How to build the Logical cube and physical cube

Hi All,
I have to build the logical cube and physical cube ,i dont have idea about this ,that means i think for that we have to do the partition for the cube
may i correct , correct me if i wrong ,plz help me on this
Thanks

Hi,
1. Firsty, logical model and physical model are the terms ,which we generally use in the context of database modelling excercise.
2. Coming to essbase, I am not sure ,what exactly you are trying to co relate . but as you termed 'partitions'. There is one of the types in partitioning called 'Transparent Partition'. Where, you have one cube ( which has data in it) and you can have one mroe cube ( which actually has no data in it). But it can be connected to the former cube with the help of transparent partition. This way, you have 2 cubes , but only one cube has data in it.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Similar Messages

What are the logical structure and physical structure in oracle

what are the logical structure and physical structure in oracle and how can allocate a DB block size as default size is 8192?

From the Concepts Guide
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm
The physical structures are:
Datafiles
Control Files
Redo Log Files
Archive Log Files
Parameter Files
Alert and Trace Log Files
Backup Files
The Logical Structures are:
Tablespaces
Oracle Data Blocks
Extents
Segments

How and where I can build the logic to calculate between cal days?

Hi
I have the cube having data like below. When I run the report based on calendar day as input, I would like to get output data how many Line Items based on my selection (status, Trans status) from between calendar day to calendar day+150 days.
0Calday     Sold-to-Party           Status                 Trans No     Trans Status      Line Items
03.10.2008     2000028074     50     216270          28                       1
05.11.2008     2000024917     40     216281          15                       1
06.10.2008     2000006277     33     216292          28                       1
15.12.2008     2000019927     33     216303          10                       1
If I provided calendar day as input at query how and where I can build the logic u201Cbetween calendar days to calendar day+150 daysu201D?
For example, If I run a report as caleder input 03.10.2008 with selections status = 40,33, Trans statu =15,10, with above data, I can get the output below.
05.11.2008     2000024917     40     216281          15                       1
15.12.2008     2000019927     33     216303          10                       1
Please help me to build the above logic?
Thanks,
Mannev

Hello,
There are some informtion in SDN that can be useful regarding customer exit for variables in BEX, for example:
need clarification on BEX variable usage in customer exit.
you can also try to use the variable offset:
variable offset in Bex
Best Regards,
Ricardo

How to build the FM data I_header and I_orgdata

hi all,
Im working on the conversion program for AVL using the following function modules
BBP_PD_AVL_GETLIST
BBP_PD_AVL_CREATE
BBP_PD_AVL_UPDATE
BBP_PD_AVL_SAVE
In the function module BBP_PD_AVL_CREATE , how to build the FM data I_HEADER and I_ORGDATA.
I'm giving 3 input in Export parameter in BBP_PD_AVL_GETLIST and E_pdlist should contain data .
but e_pdlist is not getting data...any suggestion..
after execution it was showing "Buffer table is not up to date"
with regards,
P.lokesh

Hi Lokesh,
We are also encountering same problem.
How did you solve your problem?
Would really appreciate your help.
Thanks,
Kezia

What is the difference between logical ROWID and physical ROWID

hello
can u please explain the difference between logical ROWID and physical ROWID
regards,

from the docs (a 30 sec search)
Physical rowids store the addresses of rows in ordinary tables (excluding index-organized tables), clustered tables, table partitions and subpartitions, indexes, and index partitions and subpartitions.
Logical rowids store the addresses of rows in index-organized tables.

I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?

I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?
Message was edited by: davidjsousa

Of course

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

How to create the logical file name

Hi All,
    I have requirement where i need to post the Inventory Management data. for this i need to execute std. program RM07MMBL which is having logical file name in the selection screen. but i have placed my input file in application server.
   Can any one tell how to create the Logical filename which refers the physical path. I also tried <b>t-code SF01 & Table - FILENAMEC</b>I and found that we need to add an entry in this table but i really dont know how we have to do since this table cannot be maintained in SM30 also..
Help Me.
Thanks in Advance!...
Regards,
Ramkumar

Hi Ram,
Try using FILE transaction code...
Follow these steps to create:::
Double click on Logical file Path Definition
Click on New Entries,
Give Logical file Path name as Z_LOGICAL PATH and save it
now choose this path and double click on Assignemt of Physical path to Logical path
double click on the OS name
Give some description and give some Physical path name from AL11 transaction and save it
Now Double click on Logical File Name Definition,
Click on New Entries,
Give some logical file name: Z_LOGICAL_FILENAME
Physical file: test
Data Format: BIN
Logical Path: Z_LOGICAL PATH
Hope this helps
Regards,
Phani
Message was edited by:
        Sivapuram Phani Kumar

How 2 Set the logic for report 2 run 1st of everymonth......

Hi Experts,
i ve developd a HR-ABAP report in that Some part of code will Mon-Fri, Excluding Public holidays and sat & sundays...( i.e no public holidays and no sat & sundays)
and some part of should Run on 1st of everymonth.... but 2 parts of code should be in same report..
How can set the logic to run the report respective times....
Thanks in Advance....
sudeer.

you can code this but need some good expertise on fm's , date handling techniques and subroutine call coding.
1.
to make the code run only on 1st of every month
capture the rundate of ur prog .. take value of sy-datum
ex.. 01.xx.yyyy
or date std will be yyyymmdd so check for dd = 01 ..
so per logic first two chars show that its first of any month in any year ..
if yes
execute the logic for the first of every month ..
endif.
2.
where the code needs to be run on mon-fri and not on public holidays / sun / sat ..
first fetch the day based on date .. like mon or tue or wed .. except sat and sun..
second check whether if m-t-w-th-fr if any of them is a holiday or not
u need to check the date in the calender list like tholi thoc and .. to check whether that is a holiday or not ..
coming to sat and sundays .. u need to check the day for date using function modules and build the logic ...
br,
vijay..

Please help me to build the logic

Hi All,
Please help me to implement the following logic.
The conditional statements should not only be executed in sequence, but also if any of them are true they should not be overridden by any subsequent conditional statements being true.
When actual effort Accepted or Rejected for AST proposals and calculate a flag for “enhance to AST guideline” = Y/N as follows for each employee and display at the employee level
1)If AST eligibility = N AND proposed AST % >0, then “N”
2)Else If AST eligibility = N AND proposed AST % = 0 then “n/a”
3)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST = 0 then “Y”
4)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST >0 then “N”
5)Else If AST eligibility = Y AND Act Rank = 2 AND proposed AST = 0 then “Y”
6)Else If AST eligibility = Y AND AST % is greater than or equal to the AST guideline minimum AND less than or equal to the AST guideline maximum, then “Y”
7)Else If AST eligibility = Y AND AST % is less than the minimum guideline OR greater than the maximum guideline, then “N”
I tried the following code but I am not getting the expected result .
Could you Please help me to build the logic.
Your earliest response is very helpful to me.
if (upper(P_stat)='ACCEPTED' or upper(P_stat) like 'REJECTED%') then
else if NVL(P_elgi,'N') <> 'Y' AND P_prop > '0' then
P_flag := 'N';
else if(NVL(P_elgi,'N') <> 'Y' AND P_prop = '0') then
P_flag := 'N/A';
else if ((NVL(P_elgi,'N')='Y') AND P_rank = '3' AND P_prop = '0') then
P_flag := 'Y';
else if((NVL(P_elgi,'N')='Y') AND P_rank = '3' AND P_prop > '0') then
P_flag := 'N';
else if((NVL(P_elgi,'N')='Y') AND P_rank = '2' AND P_prop = '0') then
P_flag := 'Y';
Else if (P_prop >=ast_min_guide AND P_prop <= ast_max_guide ) then
P_flag := 'Y';
else
((P_prop < ast_min_guide) OR (P_prop > ast_max_guide)) then
P_flag := 'N';
end if;
end if;

Thanks for ur quick responce .
When actual effort Accepted or Rejected for AST proposals and calculate a flag for “enhance to AST guideline” = Y/N
Once the above condition is satisfied we have to check for remaing conditions
if (upper(P_stat)='ACCEPTED' or upper(P_stat) like 'REJECTED%') then
once it is satisfies then we have to go for remaing conditions.
how can we do it in CASE statement.
1)If AST eligibility = N AND proposed AST % >0, then “N”
2)Else If AST eligibility = N AND proposed AST % = 0 then “n/a”
3)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST = 0 then “Y”
4)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST >0 then “N”
5)Else If AST eligibility = Y AND Act Rank = 2 AND proposed AST = 0 then “Y”
6)Else If AST eligibility = Y AND AST % is greater than or equal to the AST guideline minimum AND less than or equal to the AST guideline maximum, then “Y”
7)Else If AST eligibility = Y AND AST % is less than the minimum guideline OR greater than the maximum guideline, then “N”
I tried the following code but I am not getting the expected result .

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

How to delete the logical lines in JTextArea

Hi all,
Now that I know how to find the logical line count in JTextArea as
I found the following in the forum.
public static int getLineCount (JTextArea _textArea)
boolean lineWrapHolder = _textArea.getLineWrap();
_textArea.setLineWrap(false);
double height = _textArea.getPreferredSize().getHeight();
_textArea.setLineWrap(lineWrapHolder);
double rowSize = height/_textArea.getLineCount();
return (int) (_textArea.getPreferredSize().getHeight() / rowSize);
I want to delete the 4th line to the last line and append ... at the 4th, if the getLineCount exceeds 3. Does any body know how to do so?
The intention is for the multiline tooltip as I just want to show
the first three logical line and ... if the string is too long.
Thanks
Pin

The code looks good to me. The only thought I have is that the y coordinate for the rowThree point is wrong and is referencing row four.
I've been playing around with using a JTextArea as a renderer for a JTable. I have it working so that "..." appear when the text exceeds 2 rows. Try clicking on "B" in the letter column and then the update cell button a few times to add text. My code is slightly different than yours.
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class TestTable extends JFrame
     private final static String LETTERS = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
     JTable table;
     Vector row;
     public TestTable()
          Object[][] data = { {"1", "A"}, {"2", "B"}, {"3", "C"} };
          String[] columnNames = {"Number","Letter"};
          DefaultTableModel model = new DefaultTableModel(data, columnNames);
          table = new JTable(model)
               public String getToolTipText( MouseEvent e )
                    int row = rowAtPoint( e.getPoint() );
                    int column = columnAtPoint( e.getPoint() );
                    if (row == 0)
                         return null;
                    else
                         return row + " : " + column;
          table.setRowSelectionInterval(0, 0);
          table.setColumnSelectionInterval(0, 0);
          table.setRowHeight(0,34);
          table.setRowHeight(1,34);
          table.setRowHeight(2,34);
          table.setDefaultRenderer(Object.class, new TextAreaRenderer(2));
          JScrollPane scrollPane = new JScrollPane( table );
          getContentPane().add( scrollPane );
          JPanel buttonPanel = new JPanel();
          getContentPane().add( buttonPanel, BorderLayout.SOUTH );
          JButton button2 = new JButton( "Update Cell" );
          buttonPanel.add( button2 );
          button2.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    int row = table.getSelectedRow();
                    int column = table.getSelectedColumn();
                    String value = (String)table.getValueAt(row, column);
                    value += value;
                    table.setValueAt( value, row, column );
                    DefaultTableModel model = (DefaultTableModel)table.getModel();
                    model.fireTableCellUpdated(row, column);
                    table.requestFocus();
     public static void main(String[] args)
          TestTable frame = new TestTable();
          frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
          frame.pack();
          frame.setVisible(true);
     private class TextAreaRenderer extends JTextArea implements TableCellRenderer
          public TextAreaRenderer(int displayRows)
               setRows(displayRows);
               setLineWrap( true );
          public Component getTableCellRendererComponent(JTable table,
                                         Object value,
                                         boolean isSelected,
                                         boolean hasFocus,
                                         int row,
                                         int column)
               setText( value.toString() );
               Dimension d = getPreferredSize();
               int maximumHeight = getRows() * getRowHeight();
               if (d.height > maximumHeight)
                    setSize(d);
                    int offset = viewToModel( new Point(d.width, maximumHeight - 1) );
                    replaceRange( "...", offset-3, getDocument().getLength() );
               return this;
}

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

Regarding the Logical Path and file name

Hi all ,
I am using LSMW for creating the BOM of a material .
I am getting problem at step 7 , saying the logical path is pointing to physical directory .
Then i did some R & D . I created the logical path and logical file name using transaction FILE . Then i got the physical path using FM file_get_name.
But when i give those logical path and logical file names , still i am getting prob.... at step 7 of lsmw.
Pls let me know . I did my best unti l now ....
Regards

Hi Raj,
Can you send the Error which you got at Step 7??
It would be of great help if you can send the File Path and the file names you have used.
Regards,
-Syed.

How to output the digital clock and synchronization signal from the NI USB-6211

Hello,
I need to connect the NI USB-6211 to control a digital to analog convertor chip (AD5541). However, this chip requires three input signals :1) Clock input, 2) Logic input or a synchronization signal and 3) Signal Serial Data input (CS, SCLK, DIN).
how to output the digital clock and the synchronization signal from the NI USB-6211?

Hi SaberSaber,
You should be able to use the counters to generate a pulse train that could be used for clock and synch purposes.
Hope this helps. Let us know if you have more questions.
Dave C.
Applications Engineer
National Instruments

How to build the Logical cube and physical cube

Similar Messages

Maybe you are looking for