How to boot OSX from SSD?

Hi,
I have just installed a OWC Data Double in my Macbook Pro 13" 2010.
What I want to do is boot up OSX from the SSD and also to have iPhoto Library on this for fast access.
I would like the HDD for everything else.
What is the best way to get the OSX on the SSD and to leave everything else on the HDD?
I currently have the sparsebundle file on Airport Timecapsule from the regular backups.
Thanks in advance.
Stelios

Topher Kessler California 
   It does not matter what bay to use.
You would think that would be the case,.....installing several shows otherwise.
Clintonfrombirmingham, Eww and others have noted that that isnt the case either.
Love your MacFixit page by the way
kudos

Similar Messages

  • How to boot leopard from cd?

    Hey guys,
    Maybe a silly question, but I need to know how to boot leopard from its insallation dvd, is that possible?
    I would like to boot my mac from dvd, so that i can then use the disk utility to partition my internal hard drive, and i think this is only possible if you dont boot from the hd it self.
    Obviously I am able to boot from the dvd in the way that it starts the leopard installation, but thats not what i need i guess? at least when the installation start, i dont see an option to start disk utility from there?
    so i need to actually boot the system from the dvd, in order to partition "on the fly" without losing the data on my disk.
    I hope someone knows.
    thanks in advance.
    cheers,

    Hi, 
    Boot from the Install disc. Select the Language. Then as soon as the menu bar appears you'll see a Utilities Menu. Select Disk Utility from there.
    cheers
    mrtotes
    EDIT: Level 4s always type faster than me!!!

  • How to upgrade OSX from 10.5.8

    Need to know how to upgrade OSX from 10.5.8 to latest version that will run on my Power Book Pro
    Intel Core 2 Duo

    Purcahse from Apple the Snow Leopard install DVD and install that.
    Then upgrade to the 10.6.8
    From there with the App Store you will be able to upgrade to whatever your MBP will support.
    Allan

  • New hard drive not booting osx from external

    Hi guys, I currently installed a new hard drive into my macbook, and I tried holding down the alt//option key to try and boot osx from my external hard drive ((Connected through USB)) but nothing happens.  My mouse cursor appears, but nothing shows up.  I tried 5 minutes ago to make sure that I was actually able to boot to my external drive from my old hard drive, and it worked perfectly.  But nothing shows up on this end.  Any help or suggestions?
    thanks!

    any one have any insight?

  • How to boot an External SSD from a cd/usb?

    Does anyone know how I can boot an external SSD from a cd/usb? i need to update the firmware on the SSD via a cd/usb before i put it in my mac as the update is listed as a destructive update (meaning it will require re installing a back up). But i am unsure how to do this or if it is even possible on a mac? It would save me the hassle of putting the SSD in my mac updating and removing again if it is critical.
    Any help would be greatly appreciated, many thanks.

    You cannot boot from the CD unless it has the OS on it.  For reasons unrelated to this post I just created a bootable external HDD and installed some software on it from a CD.  I think you have to do the same procedure with your firmware.
    Attach the external SSD to your MBP.
    Power the MBP holding the OPTION key.
    Select the external SSD.
    When the system is ready, insert the CD.
    Do your firmware update.
    Shut down the MBP and swap the drives.
    This is based on the premise that the external HDD has an OS on it.
    As far as the 'destructive update' aspect is concerned, I leave that to Clinton to pursue.  I'm still 'old fashioned' and use only HDDs.  Clinton has the SSD knowledge base.
    Trust me, both Clinton and I are here to help you as much as we possibly can.  When I said,
    "Am I missing something here?", it was not a challenge but a need for more information and/or clarification.  This medium has its limits in communications.
    Ciao.

  • My 27" iMac (2009) won't boot OSX from the internal drive

    Here's a fun problem. After installing Sophos anti-virus and starting a (VERY slow) full scan, a day or two later I found my iMac frozen at the screensaver. It was completely unresponsive so I did a hard reboot, at which point it got as far as starting to boot Lion (apple logo on screen, spinning indicator showing) before stalling indefinitely in that state with the indicator spinning.
    I restarted and booted from the recovery partition, launched disk utility, and discovered that the SMART status of the drive was "failing". The machine would still boot from the recovery partition and my boot camp partition, but I assumed that the disk failing was why the OSX partition wouldn't boot (the recovery partition worked, as did the windows 7 bootcamp partition). I replaced the factory-installed internal HDD with another of the same make, model, and capacity (Seagate 1TB), and performed a restore from the Time Machine backup on my Drobo.
    The result was the same as the original problem - it wouldn't boot, hung with the indicator spinning. Thinking that the Sophos scan was somehow responsible (in-progress when the last TM backup was made) I tried restoring to a backup a few days older, (to the best of my recall from BEFORE I downloaded Sophos) only to have the same result.
    Anyone have any ideas? I made a clean install of Lion (using the recovery partition on my old internal HDD, now connected externally via USB) to an external drive while I was waiting for the replacement hard disk to arrive, and it boots fine from that. I haven't tried a clean install to the internal HDD yet, as I'd obviously prefer to recover my installed apps as they were before, that being the point of a Time Machine backup, right?

    You have a serious drive issue that likely can't be repaired that way.
    Follow the data recovery efforts here, your drive still works and thus data can be recovered, won't be easy
    https://discussions.apple.com/docs/DOC-3172
    If you have your data off the machine, to a storage drive (or earlier with TM)
    then hold command r keys and use Disk Utility to Erase the Lion Partiton with Zero option, and reinstall Lion from Apple's servers.
    use the same name (important), different password ok Software Update fully
    install your programs from fresh orignal sources and return files into their respective folders
    once your stable, read the backup proceedures here etc.
    https://discussions.apple.com/docs/DOC-3045
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
    note, don't move your computer while it's operating

  • How to boot up from firewire disk?

    Hi everyone,
    I just bought a 250Gb Lacie D2 triple interface external hard drive to go with my 15" 1.25ghz G4 powerbook.
    I partitioned the External drive into two volumes, one of which I will reserve exclusively for backing up my entire Powerbook hard drive.
    I used the software (Silverkeeper) that came with the Lacie disk to copy the powerbook hard drive onto the Lacie disk. When I commenced the copying, a dialog box asked me if I wanted to make the copy 'bootable' I clicked yes.
    Now for my question..... How do I boot up from the copy???
    I had assumed that if I switched off the powerbook & then re-started it, (with the Lacie disk connected... Firewire 800) that I would then be given the option of booting from either the Powerbook hard drive OR the Lacie hard drive. Not so.... Powerbook booted up as per normal, having 'recognised' the Lacie disk & placed it's icons on my desktop.
    Obviously there is a simple step I am unaware of, probably holding down a combination of keys whilst re-booting???
    So....How do I boot up from the copy?
    regards
    Ian
    15 Powerbook 1.25Ghz   Mac OS X (10.4.4)   1.25gb ram

    Well to be accurate it is not at all "permanent" - a better and more usefully accurate term would be persistent.
    If you are updating the OS on it you might want it to persist through reboots vs using the very time consuming Option key method each time.
    To go back to the original boot disk or any other one just go to preferences and select the one you want again. Much faster.

  • How to boot always from a firewire disk?

    Hello,
    I hope someone can help me on this.
    My HD is almost dead and it's making a lot of noise. I have managed to create a boot disk
    on an external disk connected through Firewire.
    What shall I do now to have the HD definetly unmounted and have the boot always from the firewire disk?
    Thanks in advance
    Tom

    I've had a similar problem with an external drive that was USB powered.
    In my case, the system was looking for a boot device before the drive was ready.
    I had a friend that was good with OpenFirmware add a delay before booting to give the drive time to become ready. Added 5 seconds to the boot process, but it works!
    Like cldjr said, hold the Option key (⌘) when powering up, if the drive shows up there, I'd guess it's the problem I described...
    Anyone good with OpenFirmware??

  • Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

    Can't seem to get my mac book to boot from the CD after installing new hard drive.
    I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

    If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
    So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
    Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
    http://store.apple.com/us/product/MC573Z/A
    https://discussions.apple.com/message/16276201#16276201

  • Macbook Pro (2010) slow/unresponsive booting OSX from Windows

    Hello All,
    Let me introduce myself. My name is Josh and I am currently deployed in Afghanistan and also pursuing an Info Sec degree. As such I was forced to boot camp Windows 7 on my Mac in order to complete certain classes needing Windows and Windows software. I am running into some issues that I can not seem to work around. First I will give the stats of my computer then try to explain the issues I am encountering.
    Macbook Pro 13inch  Mid 2010
    2.4 GHz Intel Core 2 Duo
    16GB memory
    Crutial 256 GB SSD
    OSX 10.9.2
    Windows 7 Professional
    New battery
    I partitioned the SSD in half for both Windows and OSX. Each has around 30 GB of data on each side. I installed the SSD and memory around 6 months ago and everything worked flawlessly. Needing Windows and being cheap I decided to dual boot, through bootcamp, the two operating systems. Install, although a pain, was completed sucessfully and worked great. It has been installed for about 3 months and ran flawlessly. I have kept up with updates on both sides and running antivirus on Windows. I rarely do any work besides school on Windows but run the antivirus regularly for protection. These issues arose a few days ago. One issue I encounter periodically is that when booting to Windows I hold down the control key and it still loads OSX. I have to try several times to get it to boot Windows. Sometimes it works first try. Once in Windows everything works as it should and fast with the memory and SSD. When I shut down the computer and return to OSX everything loads as normal with the same speed except when I go to open an application. It takes several minutes of spinning wheel for it to open. Until then it is slow and often unresponsive. If I let it run its course it will eventually calm down and work correctly. During this time the fan kicks on. Another issue is that sometimes one of my external hard drives fails to read. I can unplug and plug it back into each of the USB hubs with no luck. The two external hard drives I have are one for Time Machine backups- 1TB Western Digital and the other for all my work- 1TB Western Digital. Each hard drive is scanned with Windows 7 during antivirus checks. Finally, I installed a new battery, as mine was gone, and since the install I do not get the same life span out of a charge (around 5 hours max with little use). If anyone has any advise please feel free to contribute. I would like to solve the issue. Thank you for your time and if you need any more information I would happily provide.
    Also: I will be creating another thread for two more Macbook Pros I am working to resolve issues.
    Josh

    Josh,
    have you tried resetting your MacBook Pro’s System Management Controller, to see if it would have any effect on your battery life and fan frequency?

  • How to erase everything from ssd?

    I had problems with my hdd. everytime i put my macbook pro 2009 to sleep. i couldnot do anything like delete, copy, restart or shut down. so i bought ssd cloned it from my hdd and started using it. it was working fine and then it started giving me the same problem. Now my compter doesnt even start. when i push the power button, i see a downloading bar. when the bar completes downloading( idk what it downloads) it turns off.
    what should i do?

    Post in a new thread wiith the title "MacBook Pro Won't Boot" and you are more likely to get a response.

  • [Solved] Boot only from SSD

    Hello
    I have installed arch about 10 months ago (on a HP laptop), and the idea was like so:
    - SSD - kernel, home, and stuff
    - HDD - stuff (and some bindings)
    I got it working,but if I remove the HDD, I can't boot. I get the message "no drives detected" (or something like that)
    So I'd like to boot from the SSD only.
    Both drives are GPT, ext4 partitions (no swap), see:
    http://imgur.com/8C6UPGk
    Any hints on what I can do to fix that?
    Also, afaik I'm not using UEFI, i'll upload a pic of the bios in a minute.
    EDIT:
    http://imgur.com/lCsvBib
    Thank you all.
    Cheers.
    EDIT-SOLUTION:
    This is a Pavilion Ultrabook 14-b006sa
    2 hard drives (ssd and hdd), they're united if they are under secure boot (if i'm not mistaken), but it CAN run only on SSD. It was a tricky thing, but got it working with Gummiboot, EFI. the partitionning scheme was not the best one for grub, so I settled with a 512 MiB space for FAT32, and do the thing.
    Last edited by ubunchu (2014-02-20 15:34:11)

    alphaniner wrote:
    It's simply that the bios (computer) itself doesn't see the SSD drive alone. If the other HDD is present, no problems.
    You're saying the SSD doesn't show up at all if the HDD isn't present? Are you sure about this? It's not a matter of having installed your bootloader on the HDD or something?
    I have grub installed on the SSD. And yes, I just removed the HDD again, went into the boot menu, and I only had "boot from EFI file" and the live usb i inserted.
    Neburski wrote:
    ubunchu wrote:I got it working,but if I remove the HDD, I can't boot. I get the message "no drives detected" (or something like that)
    Maybe a stupid question but are you sure that you don't have a hybrid drive (SSD + HDD) and thus when you disconnect the HDD you actually also disconnected the SSD?
    I'm going of the fact that you seem to be using a laptop and to me it makes sense that laptops would be using a hybrid drive to preserve space.
    Anyway in case I'm wrong. You should post the output that ANOKNUSA asked for.
    I just re-checked, it's "boot device not found, please install an operating system on your hard disk. gard disk <3F0>
    The SSD isn't being detected, so it might be a hybrid thing... Or maybe it's just a wrong partitioning for grub.
    WonderWoofy wrote:
    I am thinking that this is an mSATA SSD that the windows environment would have used as a cache for the HDD.  If that is the case, there may be no way around it.  I too have one of these mSATA slots, though I have never tried to boot with that as the only thing in the machine.
    I think this may just be in the firmware design.
    Edit: On second thought... if you aren't using that ~30GB ESP to boot the machine, are you sure that grub is actually installed to the SSD?  If it is, then the machine should at least be able to get to the grub prompt I would think.  Even then though, you still don't have anything on the SSD to get yourself any further, so I'm not entirely sure what the point of this excercise is.
    When I got this laptop, it merged both HDD's into RAID.
    It is installed on the SSD, I just re-checked from a live environment, mounted it, and /boot is there.
    I'm quite sure there is a problem with the grub-mbr-gpt setup....
    What info would be relevant to post?

  • How to disable OSX from adding www to an address

    I have to visit a couple of websites that are simply http://domain.com
    One of them is a wizard for one of our websites.
    But OSX automatically adds the www, which causes a *URL not found*
    I can get to it via Virtual PC, as Firefox won't add the www automatically on the PC side. Unfortunately, Safari, Firefox, and Camino will all follow OSX's rule of adding the www when I try to get there from my mac.
    Suggestions on how to do an end-around this benefit?
    Thanks in advance.
    Dual 2.3 GHz PowerPC G5   Mac OS X (10.4.8)  

    Before you enter the URL, press the space bar once. This will keep URL prompts from appearing. This is the only work-around. There have been requests to Apple to make the URL prompt an option in the Preferences selections. You can add your voice by sending feedback to Apple.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer

  • How to boot up from new harddrive install

    I'm about to replace my harddrive before it crashes. My question is, can I copy my existing HD data onto the new harddrive before installing it? I have a firewire case I can use for this process. I have a freeware copy of Superduper I can use.
    I have replaced my HD once before, but it was after my drive crashed so I had to do a new install of OS X and then replace all apps one-by-one. I'm hoping to avoid this by replacing the drive early this time, and it would be great if a cloned copy of my contents put onto the new drive before install could allow me to boot up and operate normally. Thanks!

    Sure. Put the new drive in the FW enclosure and prep the drive:
    Extended Hard Drive Preparation
    1. Open Disk Utility in the Utilities folder.
    2. After DU loads select the new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    7. Repeat Steps 4-6 for each volume created if more than one.
    Next, clone your old system to the new drive:
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the external drive's volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the the external drive's volume from the left side list and drag it to the Destination entry field.
    6. Select the startup volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
    Upon completion of cloning open the Startup Disk preference, select the icon for the external drive, then click on the Restart button. If all goes well your computer should start up from the external drive. Now shut down and swap drives.

  • How to prevent OSX from appending numbers to portable drive

    Hi All,
    I have a very annoying problem regarding portable usb drives, OSX and drive labels.
    Sometimes when I disconnect my portable usb drive and reconnect it, OSX adds a number (or increments the old one) to the end of the portable usb drive label.
    Is there anyway to prevent/disable this?
    Mira

    When that happens to me, I do a system shutdown, or restart, instead of a Force Eject.
    Reason being -- there is something not right, possibly some file still open.

Maybe you are looking for