How to build an installer including the vision Acquisition Software

hi all, my question is "how to build an installer including the Vision Acquisition Software".
is it enough to select "2010 Run-Time Engine" "Vision Run-Time Engine" and "NI-IMAQdx"? Its ok with the "2010 Run-Time Engine" but there is some problem with the other two.
can some one help thanks a lot!

hi again, i have some problem with install Vision Run-Time Engine
must i install RTE with the Serial Number, or i can chose the "install this product for evaluation" to continue the installing, maybe active it later. But after i chosed "install this product for evaluation" and finish the installing, i still cant find RTE from my disk.
i cant even chose my path to install the RTE. Can u plz tell me what is wrong with that?

Similar Messages

Vision acquisition software, library activation

I am having a problem and I would be very grateful if you kindly help me through. I have labview 2011 installed and licensed on my pc, I also installed the ¨vision acquisition software¨ from the Divers CD. Now after a while the vision acquisition library has stopped working and ask for activation. I have bought the vision acquisition software separately and I have the activation code, but I could not find a way to activate the installed library on my pc. I would appreciate if you kindly respond at your earliest convenience.
Solved!
Go to Solution.

Hello,
try locating and running "C:\Program Files (x86)\National Instruments\Shared\License Manager\Bin\nilmUtil.exe".
(x86 on my computer!)
This is the license manager, where you can activate your license. Right click on "Vision Acquisition Software" and activate. Follow the instructions.
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

Building an Installer with the product version major at 0

Hi Everyone,
I'm currently working on a prototype and I should build an installer for the prototype validation.
The matter is that the prototype version start at 0, and I can't find a way to set in the product version major field at 0.
Setting the major field at 0 is possible while building an executable, but not for an installer.
My LabVIEW version is 12.0
Thanks...

Marc-junior wrote:
It seems to me that it is the wanted behaviour application builder here. From the help page, you can read the following "You must increment the version number if you want to create upgrade versions of the installer that are capable of overwriting previous installers."
That does not explain anything. We should be able to make the first ever version 0.0.0, that can later be upgraded to e.g. 0.0.1.
According to microsoft:
The format of the string is as follows:
major.minor.build
The first field is the major version and has a maximum value of 255. The second field is the minor version and has a maximum value of 255. The third field is called the build version or the update version and has a maximum value of 65,535.
So, the max is 255.255.65535. There is no minimum given, so 0 should probably be allowed. I suspect that the input field in the build specification has an incorrect range setting.
LabVIEW Champion . Do more with less code and in less time .

Do i need an updated vision acquisition software with LV 8.5

i have been using LV 7.1 with vision acquisition software installed from cd that came with IMAQ card. i installed a full developement of LV8.5 and when i installed vision acquisition software there are no VIs that show up in the "vision and motion" functions. i need to find IMAQdx functions to read my 1394 IEEE camera.
is this a version issue? what can i do to get tthe 1394 functions in LV8.5.
thanks
NI vision acquisition: version 8.2.3
Labview: version 8.5
Message Edited by arawtry on 09-23-2008 11:14 AM

Dear arawtry,
Yes, this looks like a version issue. You need NI-IMAQdx 3.1 or later, which comes with Vision Acquisition Software 8.5 or later. You can determine version requirements from the following KnowledgeBase article:
NI-IMAQ and NI-IMAQdx Compatibility with Different LabVIEW Versions
http://digital.ni.com/public.nsf/allkb/6B55FF09D1FBD3108625719600650B7C?OpenDocument
I believe downloading and installing the latest version of the Vision Acquisition Sofware should solve your problem:
Vision Acquisition Software 8.6
http://joule.ni.com/nidu/cds/view/p/id/1099/lang/en
Best Regards,
~Nate

Does NI-MAX(NI Vision Acquisition Software) support USB3 Vision?

i has a Basler USB3 camera, which supported USB3 Vision. and then , i plugin this camera to my computer and setup the driver for it.
i setup VAS_2013_2.exe which said that ie support USB3 Vision。 after this， i run NI MAX， and i cannot find any device under "Device and interface" node;
So, i want to known that does NI-MAX support USB3 Vision?
thanks in advanced
Solved!
Go to Solution.

That version of Vision Acquisition Software doesn't support USB3. NI is adding support for USB3 with NI Vision Acquisition Software August 2013 (should be released during NI Week).
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Build an installer including folders that aren't in project?

My VIs work in my project. I am programmatically deploying two libraries. When I build an application and run that the libraries don't deploy even though they are "Always Included" in the application build. I think this is because they reside on my computer in folders and the application builder doesn't know what to do with them. All that doesn't really matter to me because if I manually move the folders to the location where the built application resides, it works as expected and deploys the libraries. The problem is when I want to build an installer for someone else to run on a remote computer. I can't choose the folders with the libraries in them and where they should install to when I build the installer. What am I expected to do?

I've had similar experiences with getting non-referenced files included in the application builder. The solution I found was to create a new folder in the destinations tab of the app builder and select all the non-referenced files to be placed there in the source file settings tab. I've only used this solution with an application builder, and have never created an installer program, but hopefully it will work for this too.
Hope this helps,
Andy

Tmxgta, a new installer including the guide in ncurses

tmxgta, a new installer made for comfortably reading instructions alongside your terminal.
The included guide covers the complete archwiki page "Beginners' Guide/Installation".
Everything is written in bash, and is licensed under GNU Free Documentation License.
Instead of showing a wall-of-text information is split up into sections. Read helpful information about your setup like partition layout and mountpoints. There is no need to switch virtual consoles and remember long commands. This is achieved by splitting up a virtual console into two windows using tmux. If you are familiar with tiling window managers you will feel right at home.
Features:
* non-destructive, does not overwrite anything
* complete content of Beginners' Guide/Installation
* dialog for displaying text
* progressbar
* load keymap from menu
* colorful markup of commands
* reflector for sorting mirrors with one keypress
* shows network interface names
* shows partition layout and mountpoints
* list of timezones and keymaps
* guide for UEFI autodetection of kernels
* ~2000 lines for scrolling saved in terminal
* all archiso features
Screenshot:
More screenshots
Download:
Download the latest iso release from Sourceforge:
https://sourceforge.net/projects/tmxgta … rce=navbar
Architecture:
tmxgta.iso is now working on x86_64 and i686 architecture.
The image can be burned to a CD, mounted as an ISO file, or be directly written to a USB stick using a utility like `dd`.
See the following links.
https://wiki.archlinux.org/index.php/Be … ion_medium
https://wiki.archlinux.org/index.php/US … tion_Media
Keyboard shortcuts:
There are only two keyboard shortcuts you need to know:
control-a + control-a : switches from the terminal to the guide and back
control-a : go to copy mode for scrolling up and down with the arrowkeys
or pageup / pagedown
Run tmxgta:
There are two possibilities to run tmxgta, it is recommended to download the .iso file.
Or get the script on github.
Known limitations: Looks bad on very small screens as in 600x800 pixels. The script is set to run only if 120 columns or more are available. Check 'tput cols' in the kernel console.
Thanks for reading and testing. Please submit bugs and your ideas on github or in this thread.
Last edited by teateawhy (2013-06-01 13:48:08)

The new iso 06-01 is released, including updates from the beginner's guide. There is now a menu to select from various options for wireless network configuration. ( wifi-menu, netctl-profiles, netctl-auto). Also you can use the mouse for copy-pasting commands (with gpm), if you have a usb-mouse.
HalosGhost wrote:I have to say, you should really throw a PKGBUILD together for this.
I don't think a PKGBUILD is all that useful, because this is about arch installation, whereas the aur is primarily used after installation. That said, if somebody wants to create a PKGBUILD, you are welcome.
mhertz wrote:Well, the standard iso dosen't have a problem either with you opening a new vt and firering up elinks on the arch wiki
Still, it's nice imho to have tmux available in the iso, which I also myself add to my own archiso-made rescue/install iso's... That and vim of course...
Only works with internet connection. With tmxgta it is no problem to read how to use netctl etc. without having internet connection.
I plan adding vim, if it does not take much space.
HalosGhost wrote:Obviously, this is just my opinion (and I have no idea what the Arch devs would think about this), but this may actually be a viable candidate to become a default installer.
I think it is a good idea to keep both iso seperate for the moment, so i have more room for changes.
fakedrake wrote:How far/realistic is the possibility of some of these features moving to the mainline iso?
I want to second tomk, please make a very specific bug report, or just use tmxgta instead.
Thank you for your ideas so far.

How to burn Cd's including the Lyrics ?

Hi!
I am trying to backup all my music cd's collection and I would like to burn them including the lyrics, so far I couldn't find a way to do so, I would like to know if it is possible and perhaps a hint to do it, I like to sing the song while I am listening them although I am not exactly a good singer....
Hector

If you are backing up, you should burn them as data, not audio (as macmenno stated).
How to back up your media in iTunes 5 or iTunes 6

How Do You Uninstall "Installer" From The iPhone?

I am selling my iPhone and did a restore from the phone.
It erased everything but Installer.
How do I go about getting it off the iPhone?
Thanks,
Sam
P.S.: I have not done the software update with this iPhone because I didn't want to brick it.

Wow, someone is a kind of uptight.
Anyway, for help with 3rd party apps questions, go to www.macrumors.com
Also, bricking your phone is nothing with software that is now available. You can brick your phone and have it working in less than 10 minutes...

With iPhoto 11 how is it possible to include the title of the photo with the image in the email?

Hello. In an older verson of iPhoto I could includ a title or description with the photo image in an email. With the Cloud and old Mobile Me emailing directly from iPhoto ('11) I can't find a way to do it.
Any help.

Use the old way and set Mail as your email client of choice in the iPhoto Preferences.

How to build this query with the minumum number of sub-selects?

The question I am trying to answer is analogous to this:
Give me all projects that: (have no employees assigned and are small) or (have only employees with the the last name = "Smith")
Thanks,
Roman

Thank you :
1- I am in 9.0.4.8 version and can not use allOf expression (availible in beta version)
2- I not find .notIn(subQuery) operator in 9.0.4.8 version and i replace it by .in(subQuery).not() !
My new query retrieve Customer who have 0 (zéro) Orders !
How to retrieve only customer (with orders + with orders without "television") ?
My new query is :
<div align="left" class="java">
static void findCustNoComputer (){
 ClientSession cs = TopLinkSession.acquireClientSession();


 ReadAllQuery query = new ReadAllQuery(Customer.class);
 ExpressionBuilder queryBuilder = query.getExpressionBuilder();

 ExpressionBuilder subqueryBuilder = new ExpressionBuilder(Customer.class);
 ReportQuery subQuery = new ReportQuery(Customer.class, subqueryBuilder);
 subQuery.addAttribute("id");
 subQuery.setSelectionCriteria(subqueryBuilder.anyOf("Orders").anyOf("OrderItems").get("product").get("productName").equal("Computer"));
 query.setSelectionCriteria(queryBuilder.get("id").in(subQuery).not());

 Vector allCustomers = (Vector)cs.executeQuery(query);
 Iterator allCustomersIterator = allCustomers.iterator();
 while (allCustomersIterator.hasNext()) 
 {
 Customer tempCustomer = (Customer)allCustomersIterator.next();
 System.out.println(tempCustomer);
 }
 cs.release();
}


Sql of query :
SELECT
 t0.CUST_LAST_NAME, t0.CUST_FIRST_NAME, t0.CREDIT_LIMIT, t0.CUST_EMAIL, t0.CUSTOMER_ID, t0.PHONE_NUMBER2, t0.PHONE_NUMBER1, t0.CUST_STREET_ADDRESS1, t0.CUST_CITY, t0.CUST_STREET_ADDRESS2, t0.CUST_STATE, t0.CUST_POSTAL_CODE
FROM TL_CUSTOMER t0
WHERE NOT (
 (t0.CUSTOMER_ID IN
 (SELECT DISTINCT t1.CUSTOMER_ID
 FROM TL_CUSTOMER_ORDER t4, TL_ORDER_ITEM t3, TL_PRODUCT t2, TL_CUSTOMER t1
 WHERE (
 (t2.PRODUCT_NAME = ?) AND
 ((t2.PRODUCT_ID = t3.PRODUCT_ID) AND
 ((t3.ORDER_ID = t4.ORDER_ID) AND (t4.CUSTOMER_ID = t1.CUSTOMER_ID)))))))
Regards

Vision Acquisition Software installed, BUT why is the IMAQdx missing from the function palette?

I just installed to the labview 2011, and many other modules and softwares including this VASAugust2010. But the IMAQdx is missing from the function palette (vision and motion). However the NI-IMAQ 4.5, IN-IMAQ IO 2.4.0 and NI-IMAQdx 3.7 are all clearly listed as installed in the NI software (contorl panel -> program - NI). In MAX, my usb webcam is also listed as NI-IMAQdx Devices and works well under MAX. But my own program is broken because the LV can't find those functions. So why the IMAQdx funtion is missing and how to fix it?
Thanks,
Lei

hi tommy
check this may helps you http://digital.ni.com/public.nsf/allkb/A451D3CCBB740716862578FC004DB392
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney

I just updated to ios 7.0. I really don't like it! How can I go back to the old iphone software?

Hello! So I updated my iphone 4s software a few days ago to the ios 7.0. I really don't like it! The calendar is the worst part of it! I used to love the calendar, notes and clock/timer app on my iphone! Now I hate the new layouts and how they work! Is there any way to go back to the older software on my iphone?

I was in the same situation. Today I went to my wireless carrier's store and upgraded my hardware to iPhone5. It comes with iOS 6.1.4.
I had backed up my 4S before foolishly installing iOS7, so I was able to recover all the apps, most settings, etc., as usual, in iTunes.
Hope this helps.

How to turn off apps on the new iOS7 software?

How do i turn off apps on the new iOS7?

Double-tap the home button and then swipe UP on the app preview window.

In how many computers can i download the creative cloud software?

my laptop is old and not fast enough
if I download illustrator software will i be allowed to download it again to another computer?
thanks
Beatriz

You can download to all the machines you like. You can only have two machines activated to run the software.

How to build an installer including the vision Acquisition Software

Similar Messages

Maybe you are looking for