How to burn .dmg to a partition?

Hi all,
I currently run 10.4, but I just downloaded 10.5 (from my work). I don't have a "dual layer DVD" to burn it onto, so I have to somehow burn the new OS onto a second partition, and then install it over 10.4. I have two partitions ready formatted as Mac Journaled (or something). One is running 10.4. When I go to Disk Utilities, I don't have the option to burn to a hard drive. It automatically selects MATSHITA DVD_R, which is no good. I don't want to purchase any software for that. I tried Super Duper, but the unregistered version only lets you back up files....
Any ideas how I can do that?

Thanks that worked!!!
Now onto solving other problems

Similar Messages

Can I burn .dmg files on a PC?

Hello. I'd like to know if anyone here has any ideas on how to burn .dmg or .img files on a PC.

I guess that means they are not going to work as copies of the installer CDs.
Do you have the facility to make the copies on a Mac? That would be your best bet. You can make copies on a Mac as follows:
Duplicate a CD or DVD
1. Insert the DVD/CD;
2. Open Disk Utility, and select the DVD/CD from the left side list (select the DVD/CD icon on top);
3. from the DU File menu select New | Disk Image from Disk 1;
4. Choose to format the disk image as DVD/CD Master, name the disk image and click Save;
5. When the .cdr file is finished select it with mouse and press COMMAND-I to open the Get Info and check the box to lock the file;
6. Choose the .cdr file from the left side list, click Burn, and insert a new, blank DVD or CD.

I recently installed the new operating system. iMovie doesn't seem to work the same as in Mountain Lion. I can't figure out how to burn a movie to a DVD. Has that feature been eliminated?

I am having difficulty figuring out how to burn my iMovie to a DVD. Has that feature been eliminated?

unbelievable... the amount of RAM is the issue... I found a post (http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8448) on an unrelated matter, but the user solved their issue under X64 by limiting the amount of RAM WinXP x64 was using by editing the boot.ini file.
The basis of the "trick" is to add " /maxmem=4096" to the end of your OS line, but I elected to copy the line and add it to a new entry so I could easily select which "mode" i wanted at boot.... like so...
multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition - X-Fi tweak" /noexecute=optin /fastdetect /maxmem=4096
amazingly this solved my issue... but now my system properties only report 2Gb instead of 4Gb... unacceptable!
When Can I expect a fix for this Creative?

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

How can I create a new partition to install Windows 7 by not using Bootcamp

How can I create a new partition to install Windows 7 by not using Bootcamp?

If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
Your question seems a bit blurry so I'm giving you a general tip here.
If you want to just try the beta you can always use Sun's "Virtualbox".

HT1479 I would like to know how to burn a dvd in such a way that each image can be skipped over by pressing the skip button.

I would like to know how to burn a dvd in such a way that each image can be skipped over by pressing the skip button? If anyone could help it would be greatly appreciated!

Here's how top get a slideshow that will let the viewer manually control the forward and backward movement of the slides with the forward and back buttons on the DVD remote.
1 - put the images you want to use in an iPhoto album.
2 - launch iDVD, select a theme and add a slideshow using the "+" button at the bottom:
3 - click on the Media button at the lower right hand corner of the window and then click on the Photos button.
4 - locate the iPhoto album containing your photos and drag it into the left hand pane:
5 - select Side Duration to Manual.
In order to get the maximum manual control of the slides you cannot have add any music to the slideshow. If you do add music the slideshow will continue you advance unless you pause the slideshow and/or use the advance/back buttons and then pause.
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

How can I remove the BootCamp partition? as the size i created ws too small to install MS Office on 64Bit Windows 8.1 on MacBook Pro (Aug'13)

How can I remove the BootCamp partition drive for Windows 8.1, as the size which I created was too small for me to install Microsoft Office onto Windows 8.1 64-BIt. The machine which I have is the MacBook Pro 13' inch purchased in August 2013.

Either use Paragon's CampTuneX to resize it or use Boot Camp Assistant to remove the partition and restore the drive to one partition. Then create a new, larger Boot Camp partition. This will remove/delete/erase your Windows system.

How To Format My XP Bootcamp Partition. Help!

Could anyone tell me how to reformat my bootcamp xp partition during installation? I have chosen a Fat32 24 Gig partition for XP and I am confronted time and again with a Disk Error - even though the disk is brand new and has been used on one other computer.

Hi there!
If it is an OEM disc as compared to a retail version, it will only work on one computer, not one at a time, but on only one machine. Is it an OEM disc?

How can I undo Converting Recovery Partition to Logical Drive (Oops...) - HP G62-b32sa???

I needed to create a new partition, but to do that Easeus Partition Master 9.00 Home Edition (I like using this compared to the Windows one..) stated that I needed to convert one of the 4 pre-made partitions from Primary to Logical. The following partitions were pre-made with my laptop, HP G62-b32SA, all of which were Primary:
*: SYSTEM
C:
D: RECOVERY
*: HP_TOOLS
I could only convert the "D: Recovery" to Logical, so I went ahead, and then could create a new partition. But now after reading several post on this Forum, I realised what a mistake that was. I found that that converting the Recovery partition to Logical renders it useless... "Oops" I said. Now I wonder that if I convert the Recovery partition back to Primary, will I be able to use it again, or has the damage been done? But then the other problem is that it won't allow me to convert the Recovery Partition back to Primary, claiming "there are no free MBR slots". Also, I have a feeling that I'll have to delete my newly created partition to convert the Recovery partition back to Primary, but then how do I create a new partition without converting any of the existing to Logical? Endless questions, I know. So now I ask, what is the best thing to do??
BTW this is my first HP Laptop...
This question was solved.
View Solution.

How to handle this situation, back up your personal data and use the HP Recovery Discs to restore the PC
Make your recovery discs now, use good quality DVD+R media
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01867124
Once you are back to normal partitions, see this thread on how to make another partition without damaging the other 4
http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/How-to-repartition-HDD-of-HP-notebook-with-...

I have a CD burner yet I cannot burn or copy on CD from my collection. When I click on File - burn to CD I get:"To burn to CD you require a CD writer - Please advise how to burn a collection on a CD Thank you Diane

Please advise how to burn a collection on a CD - When I click on File then burn to CD - I get:To burn CD you require a CD writer yet I have one - which I have used many times with another package. Also where are the pictures that I have put into a collection stored? I cannot find them. I can display them so they have to be stored somewhere in a file or folder etc...I am retired and very new at using this Adobe photoshop edition 3.2 Thank you for your help I am desperate.

Once the tracks are in your library, you can right-click and use the command Get Album Artwork. This command will attempt to match your track(s) to the item in the iTunes Store, and get the cover art.
If that command does not succeed, you will need a copy of the art in .JPG format, either by scanning your CD cover, or by getting it from the web. Once you have the art, right-click the track, choose Get Info, go the Artwork tab and paste it in.

How do I share an lvm partition between two systems?

Hi,
I have a regular system which I usually work from, and I created a lvm partition using that system to store files in. I have another Arch system on the same harddrive (different partition) and I would like to know how I can access the lvm partition using the second system.
I have the following in my new system
/dev/sda8 swap swap defaults 0 0
/dev/sda9 / ext3 defaults 0 1
/dev/sda5 /mnt/arch ext3 defaults 0 0
/dev/sda2 /mnt/boot ext2 defaults 0 0
/dev/sda6 /mnt/arch-home reiserfs defaults 0 0
/dev/ravilvg/lvmpartition /mnt/lvmpartition reiserfs defaults,users 0 0
When I try to mount '/mnt/lvmpartition', I get
[root@myhost ravi]# mount /mnt/lvmpartition/
mount: special device /dev/ravilvg/lvmpartition does not exist
I have put USELVM="yes" in my rc.conf, and on bootup I get the message that Device mapper is not in the kernel. 'lsmod' shows the dm_mod module is not loaded, but loading the module and running the mount command still does not work.
Here are the outputs of the lvm commands
[root@myhost ravi]# lvm pvscan
PV /dev/sda10 VG ravilvg lvm2 [24.20 GB / 0 free]
Total: 1 [24.20 GB] / in use: 1 [24.20 GB] / in no VG: 0 [0 ]
[root@myhost ravi]# lvm vgscan
Reading all physical volumes. This may take a while...
Found volume group "ravilvg" using metadata type lvm2
[root@myhost ravi]# lvm lvscan
inactive '/dev/ravilvg/lvmpartition' [24.20 GB] inherit
Thanks,
Ravster

Hi,
You were right, the solution was to simply activate the volume
What I did was
lvm lvchange -ay /dev/ravilvg/lvmpartition
The lvm partition is now accesible from both systems
Thanks for your help,
Ravster

How to use SQL OVER and PARTITION BY in OBIEE Expression Builder??

Hi there,
I want to create a new logical coulmn with the following SQL query.
SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )
How to use the OVER and PARTITION BY in OBIEE Expression Builder??
Thanks in Advance

hi bipin,
We cant use by in Expression builder(rpd) .But use the same formula like this in Fx of answers
SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) >OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )SUM(Inventory Detail.Qty by Detail,ITEM,Mydate)/SUM(qty by detail,item)
First check the numerator whether it was giving correct results or not then go with denominator
compare the results with sql that u have
Let me know if that does work
thanks,
saichand.v
Edited by: Saichand Varanasi on Jul 27, 2010 9:27 PM
Edited by: Saichand Varanasi on Jul 27, 2010 9:28 PM

How do I create a recovery partition on an HP EliteBook 2760p using Windows 7 64-bit Professional

I have an HP EliteBook 2760p using Windows 7 - 64-bit Professional
My original problem is that I couldn't create the Repair Disc
I found out that the problem was with a file that was on the recovery partition
I backed up the recovery partition from the same make and model computer
I reformatted the partition and recovered the backup to the reformatted partition
It didn't work
How do I create the recovery partition I have the 2 disks that came with the tablet PC

If you do a factory restore using HP recovery discs it will put everything back including recovery partition. I don't know if any way to manually re-create the recovery partition.
NOTE: back up your files as Factory Restore wipes ALL data.

How to burn .dmg to a partition?

Similar Messages

Maybe you are looking for