"How to...BSP display comments"...Blocking all components below

After implementing the white paper, I found all components below the BSP inserted are no longer visible. Tried a few things in vain. Am I missing something?
We are on 640 sp 14 so both notes are already in.
Thanks.
William
Message was edited by: William Lee

Thanks Natarajan. however we don't see the same issue when using iframes to incorporate web reports in web planning applications.
In the white paper it says "in the place where you want it be displayed". does this mean "anywhere you want as long as it is at the end"?
anyone with a solution?
william

Similar Messages

How can I display content blocked by an invalid security certificate?

I am using Firefox 30.0 which I installed to replace IE8. I log in to my health insurance site. When I try to go to the Provider Directory Search (PDS), nothing happens. I thought the PDS might be a pop-up so I tried both making the web page a pop-up exception and then also just turning the pop up blocker off completely. Neither helped.
I then tried to access the same PDS page via IE8 and IE8 displayed a “Content was blocked because it was not signed by a valid security certificate” error page. Also, IE8 displayed a bar with options that allowed me to display blocked content regardless of the status of the security certificate. The PDS page then displayed.
I went back to FF30 and tried again. The PDS page did not display and no error message nor options bar was displayed. Next, I tried finding an option related to this problem. Options/Security had nothing for Security Certificates. Options/Advanced/Security seemed to deal with security certificates my copy of FF30 would provide to web sites and not the web sites certificates provided to me. I tried clicking on the “lock” icon of the page from which I should be transferred to the PDS page. The security certificate information displays but I could not see any option that would help me and this is the security certificate from the previous page anyway and not the PDS page that is being blocked.
If I could just get a Security Certificate error to display, I was hoping I would then be given the option of displaying the blocked content anyway. Without even an FF30 error condition being displayed (as does IE8), I am unable to proceed.
Ideas about what to try would be greatly appreciated. Thanks, Claude

You can inspect the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/

"How to...BSP display comments"...problem with row comment

Hi all,
After implementing as recommended, I noticed that only comment captured at the 'cell' level of detail are returned (via web layouts). Documents captured using the Row' setting are not available via the embedded BSP.
The reason, it seems, is that 'row' comments do not have 0AMOUNT attached to the document properties. The soluion reads all documents with a char and key fig cross section based on a level/package definition, and this may be the problem.
A level/package in BPS0 always needs a key figure (0AMOUNT in my case)....and therefore the "How to.." solution is most likely looking for all documents that have 0AMOUNT, but it is the WIB setting of 'row' that ensures that web-captured documents do not have 0AMOUNT attached.....?
Marc, does this sound correct? Any ideas how to get around the problem without..?
Thanks and regards,
Rael and Natarajan

Hi,
This How-to paper is exactly what I was looking for, so thats perfect. However I'd like to display to row comments as well, but it does not seem to work. As far as I can tell, you haven't updated the white paper yet, Marc. Is that correct? What changes do I exactly need to make it work for row comments as well?
Thanks in advance,
-Jacob
UPDATE!
Ok, I found the place to comment out.
On the tab Event Handler -> OnInitialization - comment out the following line:
ls_cha-chanm = cl_sem_mp_documents=>c_name_keyf.
That seems to do the job.
Thanks again,
-Jacob
Message was edited by: Jacob

How can I display comments when using poll

hi Experts,
I am using wc11.1.1.5 with poll function, I published a poll with some questions and a text box for suggestion feedback, when I check result, I can only get answers for the question but no suggestions can be displayed, how can I get the suggestion displayed?
Best regards

You have to customize surveyResults.jsff page fragment that is available in "WebCenter Polls and Surveys Service View" library. You can find this library by creating a WebCenter Spaces Task flow Customization project from Jdeveloper. Kindly do let me know if you need more details in this regard.
You have add output or label in surveyResults.jsff and then map its value attribute with RE of suggestion text area might be available in surveyResultBean class.
How to customize task flow, pls see following link:-
http://download.oracle.com/docs/cd/E21764_01/webcenter.1111/e10148/jpsdg_taskflows.htm#BACIEGJD

How to set the background for all components?

hi
Does anybody know how to set the DEFAULT background color in an application.. I need it because in jdk 1.3 the default bgcolor is grey and in 1.5 it is white.. and I wish white as well.. so to make it also white in jdk 1.3 I need to use the (a bit annoying) anyContainer.setBackground( Color.white ); and these are lots in my app.. So my question is: is there such an overall class with a function (say UIManager.setComponentsBackground( Color color ) ) for such a purpose?
any tip or link would be greatly appreciated

Does anybody know how to set the DEFAULT background color in an applicationthis might get you close
import java.awt.*;
import javax.swing.*;
import java.util.Enumeration;
class ApplicationColor extends JFrame
public ApplicationColor()
    setApplicationColor(Color.RED);
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel jp = new JPanel(new BorderLayout());
    jp.add(new JTextField("I'm a textfield"),BorderLayout.NORTH);
    jp.add(new JComboBox(new String[]{"abc","123"}),BorderLayout.CENTER);
    jp.add(new JButton("I'm a button"),BorderLayout.SOUTH);
    getContentPane().add(jp);
    pack();
public void setApplicationColor(Color color)
    Enumeration enum = UIManager.getDefaults().keys();
    while(enum.hasMoreElements())
      Object key = enum.nextElement();
      Object value = UIManager.get(key);
      if (value instanceof Color)
        if(((String)key).indexOf("background") > -1)
          UIManager.put(key, color);
public static void main(String[] args){new ApplicationColor().setVisible(true);}
}

How to add a screen in CC02 & how to avoid displaying comment pop up

Hi Experts,
I have a requirement wherein I need to add a screen that will consist of a drop down so that user can select the approvers to approve the ECR in transaction CC02.
& at the same time I need to avoid displaying the pop up that is shown while putting digital signature for approving the ECR.
Could you please tell me which screen-exits to be used in this regard.
points will be rewarded for the answer.

Hi,
you can use the enhancement PCCD0001.
Regards
Kiran sURE

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Displaying 3 blocks in a report

hi
please tell me how can i display 3 blocks in a report by using reuse_alv_list_display.
thanks & regards
sekhar rao

Hi Sekhar ,
You can use Functin module 'REUSE_ALV_BLOCK_LIST_DISPLAY".
With the help of these you can display more than one block at a time...
Hope this helps you..
Thanx,
Navin...!

How do you print comments on one page

I can't figure out how to get comments to print continuosly rather than one comment per page. I have a 30 page PDF with comments on each page. I don't want to print out 30 pages. I just want them to print on x pages as if it were a word doc. Most comments are short. Printing one minor edit per page is driving me nuts.

Here's a link to a forum discussionthat includes a script: http://acrobatusers.com/content/how-do-i-print-comments-summary-all-one-page-0

Modal dialog limiting the mouse pointer and blocking all application

I wanted to create a modal dialog that blocks all application in my desktop. Only password field be present and exits only if correct password is typed. I also wanted to limit the mouse pointer within the window of the modal dialog. Will that be possible? i have read modality feature of Mustang(beta) and notes there that system modality is not included. Can anybody there give me an idea how to do tricks on blocking all applications of the desktop? I will be much grateful to anybody who could solve this problem. Thnx in advance...

tnx Sarcommand ..i give up on that, i understand the risk if that feature is included..
all i wanted is to make an internet cafe client/server that blocks the client's pc interaction if log time is reached.blocking only the keyboard and mouse.
i have seen so many softwares sets the cursor position within the dialog bounding box only with user and password there. though my other application runs the mouse is still captured on the dialog even the dialog lost focus.
if that would not be possible I'll just send notification to the client, a dialog that does not block any application.
now, im going to try if the client can do som action whenever the server sends alert if the client java app is not the focus. i will post next time what hapens.but if you tried already, if u dont mind posting it so others could know it also..
tnx so much Sarcommand..

How to display a block next to another bock in a selection screen?

Hi,
I want to show several blocks in a selection screen, but they are displayed one below the other. How can I display them parallel?
My Coding:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 NO INTERVALS.
*parameters
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001 NO INTERVALS.
*parameters
SELECTION-SCREEN END OF BLOCK b2.

use like following in Report :
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SESSION RADIOBUTTON GROUP CTU. "create session
SELECTION-SCREEN COMMENT 3(20) TEXT-S07 FOR FIELD SESSION.
selection-screen position 45.
PARAMETERS CTU RADIOBUTTON GROUP CTU.     "call transaction
SELECTION-SCREEN COMMENT 48(20) TEXT-S08 FOR FIELD CTU.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S01 FOR FIELD GROUP.
selection-screen position 25.
PARAMETERS GROUP(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) TEXT-S05 FOR FIELD CTUMODE.
selection-screen position 70.
PARAMETERS CTUMODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'.
                                      "A: show all dynpros
                                      "E: show dynpro on error only
                                      "N: do not display dynpro
SELECTION-SCREEN END OF LINE.

How to wait until all components painted?

Hi - I have searched for hours for an answer to this and have yet to find something so any help is much appreciated!
Ive posted some code below to simulate the problem im facing. This is a simple frame which has a couple of custom jPanels embedded within it.
When this is run, the first 3 lines i see are:         I want this comment to be the last thing output
        Now finished panel paint
        Now finished panel paintBut, as this output suggests, i want the "I want this comment to be the last thing output" line to be displayed after the two panels are completely painted on the screen (in real life i need to know my components are displayed before the program can move on to further processing). Of course, if you cause a repaint you see the "now finished panel paint" each time, but im not interested in this, im simply interested in how to overcome this when the frame is first created and shown.
Ive tried everything i can think of at the "// ***** What do i need to put here? ******" position but nothing seems to work... In short my question is how can i construct my frame and get it to ensure that all components are fully displayed before moving on?
Sorry if the answer to this is obvious to someone who knows these things, but its driving me mad.
Cheers
import javax.swing.*;
import java.awt.*;
public class Frame1 extends JFrame {
public static void main(String[] args) {
    Frame1 frame1 = new Frame1();
    // ***** What do i need to put here? ******
    // to ensure that the System.err.. call below
    // is only executed once both panels paint methods
    // have finished?????
    System.err.println("I want this comment to be the last thing output");
    System.err.flush();
public Frame1() {
    this.getContentPane().setLayout(new FlowLayout());
    MyPanel p1 = new MyPanel(); p1.setBackground(Color.red);
    MyPanel p2 = new MyPanel(); p2.setBackground(Color.green);
    this.getContentPane().add(p1, null);
    this.getContentPane().add(p2, null);
    this.pack();
    this.setVisible(true);
class MyPanel extends JPanel {
    Dimension preferredSize = new Dimension(200,200);
    public Dimension getPreferredSize() { return preferredSize; }
    public MyPanel () { }
    public synchronized void paintComponent(Graphics g) {
      super.paintComponent(g); //paint background
      // do some irrelevant drawing to simulate a bit of work...
      for (int i=0; i<200; i+=20) {
        g.drawString("help please!",50,i);
      System.err.println("Now finished panel paint"); System.err.flush();
    } // end of MyPanel
}

Thanks both for your replies.
When doing the "Runnable runnable = new Runnable(){public void run(){ frame1.paint(frame1.getGraphics());....." method i sometimes see
    Now finished panel paint
    Now finished panel paint
    I want this comment to be the last thing output
    Now finished panel paint
    Now finished panel paintwhich is a pain.
As for making a new Runnable to do the system.err.println and then doing the SwingUtilities(invoke) on that runnable, that didnt work for me at all.
So... in the end, my solution was to have the paint method set a boolean when finished and the main program sleep while this is false
     // Dont want to sleep for say a few seconds as cant be sure
     //painting will be finished, must monitor state of painting ...
     //therefore use while loop
     while (!isOk) { // isOk is true when both panel paint methods complete
         System.err.println("Waiting......");
         try{   Thread.sleep(300 /* wait some time */); }
         catch(Exception e){}
       System.err.println("Thankfully this works");which is a kind of mixture of both your suggestions i guess!
Thanks for your help, much appreciated.

How to Download displayed output to Excel Using Bsp Application

Hi Experts,
please give me some idea because I am New In BSP.
How to Download displayed output to Excel Using Bsp Application.
If any sample code please do send me.
In my condition I am getting data in 2-3 table view formats on one page and i want download that in Excel.
please help me.
Regards & Thanks,
Yogesh

Hi,
This is more a question for the BSP forum.
Anyway, as such it's realy easy since you can use HTML in order to import to Excel. All you need to do is add
runtime->server->response->set_header_field( name = 'Contnet-Type'
value = 'application/vnd.ms-excel' ).
runtime->server->response->delete_header_field( name = 'Cache-Control' ).
runtime->server->response->delete_header_field( name = 'Expires' ).
runtime->server->response->delete_header_field( name = 'Pragma' ).
Also check threads like
Download BSP data into Excel
export bsp-table to excel
Export BSP Table to Excel
Eddy
PS. Reward useful answers and earn points yourself

How we can display two list if not using blocked alv ,not scr painter

how we can display two list if not using blocked alv ,not scr painter

1. Once the cell number/service on the 3GS is transfered to the 5, the 3S will become basically an iPod touch until a new sim is in place, correct? We can still use wi-fi and the apps on the phone, and still be able to sync to iTunes, correct? iOS has been upgraded to 6.
1a. With a new Sim, any issue with losing any data/apps on the phone? I dont' think so.
1. Yes. without a sim it has no service, but all other features should be useable normally.
1.a Nope, Data and Apps are independent of the Sim.
2. Once the 5 is activated on the new carrier, how do I share the apps within iTunes? Is it as easy as using iCloud (which we haven't "activated" yet) and/or plugging both phones into iTunes and transferring between devices (authorizing both)? Photos? There are photos on the 3S that we will need on the 5.
2. As long as both Phones use the same Apple ID, the applications can be synced to each through iTunes. Also any downloads on one phone should appear in the other. Again as long as both phones are using the same Apple ID.
3. Reverse order for new apps purchased (understand that not all the iphone 5 apps will work on the 3GS)?
3. If they can be run on the iPhone3GS they should be synced automatically.
4. My husband also has a new iPad, any complications there with three devices? To date, he has not "shared" apps between his 3S and the iPad. He does not have iCloud set up, but plugs into his computer to backup and transfer photos.
4. If all 3 Devices share the same Apple ID all should be synced.
As a word of warning, if all 3 devices use the same Apple ID, messages recieved using iMessage will appear on all 3 devices.
And Conctacts may get overwritten if synced to iCloud (thogh you say he doesn't have one), or merged together.

How can I automatically prepend comment blocks to stored procedures?

How can I automatically prepend comment blocks to stored procedures?
In my organization, the standard is to comment all stored procedures with a comment block that looks like this:
/*-- =============================================
-- Created by: <Owner>
-- Created date: 01/08/2012
-- Purpose: Inserts new setting value, code and description
-- Modifications:
-- Modified by: <Owner>
-- Modification date: 01/08/2012
-- Purpose: Inserts new setting value, code and description
-- =============================================*/Thanks.
select * from v$version;
BANNER
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE     11.2.0.2.0     Production Edited by: xDeviates on 01-ago-2012 7:37
Edited by: xDeviates on 01-ago-2012 8:31

Hi,
If I want to write a package called pk_fubar, I copy the following script and call it fubar.sql
--     ========== package_name.sql starts here ==========
--     Package_Name.sql
SPOOL     &home_dir\package_name.lst
PROMPT     .     H   H EEEE     A    DDDD
PROMPT     .     H   H E       A A   D   D
PROMPT     .     HHHHH EEE    A   A D   D
PROMPT     .     H   H E      AAAAA D   D
PROMPT     .     H   H EEEEE A   A DDDD
@@package_name_head
PROMPT     .     BBBB    OOO   DDDD   Y   Y
PROMPT     .     B   B O   O D   D   Y Y
PROMPT     .     BBBB   O   O D   D    Y
PROMPT     .     B   B O   O D   D    Y
PROMPT     .     BBBB    OOO   DDDD     Y
@@package_name_body
SPOOL     OFF
@@package_name_test
-- EXIT
--     ========== package_name_head.sql starts here ==========
CREATE OR REPLACE PACKAGE     pk_package_name
AS
FUNCTION     sign_in
(     in_user_name     IN     VARCHAR2
,     in_password_txt     IN     VARCHAR2
RETURN     PLS_INTEGER
END     pk_package_name;
SHOW ERRORS;
GRANT     EXECUTE     ON pk_package_name     TO schema_name_some_role;
--     ========== package_name_body.sql starts here ==========
CREATE OR REPLACE PACKAGE BODY     pk_package_name
AS
-- Procedures related to SCHEMA_NAME ...
-- 2012 July 23 -- Package started with proc_x. (Frank Kulash)
--     **   local procedures and variables   **
--     **   x   **
--     **   initialization section   **
--     The following code is executed once per session, when the package is loaded.
BEGIN
     set_var     ( 'DT_FMT_TXT'
          , 'YYYY-MM-DD HH24:MI:SS'
END     pk_package_name;
SHOW ERRORS;
--     ========== package_name_test.sql starts here ==========
--     PACKAGE_NAME_TEST.SQL -- Test procedures in schema_name.pk_package_name
SET     DOCUMENT     OFF
SET     SERVEROUTPUT     ON     SIZE     10000
ALTER SESSION     SET NLS_DATE_FORMAT = 'DD-Mon-YYYY HH24:MI:SS';
SPOOL     @@package_name_test.lst
PROMPT
PROMPT     ***********************
PROMPT     ** Testing x **
PROMPT     ***********************
PROMPT
SPOOL     OFFThen I replace package_name with fubar, and schema_name with the actual schema name. Finally, I cut off parts from the end to create fubar_test.sql, fubar_body.sql and fubar_head.sql. You could easily include a multi-line procedure comment template in this script. Every time you add a procedure or function, ciopy and paste that comment template, and then modify the copy.

"How to...BSP display comments"...Blocking all components below

Similar Messages

Maybe you are looking for