How to build anintractive questionare using labview

Hi everybody,
I am working on Curriculum Developement where I would like to come up with an automated LabView questionare as an alternative solution to existing paper-based questionaires. I'm interested in using labview but I have no idea how to begin. could someone please help me out.
I really,Really need this help.

Thank you so much Adnan,I know I may sound stupid asking these questions but its because I need help and would really love to use labVIEW and understand it even better (am not big in programming much less using text based languages,but I love labVIEW and would want to explore it even further! thats why I opted to use Labview in building this interactive and automated questionare).
This questionare should capture almost all the information that is required,thus it will include both detailed and one word answers. check boxes and radio buttons if possible. as you have pointed out,the questions should be put in a database and the corresponding answers also to be captured in a database for later analysis.
My labVIEW knowledge is not wide but am going through some materials at the moment plus your support and I hope to accomplish this within the shortest time possible.
regards

Similar Messages

How to make load simulator using labview 2010

i want to ask how to make load simulator using labview?
Solved!
Go to Solution.

what have you tried so far? and exactly what is it your tying to do?
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

How to make RC circuit using labview

Hi,
how to make RC circuit using labview... Thx

Your question seems awfully similar to this thread. Is this a school assignment?
Jeff
Using Labview 7 Express

Is it possible to build a firewall using labview??

Is it possible to build a firewall using labview??
RAJESH

There are several kinds of firewalls, for example:
(1) so called "personal firewall software" which applies some policies to incoming and outgoing ethernet traffic on the computer it is running.
(2) Dedicated hardware firewalls (having at least two ethernet interfaces) that enforce policies of traffic flowing across. These can be bridging, routing, or even be proxying.
LabVIEW does NOT have access to the low level packet structure (ethernet header, ip header, tcp header, etc.) and relies on the OS for routing decisions. LabVIEW only deals with TCP and UDP and only at a very high level. A firewall must also make decisions for e.g. ICMP, GRE, or other IP packets, must know the status of all TCP flags (SYN, ACK, URG, PSH, FIN, RST), must check for valid fragmentations, et., etc.. LabVIEW cannot do any typical firewall tasks unless you do most of your work with external routines. In this case, LabVIEW just provides the UI.
(Even simple ftp traffic would be quite complicated. For example the ports for the secondary data connections must be dynamically allowed based on information gleaned from the control connection, in this particular case the PORT command and the reply to the PASV command).
I would say the answer is NO! Not with the networking tools provided with LabVIEW alone.
With lots of work, you might be able to built a simple proxy server using LabVIEW, but this would seem quite useless...
LabVIEW Champion . Do more with less code and in less time .

About how to build dynamic maps using jdeveloper 10g and mapviewer

i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetings

I found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application.

How to build shared members using Rules file

hi all,
we have a source file like below,in that Bold members are shared member. we doknow how to modify the source file for building shared members using Rules file.
Conf Total,~,Config A,*Lightbolt 365 A*
Conf Total,~,Config A,*Lightbolt 540 A*
Conf Total,~,Config A,*Lightbolt 730 A*
Conf Total,~,Config A,*Thunderball 365 A*
Conf Total,~,Config A,*Thunderball 270 A*
Conf Total,~,Config A,*Roadranger 123 A*
Can anyone give suggestion to resolve this issue.
Thanks in Advance

hi John,
Here i'm building the dimension through generation build method.
setting the properties as
Field, Dimension, Field Type, Field Number
Field1,Product,Generation,2
Field2,Product,property,2
Field3,Product,Generation,3
Field4,Product,Generation,4
After mapping it shows dimensions are correctly mapped.
When i load the source file and the rule file, it shows error partially loaded data,.And it doesn't shows the shared member property. That is what asked How to modify the source file for building shared members using Rules file.
Thanks,
Edited by: user@99 on 25-May-2010 15:37

How to build dynamic menus using JSP==Urgent==Please Help me

Hello,
I have exhausted searching on internet to find a book
which tells how to build Dynmic menus in JSP.I dont want
to use DHTML as this becomes complex as the menu categories
are built using data from database.Is there any workaround in
java to do this without DHTML or atleast sample code.
can somebody help me in this regard.
Thanks
Jack

Hello a.s.kumar,
I would be greatful if you could send me the sample code.
[email protected]
we can't let MM Flash run away with the show can we. Javascript can do a decent job, but the underlying menu data is static.
Cheers, Darren

How to implement wafer mapping using LabVIEW?

Hello LabVIEW Masters!
I am having an incoming project which includes controlling and gathering information from a PROBER. One of the difficulties I am having now is how to implement a WAFER MAP using LabVIEW. According to my customer requirements, the wafer element ranges from 6k to 23k. I guess doing all the element (one die = one led ctl/indicator) will be a hell of a task, especially on how to effectively manipulate each elements. Does anyone have better idea on how to this?
Please, I badly need your help..
Thanks and Regards,
Dennis DG
Solved!
Go to Solution.

Hi Dennis,
Is it okay if you send to me the working VI also?
No, it's not ok. I made that program for my customer...
As I am not too familiar in using intensity graph.
That's no reason to hand over programs for free...
My customer also request me that if the cursor hover on the wafer map, he wants the x,y corrdinates to be displayed.
I also have such a feature. Did you notice the little yellow cursor near the center of the wafer? One could easily change that to use a MouseMove event instead...
He also wants to select some elements in the wafer map and come up with the coordinate values to do some testing.
That's related to the cursor thing...
Some points:
- You have a customer that pays you. Why should I offer work for free?
- You can send me contact dates of your customer, I will make him an offer...
- When you take an job to provide software you should be able to code the software...
- The VI(s) are now some years old. I didn't code so well back those days and don't want to hand out those VIs as they are right now.
- I included some "license management" deep inside that program, I would have to remove this and spend time on testing afterwards...
- The VIs are based on the PROBER output format used by the customer. All the file handling has to be changed for/by you...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to simulate an lcd using labview

hi
i need to simulate a graphical lcd in pc using labview?(7.1).
i have posted this earlier and got replies.but i wish to know how to create the lcd screen?
i think i can make use of booleans.but i need the exact details for creating the graphical screen.
and on how to make each pixel glow(i.e., ON and OFF)
can anyone help me out in this issue..
regards
mahi

Hello Mahi,
I just jumped into this thread and remembered, that a few years ago I had a project to generate c-sources (actually header files to be included into c sources) to show custom made characters on an lcd display. As a side effect it creates what you need, a 3D- boolean array, where every 2D- portion holds a character.
With this program you can define the size of the character and alter it the way you need it. You can import a bmp- file with characters you need (e.g from a screen copy, must be a 1-bit bmp, black&white) and copy little frames from it to make work easier. If you click in the menu at "Fonts->Save Bool Spreadsheet" a text-file will be created which is in spreadsheet-style, where every cell (if you open it in Excel) consists of 0 and 1 according to the character. If you scroll down the front panel, you will find the 3D- Bool array which represents this data.
Just try it, the top-VI is "Fonts V2.vi", it should run properly. I put some screen-copy-bmp file and *.h- files into the zip to make the test easier for you.
I hope this helps,
Dave
Greets, Dave
Attachments:
Fonts.zip ‏998 KB

How to create a database using LabView?

Hy
I have to do a project in which i have to create a database with the situation of the students (name,age...) using ONLY LabView.I need to enter tha students using labview, to save the database using labview.... I have to figure it out how to do this, but .... no idea. Also i have to make a search in that database. If you can help me, i apreciate that or if you know a link on the web about something like this
Thanks,
Lorant

Labview configuration files are very easy to use and can hold any type of information you wish. There are functions in the File palette ready to use for configuration files. A configuration file is similar to a registry entry. You can have sections and keys. So you can create a section called "Data1" and keys called "Name", "Age", etc. Create the same for a new section called "Data2", and so on. The functions are useful for writing the config file and reading from the file. To read a certain piece of data, just supply the section name and the key name. So you could ask for section "Data20", key "Name", and you would get the 20th name in the database (config file). This way you don't have to write code to search the database for certain items, the functions do it for you and they are already written. Look into config files. They are very easy to use, very useful, and very underused even by the most experienced LV programmer.
- tbob
Inventor of the WORM Global

How to access parallel ports using LabVIEW?

I want to send data to a device which is connected through LPT1.when Iam using serial port write.vi with port number 10(for LPT1) it is giving an error code 37 which means the device not found. whether those vis are only for accessing serial ports? Then how to access LPT1 using LabVIEW?

Most likely you need to modify your labview ini file to let it know that LPT1 (or whichever) will be controled through the serial port control. See the following link for a knowledgebase answer to this question:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/a5abd9d76665217b86256333005ac9a5?OpenDocument
Jared

How to view mdsplus data using labview

I posted this question in the Labview board, but seems nobody replies it so far. I am not sure which board is the best place to post this question. So I just reposted here. Thanks a lot.
I am a newbie to Labview. I am trying to write some vi to view and write data to Mdsplus. I have downloaded Mdsplus(labview), and can find the Mdsplus functions, like mdsconnect, mdsput, ect, in the Call Library Function vi. But I have no ideal of how to use it. I tried to use Mdsconnect function to connect to some machine, but it always gives me an error message like, Labview: An exception occurred within the external code called by a call library function node....... I was searching for help documents on the internet, but couldn't find anything useful. Could you please help me for this problem? If you have any example of such vi, or teach me how to do it, that would be very helpful. I am using Labview 8 (windows). I would greatly appreciate your help! Looking forward for your reply.
Solved!
Go to Solution.

oops,
I didn't attach these correctly in the previous post.
Greg
Attachments:
Example_Read_Write_MDS_Array.vi ‏25 KB
Open_MDS_Shot2.vi ‏45 KB

How to run stepping motor using LabVIEW

Hi
I need to run bipolar stepping motor using LabVIEW 6.1. Would anyone please guide me how to do that.
I have measurement and automation 3.1.0.3021 installed on my system. I am new to LabVIEW.
Jayaprakash.

Hi,
Do a search for the words "stepper motor" in the forums. This should bring up several threads where this has been discussed.
-Sal

How to control TTL device using LabVIEW?

I have a device which requires TTL (+5V) to control it to be on/off. How can I provide this TTL to it using LabVIEW? I guess I should install a PCI board in my computer to connect to this device, but how to do my LabVIEW coding to control it?

Hi,
First of all if your board is NI board after corect instalation you need to view this board in the section Devices & Interfaces from the NI program Measurement & Automation Explorer.
Also if the board is NI board or has the divers for LABView you need to find in the LabView the functions to command your board.
Other posibility is if your board is no't compatibile wi NI, in this case you need to extract from DLL, the function to command the board.
By

How to open an app using LabVIEW PDA Module 7.1

Hi,
i´m developing an app using LabVIEW PDA Module 7.1 that needs to open a
standard application (in particular, the default camera application) on
my PDA (Qtek 2020 with Pocket PC 2003). Can anyone tell me how to do it?
Thanks,
Pedro Sampaio
Computer and Telecommunications Engineer Student
ESTG -IPL, Portugal

Olá,
Com o project podes fazer builr e deploy, a partiur daí tens a aplicação instalada na PDA.
Cumprimentos

How to build anintractive questionare using labview

Similar Messages

Maybe you are looking for