How to build a TestStand 2012 workspace ( insert a project / insert a folder) programmatically using LabVIEW 2012 and the TestStand API.
Hi everybody!
I am just trying to find out how to create a TestStand workspace … in LabVIEW using the TestStand API.
To create a new workspace was quite easy. Unfortunately I am not successful to insert a new or existing project to the workspace.
Furthermore I have to insert a folder from disk to the new or existing project in the way that I can use an absolute path for the directory …
Maybe someone had already solved this problem, in any case I am thankful for any hint.
Greetings from Germany,
Norbert
Have you find out how to add a folder to a project? I'm looking for this to... I tried WorkspaceObject.NewFolder[Name]whitout success...
For creating Workspace and project see the newer resolved thread I created.
Martin
Similar Messages
-
Hi, I'm trying to export data to a spreadsheet from an Agilent 8510c to a laptop(Win XP) using a PCMCIA-GPIB card, Labview 6 and the VI from the NI site. How do I do this? Ideally I'd like the Magnitude and Phase Data, as pairs for each frequency point, but the Real and Imaginary pairs can work just as well. Any help would be greatly appreciated.
When you say the "VI from the NI site", I'm going to assume that you mean the HP8510C driver. If that's the case, then VI called HP8510C Application Example should be your starting point. It returns two 1D arrays - real raw data and imaginary raw data. These can be combined with a Build Array function and the resulting 2D array can be wired to the Write to Spreadsheet File function. This will create a tab or comma separated file that Excel or any other spreadsheet program can import. The very simplest program would look something like the attached picture. You may need to modify the instrument program to suit your requirements but this should get you started.
Attachments:
HP8510C_and_Spreadsheet_Write.jpg 5 KB -
How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.
The following has instructions: OS X Mavericks: Share your Internet connection
-
How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.
i'm not quiet sure atm but should normally work like this:
connect to itunes store -> log out with ur account (upper right corner where ur apple id is displayed) -> sign in with ur wifes apple id -> activate computer (store->activate this computer)
normally it should work this way but ur wife wont be able to use apps or music within itunes library purchased with the other apple id -
How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.
Hello and thanks for the answer.
I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
Enter the following information in the fields:
Server: google.com
User Name: Enter your full Google email address
Password: Your Google account password
Select Next at the top of the screen to complete the setup.
After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
Additional Information
Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done. -
I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?
If I recall, CTRL-D is EOF on most ASCII tables.
You'd probably have to use an escape sequence
or if you can use an unsigned 8-bit that might be
easier.
In article <[email protected]>, TLS
wrote:
> How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
> format) out the serial port of my computer?
>
> I am trying to write a vi that interfaces with a piece of OEM
> equipment that is set up to talk with a VT 100 terminal. I can't seem
> to locate the ASCII equivalent string (if there is such a thing) of a
> CTRL D. Is there a vi that emulates VT 100 commands? -
I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.
Here is how to use the PLL. But I don't know of how to interact with that device
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
Sam S
Applications Engineer
National Instruments -
Hello
I have a problem in calculating the apple id Can you help me please
I forgot answer security questions for your account How can knowledge
Please help
Please reply as soon as possible
I can not buy from camels Store
And the rest of the account balance $25
Message was edited by: lingo azamI think you mean App Store.
Rescue email address and how to reset Apple ID security questions -
how do i move my music from my old iphone to my new iphone if i have icloud and the music i have is downloaded from my phone?
Old Phone to New Phone
http://support.apple.com/kb/HT2109
cereed wrote:
how do I move my music from my old iphone to my new iphone?
Sync your New Phone to the computer you Usually Sync with...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
Download Past Purchases > http://support.apple.com/kb/HT2519 -
How to build a measurement system using NI products and the system is outside PC
I would like to build a system that uses NI's following products:
1. Wave form generator
2. Switches
3. A/D board
My question is: How to build such a system such that
the system is outside PC? For example, the system is
like an ordinary instrument that can be connected to
PC through RS 485 port.
Thanks!If you are planning on using SCXI, you have two options. You can still use the PXI-1000B chassis, and you will need to connect your DAQ board to the SCXI system with a cable.
You can also consider using a PXI-1010 or PXI-1011 chassis. We call them combo chassis because they come with some PXI slots and they have an SCXI chassis attached to them. In this chassis, you can connect your DAQ board in the PXI slot closest to the SCXI chassis, and the DAQ board will communicate with the SCXI chassis through the internal PXI backplane, so you will not need to connect them through a cable. The PXI-1010 chassis has 8 PXI slots and 4 SCXI slots, and the PXI-1011 chassis has 4 PXI slots and 8 SCXI slots.
The MXI-3 extender will let you control any PXI chas
sis from a desktop. Keep in mind that there are two interfaces: the PCI-PXI-8330, which uses a copper cable, and the PCI-PXI-8335, which uses a fiber optics cable. The advantage of the fiber optics cable is that it is less likely to have noise and the PXI chassis can be up to 200 meters away from the computer.
Now, given that your signals have a 150V amplitud, you will need a SCXI-1127 module instead of a PXI-250x.
Finally, we do not have an amplifier in PXI form that can read a 50 KHz - 300 KHz and peak voltage 5v, and amplify it to 120v. However you could check other PXI vendors for those boards. You can find some information of third party vendors by going to the NI Developer Zone and clicking on the Third Party Product Advisor link on the left.
Hope this helps,
Claudia Lorente
Applications Engineer
National Instruments -
How to use labview to control the horizonal menu of TDS420A?
Hellow!
anyone can tell me how to control the horizonal menu of TDS 420A osilloscope? currently,i use "TKTDS 420A config.Horiz.VI and TKTDS readwaveform.VI to control the horizonal menu,i would like to control the delay time to get a specific part of the whole waveform,but it doesn't work,attached is a example,anyone can tell me the reason? thanks!
Attachments:
example.vi 54 KBYour vi won't load on our machines without the TDS' driver. If you "Save with options" as a "Development Distribution" it should include the required sub-vi's. The be sure and "zip" the resulting .llb file to reduce its size.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
Using LabVIEW Packed Library within TestStand Deployment Tool
I am wondering what could be the interest of generating Packed Library within the TestStand Deployment Tool since the sequences using these VIs will not be able to find the dependant VIs included into the build Packed Library on the deployment target.
Any experience using Packed Library within TestStand Deployment Tool ?
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005)Jiggawax,
Sorry for the confusion,
My question concerns the developement of Custom Step Types.
For example, within a project or as an independant product.
The best practices is to avoid using main module when developing CST in order to preserve evolutivity (main module calling paramters are copied within CST instances and could need prototype updating). I prefer using PostStep (as NI does for its own CST).
Thus, when creating the CST palette, I have to configure the EditStep and the PostStep and define each VI call.
If I want to distribute these VIs through a .lvlibp, then I need to build a .lvlibp very early and use it within my CST palette.
This .lvlibp will be used on deployed benches and may not contain VI diagrams and debug options (best performance).
But during the development of my CSTs, if I need to debug the VIs called when using CST whitin a sequence, and if I don't want to change the called VIs defined in my CST palette, then I need to regenerate this .lvlibp with debug option (different from the deployment .lvlibp) in order to allow debug.
May be it could be interesting that the TestStand deployment tool take into account SubSteps when selecting the Packed Library option. This tool is able to modify sequences, it could be able to change also palette configuration file.
This will allow to have only two levels :
> Source and Debug (VIs)
> Deployment (.lvlibp)
instead of three :
> Source (VIs)
> Debug (.lvlibp with debug option)
> Deployment (.lvlibp)
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005) -
How to generate PDF using FDF file and the PDF form template (PHP)
Hi Folks,
I'm really sorry that I couldn't follow all the valuable discussions going on here, regularly. I need some immediate help.
I NEED A PHP SOLUTION. I'm able to generate FDF files using the PDF Form Template in PHP. So, I have a collection of FDF files, which seeks the PDF template, while opened and populates the template with FDF data. Now if I need to save this PDF file, I have to do it manually clicking SAVE option. But, I need to convert FDF to PDF in bulk. So, I need some PHP based solution. The PHP script takes the PDF template and the FDF file and merges them to generate a complete populated PDF file. I know it's possible, but don't know how. I've seen Adobe FDF Toolkit. But by default it doesn't show any guideline for PHP. Please help me to write this code. I'm a professional coder. I can understand your hints and tutorials. PLEASE HELP GOOD PEOPLE.The only reason I am responding to this post is because the poster sent me a request through the forum message system asking for my help.
Although I did populate PDFs with FDF data generated by web forms a year or so ago, I have since abandoned that kind of solution. It was a big headache. I found it far more stable and flexible to use html, php and css to populate forms that are almost as nice looking as PDFs.
So my advice is, if you can possibly avoid going the FDF/PDF route, you will be better off. -
hello can i please get some help, my stepdad used to use my phone a while ago, i deleted his old account from my phone, last night out IMessages merged without us knowing how it happened, he is able to read any messages that are coming into my phone through IMessage and also i am able to read his and this is happen from two different phone, i dont know how to fix this or two separate the two accounts, is anyone able to help please
Settings>Messages Send and Receive should only have the phone number and addresses checked that you want reaching that individual devices If your step-dads number and email are checked just tap them it will remove the check.
-
Need Expert's Advice - How to use LabView Efficiently and to increase Readability
My application is fairly complex. It is a real world testing applications that simultaneously controls 16 servo motors running various stress testing routines asynchronously and all at the same time. The application includes queues, state machines, sub VI's, dynamically launched VI's, subpanels, semaphores, XML files, ini files, global variables, shared variables, physical analog and digital interfaces and industrial networking. Just about every technique and trick that LabView 2010 has to offer and the kitchen sink as well.
Still I am not happy with the productivity that LabVIEW 2010 has provided, nor the readability of my final product.
Sometimes there are too many wires. Much of my state machines have a dozen or more wires just going from input to output, doing nothing, just because one or two states in the machine need that variable in some state. Yeah, I could spend alot of time bundling and unbundling and rebundling those values, but I don't think that would improve things much.
We have had a long discussion about the use or misuse of Local variables in this forum and I don't want to repeat that here. I use them sparingly where I think it is relatively safe to do so. I also have a bug whenever I try and copy some code that contains one or more local variables. On Pasting the code with local variables, the result is something other than what I expected, I am not sure what. I have to undo the paste and rebuild the code one object at a time.
I am also having trouble using trouble using Variable Property Nodes. When I cut and paste them, they often loose their reference object and I have to go back into the code and redo the Link To on each one. That wastes alot of time and effort.
Creating subVIs is often not appropriate when the code makes many references to objects on the Front Panel. Some simple code will turn into a bunch of object references and dereferences which also tends to take alot of work to clean up and often does not help overall readability in many cases. I use subVIs when appropriate, but because of the interface overhead, not as often as I would like to. My application already has over 150 sub VIs.
The LabView Clean Up Diagram function often works poorly. It leaves way too much empty space between objects, making my diagrams 3 to 4 24" screens wide. That is way too much and difficult to navigate effectively. The Clean Up function puts objects in strange places relative to other objects used nearby. It does a poor job routing wires and often makes deciphering diagrams more difficult rather than easier.
My troubleshooting strategies don't work well for large diagrams and complex applications. The diagrams are so complex that execution highlighting may take 20 minutes for a single pass. Probes help, but breakpoint aren't of much use, because single stepping afterwards often takes you to somewhere else in the same diagram. I can't follow the logic well doing this.
Using structures, I may have Case structures nested 5 to 10 levels deep inside some Event Structure inside a While Loop. Difficult to work with and not very readable.
All and all, I can make it work, but I am not happy about the end result.
I am hoping to benefit from some expert advice from those that are experienced in producing large complex applications efficiently, debugging efficiently and producing readable diagrams that they are proud of.
Can anyone offer their advice on how best to use the LabView features to achieve these results in complex applications? I hope that you can help show me the light.I'm not an expert but I'm charged out as one at work.
I am off today so I'll share some thoughts that may help or possibly inspire others to chime. I have tried to continually improve my code in those areas and would greatly welcome others sharing their approaches and insights.
Note:
I do refactoring services to help customers with this situation. What I will write does not represent what we do in a code review since our final delverable is a complete final design and that is beyond the scope of this reply.
I'll comment on your points.
dbaechtel wrote:
My application is fairly complex. ...
While watching Olympic figure skating competion slow-motion replays, I learned how the subtleties of how the launching skate is planted while entering a jump can make the difference between a good jump and a bad one.
In software, we plant our foot when we turn from the design to the development. I have to admit that there where a couple of times when I moved from design to development too early and found myself in a situation like you have described.
How to know when design is done?
Waterfall says "cross every 't' and dot every 'i' " while Agile says "code now worry about design latter" and Bottom-up "says "demo working why bother designing" (Please feel free to coment on these over-simplifications gang).
My answer is not much more helpful for those new to LabVIEW.
My design work is done when my design diagrams are more complicated than the LabVIEW diagrm they describe.
dbaechtel wrote:
simultaneously controls 16 servo motors running various stress testing routines asynchronously and all at the same time. The application includes ...and the kitchen sink as well.
Have you posted any design documents you have? These will help greatly in letting us understand your application. More on diagrams latter.
Anytime I see multiple "variations on a theme", I think LVOOP (LabVIEW OOP ) . I'll spare you the LVOOP sales pitch but will testify that once you get your first class cloned off and running as a sibling (or child) you'll appreciate how nice it is to be able to use LVOOP.
Discalimer:
If you don't already have an OOP frame of mind, the learning curve will be steep.
dbaechtel wrote:
Still I am not happy with the productivity that LabVIEW 2010 has provided, nor the readability of my final product.
Sometimes there are too many wires....going from input to output, doing nothing,... spend alot of time bundling and unbundling and rebundling those values, but I don't think that would improve things much.
Full disclaimer:
I used to be of the same opinion and even used performance arguements to make my point. I have since, changed my mind.
Let me illustrate (hopefully). This link (if it works for you, use lefthand pane to navigate hierachy) shows an app I wrote from about 10 years ago when I was in my early days of routing wires. Even the "Main" VI started to suffer from too many wires as this preview from that links shows.
Clustering related data values using Type Definitions is the first method I would would urge. This makes it easier to find the VIs that use the Type def via the browse relationships>>>callers. If I implement my code correctly, any problem I believe is associated with a particualr piece of data that is a Type def has to be in one of the VIs that use that type def therefore easier to maintain.
When I wrote "related data" I am refering data normalization rules (which my wife knows and I picked-up from her and I claim no expertise in this area) where only values that are used together are grouped. E.G. Cluster named File contains "Path" and "Refnum" but not "PhaseOfMoon". This works out nicely with first creating sub-VI since all of the data related to file operations are right there whe I need it and it leads into the next concept ...
When I look at a value in a shift register on the diagram taking up space that is only used in a small sub-set of states, I concider using an Action Engine . This moves the wire from the current diagram into the Action Engine (AE), and cleans up the diagram. The AE brings with it built-in protection so provided I keep all of the opearations related to the the Type def inside the AE I am protected when I start using multiple threads that need at that data (trust me, it may not make a difference now but end users are clever). So that extra wire is effective encapsualted and abstracted away from the diagram you are looking at.
But I said earlier that I would not sell LVOOP so I'll show you what LVOOP based LV apps look like to contrast what I was doing ten years ago in that earlier link. This is what the top level VI looks like.
And this is the Analysis mode of that app.
I suspose I should not mention that LVOOP has wizards that automatically create the sub-VI (accessors) that bundle/unbundle the clusters, should I?
Continuing...
dbaechtel wrote:
We have had a long discussion about the use or misuse of Local variables...I also have a bug whenever I try and copy some code...
If you can simplify the code and duplicat ethe bug. please do so. We can get it logged and fixed.
dbaechtel wrote:
I am also having trouble using trouble using Variable Property Nodes....
That sounds like a usage issue. Posting code to illustrate the process will et us take a shot at figuring out what is happening.
dbaechtel wrote:
Creating subVIs is often not appropriate... My application already has over 150 sub VIs.
"Back in the day..." LV would not even try to create a sub-VI that involved controls/indicators. I use sub-VIs to maintain a common GUI often but I do it on purpose and when I find myself creating a sub-VI that involves a control/indicator, I hit ctrl-z immediately!
I figure a way around it (AE ?) and then do the sub-VI.
Judging by your brief explanation and assuming you do a LVOOP implementation, I would estimate that app need 750-1500 VIs.
dbaechtel wrote:
The LabView Clean Up Diagram function often works poorly....
THe clean-up works fine for how I use it. After throwing together "scratch code" and debugging the "rats nest" I'll hit clean-up as a first step. It guess good enough on simple digrams and in some cases inspires me to structure the diagram in a different way that I may not have thought about. If I don't like, ctrl-z.
Good deisgn and modualr implementaion led to smaller diagrams that just don't need thrre screens.
dbaechtel wrote:
My troubleshooting strategies don't work well for large diagrams and complex applications....Can anyone offer their advice on how best to use the LabView features to achieve these results in complex applications? I hope that you can help show me the light.
Smaller diagrams single step faster since the sub-VI run full speed. I cringe thinking about a 3-screen diagram with multiple probes open ( shivver!).
Re: Nestested structres
Sub-VIs (wink, wink, nudge, nudge)
If it works you have prven the concept is possible. That is the first step in an application.
I hope that gives you some ideas.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Maybe you are looking for
-
Issue: Comments not showing correctly on iPhone
Hi, Please fix the below issue on iPhone App. Summary: If there is a long comment it only shows some of it on the iPhone. Viewing the comment on the iPad allows you to see the whole comment. Details: If the comment is medium length, you can tilt the
-
Syncing Palm Photo conduit with Treo 650
After much troubleshooting I have finally, successfully synced my Treo but only after I disable the Photo conduit. If I try to sync with it on everything syncs fine until I get to Media and then iSync crashes. I get a window asking me if I want to se
-
iphone 4 update deleted all my contacts. can i get it back?
-
Can i go from Snow Leopard (10.6.8) to Mavericks on an old MacBook?
Is it a good idea and can I upgrade to Mavericks on my MacBook Intell Core Duo now running Snow Leopard?
-
My Video Demo project froze while compiling
The preview screen is up but no playback controls appear. I cannot interact with the main screen while the preview screen is up to save the project. Right now it's listed as "untitled1". How do I save this video demo? I'm worried if I force quit that