How to boot from usb flash drive on Satellite A500-o25

How do you configure boot order on A500-o25 so that it boots from usb drive first.

Hi,
Enter the Bios, pressing F2 on startup, go to the Boot menu and choose Usb drive as the first boot device (you navigate with F5 and F6 keys). Press F10, and ..Save and Exit menu ,, appears, press ok. That's all.
Note, on my satellite A500, I have to connect the Usb flash before to turn computer on, otherwise the usb flash drive doesn't appear in boot menu in Bios
Message was edited by: Jeka-IL

Similar Messages

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

Satellite U400-10j - How to boot from USB flash drive?

Hello,
I have a Toshiba Satellite U400-10j.
I have Ubuntu on my USB flash disk, I now want to boot from it.
I am unable to find the option in the BIOS to boot from the Usb flash drive.
Secondly I have noticed that the laptop also has a internal memory card reader.
Could I load Ubuntu onto it then boot from the memory stick as well?
Your Help will be much appreciated.
Thank you.

I think its not able to boot from an USB stick on this notebook.
The best way is to use a CD. There you can boot from on this notebook and all other notebooks.
In the Internet are a lot of CD versions of Ubuntu and other Linux systems available.
And as Feliks said, its not able to boot from an SD card because this is not listed in the BIOS.

MSI P965 Neo-F (MS-7235) problem booting from USB flash drive

Hi, all!
I was wondering if someone can help me. I am trying to install Windows 7 x64 on my 320GB HDD that is connected to my MSI P965 Neo-F (MS-7235) mobo (The CPU is a Core2Duo 6600 with 6GB of RAM). I created a bootable USB 8GB flash drive using Microsoft's "Windows 7 DVD USB Download Tool" and bootsect.exe (Needed to create a boot sector on the USB drive) from the MS store. I successfully tested the resulting bootable USB drive using freeware MobaLiveCD (Sorry, you'll have to Google "mobalivecd" since this forum doesn't seem to allow external links) running under Windows XP SP3 x86 (32bit). Under MobaLive's QEMU, Windows 7 setup loaded its files and produced an error message basically saying that it could not install Windows 7 x64 under an x86 OS (No surprise there since QEMU is emulating a 32bit processor - The point is that the bootable USB drive I created works).
I then went into my mobo's CMOS and under Advanced BIOS Features -> Boot Sequence -> 1st Boot Device, set the value to "USB-HDD" and rebooted my machine. The USB drive probably was not detected by the mobo under that setting because it proceeded to boot from my HDD which is the 2nd Boot Device. I repeated the same process using each one of the four USB ports in the rear of the mobo (I don't have the optional USB panel that the MSI users manual mentions) to no avail. I also tried setting the 1st Boot Device to "USB-FDD" and repeated the process for each USB port but the mobo still will not boot from the USB drive (It does not recognize it). When I set the 1st Boot Device to "USB-ZIP" and rebooted, the mobo hangs after "Verifying DMI Pool Data ..." which is no surprise since I am not using a USB ZIP drive but a USB flash drive. It appears that under that setting, it recognizes that there is a USB device attached but it is expecting a response (From a USB ZIP drive). I had no idea it would be this frustrating to boot from a USB flash drive! If anyone knows how to make this mobo boot from a USB flash drive, please let me know. Any assistance would be greatly appreciated. Thanks!

Quote from: RemusM on 12-June-14, 17:51:30
The P965 Neo motherboard is 8 years old, so don't expect miracles. .... You need to format the USB stick in the proper way. You may use this utility to do it: hxxp://www.prime-expert.com/flashboot/ Also, it's a good idea to use the first (USB0) connector (controlled by Intel ICH8) for the USB flash drive. Good luck.
Thank You for your fast response, RemusM!
I'm not looking for a miracle. I'm just looking for a mobo that does what it is supposed to do: Allow me to boot from a USB flash drive (I don't think that is too much to ask for even from a board that was made in 2006)!
Thanks for recommending FlashBoot. I see under their "Why FlashBoot" section that it "... does not shift to user the burden of choice between "USB-ZIP" and "USB-HDD" at format time and proper BIOS setup at boot time. ... and every USB disk is formatted in such way that it will work in every environment properly, regardless of current BIOS setting.", so I will give it a try and let you know about the results afterwards.

Cannot boot from USB/dvd-drive on Satellite Pro M10

Hi,
since the internal dvd-drive is broken, an external USB drive is used. Now, I need to reinstall windows on a new harddrive. How can I boot from this external drive? (I do have a Floppy disk drive, but I cannot find the right drivers)
Thanks,
Luc

Hi,
you dont need any drivers for that USB-drive because the USB-floppy is a integrated peripheral of your computer. That means, everytime you connect the floppy to your machine, the computer sets that floppy like a internal hardwired floppy and thats the reason you wont need any drivers.
Its already installed when you plug it in.
Cheers

Problems booting from USB flash drive w/ SL

I used disk utility to create a bootable USB stick and restored the SL DVD onto it, but for some reason when I try to boot from the USB it doesn't work. When I reboot I hold down 'Option' and I choose the USB drive, but then the system just sits there with the white screen with the Apple logo on it.
Any ideas?
Using a 2010 MacbookPro.
David

Did you prep the flash drive properly:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Boot camp install from USB Flash Drive

Hi Folks,
I recently purchased a new Macbook Air. It has 10.8.3.
I used the Boot Camp Assistant to set up the computer for Boot Camp. It went through all the steps: First, it formatted my USB Flash Drive. Next, it copied Windows installer crap from the my ISO to the USB Drive. Next, it downloaded the Apple Drivers and put them on the USB drive. Next, it restarted in order to boot from the USB drive.
This is where I hit a wall. The computer will not bpt from the Flash Drive. It is as if the control panel has set the startup disk to "BOOTCAMP" instead of the flash drive. So when the computer restarts, it just says "No bootable device - insert boot disk and press any key."
How can I get it to boot from the flash drive?
Thanks In Advance
Andy
Corrected the error message to exact phrase.

Hmmm... interesting... My sites I found suggested otherwise. I tried three diferent brands of jump drives and none of them actually booted the Macbook Air. The Boot Camp Assistant used them all just fine, but booting was the issue. Glad you got it to work. Would you mind posting what brand you used so other reading this thread in the future could learn?
Also, were you just using the BCA or, did you do some other process to make it bootable first? Since the BCA formats the drive, I would think any process done ahead of time would be thwarted (as mine were).
Thanks!

NB100 - How can I reinstall OS from USB flash drive

My TOSHIBA NB 100 notebook does not have CD-DVD drive.
OS is Windows XP Home SP2.
OS is not booting.
Notebook won't start at all so I cannot run any sort of test when i turn it on.
The we apologize screen come on it says run safe mode, safe mode networking, safe mode comand prompt or start windows normally. But no matter which I chose it won't start it only goes to Windows and seems like its starting but then shows the blue Windows screen & stays there.
So I want to reload Windows from my USB flash drive.
The BIOS boot sequence is HDD - FDD - FD - CD - USB Memory.
What are the steps for loading Windows from USB flash drive?
If this does not work then I want to connect another laptop with Windows CD in its CD-DVD drive to the Notebook.
Will this work? Will the Notebook use the Windows CD in the laptop drive to load the OS?
How to do this connection?

Hi
Usually you would need an external USB CD/DVD drive in order to boot from the Windows XP disk or Toshiba recovery disk.
But there is a method which allows you to install the Win XP using 2GB USB flash drive.
This is possible because the BIOS of NB100 support the booting from USB memory stick.
Pease check this internet page:
+Installing Windows XP Using A USB Flash Drive+
http://www.pctipsbox.com/installing-windows-xp-using-a-usb-flash-drive/
Hope it could be helpful.

How to create bootable iso file from usb flash drive to install windows 7 on macbook early 2008

how to create bootable usb flash drive from iso file to install windows 7 on macbook early 2008

I would like to install windows on my mac because I am in engineering school and there a lot of programs I'd like to have on my computer that only run on windows. And yes I'd like to use bootcamp and I know there must be a way to install off a flash drive. Do you know of a way?

Booting from a flash drive

So I have a G4 that meets all the requirements for 10.5. I am currently running 10.4.11. I have a copy of 10.5 which is on a flash drive. I looked into it and followed the instructions on how to load from a flash drive. Reformatted to allow journaling and used disc utility to put the 10.5 installer on there bur when I hold option to try and boot from the drive the only possible drive to boot from is my internal hd. The flash drive doesn't come up as an option. Any ideas why?

Why rare when I can do it! All you have to do is type in open firmware the following:
boot ud:3,\\:tbxi or if you just have one USB device, type: boot ud:,\\:tbxi.
Works everytime, also works for flash drives and external optical drives hooked up to USB..
Only drawback: It won't appear as a start up disk under system preferences, I am trying to figure out how to hack it to make it recognize it. USB 2.0 booting on PowerPC was introduced silently with Tiger 10.4.3(from what I read).
for any powerpc mac, go into open firmware and type: devalias.. scroll until you see "ud"(your device needs to be hooked up for this to work). Then follow the instructions above.. You will be amazed to welcome USB as a new member of your powerpc bootable family.

How to install (using usb flash drive) os x snow leopard on 10.5?

i have a version 10.5 (leopard), but i would like to install snow leopard (10.6). i tried using bootable usb flash drive using the "utility drive". However, it did not quite work as i expected. Does anyone know how to use bootable usb flash drive to install snow leopard on leopard?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Leopard installer DVD. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Insert the USB flash drive.
Restart the computer.
Immediately after the chime press and hold down the "OPTION" key.
Release the key when the boot manager screen appears.
Select the icon of the USB flash drive and click on the arrow button below the icon.
When the installer finishes loading follow the onscreen instructions.

Installing Leopard from USB flash drive

Basically i need to install Leopard from a USB flash drive on my Macbook, but i will sum up my issue: (I'm afraid i'm not a computer-"geek", so bear with me when i try to explain the issue :-))
My macbook hdd recently died on me, so put in a new, clean hdd. I now need to install Leopard on the new hdd from a DMG-file.
So, i have an 8GB USB flash drive and DMG-file of Leopard.
I formatted the USB flash drive to NTFS, and copied the 6+GB DMG-file onto the flash drive.
I tried booting from the flash drive by holding down the option key, but a blank screen shows up with a mouse pointer. There is no Flash drive or install icon to select.
Can anyone tell me, what i'm doing wrong?

Hi Dweepe;
On top of everything else the other posters pointed out, I would suggest that formatting the USB flash drive to NTFS is not doing you any favors either. NTFS is a propriety file system from Microsoft which the Mac can only read with special software install.
My suggestion is to replace your optical drive. A new one can probably be purchased for much less then the problems you are creating for yourself in your attempts to work around replacing it.
Allan

Does KT880 boot from USB Flash Disk?

Does KT880 boot from USB Flash Disk?
Your real experience?

I would like to buy this board.
So that is why I am searching for proved experience.

HOW TO YOU ADD USB FLASH DRIVE TO BOOT OPTION

i HAVE TWO LAPTOPS SAME MODEL NUMBER ONE CRASHED, hp SUPPORT TALKED ME THROUGH F11 TO RECOVER TO FACTORY CONDITION THE LAPTOP STOP AT 100% WITHN1 MINUTE LEFT TO CMPLETE. HP TOLD ME TO ESCAPE AN DO F2 TO CHECK THE HARD DRIVE. THAT WORK IT SHOWED ALL THE CHECKS PASSED. IT TOOK 2 + HOURS SO WHEN i CALLED BACK DIFFERENT PERSON SAID $350 SEND IT THEY WILL FIX. iT'S NOT IN WARRANY SINCE FEB2014 i ONLY PAID $399 FOR IT, CANNOT AFFORD THAT. SO HP TECH SAID USE SECOND PC TO MAKE A FLASH DRIVE . (I MADE CD'S WHEN I FIRST GOT IT BUT THEY DID NOT WORK). SO GOT A FLASH DRIVE WTH 32GIGS (I THOUGHT SHE SAID I NEEDED AT LEAST 20 GIGS) COPIED THE RECOVERY PROGRAM, NOW THE USB WILL NOT OPEN. FROM AN EARLIER WRITTER HE WAS TOLD TO F10 BIOS, ESC LOOP FOR BOOT OPTIONS TO SEE IF USB FLASH DRIVE IS THERE. MY PROBLEM ITS NOT ON MY PC SO HOW DO I ADD IT SO THE USB WILL OPEN.
RIGHT NOW PC IN A LOOP WHEN POWERED ON HP AND TIME COMES UP, LITTLE WHILW A BLOCK WITH HP/DAT/TIME COMES UP AND A CMD ON BOTTOM OF SCREEN, IT GOES BY TOO FAST T CLICK ON IT AND GOES BACK TO HP LOGO. IF I COULD ADD USB FLASH AS AN OPTION IT MIGHT MAKE IT OPEN ANY HELP APPRECIATED.

The flash drive is not going to show up if it is not bootable. To make a bootable Recovery on flash you have to use Recovery Manager just like you do to create cd/dvd Recovery.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to transfer data from USB flash drive to iPad Air?

How do I transfer files and data from a USB flash drive, or from a PC, to an iPad Air?

With a USB flash drive you might, if the drive doesn't require too much power, be able to copy photos and/or videos (if they are under a DCIM directory on the drive and their filenames are exactly 8 characters plus file extension) from it to the iPad's Photos app via the camera connection kit.
What sort of files do you want to copy to your iPad, and have you got an app on your iPad that supports the file type that you want to copy to it ? Everything on your iPad has to be stored within an app, it doesn't have a 'file system' like a computer. Different apps have different ways of copying content to/from them e.g. via the file sharing section on the iPad's Apps tab when connected to your computer's iTunes, via your wifi network, email, dropbox.
Syncing with iTunes : http://support.apple.com/kb/HT1386
Syncing media : http://support.apple.com/kb/HT1351
Syncing photos : http://support.apple.com/kb/HT4236

How to boot from usb flash drive on Satellite A500-o25

Similar Messages

Maybe you are looking for