How to boot from Panther install disk?

Hi,
May be a stupid question but I want to boot to my Panther install disk1 to repair my hard disk. I start the computer with the cd in the drive but it never boots from the cd. How do I do it?
Thanks,
Dave

Dave,
Insert the Panther Install disc, then restart the computer while holding the C key.
You may also want to read Using Disk Utility and fsck to resolve startup issues or perform disk maintenance.
;~)

Similar Messages

My imac wont boot from the install disk

My IMAC will not boot from the install disk.

Hello, your installation disk is running under OSX??? If no the media has a problem!!!
1. Restart your mac and hold the alt (option key) to select media to install.
2. Restart you mac and hold the "c" key to boot.
an other solution is to make a partition on the hard drive and put a restore image of the Mac os X Installation dvd inside it then Restart your mac nad hold the "option" key and you will see the partition with mac os x installation and you can make a new installation from there.

Mac Pro gets kernel panic while trying to boot from Leopard install disk

Hi all,
I'm finally getting around to installing leopard on my 2006 Mac Pro. It has the x1900 video card from Apple and all firmware is up to date. The install disk upgraded my Macbook with no problems.
When booting I get the wipe to grey, kernel panic, "You must restart your Mac" screen. Any suggestions?
BTW the Leopard install disk installs OSX 10.5.0
Thanks
Pax

I finally found that the mac pro needs installer 10.5.2 or it will do the kernel panic thing. I did find a way around this though.
1) I took an external drive hooked to my macbook and installed 10.5 on it. Then booted from it and did all the updates, installed all my necessary software (ilife 08, parallels, and so on).
2) I then made sure my Mac pro's drive was currently backed up and then booted up from the backup and then used Carbon Copy Cloner to clone the new OS 10.5.4 Leopard disk onto my Mac Pro boot drive.
3) After that I used migration assistant to transfer all my user settings and such.
It all worked great and I now have Leopard on my Mac Pro.
Just thought I'd let everyone know how I got around it.
Pax

MacBook Pro 2010 hangs when booting from Windows install disk

Hi there,
I'm trying to install Windows 7 via Bootcamp. I've used Bootcamp before so familiar I'm with how it should work. I have a USB CD drive, which I've used on other machines OK, and an official Windows Install Disk.
After Bootcamp finishes copying over all it's drivers etc to my external USB drive, it reboots. However, whenever I try to boot from a disk it always just hangs on the Apple logo (no spinning cog/wheel). This happens whenever the Bootcamp installer performs a reboot and/or when I hold down ALT on startup and select the boot CD.
I can still boot in to mac partition. Could this be a problem with the EFI? Any help with identifying this problem or how get the information to fix this problem would be much appreciated
Thanks.

Try resetting PRAM…
http://docs.info.apple.com/article.html?artnum=2238

Cannot boot from OSX install disk

I need to run disk utility to repair my boot drive.
I am attempting to startup from my OSX install disk. However, I can't seem to get my machine to do this.
My computer recognizes my install disk when it's in my superdrive. It mounts on the desktop and I can read from it.
However, when i go into system preferences>startup disk, OSX does not show my mounted OSX install disk listed as an option. Also, when I hold down C on startup, my machine ignores the command. And when I hold down the Option key on startup, the only startup option shown is my boot drive, not my OSX install disk.
I've tried zapping my p-ram. I've tried booting up in safe mode and then re-trying the above.
I don't know what else I can do, short of typing in scary UNIX command lines.
I'm going completely mental here. Please help me, somebody.
If it makes any difference, I've got gobs of apps installed, notably Adobe CS3, Final Cut Studio, Firefox, MS Office 2004.

Not that this solves the booting problem, but I recommend installing AppleJack, which is free (and does run on Intel). This provides easy commands for doing a disk check in single user mode (it's the same in the end as typing the Unix commands but much easier to use), and it's much faster than booting from the CD (even if you can).
Having installed it, restart holding command-S: after a lot of text you will get the line 'Type Applejack at the prompt' - you simply do this and then it's just a question of typing 'd' to check the disk and so on. (Incidentally do not run it from the Terminal when booted normally: you must use it only in single-user mode.)

Video Ram failed, won't boot from Leopard Install Disk

Hello,
Recently, I ran the techtools software, and got a report that my video ram had failed. It was suggested that I attempt to reinstall OSX. I put in the Leopard install disk, click the install or setup button or whatever it is, click to restart. When it restarts, a gray screen comes up, but the computer never actually boots up, from either the DVD or my hard disk.
Any suggestions?

Welcome to the Apple Discussions!
Since your MacBook is still very new, you shouldn't have an problem with the DVD. If I were you, I'd call AppleCare Support and have someone walk you through re-installing Mac OS X. However, I really doubt this will help resolve what seems to be a hardware failure on your MacBook. Hopefully the folks at AppleCare Support can help figure out if you need to send your MacBook in for repairs.
-Doug

Can I boot from tiger install disk without wiping my hard drive?

I have an old mac install disk with tiger on it and I want to be able to boot from it. Can I do that without damaging my hard drive?

You can boot from it, but if you continue through without stopping eventually it will try to install Tiger. However, if you want to install Tiger on a USB flash drive or HDD, then when you arrive at the screen for selecting a Target device, be sure to select the USB device before clicking on the Install button.
If the USB device has not been properly partitioned and formatted already, then be sure you do this:
Clean Install of OS X
     1. Boot the computer using the Tiger Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the USB drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
If you wish you can download any updates using Software Update preference panel.

How to boot from a repairing disk error? Windows 8.1

Hello,
I installed the iCloud yesterday for my iPhone 5s, and then a box popped up saying to restart and so I clicked OK as you do as i needed
to restart my PC anyway. So it restarted and went into Automatic Repair and now every time i start my computer it goes into this and then goes to a black screen, i need my computer for school and exams so need this sorted pretty quickly. i have read that it
is a common problem, but i can't seem to get F8 up the only think i can do is go into my motherboard settings and from there i can boot it form my SSD where the boot file is but this just tries to load it and goes to Automatic Repair. i can't get Microsoft
to help me as i need product identification number which can only be found when you have booted up the computer. Idiots !!!! Please can some one find me a step-by-step guide as I need this sorted quickly as i am in the middle of my exams. Thank you. Zach.

Hi,
Apologize for the late reply.
Do we have a Windows repair disk available? If yes, we may consider to take a system restore from there. We could contact the manufacturer to get a repair disk.
a) After you boot your computer using Windows DVD or System Repair Disc, a black screen appears with gray text "Press any key to boot from CD or DVD". Press any key.
b) Select the correct time and Keyboard type.
c) Click Repair your computer in the lower left corner.
d) Select Troubleshoot from Choose an option screen.
e) Click Advanced options in Troubleshoot screen.
f) Select System Restore.
======
Or take a try to do a selective boot up with bios:
get cmd to open and check
bootrec /fixMBR
bootrec /Fixboot
bootrec /rebuildBCD
and also
chkdsk /r c:
chkdsk /r d:
chkdsk /r e:
chkdsk /r f:
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Is booting from Tiger install disk possible to repair disk?

I have leopard 10.5.3 installed and updated, but I don't have the install disks on me, just the Tiger install disks. Can I boot from the Tiger install disks and repair the HD?

repair disk - yes,
repair permissions - no.
you can also repair disk without using an install DVD at all.
boot into single user mode by holding command+s at the chime on restart. at the prompt enter
/sbin/fsck -fy
that's the command to run "repair disk". when it's done type
reboot
to restart normally.

Solaris x86: How to boot from Veritas mirror disk?

Hello team,
We are using trailware Veritas Storage Foundation (VxVM) on Solaris 10 x86 system and need help in booting from alternative boot disk(Mirror disk).
Steps did :
1. Mirrored the root disk group using veritas volume manager command *"vxrootmir"*
2. Updated the bootpath with mirror disk path in /boot/solaris/bootenv.rc
Updated the EEPROM information:
# bootadm update-archive -R /a
3. Edited the grub configuration file, /boot/grub/menu.lst
Created the following entry similar to primary disk entry to allow the root disk mirror to be booted
title Oracle Solaris 10 8/11 s10x_u10wos_17b X86 <VxVM: Alternate Boot Disk>
findroot (rootfs0,0,a)
kernel /platform/i86pc/multiboot
module /platform/i86pc/boot_archive
4. reboot -- -r
At the time of boot, selected the newly added entry from the grub list and got the following error,
*"Reboot and select proper boot device or insert boot media in selected device and press a key".*
I am unable to move further from here, is this because of the veritas trial version we are using ?
Please help in resolving this issue and also explain the step by step process of booting from alternative boot disk on a x86 machine.
Let me know if you find anything inappropriate. Looking forward for your replies.
Thanks in advance.

Hi--
I have not seen this message before but a quick google search says that is pretty common and is related to the system
trying to boot from a different device (not the one you intended). Can you check your BIOS settings and possibly remove
devices from the boot order setting... Otherwise, I would suggest running installgrub on the disk that you are trying to boot
from.
I'm curious why you are trying Veritas. Is there a Veritas feature that you need? You might consider trying ZFS if you haven't
already. Its very simple to set up and use.
Thanks, Cindy

Is there any way to browse a USB disk while booted from OSX install disk?

My hard drive died on me the other day (the mac partition anyway) and I'm trying to use a data recovery program to get my data back. I have the application on my USB key, and I assumed I'd then be able to use the OS X installer disk to boot up and then run this program from the USB drive but the installer doesn't let me browse folders or quit... Is there any way to do this? I don't have another mac to firewire or anything so it's either this or order a recovery program on a bootable disk, which I really don't want to do as I need this done fast... Any suggestions?

Your utility for data recovery usually should have come with a Mac bootable DVD with its own application on it. If it didn't, contact them for a disc that will boot your Mac with the utility on it. Your other option is to get a Firewire hard drive, partition it, and install the operating system there on one partition large enough for the operating system, while leaving the other partition large enough to recover the entire unbootable hard drive.
Partitioning is described here, and will WIPE your entire hard drive:
http://docs.info.apple.com/article.html?artnum=61301

How to boot from Lion without disk

Iv'e done this before but seem to have problems remembering which keys to holddown during restart to get to disk utilities Comand R?

Cmd-R doesn't always work. If not, hold the Option key while starting. That will show the Startup Manager, where you can select from all available startup sources, including the Recovery HD:

How to Boot from Leopard Upgrade disk??

I bought a Leopard upgrade disk last year for my iMac. Today I am having computer troubles. But there seems to be no diagnostic programs on the Leopard upgrade disk, nor does it seem to be a bootable disk. What should I do next?
The problem with the computer is, everywhere I click I get the rainbow colored spinny wheel. When I want to open an app, I get the spinny wheel. When I want to scroll in a window, I get the spinny wheel. It may take several minutes before the spinny wheel goes away, and the command carries out. Illustrator flat out refuses to launch, as well.

That's different. It's not an upgrade disk. It should be bootable. Insert the disk in your Mac and reboot while holding down the 'c' key. What OS are you running? What model iMac? Give some some info please. It will not have hardware diagnostics on it. It will have Disk Utility so you can run Repair Disk.

Can't boot G5 even from OS install disk. Help?

I've trolled the message boards 25 pages deep and searched all the "Can't boot my G5" threads and still haven't found anyone describing what my machine is doing so thought I'd start a new thread in the hopes someone can help me out.
Ok I have a G5 dual processor machine. (Power PC chip, not Intel) Things went bad when I tried to do an Archive and Install of Leopard (OS 10.5) The install looked as normal until I got to one minute left on the install. At that point the install never progressed. I thought maybe it was doing some behind the scenes processing and decided to leave it over night. The next day my machine was still hung on that One minute left. So obviously it was a failure. Of course now the problem is I have an install that never completed of the OS and so that partition is, I assume, unbootable. Wiped away the Tiger OS and did a 99% install of Leopard. So I had to shut down by holding the power button.
I think to myself, "No worries I can just boot from my 2nd partition holding down the Option key to select it on the boot up screen". I always keep a partition with an OS on it for times like these. So I reboot, hold option key, select my other partition, things look OK. I get the grey screen with the Apple logo and I get the wheel animation turning. (Not beachball of death but the typical circular, almost sun ray configuration thing) At this point, usually the screen will go black for a moment before the desktop loads. However, in my case once the screen goes black after the load screen, it stays black. Now let me say the monitor does NOT turn off. There is a definite difference when I manually turn the monitor off. When off it's truly black. But this is like a power on black, not true black. (If you need me to explain this better feel free to ask me to clarify)
So the untouched, pristine Tiger partition boot is a No Go. I figured I'd then give up on trying to put Leopard on my desktop machine (I use it on my laptop) and reinstall the original OS and system software from the system disk that came with my G5. I boot machine holding down eject button, place the disk in, close the drive door and shut down again by holding power button. Reboot holding C key and the same routine happens with booting from the disk. Gray Apple logo screen, sun ray circle moving, screen goes black on the attempted transition to desktop .. but stays black. I also tried booting with my Disk Warrior disk to no avail. Same thing happens. (Also tried booting from disks by selecting them manually from booting with Option key down) At first I wondered if it was a monitor issue. That maybe my desktop was up but there was an issue with the signal being passed to the monitor on the resolution jump. Thought perhaps hitting the Eject key on the keyboard when I had attempted to boot from the partition (not from disk on this test) would tell me if it was a monitor issue. If it was a monitor issue, the disk tray should open. But alas, no.
So since I cannot boot normally from any partition or disk I decided to boot into single-user mode.
I did the fsck -fy thing and it told me everything was ok. I had also previously installed applejack and I ran that and short of correcting a few permissions and dumping some unneeded caches it came back with a system OK.
At my wits end I booted into target disk mode and ran Disk Warrior on both the original half installed OS partition and the back up emergency boot up partition from my laptop. Again, everything OK. Hoped against hope that I could actually install an OS onto my G5 from my laptop but I was only given the option of being able to do it from my laptop with the Leopard disk and it would only allow me to do it if I used Disk Utility to completely format that drive first. No, thanks.
Re-attempt to boot G5. Failure. So now I turn to hardware. Disconnected everything beside the keyboard and mouse. Try again. Fail. Pulled a couple sticks of Crucial memory out of the machine and left the stock RAM. No dice. Pressed the small power unit reset button under the RAM slots. No change. Zapped the PRAM. Still nothing. Try to boot in Safe mode holding down shift key. Doesn't work.
It seems to me if I can't even get the machine to boot from the Install disk that there is something going on that is much more major than software issues.
Bad motherboard? Any ideas? Because I'm all out of ideas.

Brother, Sound74, I thought I was the only one pulling the hair out of my chest one by one the past two days. Your situation is very similar to mine, and I'm just as clueless as you are. I started getting kernel panic screens, then nothing on boot, until finally I brought it to the local genius bar. They ran all the usual software/hardware tests, updated Tiger to 10.4.11, recommended I buy Leopard and do an erase-install. My computer, of course, was working absolutely fine by this point. I bought Leopard, came home, backed everything up, then tried to install the new OS. Like in your case, it just up and quit half-way through. Screen went black and a "No DVI Signal" message came on my display (it does this when I turn it on without first turning on the computer).
So I thought, well, maybe it takes a really long time to erase-install, and the monitor is just waiting for things to kick back in. I've always upgrade-installed before, so I couldn't tell if this was normal or not. But about half an hour later, my fans kicked in so fast I thought I had a P-51 Mustang taking off in my studio. I waited a bit more and finally force-shut-down my system. Not knowing what to expect, I nervously tried to re-boot.
Nothing. Zip. I can't safe boot, I can't boot from the installer disc, etc. The only thing I can do is the option-key thing whereby you choose the startup disc. And of course, it only gives the Leopard install disc as an option, because now the entire HD has been erased! But when I choose the Leopard disc, of course it doesn't work.
So I have a nice $3000 paperweight sitting in my studio. I guess I'll have to bring it back to the Mac store, where if it costs more than $300 to fix, I'm going to say screw it and put that dough toward a new iMac.
Sorry I couldn't provide any helpful info, but I just wanted you to know you're not alone in suffering the slings and arrows of outrageous technology.
Keep me posted on any solutions you discover, and I'll do the same.
Noochy1
PS My applecare expired a month ago! AAAAARRRRGGGHHHH!!! **** Murphy and his stupid laws.

Leopard lost my external HD, how to boot from Tiger

When I upgraded (?) to Panther, it wanted to do a backup to my external HD, but it was going to be to large, so I told it not to. The next day when I started up, I typed in the password to my external HD and got a window saying Device not found. I have been following the discussions af many others with the same problem, so I'm getting experimental
I would like to boot from my Tiger disk, but when I insert it in the DVD drive and choose it in startup disk, it restarts, but wants to install. What I am trying to do is to boot from my Tiger disk, turn off password protection for the external, then go back to Leopard, hopefully to a useable external again.
How do I boot from an install disk so I can get to my dock and Finder?

David Tinker wrote:
When I upgraded (?) to Panther, it wanted to do a backup to my external HD, but it was going to be to large, so I told it not to. The next day when I started up, I typed in the password to my external HD and got a window saying Device not found. I have been following the discussions af many others with the same problem, so I'm getting experimental
I would like to boot from my Tiger disk, but when I insert it in the DVD drive and choose it in startup disk, it restarts, but wants to install. What I am trying to do is to boot from my Tiger disk, turn off password protection for the external, then go back to Leopard, hopefully to a useable external again.
How do I boot from an install disk so I can get to my dock and Finder?
You have the right idea. It would be easier if you had another computer with Tiger.
Try this. Boot into the Tiger CD by holding down the "C" key but do not install anything, In the Utilities menu you should have an option to log in as a single user in the terminal mode.
From there you can access the external HD and turn off the password. You will need the instructions how to do this in a terminal from the HD manufacturer or someone else on these boards who had done it before.

How to boot from Panther install disk?

Similar Messages

Maybe you are looking for