How to boot from second hard drive in Ultra Bay

Hi all!
I recently installed a SSD drive as my primary disk and mounted my old hard drive in the Ultrabay. It still has all its original partitions, which are:
Windows "System Drive"
Windows OS
Ubuntu
Windows Programs
General Data
I can access 1., 2., and 5. from within my new Win7 install on the SSD.
My SSD drive is fully encrypted with TrueCrypt.
Is there any way I can boot from the HDD in the Ultrabay? I still want to access some of the old data on the system drive.
Ideally, there would also be a way to keep the Ubuntu partition and boot it when required. Any chance of making that happen?
TIA
Matt

Hit F12 to pull up the boot menu when you turn the machine on. Select the drive in the Ultrabay. Beware that the drive you boot off of will become the C: drive until you boot off the other drive again. One thing you should do if you haven't already done it is put the stock drive back in the main drive bay, boot into Windows, and burn a recovery disc set. You may need this in the future and it is a good thing to have should you decide to sell the system later since you sill be able to restore it to factory condidtion.
If you just need to access the other partiton all you need to do is right click Computer in Windows Explorer, select Manage, click Disk Management, and assign the partition a drive letter. I would recommend just burning the recovery disc set and wiping out the stock drive so that you can use it for storage.

Similar Messages

Can't Boot from Second Hard Drive

I put a second SSD hard drive into the bay for a second hard drive but I'm unable to boot from it even after making it the primary drive in the computer settings.
Both hard drive are running Windows 8 if that makes a difference.
Any ideas?

Do you have an Intel version of OS X installed on the external drive and did you partition the external drive using the GUID partition scheme? If not then that's your problem. Also, depending upon which model MBP you have you may require a later version of OS X. According to my information the C2D 17" MBP requires at least 10.4.8 (the build that came on the OS X Installer discs that came with the computer.) 10.4.6 will not boot that model.

Booting from second hard drive

I have a T510 (4349-2PU) on which I would like to install a second hard drive using the ultrabay adapter. The primary purpose of this would be to run an alternative OS. I wonder if someone could please confirm whether or not this is likely to work, and if I would need to make any changes to the Bios settings? Also, would it matter which drive has the boot manager installed?
Thanks for any advice.

they would both need boot manager installed you would need to set the one you want to boot to first in the BIOs if you want the ultrabay HDD to boot it has to be listed first in the boot order
correction: from andyp Install the OS on the "second" drive with it in the primary slot - swap it to the bay, insert the original drive as primary and use the F12 function at boot. No need for a boot manager - easy peasy.
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Boot from second hard drive with ZFS in Solaris 10 x86

Hi,
The usual menu.lst to boot Solaris10 x86 with a boot environment that contains a ZFS boot loader is this one
title Solaris 10 5/08 s10x_nbu6wos_nightly X86
findroot (pool_rpool,0,a)
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
module /platform/i86pc/boot_archive
title Solaris failsafe
findroot (pool_rpool,0,a)
kernel /boot/multiboot kernel/unix -s    -B console=ttyb
module /boot/x86.miniroot-safeI understand that to add an alternate boot disk, I have to play with installgrub and then attach it in the pool.
But my question is : Is there a way to boot from my alternate hard disk by adding a new entry in menu.lst or is the only
way is to modify the BIOS parameter?
Thanks for your help,
Groucho_fr

Groucho_fr wrote:
Thanks for your answer Alan,
But ok, I imagineI can add a grub entry. But what I want to know is what is the exact way to boot from an alternate hard disk on Solaris 10u6
x86.AFAIK there are only two ways to do this. Select the disks via BIOS which becomes a royal PITA in a short amount of time or play with a boot manager such as GRUB until you get the syntax right.
Personally I put all OS's on the primary disks if possible to avoid these situations and if I have others to play with then you can easily mount them in or set them up as D: drive etc...
The only exception would be in an enterprise setting where you need to do things such as mirroring but then again in those situations it's only one OS per machine anyways so it's much easier.
So at the end, I am not sure what I have to configure and what is the procedure to boot from my alternate boot diskTry the grub homepage for the grub manual and hopefully for a mailing list or try a search engine.
http://docs.sun.com/app/docs/doc/819-5461/zfsboot-1?a=view
has an example to follow of using -B.
And moreover, the installgrub does not working for me :
root@mac1 # zpool status
pool: rpool
state: ONLINE
scrub: resilver completed after 0h2m with 0 errors on Thu Mar 26 10:56:24 2009
config:
NAME          STATE     READ WRITE CKSUM
rpool         ONLINE       0     0     0
mirror      ONLINE       0     0     0
c5t0d0s0 ONLINE       0     0     0
c5t4d0s0 ONLINE       0     0     0
errors: No known data errors
root@mac1 # installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c5t4d0s0
cannot open/stat device /dev/rdsk/c5t4d0s2
You shouldn't need to do an installgrub if you installed Solaris. Try c5t4d0s0 not s2.
alan

W540 - boot from second hard drive?

Morning,
I've recently got an ultrabay adapter and wanted to know if I could run two separate OSs, one from each hard disc.
Effectively, I would like to have one version of windows on the internal HDD for general day to day stuff and one as a programming environment and be able to select which to boot from at start up.
I know I could just use a VM, but some of this stuff (Siemens PCS7) can put quite a strain on the system and I'd rather not have that overhead.
Thanks,
Solved!
Go to Solution.

Hello.
To run a dual OS setup, you have to turn off Secure Boot and set your boot options to both UEFI and Legacy.
I run a dual boot setup Win8.1/Fedora on both my T440's and though it is possible to set it up with UEFI boot
I just skip that hassle and run both OS in legacy mode. If you're planning on dual-booting different Windows
editions, that even applies more.
Further info here: Dual Booting Windows 7 with Windows 8 Pre-Installed UEFI
In BIOS go to Security - Secure Boot - Set to Disabled.
Then go to Startup - Set UEFI/Legacy Boot to Both.
A little further down, set Boot device list F12 Option to Enabled and then you can press F12 during Post
to select which drive to boot from.
Cheers!
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Booting from external hard drive on intel-based MacBook Pro

Good day everyone. I know similar questions were raised in this community, but I still have some questions.
I have MacBook Pro(late 2011) with OS X 10.7.5 and external hard drive with Ubuntu 13.04, from wich i can boot succefully on my PC. But MacBook Pro will not boot from my external drive, no matter which key/combination i use during restart.
After googling I found some answers to my initial question, how to boot from external hard drive
https://discussions.apple.com/thread/1852633?start=0&tstart=0
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-boot-from-exte rnal-firewire-or-usb-drive.html
http://support.apple.com/kb/ht1948
As I understand I need to format my external hard drive into GUID partition type and this will be enough to be able to boot from it on my mac?
With this new partition type, will I be able to install ubuntu again on my external drive?
Does GUID partition type supports NTFS, ext4 and FAT32, linux swap?(I use ntfs for big files, ext4 as partition for ubuntu and fat32, because i use windows, linux and osx)
Will I be able to boot from my pc from my external drive with this new partition type?
What are downsides, if any, to GPT?
here is info on my e-drive

LowLuster wrote:
The only OS that will boot from an external drive is Mac OS X or maybe Linux. For OS X to be installed on any drive it need to be formatted Mac OS Extended and have GUID partition table.
As for Linux I'm not that familiar with it but again for a Mac to boot it need an EFI partition on the drive and I don't think that is possible with NTFS or FAT32 let alone the native Linux format.
Went to wiki to learn more on efi but found artice on uefi.
Operating system loaders are a class of the UEFI applications. As such, they are stored as files on a file system that can be accessed by the firmware, called EFI System partition (ESP). Supported file systems include FAT32, FAT16 and FAT12, and supported partition table scheme is GPT only. UEFI does not rely on a boot sector, although ESP provides space for it as part of the backwards compatibility.[26]
Here is FAQ on official uefi website.
Can UEFI Secure Boot be adopted and implemented by a variety of operating systems?
UEFI specifications are platform-independent, supporting multiple platforms and architectures. In addition, UEFI specifications are designed to promote cross-functionality, as well as to support broad adoption across multiple operating systems, including Windows as well as Linux-based operating systems. The specifications are robust and can potentially complement—or even advance—other distributions, such as Linux-based distributions.
And here is wiki article on GPT expaining OS support.
It is obvious both uefi and GPT are ok with Linux and file systems such as FAT32, ext4 and NTFS.
I guess there is no much difference(or is that the same thing?) between uefi and efi used in Macs.
In your answer to Stark Industries you said that mac can boot linux from external hard drive, well this is not the info i got of official website and it is still my question, because your answer is very inconclusive and your info is partially incorrect

Set Bios to Boot from 2nd Hard Drive

Hello HP forum!
I have a situation that I am afraid may be hardware related, so this is my last attempt for help before I let it go.
In this laptop, I have two hard drive slots with two hard drives. The second hard drive was used as an HP backup/restore drive as shipped from the factory.
I would like to format and install an OS onto the 2nd drive for easy-peesy dual booting. (This is a work computer, so easy + time-efficient + low-risk is optimal). I have actually done this already, but the BIOS does not seem to detect two bootable hard drives. In the BIOS (pretty sure not EFI) boot list, it simply shows the option to boot from "Notebook Hard Drive", which boots from the 1st drive.
In my 1st Drive's Windows 7, I can read the contents of the 2nd disk, so it is definitely functional. Also, replacing the 1st drive with the 2nd drive, I can successfully boot from it, so it is bootable. This seems to imply that my hardware understands that there are two drives, but the BIOS does not recognize that port to be a bootable option, but only a storage option... I guess?
My question is, then, how can I set up my computer to give me the option to boot from either drive? Is it even possible on this hardware?
Thanks
Rex

Did you make sure to update your bios as that could be something that might require a bios update? Also if you can't see or locate that second drive in the BIOS you might not have the option to boot from the second drive? Does the bios also give you the option to boot from the cd drive? Your asking us to see a boot bios screen and unless some has your same make/model no everyone will be able to confirm or see what your asking so unless you can do more looking at all your bios options you might not have the option to boot from the second drive port.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Why won't my iMac 27" boot from external hard drive?

I have a new 27in Intel i5 dual core 3.6GHz iMac. It works wonderfully.
My question is this. I have a Pleides Ice Cube external hard drive with a USB 2.0/Firewire enclosure with a 500GB hard drive. I used diskutility to format the hard drive as a GUID Partition Table. I then used SuperDuper to clone the iMac OS 10.6.7 and Apps over to it.
I can select the external drive in System Preferences/Startup Disk to boot from, but when booting the iMac gets as far as the white screen then just stops loading.
I have tried both the USB connection and the Firewire connection (with a Firewire 800 to 400 cable).
I have run Disk Utility and repaired the disk and the preferences.
I have used Disk Warrior to rebuild the directory as well, but the iMac will not boot from the drive.
It does boot from the original DVD's and its own hard drive.
My old 24" iMac had no trouble booting from this hard drive or any of the others I have collected over the years, so I am reluctant to think it is the external drive. It is something to do with this particular processor Snow Leopard and external drives.

It sounds like something in the SuperDuper clone might not have copied well. To get the full answer on that I would check with Apple or SuperDuper to see if they support each other.
As a quick test, if you restart and immediately press and hold "option" on your keyboard do you see your external HD as an option to boot from? If so, click it and see if the boot runs any differently, but if you don't see it at all that could show that the problem is more deep rooted.
Personally, if looking in to either of those didn't give me any other info to go on, I would reformat and start the clone again. BTW, do you know for sure GUID Partition is the format you'd want to do this on? Generally macs use "Mac OS Extended" and some external HDs can use "FAT32" (if you want them to work well with Windows)
Hope that gives a little direction
Alex

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

HP Pavilion 500-210 QE Can't boot from any hard drive.

Good Evening. As you can see from the subject, my computer just can't boot from any hard drive that I put on it. I tried swapping the power supply, the SATA cable, resetting the BIOS, enabling legacy boot, changing from AHCI to IDE and RAID...
When I get to the BIOS setup, I can see the hard drive and its specifications, but it just won't boot or show up when I'm trying to install a new OS. I'm not an expert, but I think the problem might be in the motherboard SATA ports, but I'm not sure. Just to make sure, I did try another hard drive and it didn't work aswell.
I was also thinking about buying an external hard drive and instaling my OS on that, but I don't even know if that's possible and I would really like to have my computer working again.
Thank you for your attention!
This question was solved.
View Solution.

What is the installed operating system?
Did you make a recovery disk set?
Did you happen to make a Windows 8.1 startup disk or USB recovery thumbdrive?
Have you tested the hard disk?
Press the power button and then immediately tap the Esc key. In the Startup menu, choose F2 for Diagnostics. In the HP Basic System Diagnostics menu choose hard disk. Run the test and post the results here.
The issue you are facing has nothing to do with the SATA ports. It is a configuration issue. Your PC is a modern one and its BIOS (UEFI) is far more advanced than what you may have seen before.
If you want to install a different operating system then you will have to make a few changes in the BIOS configuration. Secure Boot is turned on by default for Windows 8 and Windows 8.1. If you try installing a different OS without turning this off then your system won't boot up. You may be running into this if you are trying to install another operating system.
The image below is what will be seen in the BIOS of your PC in the security tab --> . In the secure boot configuration options do not clear the secure boot keys! Those keys are your operating system license activation keys.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Dual boot arch from second hard drive [SOLVED]

I have two sata hard drives connected. Hard drive 0 has my working updated version of arch.
I'm trying to boot off the second hard drive that has an older installation of arch. I have added this to my menu.lst of my first hard drive:
# (2) Arch Linux 2.6.31
title Arch Linux 2.6.31
root (hd1,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/29523114-ab52-4a9b-b93f-e2da915c0dc1 ro vga=773
initrd /kernel26.img
I have also tried using /dev/sdb1 on the kernel line with the same results. The uuid is correct I am able to obtain that from /dev/disk/by-uuid/
this is definately where the vmlinuz26 file resides for that hard drive. I can mount it and see it.
But when I choose this option, it tries to boot but then I get:
kinit: init not found!
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init not tainted 2.6.31-ARCH #1
What do I need to change? Do I need to add something to that initrd line? Thanks.
Last edited by kekules_dream (2010-01-10 21:43:31)

I had to change the uuid to that of the root partition on sdb (the second hard drive) even though I had a /boot partition on it (sdb1). It is now working.
# (2) Arch Linux 2.6.31
title Arch Linux 2.6.31
root (hd1,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/4a5827bc-6ace-4d4d-9ba7-24586e365c8a ro vga=773
initrd /kernel26.img

How to exculde the second hard drive backup from time machine of lion os

My Mac Pro 2010 mid version is using Mac Lion OS, and I have installed three internal hard drives (two 3T hard drives for storage one 2T hard drive for time machine hard drive). When I start to run the time machine to backup the system hard drive, the time machine will include those internal hard drives automatically, and it stop backup and claim time machine is lack of storage space. Of course I know it is not big enough to backup those extra hard drive. However, I just only need to backup the system drive only, but I cannot locate any setting related how to exclude other internal hard drive in time machine. So I still cannot backup my system drive yet.

See:
http://pondini.org/TM/10.html
10. Can I exclude things from Time Machine backups?

Hard drive dead/Boot from external hard drive?

My hard drive failed and I need a new one. For the time being, I'd prefer not to open up my iMac and replace the internal hard drive. I have an external USB hard drive and I cannot install OSX onto this drive (strangely, it takes the first disc but not the second).
Is it possible to boot and run an iMac G5 from an external hard drive? If so, what is required for hardware and what steps need to be taken?
If not, what course of action would you recommend?

It is very easy to boot an iMac from an external drive, but the drive should be a Firewire drive. Get one, then get SuperDuper!, which will enable you to clone your data and system to it. You can then choose the external firewire as your boot drive and operate without any problems.
Apparently, there are ways to boot from a USB drive, but they are complicated and a firewire drive is very straightforward and fast.
Let us know how you make out,

How to tell if second hard drive is going bad

Back in November added second hard drive to my G4 and installed Leopard on it. In last month incredible amount of app crashes, hangs, "force quit," etc. and the occasional kernel panic.
Did an erase and install and now seems like more of the same.
When I run old 10.3 on the original hard drive, life is just fine. To that end, I'm beginning to suspect the hardware. However, when I put the original Apple Hardware Test CD in and tried to use it (never done that before), it said it wouldn't run on this machine.
Is there a Plan B? Is there something wrong with the CD?
Thanks in advance for the help.
j

SMART - look at the bottom of the screen in DU when you click on the drive.
Lepard may be uncovering faulty or marginal memory. Each OS upgrade has put memory to use more so than previously.
Memtest is your best bet there. Or Rember which people like for GUI.
I tended in the past to wipe a drive with zeroes.
If you aren't using Disk Warrior (or TTPro) then you really don't know if your drive has directory or file errors, sadly, 3rd party is pretty much a given and must.
Intech Speedtools is another. Can do a thorough SMART test (45 minutes), test media, scan and reassign bad blocks, and stress a drive.
Disk Warrior manual hardware test will tell you one thing that helps: whether a drive has used spare blocks and how many left, meaning it might be time to zero a drive. Drives tend to fail early if they will, sometimes off the assembly line. Or down the road.
It would be nice if we could run Memtest from Apple Hardware Test. AHT does spot real obvious problems with memory, but sometimes iTunes seems to do a better job.

What kind and how to add a second hard drive to my dv7-6157cl?

I want to add a second hard drive, which can be done on this laptop. What type of hdd would I purchase?
Can I add a solid state drive?
Are there instructions on how to do this on this particular model?
Thank you

I would not use a SSD for a second drive, there is really no benefit to this, an SSD would be much better for the primary hard drive where the OS runs from.
Any standard laptop Sata hard drive will work
You would need a hard drive hardware kit, includes bracket, shield, screws, and data cable.
I would contact HP parts to be sure you get the correct part(s) for your specific model
Here is your service manual which has instructions on how to replace hard drives in that model

How to boot from second hard drive in Ultra Bay

Similar Messages

Maybe you are looking for