook Pro, snow leopard 10.6.8
My resuce disk is based on 10.6.4
I tried to boot from rescue disk to repair the main disk.
I failed to boot from the rescue disk as my rescue disk (from CD) is not being recognized. I tried multiple options such as holding down "C", "c", "option" key etc while the system is restarting. Only the main disk was being shown as the bootable option (while holding down the option key when restarting) but not the rescue disk.
I verified that my rescue disk is good. Infact, I could boot a Lion MacBookPro using my resue disk.
Any inputs are appreciated.
Thanks
gb

It was 10.6.4 (Snow Leopard). It was the same as the rescue disk version.
thanks
gb

How to Boot from Leopard Upgrade disk??

Similar Messages

Maybe you are looking for