How to build CDC/FP using Fedora?

The specified environment for building the J2ME CDC/Foundation is RedHat Linux 6.2. However, the latest release of RedHat Linux is Fedora. How do I build the CDC/Foundation Profile using this latest version of RedHat Linux?

As an electrical circuit, a comparator is an analog circuit with two input voltages: a reference voltage, sometime referred as a threshold, and an input voltage. When the input voltage is above or below the reference voltage, the output of the comparator change its state.
You can emulate or even create versatil a comparator in LabVIEW by comparing the input voltage against a constant using the most adequate comparison function in the function palette. For example, you may want to use the "Greater?" vi to compare the input voltage (the x input) against a constant value (the y input). If x > y, the output is a boolean TRUE, if not, is a boolean FALSE. You can use this output to determine your output voltage. A good function to do so is the "Select" vi, which wil
l allow you to select between two options depending on the boolean state.
Best regards;
Enrique
www.vartortech.com

Similar Messages

About how to build dynamic maps using jdeveloper 10g and mapviewer

i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetings

I found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application.

How to build shared members using Rules file

hi all,
we have a source file like below,in that Bold members are shared member. we doknow how to modify the source file for building shared members using Rules file.
Conf Total,~,Config A,*Lightbolt 365 A*
Conf Total,~,Config A,*Lightbolt 540 A*
Conf Total,~,Config A,*Lightbolt 730 A*
Conf Total,~,Config A,*Thunderball 365 A*
Conf Total,~,Config A,*Thunderball 270 A*
Conf Total,~,Config A,*Roadranger 123 A*
Can anyone give suggestion to resolve this issue.
Thanks in Advance

hi John,
Here i'm building the dimension through generation build method.
setting the properties as
Field, Dimension, Field Type, Field Number
Field1,Product,Generation,2
Field2,Product,property,2
Field3,Product,Generation,3
Field4,Product,Generation,4
After mapping it shows dimensions are correctly mapped.
When i load the source file and the rule file, it shows error partially loaded data,.And it doesn't shows the shared member property. That is what asked How to modify the source file for building shared members using Rules file.
Thanks,
Edited by: user@99 on 25-May-2010 15:37

How to build dynamic menus using JSP==Urgent==Please Help me

Hello,
I have exhausted searching on internet to find a book
which tells how to build Dynmic menus in JSP.I dont want
to use DHTML as this becomes complex as the menu categories
are built using data from database.Is there any workaround in
java to do this without DHTML or atleast sample code.
can somebody help me in this regard.
Thanks
Jack

Hello a.s.kumar,
I would be greatful if you could send me the sample code.
[email protected]
we can't let MM Flash run away with the show can we. Javascript can do a decent job, but the underlying menu data is static.
Cheers, Darren

How to build anintractive questionare using labview

Hi everybody,
I am working on Curriculum Developement where I would like to come up with an automated LabView questionare as an alternative solution to existing paper-based questionaires. I'm interested in using labview but I have no idea how to begin. could someone please help me out.
I really,Really need this help.

Thank you so much Adnan,I know I may sound stupid asking these questions but its because I need help and would really love to use labVIEW and understand it even better (am not big in programming much less using text based languages,but I love labVIEW and would want to explore it even further! thats why I opted to use Labview in building this interactive and automated questionare).
This questionare should capture almost all the information that is required,thus it will include both detailed and one word answers. check boxes and radio buttons if possible. as you have pointed out,the questions should be put in a database and the corresponding answers also to be captured in a database for later analysis.
My labVIEW knowledge is not wide but am going through some materials at the moment plus your support and I hope to accomplish this within the shortest time possible.
regards

How to build custom search using API - 10.1.2

Hi,
I have been looking through some documentation and i can't seem to find how to use the API in portal 10.1.2 to create a custom search. Any help or samples would be appreicated.
Thanks

The Search API is a new feature in 10.1.4. In older version a custom search portlet was provided, no API.
<br><br>
You can build a search engine yourself in Portal 10.1.2 by using the Oracle Text API. The search engine should implement security however which can be quit difficult to accomplish. It is not impossible however.
<br><br>
In most cases it is has less impact to upgrade to release 10.1.4 then to build a search engine yourself. My advice would be to install 10.1.4 on a test system and play around with the new search API. You can then decide whether it is worthwhile to upgrade to 10.1.4 where you profit from several nice new features.

How to build JDK1.5 with Fedora Core 3 on AMD64?

All,
Currently, I am going to do some research work related to the JDK1.5 so I have to rebuild it on the top of Fedora Core 3 on AMD64. But it failed with some "invalid section error messages in assembly language". I wonder that if there is any pepole who have successfully built it before? If yes, could you give me some instructions about the whole building process? Do you still need the GCC 3.2.2? How do you build the GCC 3.2.2? And are you working with the source code from SUN JAVA SCSL, also? In fact, I encountered some "invalied section error" when compiling the .cpp files into .o files.
BTW: I have successfully built the JDK1.5 with FC3 on Inter 32 Bit, with GCC 3.2.2
Thanks,
Neo

A little more detail, please. Excerpt from build log?

How to build an array using incoming stream of data?

I am programming in VBAI but use LV as my Inspection Interface. The VBAI program will go in a finite loop (1000x) and feed the numeric indicator with dbl vaule in the front panel of LV. So the dbl value is in sequence.
In LV, how do I build an array (index 0 - 999) with this stream of data?
Solved!
Go to Solution.

altenbach wrote:
You can eliminate that useless FOR loop by using a globally initialized feedback node instead of a shift register.
You also need a mechanism to reset the shift register contents.
What are you doing up at this hour? Don't you sleep? Per your advice. The OP will still need to code in an initial state for the array.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

How to build jms files using netbeans ide

hi,
i am using the latest netbeans ide to build a simple jms java file,
but i am getting this:
init:
deps-jar:
Compiling 10 source files to
C:\wrox\pro_jms\Chapter04\Test\build\classes
C:\wrox\pro_jms\Chapter04\AccountsDepartment.java:4: package
javax.jms does not exist
import javax.jms.*;
C:\wrox\pro_jms\Chapter04\AccountsDepartment.java:11: cannot find
symbol
the netbeans ide i am using is jdk_1.6, which when i use directly to
compile in command line mode, works. can anyone tell me why this is
happening?
thanks.

I take it that you are trying to build a Java applicaiton that uses JMS API. To do it in netbeans using SUN OpenMQ I usually follow those steps:
1) I create a new project
2) I add JMS library. This is a library that I had created in netbeans using Library Manager. It consist of jms.jar ( this jar file contains the definition of JMS API). Next jar file is the implemention of the JMS API, in case of SUN OpenMQ it's imq.jar, but if you're using a different JMS provider it may be a different file. The last jar file in my JMS library is usually fscontext.jar, this jar file provides JNDI access to a file based store. Again if you're using something like ldap then it would be a different jar file.
That's basicly it - Tom

How to build android apps using sapui5 libraries with intelliJ IDE..?I want complete steps

Thanks in advance
Thanks & Regards
Raghu

Mike the Moderator here.
There are nice and polite ways of correcting people's approach to SCN and there are comments that lead to flame wars. Two such comments have been deleted from this thread. Please be diplomatic in correcting a newbie's approach. We want newbies and experienced pros to all gain value from SCN.
If you object to a post, you can use the Alert Moderator button and report as General with a comment regarding overly broad questions.
If you Alert Moderator with Failed to Search, but don't provide the search criteria, I will reject the Alert Moderator as I don't have time to perform such a search and won't reject on the basis of someone's undocumented opinion no matter how experienced the reporter.
And always remember the Irish definition of diplomacy:
The ability to tell a man to go to hell, such that they look forward to the trip.
Have fun, learn, play together nicely. Is that too much to ask?
Thanks, Mike

How to build family tree using flex ?

http://hgc46123.chinaw3.com/haha.jpg
I want to build a panda family tree like http://www.myheritage.com/
for the data is large,so i want to use dynamic picture loading like google map.
but i don't know lean what ? i hava java programing experience
please give me some advice .
thank for your attention .

or in the html file, add a timestamp to make the swf name unique each time you refresh the page
main.swf?ts= new Date().getTime()

How to build a server?

Hey,
Can anybody tell where I can find online tutorials on how to build a server using java?
Thanks

@bender02
Thx very much for your link. This ready-made solutions can help me to save a lot of otherwise wasted time. QNAP's NAS solution looks good and this Bubba|Two (though it doesn't have mirroring via raid1) is also very attractive.
I am very interested in what server solution you use.
My planned server is really for local network uses only. It should serve for file related purposes like file sharing over the network, backup (maybe with raid1) and a centralized data storage.
I think I will settle with one of this commercial and ready-for-use systems. The thought to tinker around and to make everything by yourself is very temptating but I am getting weary of it. And I dont have the time to tinker around as I have to study enormous amounts
If I did everything by myself I would have to learn how to handle ssh and rsync, which software is suited for what purpose, how I can configure each software to fit my needs and at last I would have to work on some scripts or search for them to achieve a workaround. And this takes for weeks and months, time that I can't afford -.- sometimes a desktop alone can be enough work to do, when I want everything to be "perfect" and "secure". In the past the guys worked on their motorcycles and now they work on their computers, hehe
So if nobody has a very good reason why I should tinker around, then I'll buy some ready-for-use stuff.
Last edited by hauntergeist (2009-04-11 20:55:56)

How to Build an Animation to run a Box

Hello,
I have a question. Have someone an Idea to build an Animation which includes this:
- Only use Animations how work in HTML5
- Use Captivate 8
- Let a box run from left to right. On the right side it has to disappear. then it have to start on the first position in the left und run from left to right again.
- Do this, every 6 seconds, as long as the sheet is on the screen.
I don´t know how do build this without using some Flash Animation and without build 1000 boxes....
Maybe someone has a great Idea and can help me
Thanks

I would use Edge Animate to create that animation.

Building a website using my imac

hi im having trouble figuring out how to build a website using iweb and selling my music thru my website. im an independent artist and looking for other ways to distribute my music thanks.

Welcome to the Apple Discussions. First visit the Apple site and view the iWeb tutorial videos. That will give you a good start on iWeb. Then visit Roddy's iWeb for Musicians site. He's doing the same think you want to and has many how-to pages that will help you.
OT

How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000

Post Author: ltkin
CA Forum: WebIntelligence Reporting
Hi,
How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000 ?
Regards,

Hi ltkin,
Unfortunately, it is not possible in Xir2 to create Webi reports from stored procedures.
Webi reports can only be created from Universe. So in Business Objects XIR3 we can create a special universe that enables Web Intelligence user's to access stored procedures residing in the database. This is the only way that Web Intelligence user's can access stored procedures.
Please let me know if the above information helps.
Regards,
Pavan

How to build CDC/FP using Fedora?

Similar Messages

Maybe you are looking for