How to bring my valid iMovie into Soundtrack Pro as a multitrack?

Hello kind people. My most hummed song right now is "I can't get started with you." To my shame, I am unable to bring my valid iMovie into Soundtrack Pro as a multitrack. I have brought the audio alone, but that leaves me grabbing at air. There must be a simple way. Who will tell me how?
PBG4 17 Mac OS X (10.4.6)

Try exporting a Quicktime movie from iMovie, then drag the quicktime movie onto the video track (or drop it into the video window) in Soundtrack Pro.

Similar Messages

How to bring an Avid project into Premiere Pro CS3?

My client has an old Avid project that needs to be re-edited. I'm using Premiere Pro CS3. Can easily purchase any necessary conversion software (NOT going to buy Media Composer :P). Is there any way to 'easily' import it?
I'm familiar with the Automatic Duck software suite, but they don't seem to have an option for conversion to PPro. What about converting from Avid to After Effects, and then somehow importing the After Effects into PPro?
I'm extremely new to EDLs and very hesitant to use them :). Any advice?

I've had some degree of success going from Avid to PPro through the use of AAF (Advanced Authoring Format). If the project is really complex, the transfer may not work that well, but I was surprised to see just how much transferred cleanly. Check the Avid documentation for exporting a project as an AAF, and the PPro documentation for importing.
One thing to note is that you will have to recapture the media from the original source tapes, as PPro will not work with media files created during capture on an Avid system.

IMovie ansd Soundtrack Pro

I'm just starting to play with iMovie and I have Logic Studio which comes with Soundtrack Pro.
Is there any way to export an iMovie into Soundtrack Pro for audio editing?
Thank

Try exporting a Quicktime movie from iMovie, then drag the quicktime movie onto the video track (or drop it into the video window) in Soundtrack Pro.

How to bring the labour cost into costestimate

Hi friends,
How to bring the labour cost into costing run, please let us know. i have given the configuration settings but i am not able to get the accurate result. so friends please help me on this.
where were i have to give the config settings and the links please tell me.

Dear,
The cost sheet format is,
1. Material cost,
*2. Labour cost -
SPRO -> Controlling -> Product Cost Controlling -> Product Cost Planning -> Basic Settings for Material Costing -> Overhead -> Costing Sheet: Components -> Define Calculation Bases*
1. Here just check whether you have assigned the Labour cost Cost elements with Labour group or not.
2. T Code - OKTZ : Check whether you have assigned the Cost elemnts here or not
3. Labour cost is based on : Activity types and Cost center figures updation in KP26
Let us know if you still need any help
Thanks
Edited by: nkonnipati on Feb 15, 2012 4:01 PM

How do I chop my iMovie into three separate parts?

How do I chop my iMovie into three parts?

To split a fully edited movie into three parts -
While in Project Library view (where all your projects are listed), right-click or Control-click on your project. From the pop-up menu, select Duplicate Project. Do this 3 times so that you have 4 identical projects - the original (for safe-keeping) plus 3 copies.
If desired, rename each of the duplicates, such as My Movie Pt 1, My Movie Pt 2 and My Movie Pt 3 (or whatever you like). Even without renaming, iMovie will ascribe a number to each duplicate, while including the name of the original movie.
Now delete sections from each duplicate so that you end up with 3 separate movies, each with their own content.
Note that duplicating projects doesn't take up much extra drive space. Projects simply reference (point to) the actual video clips in the associated Event (as well as keeping track of any added transitions, titles, music, effects and so forth).
John

When I bring an FCP sequence into ST Pro, something is very screwy....help!

When I bring a sequence into soundtrack pro, some odd things happne, I'm hoping someone can answer my questions. First off, it slows my computer waaaaaaaaaaaay down. It moves extremely slow so I can't even do any work. The project is on a Lacie firewire 800 drive.
It also seems the audio isn't really included with the project. Even though the audio waveforms should show up in the audio clips, it doesn't. It does on a couple clips but doesn't in most. When I double click an audio clip to create a new audio file project to edit it, most of the functions aren't available (like noise removal). And the sample waveform still isn't visible.
My guess to why this is happening is that ST Pro is using referencing the source files which is causing it to be slowed down and is also causing the odd occurance of no waveform and no ability to effect the clips. I tried saving the project with the box checked that says something like "include audio files" and it says I don't have the room for this. This strikes me as odd because I have 50 gigs available.
I could export AIFF's for each track in the project and then reassemble them in soundtrack but then I'd have to edit out all the dead space to re-create what I should be able to get simply by exporting to ST pro.
Should I decompose the sequence prior to sending it to ST Pro? I hope these questions make sense, please let me know if they dont and please leave any advice you can.

Yes, I did reset the scratch disks, but the slowness of the program is the least of my concerns. (I checked the console, everything appears fine).
My main problem is that when I import a multitrack prjoect from FCP, not all the waveforms are visible. Only 1/3 of the clips have the little visible waveforms inside them. If I double click a clip that doesn't have the waveform inside of it, and open an audio project file in hopes of doing noice print removal or other effects, it will not allow me to do any effects. I can hear everything fine, just can't do any effects or any "set ambient noise print", noise removal etc... It also displays the entire length of the original clip in the audio project file (like if its from tape 1, it brings in the entire hour of tape 1).
The way the manual talks about it, I should be able to simply bring in a project, do with it as I please, then export a mix, and it'd be great if I could.
The only workaround I can think of is to seperate each track, export an AIFF for each track, import it into soundtrack, razor all the places where I had cuts in the FCP project, bring in the video, and then I could actually start working.
And is it odd that apple doesn't support this program AT ALL. I called apple and the only way to get help is pay $800 for pro support.
Lesson learned, buy Pro Tools LE, use OMF's and be done with it.

Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
Edgil

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

Import Live type into Soundtrack Pro

I have created a live type motion menu and need to import it into Soundtrack Pro for precise audio scoring. Can I do this?
Thanks
Jeff

not to familiar with this, but I believe you could open the sequence up in FCP and then send to soundtack.

How to bring company's website into a EP

Hi gurus,
We already have a company website, which was developed in .net, how can we link that website into our new EP implementation? how to config it so it can support multi-language for the old website?
Thanks.
Peter

Hello Peter,
From a content point of view : you should easily integrate your .net intranet with EP using a simple URL iview.
From an authentication point: you need to decide wether you want to keep portal logon as it is by default or setup an authentication scheme to include authentication with your MS ADS or any other authentication mechanism in place in your company.
Note : if users are authenticated in your .net website from their ms-ads logon then it will remain the same and no further configuration is needed unless you want the portal authentification to get integrated with MS-ads logon.
From a multi-language prospective then it all depends on your .net website capabilities. Unfortunately no portal will translate it for you
As an example : if your .net website is multi-language enabled and if by any chance language is transmitted in its URL, then you can customize your url iview to pass this language parameter based on user profile (or any other method).
Hope it helps,
Frank

Bringing layered PS files into Premiere Pro 5.5

I'm switching to PP from Final Cut Pro, and I do a lot of editing of animatics for animation. I'm trying to figure out how to bring in a layered PS file so that it comes in as one layered, nested clip rather than a series of clips that have to be rearranged. I assume I'm doing something wrong here - there's got to be a way to bring in a layered file into PP as a layered file and not a series of clips.
Also, is there a way to have however I want to import it (layered, flattened, etc) applied to every file? I'm brining in dozens of PS documents and I just want them all to come in as layered documents.
Thanks for the help!

When you import a PSD, you are presented with a dialog asking how you want to import it. You have the following options, with the following results:
Merge All Layers: Flattens all layers in original PSD into one footage item
Merged Layers: Flattens layers you specifically select in the dialog from the original PSD into one footage item
Individual Layers: Imports layers you specifically select as individual footage items, and creates a bin with the name of the PSD to contain them
Sequence: Imports layers you specifically select as individual footage items, create a bin with the name of the PSD, and also creates a sequence with the name of the PSD with the layers stacked as tracks.
Select the last option, and then open the sequence that is created. You can nest this into your working/final sequence, and work with the layers/tracks within it to animate them separately.

Import 5.1 stems into Soundtrack Pro

I have 50 pieces of audio that are all saved as 5.1 stems with appropriate file names (.L.wav, .R.wav, .C.wav, etc.). I need to import them as multichannel files, edit and export as 5.1 stems again.
Editing and exporting are no problem. I can import my 5.1 stems into a new multichannel audio file, the probelm is, Soundtrack Pro automatically assigns them in the wrong order. They are importing in the order they are listed in the file broswer: C, L, Lf, Ls, R, Rs. Alphabetically ordered. They should be importing as L, R, C, Lf, Ls, Rs because in the Soundtrack Pro manual it states that the program 'uses the SMPTE/ITU standard for routing output channels.' This doesn't seem to be the case for importing however.
Am I missing something here?
This makes working in Soundtrack impossible. Not only are they assigned in the wrong order, but the original source name is gone in the new multichannel audio file. So, reordering the tracks in the multichannel file will inevitably result in mistakes as I will have to manually drag numbered channels into a new order for every one of these clips.
Is there anyway to get Soundtrack Pro to import the stems in the correct order?

hi
there is a common misconception about mixing surround audio and playback of encoded surround audio files - check this recent thread - my post is the 4th reply in the thread ...
http://discussions.apple.com/thread.jspa?threadID=1172507&tstart=0
hope it helps
gavin little
echolab
dublin, ireland
http://www.echo-lab.com/
http://www.imdb.com/name/nm1962022/

How Do you import C100 footage into Premiere Pro CC

I just tried importing Canon C100 footage into Premiere Pro CC, but get no sound. I'm not sure what I'm doing wrong and I pray I don't have to convert this footage before bringing it in. Is there a workflow anyone can recommend? Do I have to convert the footage first? Thanks, Lucian

Lucian,
PrPro should work natively with the Canon C100 footage ... it works with almost everything out there. And with the C100 shooting MP-4, AVCHD, & H.264, those are all handled easily by PrPro.
My question ... I would surmise (from what little info you include) you are shooting AVCHD? The reason I say this is that format splits audio & video into different files ... so it's a bit trickier to "import" than others that have the a & v in one file. Make sure you copied the whole top-leveL FOLDER and all sub-folders (not just the footage or contents of a folder) from the cam/card into the computer for AVCHD ... and then when you import into a project via the media browser your audio & video should be all connected by PrPro.
There have been numerous threads here where AVCHD users have "lost" their audio, only to find they'd simply left it behind by NOT copying all the folders & subfolders their camera had created.

How do you fix Clipped Signals in Soundtrack Pro in the Waveform Window

In "Analysis", under "Analysis Type", I checked (only) the Clipped Signal box and clicked on the "Analyze" button. STP found numerous clipped signals. However, selecting either one or all on the list, the "Fix" and "Fix All" buttons remain grayed out. How do I fix these?
macbook Pro 15" Mac OS X (10.4.9) Soundtrack Pro 1.1

Far as I know, this feature just finds the clipped
clips . . . it doesn't fix them. You'd have to do
that manually and there's no good way to do that . .
. except to avoid them in the first place.
jimi
Thank you. I suspected that was the case. Wonder if that will be improved upon in FCS2?
Henry

How to import VEC1-3 packs into Logic Pro 9. help plz

Hello everyone, not sure if this has been answered (couldn't find nothing by searching) but i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
any help would be appreciated. thank you!

JSNP77 wrote:
i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
There are "free download" EXS presets - look at the bottom of the [home page|http://www.vengeance-sound.com/eng/indexes/indexFreeSounds.html] "Vengeance EXS Presets" and download.
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

How to bring overview page fields into Result list

Hi All,
i have a requirent to bring the Contract over screen fields (item product ID) into Contract search screen result list grid.
how resolve this requirent.
thanks in advance, i will really apprisiate for your help..
regards,
kishore

Hi Kishore,
As pointed out by Masood, you need to create value attributes and handle the get methods.
Steps:
a) In the View for the result list you will have a table context node. You need to enhance that.
b) In that you need to create value attributes for the new attributes you want to display. This is done by changing the get_table_line_sample and adding the new attribute in the structure. Then one needs to create the get_, get_i, get_m methods.
c) The important method is get method where you need to read the relations and get the item attributes.
I hope it works.
Thanks!
Amrut Tadas

How to bring my valid iMovie into Soundtrack Pro as a multitrack?

Similar Messages

Maybe you are looking for