How To Build SNMP Subagents For SNMPDX?

Hello,
Could anyone point me to any Sun provided libraries or developement tools used to develope SNMP subagents that work with the SNMPDX Solaris daemon?
I know that subagents can be developed via. 'net-snmp' however net-snmp requires it's own 'snmpd' daemon to run in the background in addition to the SNMPDX daemon.
Thanks,
Randy

Hi Timo
Thanks for your reply.
I have successfully created ear file using ojdeploy on jenkins. however when am trying to auto deploy using WLDeploy ant task am getting the following
error :
weblogic.application.ModuleException: :oracle.mds.config.MDSConfigurationException:MDS-01335: namespace "/oracle/webcenter/quicklinks/scopedMD" mapped to metadata-store-usage "WebCenterFileMetadataStore" but its definition was not found in MDS configuration
Please advise how to handle this.
As am a newbie to ADF, could you please advise if it is possible for the ADF application deployments can be automated for different environments using jenkins due to this MDS dependencies.
Appreciate your help.
Thanks
Shiva

Similar Messages

How to configure SNMP agent for Oracle 10g

Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles

Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles

How to build ear files for ADF application using Ant task

How to build ear files for ADF applications using Ant. The ojdeploy ant task can not find application-level deployment profiles. I am trying to automated build and release for ADF application.
Any help is highly appreciated.
Thanks
Shiva

Hi Timo
Thanks for your reply.
I have successfully created ear file using ojdeploy on jenkins. however when am trying to auto deploy using WLDeploy ant task am getting the following
error :
weblogic.application.ModuleException: :oracle.mds.config.MDSConfigurationException:MDS-01335: namespace "/oracle/webcenter/quicklinks/scopedMD" mapped to metadata-store-usage "WebCenterFileMetadataStore" but its definition was not found in MDS configuration
Please advise how to handle this.
As am a newbie to ADF, could you please advise if it is possible for the ADF application deployments can be automated for different environments using jenkins due to this MDS dependencies.
Appreciate your help.
Thanks
Shiva

How to build an .exe for cFieldPoint on a PC ?

Hi all,
A couple of weeks ago I installed a system with a compact FieldPoint running a in RT mode (cFP 2020 and LV 7.1.1).
To load the .exe on the cFP, I connected my PC to the cFP (ethernet), selected the cFP as execution target for LabVIEW and then opened the application builder. I assume this is the normal way to do... but is this the only way ?
In fact, my customer is asking for some more features, so my question is quite simple :
Can I build an .exe for the cFP on my PC (without connecting to the cFP target), mail it to the customer and tell him to replace the .exe file on the module ?
Thanks for any help
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Hi Kahlid ,
I noticed you were reply someone on pretty much close to same problem whatever i am having , I am working on LabVIEW8.2 with cFP. I created a project with an executable (run from My Computer), the other executable is running in the field point , I used shared variable to transfer data from field point to host program. Now I want to Uninstall LabVIEW from the same computer but want to keep MAX and one .exe file to run host VI. How to do that , any suggestion about copying or moving only .exe file ? or lets say if I want to run the same program in another new PC with same Field Point hardware and program how to copy/install executable in the new PC?
Thanks and best regards,
Faiyaz Syed

How to build sql query for view object at run time

Hi,
I have a LOV on my form that is created from a view object.
View object is read-only and is created from a SQL query.
SQL query consists of few input parameters and table joins.
My scenario is such that if input parameters are passed, i have to join extra tables, otherwise, only one table can fetch the results I need.
Can anyone please suggest, how I can solve this? I want to build the query for view object at run time based on the values passed to input parameters.
Thanks
Srikanth Addanki

As I understand you want to change the query at run time.
If this is what you want, you can use setQuery Method then use executeQuery.
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/oracle/jbo/server/ViewObjectImpl.html#setQuery_java_lang_String_

How can build help file for right to left and non english language

hi erverybody, i have a big problem ,please help me
i creat a c# appliction with vs.net2005 and i want to write
help file for it .i need a software to creat help file for non
english language(such as persian or arabic) and right to left
support . i tried many helpware chm builder tools but each of them
made a problem .i dont know what to do .what is the best solution
for creating help files for right to left and non english languages
how can i build my help file with f1 helping ability .thank u
so much
Text

Hi Mr_Sia and welcome to the RH community.
You could try looking at the HAT Matrix. This is a comparison
of all the help tools around. Click
here to go to it.
RoboHelp itself, whilst it does support over 35 different languages
does not support Persian or Arabic.

How to build search help for company code (BUK) in SRM

Hello,
I am new to SRM and was wondering if any have come across similar requirement. I am a workflow developer and we are building a custom table to derive deadline escalation timelines. We are also adding a field in our custom table for company code so that we can have company specific deadlines. table T001 is empty in SRM and hence we are unable to use F4 (search help). Is there existing functionality in SRM that gets this search from the backend ECC system and displays when F4 is pressed. How can I use that functinoality?
Appreciate any info folks.
Thanks again.
Samir

Hi
Which SRM version are you using ?
Related links ->
Re: Search Help on SRM front end screen
F4 Help for WBS Element
Re: Company Code defaults
Re: Search help for Custom Item level field
Custom field in SRM as a dropdown field with values stored in R/3
Calendar help for Date i/p field in SRM 5.0 shopping cart
Company code
Problems assigning values via F4 or search help
Also There is a standard table in SRM which contains Plant data ->
BBP_LOCMAP (Mapping Table Business Partner --> System --> Location)
Try creating a custom search help based on this Table, defined as selection method and assign the same to the related field.
Do let me know.
Regards
- Atul

How is the SNMP support for multiple instances

Hi,
I have two instances of WebLogic Server 5.1 running on Solaris 5.8 node.
How can get the details thru SNMP for both instances. I was able to
start only one instace of SNMP agent at any time. Is there any solution
Any help is appreciated. Thanks.
--sreeni.

You can provide URLs of both servers to one SNMP agent, via the -serverURLs
option.
Sreeni Gaddam <[email protected]> wrote in message
news:[email protected]..
Hi,
I have two instances of WebLogic Server 5.1 running on Solaris 5.8 node.
How can get the details thru SNMP for both instances. I was able to
start only one instace of SNMP agent at any time. Is there any solution
Any help is appreciated. Thanks.
--sreeni.

How to build struts portlet for DispatchAction?

hi,
I'm building struts portlet which wrap up a struts module, and it works fine for ordinary struts Action class, but for struts DispatchAction class, it doesn't work, the corresponding method never called.
could any one here help me out?
thanks

I am trying to implement your solution.
I have a portlet for navigation on the left side and the inline rendering on the right. My left side url's keep rendering outside of portal. Also can't figure out how to make the inline rendering portlet grab the url from the navigation portlet. (In your post you mentioned that your portlet would display whatever URL was passed to it.)
Can you provide more detail on the steps you took to make this happen?
Thanks

How to build customized screens for Master Data Users

Hi all,
I need to build screens on top of centrally managed master data hub (Data Manager). I want to confirm following
1) Should I go with Guided procedure (CAF) and pre defined Portal contains provided by SAP for MDM?
2) Should I use Java API's provided with SAP MDM.
License is not al all the issue. We have the entire NW components in place. But not sure what to use and what are the advantages/disadv???
Please share your views....
Thx,
R.n

Hi,
I would suggest GP would be easier and in this you can integrate with ur customised objects also.
Vinay

How to Build a Preloader for Flash CS4 and Actionscript 3.0

With the wonderful help of many people on this site, I have successfully buit a nice website using Flash CS4. I am wanting to deploy the site this weekend and I'm working on the finishing touches. I would like to add a preloader so that the viewer will have everything loaded when the action starts. Can anyone suggest a good tutorial that shows how to make the simple "rotary lines" that are so popular? I've seen these and they look to be about an inch across and move like the hands of a clock. I think it may even say "Loading..." or similar. Since I'm still learning quite a bit, I did not know if Flash actually offers some "preloaded" tools for stuff like this? Or am I better off going to Lynda.com and taking a tutorial? Thanks for the help!

Dark Armor, You mentioned the book Adobe Flash CS4 Professional Classroom in a Book, which I have. I could not find anything in there. Did you mean to say Actionscript 3.0 for Adobe Flash CS4 Professional? I do have that book and it looks like there is information there. Just wanting to make sure that you meant what you said. Thanks!

How to build online help for froms

dear colleague,
i need to build an on online help based on word file, meanwhile i need to facilate the search ability in this help and table of content also, can anyone help in how to devlope this function??

Maybe this solution could help you.
Francois

How to build MDX query for two periods of time?

I have the following MDX:
SELECT NON EMPTY
[Measures].[Returns],
[Measures].[Returns]
ON COLUMNS,
NON EMPTY
([Employees].[Company].[Company].ALLMEMBERS )
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM
SELECT
STRTOSET("[Exec Date].[Hierarchy].[Month Num].&[2014]&[1]", CONSTRAINED)
) ON COLUMNS FROM [cbSales]
WHERE
IIF(
STRTOSET("[Exec Date].[Hierarchy].[Month Num].&[2014]&[1]", CONSTRAINED).Count = 1,
STRTOSET("[Exec Date].[Hierarchy].[Month Num].&[2014]&[1]", CONSTRAINED),
[Exec Date].[Hierarchy].currentmember
Both columns shows returned data for month 2014/01
I want to have data for the next month (2014/02) in the second column.
How can I change the query to achieve my goal.

Hi,
To achieve this you need to create another measure with the help of ParallelPeriod function. Check the following example;
WITH MEMBER [Measures].[Sales Amount Current] AS [Measures].[Sales Amount]
MEMBER [Measures].[Sales Amount Next] AS ([Measures].[Sales Amount], PARALLELPERIOD([Date].[Calendar].[Month],-1, [Date].[Calendar].CURRENTMEMBER)), format_string = "Currency"
MEMBER [Measures].[Current Month] AS [Date].[Calendar].CURRENTMEMBER.Member_Caption
MEMBER [Measures].[Next Month] AS PARALLELPERIOD([Date].[Calendar].[Month],-1, [Date].[Calendar].CURRENTMEMBER).Member_Caption
SELECT {[Measures].[Current Month], [Measures].[Sales Amount Current], [Measures].[Next Month], [Measures].[Sales Amount Next]} ON COLUMNS,
{[Product].[Category].[Category].MEMBERS} ON ROWS
FROM [Adventure Works]
WHERE [Date].[Calendar].[Month].&[2007]&[10]
For ParallelPeriod specify -1 for "Numeric Expression" to navigate forward of the date hierarchy.
Best regards,
Chandima
Thanks, nice answer

Digital Steganography: How to Build a VI for Academic Purposes

Hi,
I teach at a High School, and as part of the course the kids are interested in encryption. We discussed digital steganography and I wanted to be able to do a labview lesson where we discuss and write a VI. What I would like to do is have two VI's. One that writes data into a picture and in the process can change change color hues (if needed) and a second VI that compares two pictures to pull the differences out to reveal the hidden information. For my purposes it doesn't matter if the hidden information is binary or ASCII.
Our school has two versions of LabView. We have the education edition and we have the version used with the infinity project. (Both should have full functionality.) If there is any difference in the directions, education edition directions are preferred.
Sorry, but I have no idea how to begin this or what to do. I'm still new to and learning LabView as we go. I searched steganography and the other topics were not helpful. I would really appreciate any and all help.
Thanks.

While this is hardly military grade encryption I think you could illustrate your point with code like this.
Encode stage:
Decode stage:
This approach relies on the image being big enough to hold all the text. You could be more efficient if you use every color value (I only used blue to keep the diagram looking clean). The code isn't terribly robust (no error checking, doesn't check to see if there is space to encode the full message, etc) and I haven't tested it short of confirming that I could get a simple message back but it should help you on your way.
Good luck -- sounds like a fun class. I wish I got to do stuff like this when I was in high school.
~Simon

How to build SSIS package for SAP BPC 5.0

Is the above how paper apply to BPC 5.1?
I also have two questions:
1.As we know in the Data Manager 5.1 user guide indicate that we use DTS to manage SQL Server 2000 packages,and SSIS to manage SQL Server 2005 packages.
Also in the guide, when it discuss about the data manager package, it only reference DTS, is all the DTS package discussed in that guide apply to SSIS?
2. from BPC 7.0 NW, the BPC is part of NetWeaver , what role SSIS is play here, since we know that a lot of customer of not use SQL Server as their database.

Hi JW,
The answer to your question #2 is that we won't have SSIS packages in BPC7NW since all SQL server based functionality won't be there in Netweaver version. If you use migration tools to migrate from BPC5.x to BPC7NW, it can convert SSIS packages. However any custom SSIS code would have to be converted manually. For more information, please read Ryan's blog at SAP's definitive strategy for planning technologies moving forward: What's the word on BPC, BI-IP and SRC?
Regards
Pravin

How To Build SNMP Subagents For SNMPDX?

Similar Messages

Maybe you are looking for