How to Bring "Division" field into PCA form to create Report?

Hi,
I need to create Balance sheet reports -Division wise in profit center accounting.Kindly advise me how to bring Division field in to FORM of PCA.Once i get the Division field in to FORM of PCA then i can full fill the requirement.
Kindly advise me as i am not able to bring it either through Key figures or Characterstics.how do i bring into KE84 form
Please help me
Supriya

Hello,
I do not think division wise balance sheet is possible.
Regards,
Ravi

Similar Messages

BI 7.0: How to bring DataSource fields to InfoSource in design

We've replicated the generic datasource from R3 to BW and we have created an InfoSource with blank fields. We remember on BW 3.x version that we could bring Datasource fields to InfoSource by clicking somewhere, but on BI 7.0, we are trying to do the same thing, but can't find some function to do this. Then we try to right click the InfoSource and then select 'Create Transformation', and then to select the source system and the datasource, but of course we would get the error msg like "There are no fields in target TRCS InfoSource_Technical_Name". Any idea on how to bring Datasource fields into the blank InfoSource on BI 7.0?
Thanks!

Hi,
Instead of bringing the DS fields into a blank infosource, ideally, what you can do
is, you can create a new infosource based on your generic data source, which would make your process easy..
cheers,
Pattan.

I added a custom field into my form in BC but it wont render.

I added a custom field into my form on BC but I cannot get it to show up whhen I preview it. Does anyone know why this is happening?

Check out this http://ellenmemorialhcc.businesscatalyst.com/contact-us.html In this site I am just trying to add a 4 checkboxes. I have tried previewing it and everything and it will not make the changes. How do i get these checkboxes to show up on my site. I found where in business catalyst to access them and I enabled those features in BC but i cannot figure out how to get this to show up live on my business catalyst site.

How to make a field in adobe form noneditable

how to make a field in adobe form noneditable. like info keys..
when this form is sent through worflow the receiver shudnt be able make changes to the field value...(I have a form, which has fields prefilled(like pernr employee name) but these fields are in editable able..(i want only some fields to be uneditable not all)
Edited by: kumar gaurav on Apr 11, 2008 8:04 AM

Hi,
You can make fields non-editable at runtime using this code:
field.access = "readOnly"
Hope this helps.
Amit

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

How to bring a website into Adobe muse for editing

How to bring a website into Adobe muse for editing?

Adobe Muse only allows .muse files for editing. You can't import a previously created page say in Dreamweaver into Muse.

Hi, plz help me. i wanna store photos to sql database. so how to insert file field into insert record in dreamweaver cs3?

I dont know how to insert file field into insert record in DW. i also want to know, insert dynamic table with image field. Plz help me anyone. Ty..

ohh kk thank you bro. But How to store photos to server file. I wanna upload and display the photos in webpage. Can you send me the php code for this?

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

How to bring VRGNG field in BI

Hello All,
I am trying to extract Cost Center Actual data using 0CO_OM_CCA_9 datasource.
I need to have VRGNG (CO Business Transaction) field shown in my report.The above standard extractor doesn't bring this field directly.
Can anyone tell me how do solve this?As the VRGNG field is present in the source table of this extractor, do I have to write any code to bring this value to BI or not necessary ?
I have read some links and got to know that there are some BI characteristics (Info objects)like 0METYPE,0VTYPE,0VTDETL,0VTSTAT . With these four characters , i can fulfill my requirement.
Please tell me how to take VRGNG in BI
Thanks

Hello All,
I am trying to extract Cost Center Actual data using 0CO_OM_CCA_9 datasource.
I need to have VRGNG (CO Business Transaction) field shown in my report.The above standard extractor doesn't bring this field directly.
Can anyone tell me how do solve this?As the VRGNG field is present in the source table of this extractor, do I have to write any code to bring this value to BI or not necessary ?
I have read some links and got to know that there are some BI characteristics (Info objects)like 0METYPE,0VTYPE,0VTDETL,0VTSTAT . With these four characters , i can fulfill my requirement.
Please tell me how to take VRGNG in BI
Thanks
1) Create a append Structure in the Extract Structure of the Data Source 0CO_OM_CCA_9.
2) Add Field "VRGNG" to the append structure and Activate.
3) Create a User Exit for your Datasource.
Function Module: EXIT_SAPLRSAP_001
Main Include: ZXRSAU01
case i_datasource.
when '0CO_OM_CCA_9'.
    perform 0co_om_cca_9_exit tables i_t_data.
4) FORM 0co_om_cca_9_exit tables i_t_data structure <EXTRACT STRUCTURE>
Here you write the code to populate the field "VRGNG" based on where you want to fetch the value of this field.
Example: Table COEP
I am assuming this is where you want to extract the value
types:
begin of typ_coep_key,
kokrs type coep-kokrs,
belnr type coep-belnr,
buzei type coep-buzei ,
vrgng type coep-vrgng,
end of typ_coep_key.
data:
t_coep type typ_coep_key occurs 0 with header line,
th_coep type hashed table of typ_coep_key
             with unique key kokrs belnr buzei
             initial size 0 with header line.
data: l_count type i.
describe table i_t_data lines l_count.
check l_count > 0. "If there are no records - EXIT!!!
loop at i_t_data.
move:
        i_t_data-kokrs to t_coep-kokrs,
        i_t_data-belnr to t_coep-belnr,
        i_t_data-buzei to t_coep-buzei.
collect t_coep.
endloop.
sort t_coep.
select kokrs belnr buzei vrgng
       from coep
       into table th_coep
       for   all entries in t_coep
       where kokrs = t_coep-kokrs and
                belnr = t_coep-belnr   and
                buzei = t_coep-buzei.
free: t_coep.
loop at i_t_data.
read table th_coep with table key kokrs = i_t_data-kokrs
                                    belnr = i_t_data-belnr
                                    buzei = i_t_data-buzei.
if sy-subrc = 0.
    move th_coep-vrgng to i_t_data-vrgng.
    modify i_t_data.
endif.
endloop.
free: th_coep.
5) This will populate the Field Value you need into the BW extract structure.
6) Create a custom InfoObject in BW if you cannot find a SAP Delivered Object.
Possible SAP Delivered Objects you can use are
0FI_RACTIV - Business Transaction
0BUS_TRXN - Business Transaction
7) Create a TEXT DataSource for VRGNG based on TABLE TJ01T
TJ01T - Business Transaction Texts
That should do it.
Cheers!
Vasu

LOVs again! How to return multiple fields to calling form

Hi
Newbie question, any help GREATLY appreciated :)
Is there a simple and easy way to return more than one field from a LOV.
I need this as I have a composite fk comprised of 2 fields, and as such need to return 2 fields from the LOV to the calling form.
(My environment: JDeveloper 9.0.5.2 build 1618)
CM

Thanks, you put me on the right track here. Further investigations show the following sample provided by OTN shows how to use both the session request/response values or a JavaBean to do this:
http://www.oracle.com/technology/sample_code/products/jdev/10g/ADF_UIX_UserInput.zip
As such I post my solution to my original post. Hopefully it's useful to someone beside myself. I have to write up my notes anyhow so it's no fuss to submit them to the forum. I must admit I'm a newbie and slightly demented Forms programmer so such solutions aren't so obvious to me. With this in mind please include the "standard disclaimer" here, with the addition "mileage may vary" warranty.
For these notes I've used the "HR" demo Oracle schema. In particular the tables departments and employees. As you know there is a master-detail relationship between these 2 tables, where each department may have one or more employees.
We have the requirement on a webpage to:
1) Provide an input-form-with-navigation to edit the employees.
2) Display the relating department_name field, rather than just showing the department_id which is meaningless to the user. For example if the employees.department_id = 40, we wish to show the department name "Human Resources" on the employees record.
3) Provide a LOV for the department ID field to allow the user to change the underlying department_id to a different master departments record.
4) Update 2) given a change via 3).
To do this do the following:
Entity Objects
1) Create default EO/VOs on both tables.
2) In the employees EO, create a new field "DepartmentName" to represent the derived department name field.
3) Set the new EO attribute's selected-in-query field.
4) In the query-column-expression field, enter a query to derive the department name field for each record in the detail-employees-EO.
eg. (SELECT dpt.department_name FROM departments dpt WHERE dpt.department_id = employees.department_id)
Ensure to include the brackets.
5) Apply the changes and accept the warning to create default data-type settings for the new attribute.
View Object
6) In the employees VO, include the new field DepartmentName as a selected attribute from the EO.
7) Apply the changes and accept the warning to create default data-type settings for the new attribute.
8) Test the model by running the ADF BC tester. Once running select the employees VO and step through the records, making sure the DepartmentName field has a value and changes appropriately according to the relating parent department_id.
UIX input-only-form
9) Create a new UIX web page employeesEdit.
10) From the data-control pallete, drag in the employees VO as an input-form-with-navigation.
11) For testing purposes it is also useful to have a create, delete, commit and rollback button, so includes these too.
12) Within the employees VO data-control, also drag across a messageLovInput for the DepartmentId. Position it under the existing DepartmentId messageTextInput within the UIX page. We'll remove the existing messageTextInput later, but it's useful to leave it in for testing purposes initially when the LOV returns values.
UIX LOV
13) Navigate to the default LOV page that has just been created for you.
14) Within the data-control pallete, expand the departments VO, select department ID then LOV-table from the drop-down, and drag this item onto the LOV page.
15) Save your changes.
16) Run your application. For an existing employee, invoke the department LOV and select an alternative department. Note on returning to the employees page the DepartmentID (both the messageTextInput and messageLovInput fields) are updated, but the DepartmentName is not. To do this we need to create a JavaBean to return multiple fields from the LOV to the original form.
JavaBean
17) Within your ViewController project, expand the ApplicationSources-View node.
18) Select the new button, and create a standard JavaBean.
19) Name the bean DepartmentsLov.
20) Via the class editor, add 2 private scope fields DepartmentId and DepartmentName with String data-types, ensuring the create get/set method checkboxes are checked.
21) Make and save your changes.
22) From the navigator drag the newly created java file into the data-control palette.
UIX LOV
23) Return to the LOV webpage.
24) Your LOV page will have a lovSelect event handler something like the following:
<event name="lovSelect">
<set property="inputValue"
value="${bindings.DepartmentId.inputValue}"
target="${data.employeesEdit.DepartmentId}"/>
25) Change the lovSelect as follows:
<event name="lovSelect">
<compound>
<set property="inputValue"
value="${bindings.DepartmentId.inputValue}"
target="${data.employeesEdit.DepartmentId}"/>
<set value="${bindings.DepartmentId.inputValue}"
property="inputValue"
target="${bindings.JavaBeanDepartmentId}"/>
<set value="${bindings.DepartmentName.inputValue}"
property="inputValue"
target="${bindings.JavaBeanDepartmentName}"/>
</compound>
26) Within the UI model navigator, right-click on the top node, then create-binding, input, text field.
27) Select the AppModuleDataControl, then DepartmentView, then the DepartmentName field, and then the ok button.
28) In the UI model select the new field, then in the structure pane rename the field to DepartmentName.
29) Within the UI model navigator, right-click on the top node, then create-binding, data, iterator.
30) Select the DepartmentsLovDataControl and name the new iterator DepartmentsJavaBeanIterator.
31) Again in the UI model navigator, right-click on the top node, then create-binding, input, text field.
32) Select the DepartmentsLovDataControl then departmentId field, then the ok button.
33) In the UI model select the new field, then in the structure pane rename the field to JavaBeanDepartmentId.
34) Again in the UI model navigator, right-click on the top node, then create-binding, input, text field.
35) Select the DepartmentsLovDataControl then departmentName field, then the ok button.
36) In the UI model select the new field, then in the structure pane rename the field to JavaBeanDepartmentName.
UIX input-only-form
37) Return to the main employeesEdit UIX form.
38) Your UIX page will have a lovUpdate event handler something like the following:
<event name="lovUpdate">
<null/>
39) Change the lovUpdate as follows:
<event name="lovUpdate">
<compound>
<set value="${bindings.JavaBeanDepartmentId.inputValue}"
property="inputValue"
target="${bindings.DepartmentId}"/>
<set value="${bindings.JavaBeanDepartmentName.inputValue}"
property="inputValue"
target="${bindings.DepartmentName}"/>
</compound>
</event>
40) Repeat steps 29 through 36 for this page.
41) Within the UIX page find the entries for the departmentId LOV, and the DepartmentName. They should look something like the following:
<messageLovInput id="${bindings.DepartmentId.path}"
model="${bindings.DepartmentId}"
destination="lovWindow1.uix"/>
<messageTextInput model="${bindings.DepartmentName}"
columns="10"/>
42) Modify these 2 entries as follows:
<messageLovInput id="DepartmentId"
model="${bindings.DepartmentId}"
destination="lovWindow1.uix"
partialRenderMode="multiple"
partialTargets="DepartmentId DepartmentName"/>
<messageTextInput id="DepartmentName"
model="${bindings.DepartmentName}"
columns="10"/>
43) Finally delete the original DepartmentId messageTextInput field, leaving the DepartmentId messageLovInput.
Testing
44) Open your UIX input-only-form.
45) Call the LOV and change the department for an existing employee record.
46) Return to the employees page and note that the department ID and name have changed.
47) Commit your changes.
48) With your favourite data inspection tool (a'la Toad), check that the employee record's department ID has been appropriately saved to the database.
<The End>
Phew!

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

Crystal report - how to split a field into more fields

Hello,
I`m new to Crystal reports and I`ve got a trouble. I have field which contains an address - street, city, zip code. The example is:
STEHLIKOVA 977 165 00 PRAHA 620 - SUCHDOL 165 00.
What I need to achieve is to split this string into three separated fields. I`ve trouhg a couple of forums but haven`t been able to find a proper answer. The problem is that the addresses differ so I can`t use an absolute defining of a start position. Looking at the DB (HEXA code) the parts in the string are divided by two dots:
STEHLIKOVA 977..165 00 PRAHA 620 - SUCHDOL..165 00
I`ve been able to work out this solution:
stringVar array x := split({cparty.STREET_ADD},"..");
Local numberVar i;
Local stringVar outputString := "";
For i:=1 to Count(x) do
outputString := outputString + x[i] + Chr(10)
outputString;
It splits the string into three rows:
STEHLIKOVA 977
165 00 PRAHA 620 - SUCHDOL
165 00
And I don`t know how to find the end of each row so to be able to separate the strings and report them as three different fields.
Would be anyone so kind and help me out with this?
Thank you.
Petr

Hi
Actually using a for loop is not necessary here. All you need to do is to add several formula fields: one for street, one for city and one for zipcode. In @street field you add formula:
stringVar array x := split({cparty.STREET_ADD},Chr(13));
x[1];
Then you drag such formula field to details section of your report and watch preview to check if everything looks alright. Repeat for every formula field that you'd like see in your report.
In @city you add almost identical formula but you change index, i. e. instead of x[1] you need to use x[2]. Then for @zip x[3].
You may need to check if your address has all three parts - for example if you want to use formula in the second part of your address field you may need check first if there are at least two parts after split:
stringVar array := split({cparty.STREET_ADD},Chr(13));
numbervar c;
c := count(x);
if 2 <= c then
x[c];
Var 'c' is used to store the number of elements in array after split. Then I'd like to check if the part (second) actually exists. So I try to check if number of part that I want to refer to is not bigger than the number of elements in array after split (here stored in var 'c').
Actually the code presented above is not enough since you have no guarantee that you'll always get address structured in the very same way. For example in demo PL database I have zip code and city in the same row after split with Chr(13) as delimiter.
You'll need to experiment or ask someone to prepare correctly structured data coming from B1 to your report.
Kind regards,
Radek

How to bring a .jpg into an open PSD file as a layer & smart object

Note: Posted in MAC section also.
Goal:
Using a script - Bring a .jpg an artist chooses, into Photoshop in an existing project into its own layer, and make it a smart object.
This way, when the artist double-clicks on the smart object in Photoshop, it opens the original .jpg
Currently, doing this creates a new window and file - a temp file, called xxx.psb.
Photoshop does this by default to prevent destructive editing. However, in this case, we purposely want to open the original.
Why? the .jpg files are approved art by the organization.
Here is the script I did and have working in JavaScript. (Has to be js because it will run on MAC's)
Currently, it creates a NEW file. I want it, however to create the SO as a layer in the existing open file.
In JS: (has to be js for MAC's)
var idOpn = charIDToTypeID( "Opn " );
    var desc4 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
    desc4.putPath( idnull, new File( "C:\\Users\\jleahy\\Desktop\\JPG_Meeting.jpg" ) );
    var idsmartObject = stringIDToTypeID( "smartObject" );
    desc4.putBoolean( idsmartObject, true );
executeAction( idOpn, desc4, DialogModes.NO );

I'm half way there, but stuck at:
Getting a file location reference when the .jpg is first brought into PS as a layer.
Getting a script to write the location of the file into the medata for the PSD in some field
Reading back the metadata file location for the .jpg and bringing it back into the PSD again.
Any help would really be appreciated.
I can make the completed script(s) available when its complete, as this has possibilities for other uses, batch process, and more.

How to make expandable field in pdf forms?

Does anyone here know how to make expandable field in a PDF form?
I want the field, originally appear to be a 1-liner, to expands when you put in more text and everything that is underneath the expandable field shifts or moves down.
pls help.
Thanks!

No, LiveCycle Designer is not included in Creative Cloud and is available only for Windows. It was included with the Windows version of Acrobat Pro before Acrobat 11 but is now a separate program and about $300.

How to Bring "Division" field into PCA form to create Report?

Similar Messages

Maybe you are looking for