How to burn full hd clips onto dvd-r with Blu-ray burner to playback on a set top Blu-ray player?

hello,
Blu-ray media is still expensive for exporting of small HD projects.
If i have a Blu-ray burner,
can i burn BD exports onto DVD-r's (4.7Gb)
and play them in a set top Blu-ray player?
aka: Does a DVD-r accept a 'blue laser'?
(Menus at this point are not necessary)
Mostly i am wanting to burn 3-4 minute music videos onto DVD-r discs
in full HD Blu-ray without having to use an expensive Blu-ray disc each time.
thanks
j

hello,
at this time the answer is yes
they are called BD5 and BD9 discs
the BD5 is a single layer DVD-r disc that holds BDMV
the BD9 is a dual layer DVD-r disc that holds BDMV
now i'm trying to see if Encore CS5 burns BD5/BD9 discs?
thanks,
j

Similar Messages

How do I install Adobe Reader onto a computer with no internet?

I have a computer running Windows 8 with no internet connection. Is there a way to install Adobe Reader onto the machine with either CD or a USB drive?
Also, would there be a simple way to keep Adobe Reader updated offline?

Download the FULL installer here: http://get.adobe.com/reader/enterprise/
Put it on a flash drive and install it from there.
Bookmark that link for future reference

Replace dvd reader with blu ray in my brand new hp envy 17 leap motion se

Hello everyone . For a month now I have this nice hp laptop which I installed an SSD .
The only thing I do not like is the flexible keyboard but calling hp , they told me that it's okay for them and they can not do anything. I find it outrageous for a computer that cost me 1200 euro .
Anyway I wanted to change the internal dvd player with a blue ray player. I link my laptop :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04010241&cc=it&dlc=it&lc=it&jumpid=reg_r1002_it...
Can you tell me how should I do to replace it? Which player should I buy? I don't need to burn the blu ray but only read them well
I write from Italy and I would serve you indicate to me that the precise pattern making examples that refer to stores like amazon or ebay, at least I understand better . Obviously, the Italian version then Amazon.it or ebay.it
Then less important , I wanted to replace the two sticks of 4 gb ram with 2 of 8 to get to 16 gb. I checked and the model is a micron technology DDR3L . On the Internet I could not find the exact same model in version 8 gb then ask you which model is compatible with my laptop and if you could kindly always link me the article on amazon.it or ebay.it
thank you very much

Here's the jest I am going on the basis that your OD is a Sata interface and you will have to look for a Bluray Writer OD that is for Sata laptop drive not a Desktop drive. I give some examples but this is from the US sides and you can use it for references...this comes from eBay...
Here's a link of my search
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=Sata+Bluray+burner&_sop=15
Make sure you save your faceplate and swap it out with the one that came with the drive unless it doesn't have one but change the face plate to yours so it fits. You just have to make sure all the parts attached the original drive is put the same onto the replacement drive then you should be back in business. The Bluray burners from what I can tell are more expensive and the Panasonic Uj240 is a burner should you need one but there could be others but Panasonic Uj240 seems to one I find that I can tell are burners from the specs.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Want to replace DVD drive with second HDD on Probook 6570b regarding to setting BIOS

After replace CD/DVD Drive with HDD in matching Bay I got a problem with BIOS. After starting I got a message "there is no a Bootmanager" and CTRL+ALT+DEL. Then is only posible F9 and Boot Option to use manualy Hard Drive. Please tell me what I have to do to solve this problem.
This question was solved.
View Solution.

Berislav wrote:
After replace CD/DVD Drive with HDD in matching Bay I got a problem with BIOS. After starting I got a message "there is no a Bootmanager" and CTRL+ALT+DEL. Then is only posible F9 and Boot Option to use manualy Hard Drive. Please tell me what I have to do to solve this problem.
Hi,
Check the boot priority in the BIOS. Make sure that DVD is not the first boot option. It looks like when you swapped the DVD for the hard drive it won't skip boot from DVD to the primary hard drive and stays on the DVD option but the DVD ROM is not there anymore and it finds the new hard drive. However, the operating system is on the primary hard drive which is a different boot option. It finds the new hard drive but because the OS is not there it says no bootloader because the bootloader is on a different hard drive.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

How do I save aperture slideshow onto dvd

I have just created my first slideshow on aperture and now want to burn it to dvd. Can't find how to do this.

Click the Export button at the top of the slide show frame and select the location. Then go to that location in the finder, click on the item then click file burn.

How to import full res photo onto iphone

Hey guys, this may sound silly but how do I import photos taken from my dslr onto my iphone 5 at full res? Right now they're blurry when I zoom i

You're right. The images I uploaded from iPhoto were originally, approximately, 1 Mb each. When they were uploaded to the web, via iWeb publishing, they are all 60Kb - a significant drop in file size.
To answer your query, specifically, if you want friends/family to have access to high res images, then photocast an album with the pictures you want to share.
Rachel.

Need help with setting up lightscribe to burn onto dvd label with external

Bought the LG external mac compatible drive and have the smile on my mac disc label (bought) - have set the 'CD Boundary for text formatting' to LightScribe Full Label and there is supposed to be a lightscribe pop-up popping up when i press print but no pop up.
Could the lightscribe that i downloaded from their site not be installed even though it said 'successfully installed?'
anyone know what i am talking about? and could help?
thx
debcoo

Lightscribe is not an Apple product, so you might get better answers on the Lightscribe forums:
http://www.lightscribe.com/discussionBoards/index.aspx?g=posts&t=4296

How do you download snow leopard onto a mac with lion

i just recently purchased a mac pro 13.3 inches and it came with lion, but lion doesnt run power pc apps so i went and bought snow leopard because i was addvised by and apple support member that i could install it onto a partition and choose to run it. days later i get the disk and call in but this oither member says i cant. can anyone here tell me how i can do this because i know you can but the apple guys just tell me that its not addvised and send me here. thank you

Although you have accepted the negative answer as solving your problem, there is a positive one:
Install Snow Leopard into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

How to make a 2 hour long dvd? With highest quality? PE12

I made a two hour long event which I plan on burning into a dvd with the highest quality. It's avchd files. I want to burn it in h.264 1920x1080i pal dolby. I then tried to export the file onto my computer but it showed the file size to be 36,000 which is about 35 gb. I need to know if I export it directly to a dvd, will the size be smaller or the same. If it will be a large 35 gb then I guess I'll need a bigger dvd gb size which all I can find is blu-ray single layers, but I only find 25gb, also do this recordable disks be allowed to play in any dvd player or just blu-ray? Any good cites to buy them cheap? Here are the pictures, first one is where it shows I want to export it to my computer, and the second is to dvd, (DVD is not put in.)
file://localhost/Users/Dayana/Desktop/Screen%20Shot%202013-12-10%20at%2010.49.09%20PM.png
file://localhost/Users/Dayana/Desktop/Screen%20Shot%202013-12-10%20at%2010.45.45%20PM.png
Please help and don't be rude if my question is "dumb." I'm new to this.

Dayana
Please excuse if I go over some things that you aleady know, but again I do not want to take anything for granted that would prevent us from moving forward on your project.
When you wrote
When I go to Blu-Ray on the Status it says No Burners detected, and with AVCHD it says Busy.
1. Does your burn dialog have a field named burner location:? If so, does your Blu-ray burner show up as a choice in its drop down list?
2. And, with that "...with AVCHD it says Busy", have you selected Publish+Share/Disc/AVCHD disc and inserted a Blu-ray disc instead of a DVD disc, when you get the Busy message? The choice of Blu-ray is a Blu-ray disc; the choice for AVCHD is only a DVD disc. So, please clarify that point.
3. Have you tried Publish+Share/Disc/AVCHD disc with a DVD double layer single sided disc?
4. As a note..the maximum bitrate for burn to DVD-VIDEO on DVD disc 4.7 GB/120 minutes and 8.5 GB/240 minutes is the same, that is 8.00 Mbps. Whereas, the maximum bitrate is much higher for the AVCHD burn to DVD disc and the Blu-ray burn to Blu-ray disc (about 15.74 to 15.50 Mbps for AVCHD DVD, and about 20.19 to 24.0 Mbps for Blu-ray disc format on Blu-ray disc. More details on the exact values if needed.
What is the bitrate of the AVCHD file that you have imported to the Timeline? See if you agree...if the source has a higher bitrate than the export bitrate, would not you expect smaller file size for the export? And if the source has a lower bitrate than the export bitrate, would not you expect a larger file size for export?
Do some mini tests runs to prove or disprove that. Look at the Space Required and Bitrate reading in the burn dialog when you have a given disc in the burner tray.
Please review.
Thanks.
ATR
Add On...
Do you have the equipment that will play back AVCHD DVD as well as Blu-ray disc format on Blu-ray disc?

How i can download video clips from one site with Mozilla ?

I want to download video clips from this site [http://www.sexodirecta.com sexo] , but i don't know how to do that.
Are some plugins free availble for mozilla 3.6 that can do that ?

The only voice over files I've come across had the audio file separate from the photo. Control-click on the thumbnail of the photo with the audio and select Show File from the Contextual Menu. You'll be taken to that file's folder via the Finder. See if there's an second file associated with the photo or what the extension of the file is.
You may have to open the file with Quicktime Player Pro or iMovie and strip the audio from the file. Let us know what you find.
OT

How do I create a carving onto a tree with photoshop?

I am looking for a way to make a realistic looking heart on a old oak tree using photoshop, any ideas? Any help will be appreciated.

Hello there!
Here is a quick rough tutorial as well:
1. I opened two photos in a Photoshop document. One photo of a tree trunk, and one of the inner wood.
2. Make sure that the wood photo is below the tree trunk photo as shown below.
3. With the type tool, Type your text. I chose to make it black, so its easily selectable later on in the tutorial.
4. In the layers panel, merge the type layer with the trunk photo beneath it.
5. Below the layer is merged.
6. I am now going to select the black type with the wand tool.
7. With the type selected, you take the eraser and can erase within the selection.
8. After you erase within the entire selection, go to Layer > New Adjustment Layer > Brightness/Contrast
9. With a Brightness/ Contrast mask on the selection, Adjust as needed.
10. I also changed the layer Mode to Darken.
11. Below is my final (rough) product.
After this, I would most likely darken the edges of the type, and possibly bevel the edges. The rest is all up to you past this point in how realistic/ you need. With a simple heart, I can image that just a mask with some darkening on the edges would suffice.
Please let us know if you have any more questions,
janelle

HT1351 How do you manually sync songs onto iPod/iPhone with the recent iTunes? This article is invalid as there is no section on the left hand side of iTunes called 'Devices'.

Very frustraiting as I cannot currently put songs onto my iPod/iPhone after regrettably downloading the most recent iTunes, and my friends are having the same problem. I have an apple mac and it is clearly a fault of the new iTunes as it used to work before the new iTunes.

It's is Sooooooooo RETARTED!!! WHY CAN'T I MANUALLY ADD PLAYLISTS TO MY IPHONE??? AFTER I PURCHASE MUSIC IN ITUNES I THEN USUALLY CREATE A PLAYLIST (In Itunes 10.7) BECAUSE I FORGET THE ARTISTS!! AFTER I CREATE MY PLAYLIST I WOULD MANUALLY DRAG THAT PLAYLIST TO MY EXISTING IPHONE ICON AND VOILA! NOW I CAN'T EVEN DO THAT!! I HAVE TO WRITE DOWN THE ARTSISTS NAMES AND ENTER THEM INTO THE SEARCH BAR AND ADD THE SONGS MANUALLY TO MY IPHONE ICON!!!! ITUNES 11 JUST PUTS ME IN A REALLY BAD MOOD! I'm soo mad and upset. First world problems yo...

How to I scan a paper onto my computer with MG 3222, using a Mac OS?

I am having trouble figuring out how to scan then upload a paper using my MG 3222 scanner printer combo. I looked for a program on my computer but the only things I found were the system configuration programs for my printer.

Hi amfarrell77,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning. To scan using the IJ Scan Utlity, please follow these steps:
1. Place the documents on the platen glass of the printer.
2. Start IJ Scan Utility by going to the Go menu of Finder, selecting Applications, then double-clicking the Canon Utilities folder, IJ Scan Utility folder, then Canon IJ Scan Utility icon to start IJ Scan Utility.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window, then set the item size, resolution, etc. as required.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
    a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
    b.) In the DATA FORMAT field, use the drop-down arrow to select the option that is relevant to the type of document you want to scan.
    c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned images and documents are saved in the previously selected folder location specified in the SETTINGS... window.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Does anyone know how to make my old blackberry curve 8900 work with my new sim card that has been set up on my 9360?

i hate my new blackberry 9360 it never gave me a days hassle and i want to use it for the remainder of my contract as the 9360 is just a pain and full of problems and no matter what i do i cannot get an alternative phone despite the fact that i am a high spender with loyalty of over 10 years to my supplier. i do not want to use a fixed second hand phone. the reason we get a new phone is emphasis on new.
Solved!
Go to Solution.

back to using a proper phone - please make some more blackberrys like the old 8900 as it is a sturdy, reliable phone.
so my paid for brand new but got second hand repaired 9360 will sit in a box for two years.

PE7 Loops forever generating DVD Menu with Blue Notes template

I have observed that PE7 will loop forever while generating the DVD Menu (when the target is either a DVD or a directory). This will always happen when using the Blue Notes template if there are more than one main menu markers in the video to be produced. It does not happen if there are one or no main menu markers. It also does not happen with other menu templates. I've confirmed this problem on multiple computers even after a fresh install of PE7.
It starts to loop after all the media has been processes right at the beginning of the write to the DVD or directory.
Where can I get a Blue Notes template that works properly?

I don't think a screen capture will help. The problem happens with any test file that has two main menu markers on it. This causes the blue notes template to duplicate the main menu with one marker on each. If it makes a difference, I'm using a 16:9 aspect ratio for the video project.
My Blue Notes _mm template is dated 9/16/08 and is 3,855,333 bytes (same as your 3.765 KB in the explorer view). This happens with or without any scene menu(s) present. My guess is a bug in the Blue Note main template.

How to burn full hd clips onto dvd-r with Blu-ray burner to playback on a set top Blu-ray player?

Similar Messages

Maybe you are looking for