How to bring Picture from OHEM table into Crystal Report using query

Hi expert
i had a query and which is attached to a crystal report, and its working fine,
the thing what i need is to bring the picture which is stored in OHEM table, (Employee Photo)
to the report. in the query i had attache the picture field. but not able to see it over the Crystal reprot
The below given is the query
select OHEM.empID,isnull(OHEM.firstName,'')+' ' +isnull(OHEM.middleName,'')+ ' '+isnull(OHEM.lastName,'')AS [Employee Name],
OHPS.name AS [Position],OUDP.Name AS [Department],OUBR.Name AS[Branch],OHEM.U_SponsName,OHEM.U_EMPOLD_ID,OCRY.Name AS [Nationality],
OHEM.U_JoinDate As [Joining Date (G)],OHEM.U_JoinDateH As [Joining Date (H)],OHEM.birthDate, (CAST(DATEDIFF(day,OHEM.birthDate,GETDATE())/(365) AS int)) As [AGE],(CAST(DATEDIFF(day,OHEM.startDate,GETDATE())/(365) AS int)) As [Year],
OHEM.startDate As [Emp Contract Start Date (G)],OHEM.U_CEDate As [Emp Contract End Date (G)],OHEM.U_ConType As [Emp Contract Type],
OHEM.U_ContDur AS [Emp Contrat Duration],OHEM.U_CRDate As [Emp Cont Renewal Date (G)],OHEM.U_IQId AS [Iqama ID],OHEM.U_IQIsDate As [Iq Issue Date (G)],
OHEM.U_IQExDate As [Iq Expiry Date (G)],OHEM.U_IQIsDateH As [Iq Issue Date (H)],OHEM.U_IQExDateH As [Iq Expiry Date (H)],OHEM.U_InsType As [Insurance Type],
OHEM.U_InsExpDate AS [Insurance Exp Date],OHEM.U_InsName As [Insurance Company],OHEM.U_DestiCity As [Destination City],
OHEM.U_TicketType As[Ticket Type],OHEM.U_TicketClass As [ Ticket Class], OHEM.U_TravelDate As [Travel Date],OHEM.passportNo,OHEM.U_PassportIsDate AS [Passport Issue Date],
OHEM.passportEx AS [Passport Expiry Date],OHEM.U_BSal As [Basic Salary], OHEM.U_HoAllow As [House Allowance],OHEM.U_TrAllow As [Transport Allowance],
OHEM.U_FoodAllow AS [Food Allowance],OHEM.U_CarAllow AS [Car Allowance],OHEM.U_OthAllow As [Other Allowance],OHEM.U_BonusAllow As [Bonus],
OHEM.U_VacStartDate1 AS [First Vacation Start Date], OHEM.U_VacEndDate As[ First Vacation End Date],OHEM.U_VacResDate As [First Vacation Resume Date],
OHEM.U_VacDur AS [First Vacation Duration],OHEM.U_VacStartDate2 As [Second Vacation Start Date],OHEM.U_VacEndtDate2 AS [Second Vacation End Date],
OHEM.U_VacDur2 As [Second Vacation Duration],OHEM.U_VacResDate2 AS [Second Vacation Resume],OHEM.U_VacStartDate3 AS [Third Vacation Start Date], OHEM.U_VacEndtDate3 As[ Third Vacation End Date],
OHEM.U_VacRestDate3 As [Third Vacation Resume Date],OHEM.U_VacDur3 AS [Third Vacation Duration],OHEM.U_VacStartDate4 AS [Fourth Vacation Start Date],
OHEM.U_VacEndDate4 As[ Fourth Vacation End Date],OHEM.U_VacResumeDate As [Fourth Vacation Resume Date],
OHEM.U_VacDur4 AS [Fourth Vacation Duration],OHEM.U_VisaDuration AS [Visa Duration],OHEM.U_VisaStartDate AS [Visa Start Date],
OHEM.U_VisaEndDate AS [Visa End Date],OHEM.U_VisaType As [Visa Type],OHEM.picture,OHEM.remark,OHEM.attachment,OHEM.mobile AS [Mobile],OHEM.homeTel AS [Residence Tele],OHEM.email AS [E-Mail] from OHEM
left outer join OHPS ON OHEM.position=OHPS.posID
left outer Join OUDP on OHEM.dept=OUDP.Code
left outer join OUBR on OHEM.branch=OUBR.Code
left outer join OCRY on OHEM.citizenshp=OCRY.Code
Pls suggest how to make it appear the photo in the crystal report
regards

Hi,
Please refer this how to guide which may give some idea for creation formula:
http://www.pioneerb1.com/wp-content/uploads/2012/04/How-to-work-with-Crystal-Reports-8.8.pdf
Thanks & Regards,
Nagarajan

Similar Messages

How to get data from MS CRM into Crystal Reports

Hello All,
Can anybody tell me how to get data into crystal XI reports with MS CRM.
Thanks in Advance
Ramesh

First you should refer to the Rules of Engagement and then add more info.
Start off by telling us what version of CR are you using and what is MS CRM?
Thank you
Don

How to bind the data from user table into user report

Hi All,
Please assist me to bind the data from user table into user report. I did create an user table with data and create a user report template (using Query Print Layout). How can I display my data into report format which I created before? Any sample program or document I can refer?
Platform: SAPB1 2005A
Add On Language: VB.Net 2003
Thanks.
rgds
ERIC

Hi Ibai,
Thanks for your feed back. I give you an example.
Let say now i wanna print employee list, so i will go
1. Main Menu -> Reports -> HR -> Employee List
2. Choose the Selection Criteria -> OK
3. Matrix will display (Employee List)
4. I can print the report click on print button
5. Printing report
My target
1. Main Menu -> Eric_SubMenu -> Employee List
2. Matrix will display (Employee List)
3. Print button
4. Print report
My problem
Now I would like to use my own report format. My own report format means I wanna add on my logo or do some customization within the employee report. So how I am going to do? I only able to display the employee list in matrix. How do I create a new report format and display it.
Thanks.
rgds
ERIC

How to open picture from my files into ps touch

How do I open a picture from my files into ps touch?

The "Touch" application forums are somewhere else.
Please find the appropriate forum here:
http://forums.adobe.com/community/creative_cloud_touch_apps/adobe_photoshop_touch
or here:
http://forums.adobe.com/community/photoshop_touch_for_phone

How to import pictures from Filesystem directly into subcatagory

Until now I import pictures via the File Menue into the "big pot". Then I try to find the files in this "big pot" and draw it by drag/drop into the desired catagory/sub - sub - sub ..... catagory. It is not easy to find such imported files among several 1000 pictures especially if they have different dates. So is it possible to import selected files directly from the filesystem into a subcategory.
Photoshop Elements 10 / WIndows 7
Regards Rainer

to import photos either use the iPhoto file menu ==> import command or drag the photos to the iPhoto icon in the dock
LN

How to retrieve data from xml file into obiee reports

Hi all,
I've got a situation here. A xml file is stored as blob in oracle database table. Now i need to retrieve data/info from that xml file into obiee reports. How am i supposed to proceed with this ?

I will go for a table function:
http://gerardnico.com/wiki/database/oracle/table_function
In two words, you can create a function that behave as a table. Then you create a function to pick up your xml, you parse it and you send back the rows.
I know that Oracle has also a library for XML files but I never use it until now.
Success
Nico

How to Fetch Data From Standard Table MARA and Display using BOPF ?

Hello All,
In BOPF creation of Quey to a node fetches data from the Data Base Table attached to that Node,
But in my requirement I have to fetch data Present in a Standard table and Display it in the FPM List Using FBI.
** Can we Fetch the data From Standard Table and fill the Node in BOPF, Is this possible as the standard Table do not contain KEY field which BOPF uses for Data Fetching ?
Kindly share your Idea's .
Thanks in Adv.

Hi Dhivya,
Thanks For your Response.
In my Requirement I want to make ROOT Node as Transient Node.
When I create a Sub Node to a Root Node, I am able to get this option to make this sub node as a Transient Node .
By selecting 'Standard<-->Extended' option in the Menu item 'GoTo' I am able to get this Transient Node check box field for the Sub Nodes.
I want to make a ROOT Node as a Transient Node.
(Which Version you are using, and which transaction you are using to create BO . we are using BOBX Transaction, Version Ehp 6 )
Kindly Guide me .
Thanks,
Kranthi Kumar.

How to get data from function module in crystal report

Hi,
I installed Crystal Reports 2008 and BO SAP Integration kit for CR.
I connected successfully to SAP system from CR but unable to get the data into Report ...
But data is present in function module.
Could you please tell me what may be the reason ...!!
Thanks
Raghavendra

Hi,
I connected successfully to SAP system from CR but unable to get the data into Report with all the Input parameters and data is present in function module.
Note: - If we take Start date as input parameter in Crystal report data is coming for single parameter, whereas we take input parameters like Partner function, Region and Customer - we are not getting data. (These fields we created parameters in Crystal report)
In Function Module IMPORT Parameters are below mentioned and Export parameter is Blank
                                                                                Start Date (Mandatory field)
                                                                                Partner Function (Mandatory)
                                                                                Region
                                                                                Customer
Please let us know if required any information.
Regards,
Raghavendra

How do you reference a textObject on a Crystal report using Java?

Hi,
Could someone please tell me the java statement to reference a textObject on a Crystal report. I am struggling to find the info in the docs and work out how the object model works.
My textObject on the report is called "VersionNumber" and I want to locate it on the report (I know it will be in the page footer) and then retrieve its value and change it.
I've managed to get a handle to the report using,
ReportClientDocument localDoc;
localDoc = getReport();
localDoc.open("rassdk://" + reportFile.getAbsolutePath(), OpenReportOptions._openAsReadOnly);
Any help would be much appreciated.
Regards
Rob.

I've found a way of referencing the textObject using the following line of java code (used in conjunction with the preceding code).
IReportObject iro = localDoc.getReportDefController().findObjectByName("VersionNumber");
I can put "iro" into a Watch (within Eclipse) and I can find the contents of the textObject there under the Paragraph tree, but I am now stuck with how to reference this within Java.
If anyone can help it would be much appreciated (and I will of course award points !)
Regards
Robert.

How to pass database login information to a crystal report using c#?

Hi,
I need to pass database logon information to a crystal report dynamically using c#. I am developing a windows application using c# .Net.
I looked some of the articles however I am not able to figure out the mistake I have did. Please find below the code I have written so far; It would be great if you could help me out in solving the issue.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.OracleClient;
using System.Configuration;
using CrystalDecisions.Shared;
using CrystalDecisions.CrystalReports.Engine;
private void Frm_report_Load(object sender, EventArgs e)
            setReportParameters(); // method to pass parameters to the Crystal report
            crystalReportViewer1.ReportSource = new Upper_Lower(); // Upper_Lower is the Crystal report I have used in my project
           TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
           TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
           ConnectionInfo crConnectionInfo = new ConnectionInfo();
           Tables crTables;
                crTables = new Upper_Lower().Database.Tables;
                crConnectionInfo.ServerName = "oops";
                crConnectionInfo.DatabaseName = "";
                crConnectionInfo.UserID = "new";
                crConnectionInfo.Password = "new123";
                foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in crTables)
                    crtableLogoninfo = CrTable.LogOnInfo;
                    crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                    CrTable.ApplyLogOnInfo(crtableLogoninfo);
Thanks & Regards,
Karthik.

Hi,
Try using this code ,
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using CrystalDecisions.Web;
        ReportDocument rd = new ReportDocument();
        rd.Load(Server.MapPath("Report name"));
        rd.SetDatabaseLogon("User Name", "Password", "Server Name", "Database Name");
        CrystalReportViewer1.ReportSource = rd;
[See Also.|http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm]
Hope this helps!!
Sincerely,
Nikhil Dharme

Access 2010 - How to display data from a table into a text box upon combo box selection?

Hi
I have a a table with 5 columns: month, year, USD, SGD, BAHT.
I created a form with a combo box for selection of the month and year, and I would like to set adjacent text boxes to show USD, SGD, BAHT information. How can i go about doing that?
From the Q&A here, most of them uses the function similar to this "=[Combo0].[Column](1)" to show the data in the text box, but this would require the combo box to list a whole bunch of details if i were to add in more currency values to the
table. Is it possible to not show this information in the combo box, but still populate data in the textboxes base on a selection on only the "month" and "year" in the combo box.

Hi,
According to your description, my understanding is that you want to show only the month/year in the combo box, we can choose the date, and it will display the value of USD/SGD/BAHT based on the month/year.
If it is, I recommend you try the steps:
Create a form based on your data source table>Add the combo box>combo box wizard>Find a record on my form based on the value I selected my combo box>Add mouth and year to selected fields
http://office.microsoft.com/en-us/access-help/create-a-list-of-choices-by-using-a-list-box-or-combo-box-HA010113052.aspx
If I misunderstand something, please let me know. We may upload some screenshots or a sample through OneDrive.
Regards,
George Zhao
TechNet Community Support

How to insert data from a table into itself if they don't already exist meeting a certain condition

First, let me apologize as I did not write/design this mess, just inherited this terrible design and legacy application!
I have table of companies and a table of suppliers with various attributes and of them being a bit column of is_public. The public suppliers then need to be inserted into the table as suppliers for the other suppliers.
As an example, in the company table company 'PUB01' is flagged as a public supplier (Company.IS_PUBLIC_SUPPLIER = 1). Therefore in the Suppliers table I need to insert a row for each each of PUB01's suppliers in that same table to all the other suppliers
in that table if they do not already exist as follows:
Here is a sample of the table structure:
CREATE TABLE [dbo].[COMPANY](
[COMPANY_ID] [nvarchar](15) NOT NULL,
[COMPANY_NAME] [nvarchar](100) NOT NULL,
[IS_PUBLIC_SUPPLIER] bit NOT NULL,
CONSTRAINT [PK_COMPANIES] PRIMARY KEY CLUSTERED
[COMPANY_ID] ASC
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[SUPPLIERS](
[SUPPLIER_ID] [int] IDENTITY(1,1) NOT NULL,
[COMPANY_ID] [nvarchar](15) NOT NULL,
[SUPPLIER_NAME] [nvarchar](100) NOT NULL,
[PUBLIC_SUPPLIER_ID] [int] NULL,
CONSTRAINT [PK_SUPPLIER_MASTER] PRIMARY KEY CLUSTERED
[SUPPLIER_ID] ASC
GO
Thanks!

Thanks Visakh! Will that work if some have already been inserted previously?
Yes
but if you want to exclude them use this
INSERT INTO Suppliers(Company_ID,Supplier_Name,PUblic_Supplier_ID)
SELECT s1.Company_ID,
s2.Supplier_Name,
s2.Supplier_ID
FROM Suppliers s1
CROSS JOIN Suppliers s2
WHERE EXISTS(
SELECT 1
FROM Company
WHERE Company_ID = s2.Company_ID
AND IS_PUBLIC_SUPPLIER = 1
AND s1.COMPANY_ID <> s2.COMPANY_ID
AND NOT EXISTS (SELECT 1
FROM Suppliers
WHERE Company_ID = s1.Company_ID
AND Supplier_Name = s2.Supplier_Name
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to bring footage from my DVD into FCP

Hi,
I REALLY need some help! I edited my film in FCP and burned in DVDSP, the same goes for the raw footage. They are both now on a DVD. My problem is that I let my friend borrow the raw footage tapes (bad mistake I know!) and now he cannot find the tapes. So I want to know if it is possible to take the raw footage back off the DVD without loosing any quality, and to bring it back into FCP? Thanks SO much for the help!

Without losing ANY quality? Sorry, quality was lost when you encoded for DVD. More quality will be lost when you rip the footage off the DVD, and more lost again when you encode again for DVD.
Sorry bud. Gotta press your friend more.
Shane

How to load a web page into crystal report

How can i load a web page into crystal report? pls help
Thanks in advance

Hi Sebastin,
You can't open a webpage in your Crystal Report, because all webpages will be executed in browser only. If you insert any webpage link in any documents it will not open in the same document, it will open in browser.
Hope this will help you
Thanks,
Sastry

Help required in embedding flash file object into Crystal Report file.

Hello,
      I use the default version of Crystal Report (i.e.'Crystal Report Basic For Visual Studio 2008 - version 10.5' ) which is the part of 'Visual Studio 2008', to create and display the Report. Further, as a requirement, I have to show 'Event Video' into the Report. But, as this default version of Crystal Report does not support Flash File, I uninstalled it and downloaded and installed the 30 days trial version of the Crystal Report (i.e. Crystal Report 2008 - version 12.0).
      Then, I created a new Crystal Report File using 'Crystal Report 2008 Designer', embedded the video as a Flash File(i.e. SWF file) into it. Now, when I add this newly created Crystal Report File into my sample application, which is created using VS 2008, it does not shows the embedded video.
      So, can anybody please tell me, how can I embed the Flash File into Crystal Report, so that it will be visible in the sample application?
I would like to appreciate your help and support.
Thanks,
-Yogesh.

Symptom :
When embedding a pdf document into a Crystal Report, only the one page shows.
Reproducing the Issue
Environment:
Crystal Reports OLE object
Cause
An OLE object only displays the first page.
Resolution
Embed multiple objects, one for each page
Or
Use a hyperlink to the object instead
Hope this helps!
Regards,
Vinay

How to bring Picture from OHEM table into Crystal Report using query

Similar Messages

Maybe you are looking for