How to build/run the SampleVideoPlayers in Flex Builder

The source for building the Flash Player and AIR Sample Video Players using Adobe Flex Builder 3.2 is located \Sample Video Players\Flash Player\Source and \Sample Video Players\AIR\Source respectively.
Flash Player Runtime
(Mac and Windows)
• Copy the file playerglobal.swc located in the Sample Video Players\Flash Player\playerglobal.swc folder to <FlexBuilderInstallDir>\sdks\3.2.0\frameworks\libs\player\10 folder.
• Copy the Player source folder located in \Sample Video Players\Flash Player\Source to your local hard drive.
• Launch Flex Builder and import the project.
• Select the SampleVideoPlayer_FP project.
• Go to Project - Properties - Flex Compiler to make sure you are using the Flex 3.2 compiler.
AIR Runtime
(Mac)
• Mount Mac_AIR_2.0_SDK.dmg.
• Copy the SDK files using the command:
ditto /Volumes/AIR\ SDK /Applications/Adobe\ Flex\ Builder\ 3/sdks/3.2.0/
• Copy the file airglobal.swc located in the Sample Video Players\ AIR\airglobal.swc folder to <FlexBuilderInstallDir>\sdks\3.2.0\ frameworks\libs\air folder.
• Copy the AIR source folder located in \Sample Video Players\AIR\Source to your local hard drive.
• Launch Flex Builder and import the AIR project.
• Select the SampleVideoPlayer_AIR20 project.
• Go to Project - Properties - Flex Compiler to make sure you are using the Flex 3.2 compiler.
(Win)
• Copy the files in Win_AIR_2.0_SDK to to <FlexBuilderInstallDir>\sdks\3.2.0\.
• Copy the AIR source folder located in \Sample Video Players\AIR\Source to your local hard drive.
• Launch Flex Builder and import the AIR project.
• Select the SampleVideoPlayer_AIR20 project.
• Go to Project - Properties - Flex Compiler to make sure you are using the Flex 3.2 compiler.

Thanks for your replies.
Could you please let me know where genarated AS files will reside in Flex builder ?.
Thanks
Praveen.

Similar Messages

Cannot run the samples in Flex Builde beta 3

The installation of Flex Builder finished OK. I did choose to
install Flash 9.0 in both IE and FF, but for some reason when going
to the examples it asks me to install Flesh 8.0. Even if I say yes
to th eprompt it doesn't display.
I have even re-installed the flas Active X manually and even
regieterd it as per instructions on the Installation of Flex
Builder 2.0 beta 3 page,, but still no luck...
Any help is appreciated.
Thanks

P.S. I asked Chris Agruss (our build and installer guru)
about some
possible reasons why the Flash player installer might have
failed to
work for IE. I've attached his reply.
Rebecca - Adobe
Here are a few cases I know about where the ActiveX plugin
for FP won�t
be installed normally:
� IE is running at the time, and especially if activeX
has been run
� Outlook, or some other program that runs the IE
engine under the hood,
is running
� Older ActiveX version installed that needs some Dark
Magic, or
explicit uninstallation of some sort
In the first two cases, where IE is in use, the plugin will
normally be
installed after a reboot, but until then it will look as if
the
installation didn�t work.
-ChrisAg
Rebecca Hyatt wrote:
> My guess is that something went wrong with your
installation of Flash
> Player 9 in IE failed for some reason (?), and that you
have IE
> configured as the default browser on your system (so
that's the one that
> FB launches).
>
> Uninstalling/reinstalling (with IE not running) might
fix the IE/Flash
> Player install.
>
> Changing the default browser to Firefox would be an
alternative
> solution... FB would launch to Firefox instead, where
the install seems
> to have worked correctly.
>
> Rebecca - Adobe
>
> mikiM wrote:
>
>> We are stuck and no idea where to go from here.
>> System: Win XP Professional, sp 2 with the latest
patches
>> CFMX Developer Edition 7.01 with updater 1
>> Clean installation of Flex Builder 2.0 beta 3,
finished OK. During
>> the installation Had selected to install the new
flash player 9 for
>> both IE (6.1) and FF (1.5)
>> Flex Builder Opens OK and displays the help properly
>> Clicking on any of the examples asks me if I want to
install Flash 8,
>> Even if I choose yes it doesn't display anything and
if I select
>> another example it will ask me again.
>>
>> Trying to run the same examples in directly in IE
fails, but works in
>> FF.
>>
>> Thanks
>>
>> BTW this is from the installation log
>>
>> Installation: Successful.
>>
>> 484 SUCCESSES
>> 0 WARNINGS
>> 0 NONFATAL ERRORS
>> 0 FATAL ERRORS
>>
>>

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How SAP standard run the interest calculation in AR module

Dear expert,
would like to seek for your advise, how SAP standard run the interest calculation in AR module ?
Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation generate ?
What are the T-code for running the interest so that able to generate the interest posting according to baseline due date?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
Between, do you have any ideal the Interest Indicator ZB stand and reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
Please help.
Regards,
Karen

Hi,
Thank you for the promtp reply.
I still have query would like to seek for your advise.
1.Does the interest calculation generate the interest base on the dunning run?For example, the interest is only can be post/generated when there is dunning run and vise versa.
2.What are relationship between interest calculation generate ?Does interest generation depand on the dunning run?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
3.Between, do you have any ideal the reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
4.For posting use F.2B and that will calculate interest on open items of customers. Does this posting is post as noted item or posting document? Beside, do we every day need to run this posting F.2B in order to update the AR interest calculation report and post the interest for the overdue invoice?
5.Do you have any reference link/document /SAP notes on calculate interest on arres F.2B?
a)How the program calculate those overdue invoice for example: does sap calculate the interest base on interest + due amount until the customer made the payment?
b) If customer made payment on the due amount and not the interest and vise versa? How theF.2B program logic work on the calculation ?
Please help.
Regards,
KH

I recently purchased an HP officejet 6600 and whenever I put in the disk to install the printer nothing pops up. How do I run the disk on my 2011 MacBook Pro?

I recently purchased an HP Officejet 6600 and whenever I put the disk in to install the software nothing happens. How can I run the program to install it and get started using my printer???

You should be able to go to HP Web site and download the installer. It sounds like you got a bad CD.

How do I run the SW in single phase mode?

How do I run the SW in single phase mode?

All you need to do is to modify the FPGA example a little bit, as the below illustrations.

I have downloaded elements to my mac and it has installed. how do I run the program?

I have downloaded elements to my mac and it has installed. How do I run the program.

Hi David,
You can simply click on the application to launch it from the 'Applications' folder.

Downloaded the pdf converter to word....how do I run the program?

downloaded the pdf converter to word....how do I run the program?

Hi seang449,
Please let me know which software you purchased and for what OS? Is it Adobe Acrobat or Create PDF service?
After downloading the software you need to run the .exe file (WIN) / .dmg file (MAC) to install the application.

Help:How can I run the J2EE Client Application? Thanks

Help:How can I run the J2EE Client Application that will access the remote J2EE1.4 application server which runs on another host computer?
I have developped a stateles senterprise java bean name converter and deloyed it in the j2ee1.4 application server on the host machine A. The converterbean provides the remote home interface and remote interface. At the same time I have developped the j2ee application client named convertappclient. When I access the conveter bean at host computer A through the script 'appclient.bat' as 'appclient -client convertappclient.jar', the client can access the bean sucessfully. Now I want to access the bean through the script 'appclient.bat' at host computer B,what files should I copy from host computer A to host computer B;and what the command line should be like? Thanks!
The following are the code of the enterprise java bean and it's home interface .
The client code is also provided.
The enterprise java bean:
package converter;
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.math.*;
public class ConverterBean implements SessionBean {
BigDecimal yenRate = new BigDecimal("121.6000");
BigDecimal euroRate = new BigDecimal("0.0077");
public ConverterBean() {
public BigDecimal dollarToYen(BigDecimal dollars) {
BigDecimal result = dollars.multiply(yenRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public BigDecimal yenToEuro(BigDecimal yen) {
BigDecimal result = yen.multiply(euroRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public void ejbCreate() {
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext sc) {
The bean's remote home interface :
package converter;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface ConverterHome extends EJBHome {
Converter create() throws RemoteException, CreateException;
The bean's remote interface:
package converter;
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
import java.math.*;
public interface Converter extends EJBObject {
public BigDecimal dollarToYen(BigDecimal dollars) throws RemoteException;
public BigDecimal yenToEuro(BigDecimal yen) throws RemoteException;
The j2ee application client:
import converter.Converter;
import converter.ConverterHome;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.rmi.PortableRemoteObject;
import java.math.BigDecimal;
public class ConverterClient {
public static void main(String[] args) {
try {
Context initial = new InitialContext();
System.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
System.setProperty("java.naming.provider.url","jnp://10.144.97.250:3700");
Context myEnv = (Context) initial.lookup("java:comp/env");
Object objref = myEnv.lookup("ejb/SimpleConverter");
ConverterHome home =
(ConverterHome) PortableRemoteObject.narrow(objref,
ConverterHome.class);
Converter currencyConverter = home.create();
BigDecimal param = new BigDecimal("100.00");
BigDecimal amount = currencyConverter.dollarToYen(param);
System.out.println(amount);
amount = currencyConverter.yenToEuro(param);
System.out.println(amount);
System.exit(0);
} catch (Exception ex) {
System.err.println("Caught an unexpected exception!");
ex.printStackTrace();
}

Surprisingly I find an upsurge in the number of posts with this same problem. I recently found a post which gave a nice link for this. Follow the steps and it should help:
http://docs.sun.com/source/819-0079/dgacc.html#wp1022105

Unable to run the form from Form Builder 10g

HI,
I am having a problem with running a form with form builder 10g.
I have create a form with some text boxes to display values in a table.
When i compile and run the form it does not run The error shown is
HTTP 403(Forbidden) You are not authorised to view this page.
The Link used for the above is:
http://127.0.0.1:1740/sWuCqhMKUT1btA1N5cXLCRshkJzmgKRIlCEUFd9RL520LVq0
The port number 1740 changes everytime. I dont know why.
I have started the OC4J instance before starting the Form Builder.
I have made the changes to the runtime preferences in the form builder.
http://localhost:8889/forms/frmservlet
But it doesn't work when i try to run the form from Form Builder.
ie Program-->Run Form
The form works properly when using the 'Run a form on the Web Utility' provided with Developer Suite.
Can anyone please suggest a solution. I have searched the forum but didnot find a solution.
Thanks
V.S.

One of our DBAs has installed the software.
It was a default installation, I believe, as no configuration was done during the installation except for increasing the virtual memory size.
Post installation we changed the tnsnames.ora file and the sqlnet.ora file.
Do i need to configure something ?
Thanks,
V.S.

How do i run the disk utility to repair permissions:confused;

how do i run the disk utility to repair permissions
i think i hav the same problem as you all iv been
restarting and deleting and renstaling but nothing seems to work
the only thing i havent don is this repair prmission
thing can someone type some instuctions on how or lead me where to
go

are you using mac OS10.2 or later?
if so, this is what I did to solve this most frustrating
problem. Go to Applications/Utilities/Disk Utilities
In the Disk Utility window, click on your hard drive, make
sure you're in the First Aid tab, then click on Repair Disk
Permissions.
Once the permissions were repaired, I took the advice of
another user here on the forum and reinstalled Flash Player 6, as
it was the one that was working before I tried to upgrade and it
screwed everything up.
Hope this helps

How do you run the optimizer with fixed orders?

Hi experts,
If the planner wishes to prioritize orders based on the customer demand, orders should be set as fixed.
How do I run the optimizer when using fixed orders??
Regards,
Analía Nahmías

Hi Analia,
Will you please elaborate more ?
It looks you are running SNP optimizer and want to use also make use of order prioirty functionlity.
You may be knowing already the contents below :
We know that Demand Prioritization functionlity is handled differently in SNP CTM and in SNP Optimizer.
In SNP CTM, Demand can be sorted by different sort criteria.
Whereas in SNP-Optimizer, Demand can be aggregated for three demand classes or by customer locations.
We set prioirties on the SNP Optimizer profile Maintenance for demand classes ,
1. Sales orders
2. The Corrected demand forecast
3.The demand forecast
Apart from this, we can set flag for priority of location products
The optimizer considers the priority of location products in combination with the priority of priority classes of the demand. To simplify this combination, we must group the priorities of the location products into three classes.
Within every priority class as above, the APO system uses all available cost information to determine the final solution
With the above way, planner does not have to fix an order.
regards
Datta

How can i run the example programme without hardware

Hi,
We are using NI-9233 for our Project. We would like to run the example programme, the NI-9233 getting started(host).vi ... I would like to ask that how can i run the Programme without Hardware.& How shall i get the input signal (simulating signal)?because we would like to test it while we are waiting for the hardware to be delivered .
thanks
Best regards

As Mike indicated , " you can use MAX to simulate some (not all) DAQmx devices. There's a NI-USB-9233 device that you can probably use. Open MAX, then expand "My System", the expand "Devices and Interfaces", then right-click on "NI-DAQmx Devices" and select "Create New NI-DAQmx Device -> NI-DAQmx Simulated Device". Select the device from the list. See the online help for MAX for further help.
If you don't see "NI-DAQmx Devices" in MAX you need to install NI-DAQmx. You can download it from NI here. "
hi,
the link you gave me to download is "NI-DAQmx Devices" ... There is no software to download for Labview 8.2.1. So should i use 8.1 or 8.3 instead of 8.2.1 ? If not, can you tell me the CD no. that includes the "NI-DAQmx Devices" folder of Labview 8.2.1 version? Because we can get the cd from our school's component store. Thank you so much.
Best Regards,
Su

HT5246 How do you run the Flashback malware removal tool?

How do you run the Flashback malware removal tool?
Thanks

I am away from my computer and it is somewhat awkward to reply on an iPad.
> I had already done what softwater instructed. I've read that it deletes itself on other threads, but it's still in my Finder as a Device. That's what confused me, because it doesn't appear to have deleted itself.
Sorry, I wasn't clear. That is not the tool. It is the .dmg image mounted to your desktop. Next to the name you will see a small eject icon. Click on it or highlight it and choose "Eject" from the appropriate Finder menu. Once that happens you can drag the .dmg file to the trash as it will not delete itself.
> I only recently upgraded to Snow Leopard and then Lion, in quick succession. My understanding is that there were (are) variants that would have infected my computer prior to my upgrading my OS to Lion. Before the upgrade, they were Adobe, but afterward they were Java. Could it be that be that the pop-ups were/are some other variant?
Difficult to say for certain. Apple says it deletes all the common variants but does not specify which and I haven't seen the results of any testing done to verify that it finds and deletes those. The only dialogs that appeared with the initial variants were for FlashPlayer. They are depicted in the descriptions for Flashback-A on F-Secures site if you want to take a look. There have been none that I am aware of for Java, so that is probably either a web page or application that needs Java to run giving you that alert.
> If the Flashback malware removal tool didn't find anything and my Software Update is current, does that mean the vulnerability has been fixed? At least for now? I understand that I Software Update will prompt downloads in the future if and when it needs to be patched again.
The vulnerability is in Java, nowhere else, so if you don't have it installed there was nothing to fix.
If you download Java in the future it will be the latest version Apple has available at the time, which hopefully will not be subject to exploitation, yet...

How can i run the java bean sample program download from OTN

hello to all
i have a p[roblem. i have downloaded the sample progam from oracle web site which is a java code that connect with the oracle and shows a form. how can i run the from.
can any body help me pleaSEEE
thanks
kamran ahmed

Hi Darryl.Burke
So your telling, we cannot run our Java Program when system shutdowns...In my application, when user has schedule for next days and he shutdown his PC. On the next day when System Started i should able to get back my schedule on the Specified time(I'm TimerTask class in Java)... How can i achieve this using Java? can u tell me clearly..

How to build/run the SampleVideoPlayers in Flex Builder

Similar Messages

Maybe you are looking for