How to build new basic key figures in library 4FM for different local curre

Hi Experts. I am working my reports with library 4FM. I need to create a new basic key figures in order to create a new report with severals currencies, like group currency or transaction currency.
Does anyone know how to do that ?
regards,
Ruth

Yes I did. they told me: "availability control only works with local currency. Transactional currencies are not supported in availability control (neither BCS nor Former Budgeting). The developer confirmed the information above. At this moment that thereare no plans to support transactional (non-local or non-FM area) currencies in BCS in a future release. I am really sorry, but I cannot provide you with a more positive answer,anyway, I propose you to refer to note 11. 11 Requested function is not in standard system. Note 11 will guide you to request the suggested changes, this is the correct channel and the chance to provide the requested functionality asstandard. Thank you very much for your understanding! "
I wrote them back and I said "we don´t need availability control in another currency, we only need that SAP add a key figures in FMAVCT table in order to have FM reports with different currencies"
Should I say another thing?
We are waiting for good news. will see.
Thanks a lot for you cooperation.

Similar Messages

Report Painter - new Basic Key Figure for Currency Translation

Hi,
I need a report painter report which allows to translate the company code currency HSL in GLPCT into several target currencies. Theoretically I need to translate each month with an own translation rate and possible different translation keys.
In table T804B I tried to create a new basic key figure for GLPCT in order to translate the HSL amount with a second TCURR rate. I copied the original basic key figure GLPCT - CC_HSL. I selected structure GLBDZ and fields CCH++ as data source and assigned new variables for the TCURR selection.
The report painter report is setup with three columns : one in HSL, one with CC_HSL and one with the new key figure. In the selection screen of the report painter report I can enter two rates. But after execution the translation of the new basic key figures is done with the same rate as the CC_HSL column is using.
Did anybody encounter an equal problem?
Many thanks and regards
Markus

have you created a new calculation routine in form pool SAPFGRWG equivalent to E06_CALC_CURR_CONV_HSL? doesnt this explicitly get the company code currencies

How to find the basic key figure for a calculate key figure?

Hi,
We know one Calculated Key figure available in a query for a Info Provider. How can we find the Key figure which has been used for that CKF or from the Calculated key figure? Please help.
Advance Thanks,

Hi,
1. To check the definition of the CKF you need to go to the query designer.
2. Once into the query desiger switch on the technical names in the query. THis option is available in the Icons displayed on the top of query designer
3. Then right click on the CKF and click display. You will find the necessary details.
4. If you are not able to see the definition of the CKF, then you may need to go in the change mode and then . Try this in development environment.
Regards,
Adarsh

How to create Basic Key Figure, Key Figure and Characteristic

Hello Gurus,
I have copied a standard layout of KP06, named it as a Z- layout and made changes to it, like defined the plan data upload field as Object Currency enabled.
However I want to add a Z-Field , tax holiday unit as a column to this layout which I am not being able to do. The reason is when I go to Insert a new element from Edit > Element > Insert Element and click on 'Key figure with Characteristics' I do not get the Z-Field as a key figure.
I want to define the Z-field as a key figure, so that I can add it as an element.
Would be really nice of you if you can let me know the t-code/menu path to do that.
Regards.

Hello Gurus,
I wanted to share this information with you, hoping this will help you to help me.
I also tried to create a Key Figure in t-code GS32. In the table I mention --> FAGLFLEXR and hit enter. It says no Key figure has been defined for FAGLFLEXR. Then I put the cursor on the 'Reference Entry'and click on copy. Then give the name of the Key Field I want to create.
'Create Key Figure' dialog box appears. When I input the 'Row Text' 'Column Text' and click enter, I am getting an error 'The basic key figure entered for table FAGL is not defined'. I go back and do an F4 on 'Basic Key Figure' field, then I do not get any options.
I would be highly grateful if you can let me know how to create this 'Basic Key Figure' for table FAGLFLEXR.

"new selection", restricted key figure and basic key figure

Hi,
I have a test report and i have a basic keyfigure "ZRevenue" and "restricted key figure"(its defined over "ZRevenue") and
a "new selection"(its defined over "ZRevenue").
Now that i have "material number" and "material color" and "request id" in the rows. ("Material color" is a navigational attribute of material number).
In the column level i have a basic key figure "ZRevenue" and "restricted key figure"(its defined over "ZRevenue") and
a "new selection"(its defined over "ZRevenue") .
In a "restricted key figure" or "new selection", we can include a basic key figure or new formula or calculated key figure or an already restricted key figure into it, then we restrict it, with one or more characteristic values. In the report output we get KF values only for those characteristic values, with which it has been restricted. Please correct me if my understanding is wrong.
Initially i restricted the "new selection" (with material number 1 to 3) and "restricted key figure" (with material number 1 to 4).
In the cube i have material numbers 1 to 11. Now all the values were displayed from 1 to 11, but for the
"new selection" (with material number 1 to 3) and "restricted key figure" (with material number 1 to 4) i got values only for 1 to 3 and values for 1 to 4 respectively. This is as expected and is working fine.
Now i tried to restrict the basic keyfigure "ZRevenue" with material number 1, the output was only until the material number 4 (this is the greatest value of the material number defined over the "restricted key figure").
Then i tried to restrict the "new selection" (with material number 1 to 9) , then the output was from 1 to 9 material numbers.
If i remove the restriction over the basic keyfigure "ZRevenue" , then i get all the material numbers from 1 to 11, for "new selection" i get values for the material number 1 to 9 and for "restricted key figure" i get values for the material numbers 1 to 4.
Can some one explain me why this behavior?
Edited by: sapbi enthusiastic on Jan 31, 2012 11:48 AM

Hi,
This is where set theory comes in handy
So what you have is a basic KF (BKF), a selection (SEL), and an RKF.
When producing an output, BEx seems to be looking for the union of all the restrictions you place on these. So when your BKF is not restricted, the union comes out to everything in the underlying DSO. When you restrict the BKF for material number 1, this is how the restrictions might have been processed internally
BKF: Restriction on material 1
RKF: Restriction on material 1-4
SEL: Restriction on 1-3
Union of these three: 1-4
When you remove the BKF restriction and make SEL restricted to 9, this is how it plays out
BKF: NO Restriction on material
SEL: Restriction on material 1-9
RKF: Restriction on 1-4
Union of these three: everything.
As the union ends up giving you everything, you get 11 records. However, as SEL is restricted for 1-9, the SEL will have values for the materials 1-9. Likewise for RKF, you'll get values only for materials 1-4. Hope this clears things up!
Regards,
Suhas

Table fields used for basic key figures in report writer/report painter

Does anyone know how I can find which table field is actually being used for SAP defined basic key figures in report writer report? For example, HSL is a basic key figure for income statement, library 0F1, report 0F-GUVV. It only shows data is coming from table GLFUNCT. How does the report writer program knows which fields to select? What is the logic behind the basic key figures?
Any advice is appreciated!!
Minami

I have now resolved this issue.
I had to manually update TablesT804B and T804F.
I've added entries to T804A in the past without the need to update T804B or T804F manually so it appears that the way these tables work together has changed following an upgrade or application of support packs.
Regards
Mel

Basic Key Figures in Report Painter.

Hello:
Im working with report painter. I already did a report and in every columns I used (HSL-Local currency) as Basic Key figure. But now, I need to add a column and use Basic Key Figure (MSL-Quantity).
If I check in the library (tcode GR22) this Basic Key figure exists, but when I try to create the column I don't have this Basic Key figure as available.
Does anybody know what is missing?
Thanks a lot.
Regards,
Adela.

You are right Sue. But unfortunately way back in the 90's when our company implemented SAP, those company codes did not activate the 2nd LC as USD. Thus, these companies only have figures updated in the 1st LC which is USD.
Subsequently, we acquired new companies overseas and then for these co's we switched on the 2nd LC as USD with the 1st LC as the country specific currency.
Vishal.

How to Create a Restricted Key Figure in BO Webi Report

Hi Experts,
Please tell me How to Create a Restricted Key Figure in BO Webi Report.
Thanks in Advance.
Regards,
Rafi

Hi,
1. Define a new measure in the designer.
2. In the select clause give the reference to the key figure on which restriction to be applied.
For example
@Select(Key Figures\Number of Records)
3. In the where clause, give the MDX expression for the filter to be applied.
For example
<FILTER KEY="[0PURCH_ORG].[LEVEL01]">
<CONDITION OPERATORCONDITION="InList">
<CONSTANT CAPTION="HAS"/>
</CONDITION>
</FILTER>
Regards

New Restringed key figure

Hi experts!
We would like to ask if it is possible to create a new calculated key figure within an BEX report in this way.
If the key figure is between a range of two key figures calculated, we would like to make it have a value in letters.
For example, we have the KF 1 with value and the KF 2.
     We would like to have two new key figures having into account KF1.
          If the difference of Key figure is +/- 1, we would like to see a value (ideally in text)
          If the difference of that key figure is supeior to 1, we would like to see other value (ideally in text)
     The the idea is: ¡
          KF3 =>If the value of KF1 is between +2 / -2 over KF2 ==> Value "OK"
                    KF 1 = 10
                    KF 2 = 10,5
                    Range (-1,+1)
                    As result => KF3 with value " OK"
          KF4 => If the value of KF1 is superior +2 / -2 over KF2 ==> Value " NO OK"
               For example:
                    KF 1 = 10
                    KF 2 = 14
                    Range (-1,+1)
                    As result => KF4 with value "NO OK"
In case that text is not possible, do you see any other alternative?
Thank you very much in advance for your help!!

Hi DieGasse,
create two restricted KF with the above logic which you have mentioned.
and then follow the below procedure
1) click on the exception button in the tool bar
2) you will get separate tab 'exceptions' .
Rclick on the area, and click 'create exception'.
3)Rclick edit --> New
4)select Good(green)/average(yellow)/bad(red) and the values.
5)in the definition tab of your exceptions, select your keyfigures
6)save and activate the same
let me know if you need more help in this.
BR
adlin

Basic Key Figure - SWZG - Total cost in target currency

Hi there,
    Just wonder if it is possible to translate from Object currency to Target currency in customized CO report painters if basic key figure SWZG - Total cost in target currency is used. I've tried to maintain Reference currency under reporting currency in RPC0 - User Settings, however it seems the translation is still based on controlling area currency to target currency.
    Is basic key figure SWZG is fixed at translating from controlling area currency to target currency? If so, any other option to allow SAP to translate from Object currency to Target currency in CO reports?
    Look forward to hearing from you soon.
    Many thanks
rgds
Wei Jinn

Hi Hari,
These keyfigures are there in the ODS but i cant see in the update rule with 2LIS_03_BX but when i try to create update rule with 2LIS_03_BF it shows me an message that keyfigure is set to no update !
But the same when i do with BX it does not show me the keyfigures in the rule!
Help me!
Regards
Ram
Thanks

BO( WEBI,QAAWS ) can't sustain bw query : create new calculate Key Figure ?

BO( WEBI,QAAWS ) can't sustain bw query : create new calculate Key Figure ?
I create three new calculate Key Figure : TotalQty1,Rate1,TotalRate1 on bw query. Return values:
TSAS defect1 Qty TotalQty1 Rate1 TotalRate1
weight inaccuracy 33.000 33.000 37.500 % 37.500 %
poor function 10.000 43.000 11.364 % 48.864 %
gap out of spec 9.000 52.000 10.227 % 59.091 %
scratch /crack/ dam 8.000 60.000 9.091 % 68.182 %
broken glass/mat 5.000 65.000 5.682 % 73.864 %
missing display 6.000 71.000 6.818 % 80.682 %
assembly defect 4.000 75.000 4.545 % 85.227 %
plastic deformed 4.000 79.000 4.545 % 89.773 %
no function 4.000 83.000 4.545 % 94.318 %
poor printing 5.000 88.000 5.682 % 100.000 %
But Create on universe connect to this bw query, I used QAAWS and WEBI to runat , TotalQty1,Rate1,TotalRate1 key figure values are Qty value, that is error:
TSAS defect1 Qty TotalQty1 Rate1 TotalRate1
weight inaccuracy 33 33 33 33
poor function 10 10 10 10
gap out of spec 9 9 9 9
scratch /crack/ dam 8 8 8 8
broken glass/mat 5 5 5 5
missing display 6 6 6 6
assembly defect 4 4 4 4
plastic deformed 4 4 4 4
no function 4 4 4 4
poor printing 5 5 5 5
pho:
BW QUERY: [http://space.itpub.net/attachments/2010/04/10339719_201004211645561.thumb.jpg|http://space.itpub.net/attachments/2010/04/10339719_201004211645561.thumb.jpg]
WEBI:[http://space.itpub.net/attachments/2010/04/10339719_201004211637351.thumb.jpg|http://space.itpub.net/attachments/2010/04/10339719_201004211637351.thumb.jpg]
QAAWS:[http://space.itpub.net/attachments/2010/04/10339719_201004211637591.thumb.jpg|http://space.itpub.net/attachments/2010/04/10339719_201004211637591.thumb.jpg]
Why? BO can't sustain bw query : create new calculate Key Figure ?
Who to figure out this question?
Because I can't to do create new calculate Key Figure in webi or Xcelsius ,So ,I create new calulate Key Figure on BW QUERY.
Thank you.
BestRegards,
Howard.
Edited by: flying on Apr 21, 2010 10:48 AM

HI Ingo,
 Didier Mazoue say universe accept bw query Restricted KF and calculated KF :
 [ Restricted and calculation keyfigures| Restricted and calculation keyfigures]
 Why I create new Restricted KF and calculated KF for bw query, QAAWS,WEBI are can't return ok datas for new Restricted KF and calculated KF ?
I create KF on Universe :
 select ued : <EXPRESSION>@Select (Key Figures\Qty)</EXPRESSION> OR <EXPRESSION>SUM(@Select (Key Figures\Qty))</EXPRESSION>
parse error: Parse failed:Invalid definition(UNV0023)
 Thank you.
Regards,
Howard.
Edited by: flying on Apr 23, 2010 6:00 AM

How do I access and use my Itunes library from a different/new computer?

How do I access and use my Itunes library from a different/new computer? My computer is no longer working, so I need to be able to access my library from my wife's computer.

Your library will only be where you put it. Copy everything from your backup copy of your old computer to the new one.
You can redownload some itunes purchases in some countries:
Download past purchases - Apple Support

Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for

HI ALL,
ERROR - Key figure <> 0 not allowed for unit ' '; see long text
Diagnosis
 The unit/currency ' Source unit MEIN ' with the value 'space' is
 assigned to the key figure ' Source Key Fig. DIFF ' with the value '
 4240.000- '.
System Response
 A key figure that is not equal to 0 and for which no unit/currency is
 set has an inconsistent data state. The data record is not processed.
Procedure
 Correct the source data.
Procedure for System Administration
Please guide
BR
Prasad

Hi ,
First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
4. Activate the DTP's (Both Normal and Error) .
After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
Ideally these records should be rectified in the Source system .
Thanks
Kamal

How do I move a project from one library to a different existing library in Aperture 3.2.3?

How do I move a project from one library to a different existing library in Aperture 3.2.3?

Export as a Library, then import into the second (already existing) Library.
From the User Manual:
In the Library inspector, select the items you want to transfer, then choose File > Export > Items as New Library.

How to model a non key figure numeric field

I am new to SAP BI, so please acceopt my apologies if I am asking a very basic question.
I have some numeric fields which are attributes of master data. These fields are not key figures and will not be aggregated. How can I model this in BI? I have to keep them as numeric fields because they may be used in some calculations at reporting.
Thanks!

You can display them as display attribute along with your main infoobject in query.
or
Model it using replacement formula variable by using attribute value as in this [Help|http://help.sap.com/saphelp_nw04s/helpdata/en/03/6ba03cc24efd1de10000000a114084/content.htm] doc.
Hope this helps.

How to build new basic key figures in library 4FM for different local curre

Similar Messages

Maybe you are looking for