How to bring company's website into a EP

Hi gurus,
We already have a company website, which was developed in .net, how can we link that website into our new EP implementation? how to config it so it can support multi-language for the old website?
Thanks.
Peter

Hello Peter,
From a content point of view : you should easily integrate your .net intranet with EP using a simple URL iview.
From an authentication point: you need to decide wether you want to keep portal logon as it is by default or setup an authentication scheme to include authentication with your MS ADS or any other authentication mechanism in place in your company.
Note : if users are authenticated in your .net website from their ms-ads logon then it will remain the same and no further configuration is needed unless you want the portal authentification to get integrated with MS-ads logon.
From a multi-language prospective then it all depends on your .net website capabilities. Unfortunately no portal will translate it for you
As an example : if your .net website is multi-language enabled and if by any chance language is transmitted in its URL, then you can customize your url iview to pass this language parameter based on user profile (or any other method).
Hope it helps,
Frank

Similar Messages

  • Have been using Foxfire for AMcG website. Now want to edit MME website. Can't figure out how to bring up second website. Whatever I do, it keeps taking me ba

    Have been using Foxfire for AMcG website. Now want to edit MME website. Can't figure out how to bring up second website. Whatever I do, it keeps taking me back to the original AMcG site.
    Because I'm unable to figure out where to find the answer to this question on this website, would you mind emailing it to <sub>removed by a moderator -j99</sub>. Much obliged, for I'm working on a tight deadline and have no one else to turn to, being it's Sunday.
    Please note this is a publicly available and web search indexed forum that the message appears on https://support.mozilla.org/en-US/questions/950640 you probably do not wish your email address to appear. Note it is possible to use the private messaging ssytem without disclosing your email address
    [https://support.mozilla.org/en-US/messages/new?to=John99 me] [https://support.mozilla.org/en-US/messages/new?to=annmcgill you]

    Sorry I not sure I understand what you are trying to do and what the problem is, are you able to give more details please.
    Are you trying to upload to a site you own ?

  • How to bring the labour cost into costestimate

    Hi friends,
    How to bring the labour cost into costing run, please let us know. i have given the configuration settings but i am not able to get the accurate result. so friends please help me on this.
    where were i have to give the config settings and the   links please tell me.

    Dear,
    The cost sheet format is,
    1. Material cost,
    *2. Labour cost -
    SPRO -> Controlling -> Product Cost Controlling -> Product Cost Planning -> Basic Settings for Material Costing -> Overhead -> Costing Sheet: Components -> Define Calculation Bases*
    1. Here just check whether you have assigned the Labour cost Cost elements with Labour group or not.
    2. T Code - OKTZ : Check whether you have assigned the Cost elemnts here or not
    3. Labour cost is based on : Activity types and Cost center figures updation in KP26
    Let us know if you still need any help
    Thanks
    Edited by: nkonnipati on Feb 15, 2012 4:01 PM

  • After making a website with muse and launching it with Business Catalyst. My website gives a notice: To change this page, upload your website into the public_html directory. How can i upload my website into the public_html directory?

    Hello,
    I'm using a Mac and made a website with Muse. After making the website i published the site and launched this afterwards with Business Catalyst.
    When i enter my website, i got the notification: To change this page, upload your website into the public_html directory.
    Does anyone know how i can fix this? I'm a complete noob in this subject.
    Thank u for reading

    Could you post a link please?
    BC does not give that message - Would be good to see if it is indeed BC.

  • How to bring my valid iMovie into Soundtrack Pro as a multitrack?

    Hello kind people. My most hummed song right now is "I can't get started with you." To my shame, I am unable to bring my valid iMovie into Soundtrack Pro as a multitrack. I have brought the audio alone, but that leaves me grabbing at air. There must be a simple way. Who will tell me how?
    PBG4 17   Mac OS X (10.4.6)  

    Try exporting a Quicktime movie from iMovie, then drag the quicktime movie onto the video track (or drop it into the video window) in Soundtrack Pro.

  • How can i convert my website into a cloud?

    Hi,
    i need help on how to convert my website into a cloud 
    Thank you

    Hi,
    What technology is your website based on?
    If you want to get an idea of hosting sites on Windows Azure, check out the Windows Azure Training Kit:
    http://www.microsoft.com/en-us/download/details.aspx?id=8396
    Take a look at the hands-on-labs relating to Windows Azure Web Sites. This will give you an idea of the hosting websites in Azure.
    The "Migrating ASP.NET Applications to Windows Azure" lab will be useful if your website is ASP.net based.
    Regards,
    Alan
    http://www.CloudCasts.net - Community Webcasts Powered by Azure

  • How to access 3rd party website into MS CRM online 2011/2013

    Hi,
    I want to access a form which is in my .net application/website  into the ms crm 2011/2013 on-line versions using web-services.
    Actually from .net form using web-service I have added contacts into CRM but now I want to do it in reverse way, like if I have stocks in my website I want to access them in my CRM 2011/2013.
    jo

    Hello,
    Recheck following articles:
    https://msdn.microsoft.com/en-us/library/gg509030.aspx
    https://mscrmmindfire.wordpress.com/2013/06/14/calling-external-web-service-from-a-crm-2011-plug-in/
    Dynamics CRM MVP/ Technical Evangelist at
    SlickData LLC
    My blog

  • How to import images of websites into FCP....any ideas?

    Hi,
    I was asked to cut several trailers for an award show. Which is nice. However, they have this category about "best website", and of course, they want to use images of those websites, the banners, the headlines and so on. I don't mean single images found on that website, but rather the site from head to toe, from top to bottom, left to right.
    I tried saving the websites from Safari as a PDF, and then convert them into a TIFF, import into FCP and it works....but it looks less than desirable.
    So even I have come to the conclusion that there is my way of doing this, and that there is a proper way of doing it. Does anybody have an idea how to do this at a reasonable resolution? I guess they want me to do a bit of Ken Burns as well, so the images would have to be larger than SD resolution.
    Thanks in advance for your help,
    Colin
    PowerMac G5 2.5GHz DP and PowerMac G4 500MHz DP   Mac OS X (10.4.7)   4.5GB RAM, Decklink Extreme

    The tiffs are probably the best solution but they are going to be bigger than the actual Web sites' graphics.
    Here's what I'd so: Tell your client (Is this a paid gig?) to give you the graphics they want you to use. Here's why. They'll go download it all and save it in one format.
    How will these be shown? What's your production format? It won't do much good to overresolve your sequence settings and doing so will drive up your processing times tremendously. You will need some blur on those tiffs. Another thing you want to do is experiment if you can with the display venue. KNow what your output is going to be shown on and insist or demand a chance to test it.
    bogiesan

  • Can you bring an existing website into WebTools?

    My customer has a website already that would just need a few bits tweaking if he could bring it into WebTools.  Is this possilbe?  Has anyone done it already?
    Kind Regards
    Jan

    Hi Jan,
    Have you managed to get any information on your question?
    Dipan.

  • How to bring overview page fields into Result list

    Hi All,
    i have a requirent to bring the Contract over screen fields (item product ID) into Contract search screen result list grid.
    how resolve this requirent.
    thanks in advance, i will really apprisiate for your help..
    regards,
    kishore

    Hi Kishore,
    As pointed out by Masood, you need to create value attributes and handle the get methods.
    Steps:
    a) In the View for the result list you will have a table context node. You need to enhance that.
    b) In that you need to create value attributes for the new attributes you want to display. This is done by changing the get_table_line_sample and adding the new attribute in the structure. Then one needs to create the get_, get_i, get_m methods.
    c) The important method is get method where you need to read the relations and get the item attributes.
    I hope it works.
    Thanks!
    Amrut Tadas

  • How to bring data from arrays into xy-graph?

    Hello,
    i have some data which is currently stored in two arrays. One array with values and another array with timestamps.
    Now my questions is how can i bring/convert these into the format of XY-graph?
    Thanks for help.

    Hi One,
    - Why do you use a InsertIntoArray when you want to append new plots to an array of plots? Use BuildArray!
    - Why do you initialize your shift register to already contain (atleast) one plot?
    - Why do you use a shift register at all? Why not rely on the autoindexing output tunnel? 3 iterations will yield 3 plots easily…
    - Why don't you clean up your VI before uploading?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How do I load my website into iWeb after backing up my computer?

    I have the site in the "Sites" folder but I can't seem to find a way to reload the content into iWeb to edit it again.
    How can I solve this problem?
    If you need more information I can try to provide it.

    Cool,
    Um so if I didn't backup that file am I screwed? I only took the files in the "Sites" folder and hoped that would be enough.
    It wasn't a direct backup my hard drive crashed or whatever and I had to do an emergency backup as I didn't have proper backup due to moving countries and what not. Thats me just being new and not knowing anything about this sort of stuff.
    Would be great if there was a way to solve the problem still if not is the best thing to do as see this as an opportunity to reinvent my Website?
    Thanks.

  • How do I combine 2 websites into one?

    I know this used to be possible, as I'd seen it posted here, but didn't take notes then
    background: we hold summer video camp at our church. The 2009 camp created the video and created their own web pages/site and uploaded it to the 'summercamp' website  (one of our subdomains). Then the 2010 camp created their own web pages/site on a different computer and uploaded it, which overwrote the 2009 pages.
    Now, I would like to have one summercamp website that showcases both of these year's work, and which we can simply add a new section for each year. I visualize this as a welcome/home page with each year listed, with new ones being added, and the text linking to that year's pages. (each year's website has 2 or 3 pages).
    any ideas how Ican set this up so that the summer camp people can continue with it? I do have the original domain.site file from both years on my computer to work with
    Thank you for your guidance.
    Elizabeth
    Oh, I haven't updated to the newest version of iWeb, it's about 2 years old or so.

    iWebSites is the application you will need to use. Rename the domain files to match the website it contains and put them in your Users/Home/Library/Application Support/iWeb folder.
    Launch iWS, select the two domain files and click on the Merge button. You will be asked to name the new domain file that will contain both website.
    Click to view full size
    OT

  • How to bring in source file into OEPE

    Hi, I used import to bring up an older version project, but it has a lot extras. The only thing I need is a plain java project. So I create a new empty java project and copy the source code to this project's src directory in the file system. I expect my java files will show in the Pacakge Explorer under this new project. but they won't. How can I bring in my source? Thanks!

    Any time you modify contents of a project outside of Eclipse, you should right click on the project in Eclipse Project Explorer and invoke Refresh command. This will get Eclipse synchronized with the changes you've made. To keep this from happening in the future, it is best to perform operations on contents of a project from within Eclipse.
    - Konstantin

  • How to convert my whole website into PDF

    I have my own blog. How can I convert my whole blog into pdf for backup ?

    I am also looking for exact answer to backup my content of blog into PDF. So, How should I do for my blog ? Is there any software or tools for it?

Maybe you are looking for

  • If statement to put "Yes" or "No" in a table cell on another page

    Hello I have tried to find a solution to this and I just can't figure it out. I have gone through all of the messages and tried the examples and no go. Please help, thanks. THIS IS WHERE THE RADIO BUTTON IS: ----- form1.BorrowerInput.OtherPaymentsGro

  • DB13 - Check DB does fails

    I'm getting the following error when I run CHECK DB in DB13: Job started                                                                                Step 001 started (program RSDBAJOB, variant &0000000000182, user ID MCCARTJX)                 Exec

  • Total in Pivot Table

    Hi, I have built a pivot table where due to the large number of resort, I created an extra column and put the following formula CASE WHEN RCOUNT(1)<16 THEN '1-15' WHEN RCOUNT(1) <31 THEN '16-30' WHEN RCOUNT(1)<46 THEN '31-45' WHEN RCOUNT(1)<61 THEN '

  • My facetime not working

    my Face time not working

  • I am trying to cancel my annual membership, how?

    However there doesn't seem to any way to cancel an annual membership online. I tried the chat button but it takes me in a loop, and there's no phone number.