How to burn .MOD files from my thumb drive to a DVD

How can I copy my .MOD video files that are on my thumb drive to a DVD-R?

I'm not familiar with that file format, but apparently it is used for some audio and some video files. Here's an article that might be of interest:
http://www.masternewmedia.org/news/2008/06/12/howto_convert_modvideo.htm
Your basic challenge is to convert the format into Quicktime DV Stream (.dv) for greatest compatibility with iDVD. You can also check with Apple to see if upgrading to iDVD08 would solve the problem by being able to handle the format conversion internally. Be sure they understand how the .mod files were created.
John

Similar Messages

I have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk?

i have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk through disk utilities without erasing data (but will it delete my programs such as photoshop, office, creative suite?

Connect the computer to another Mac and put it in FireWire Target Disk mode, or use the Disk Utility to clone the drive or image specific folders with the USB drive as the target. After you've copied off everything you want, you'll likely need to erase the drive and reinstall the applications.
(69695)

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How do i transfer files from my hard drive to an external hard drive as FAT files? Laptop hard dive is full and I need to clear space.

How do i transfer files from my hard drive to an external hard drive as FAT files? Laptop hard dive is full and I need to clear space.

In Disk Utility use MS-DOS
Try http://www.mactip.net/guide-how-to-format-an-external-drive-to-work-seamlessly-w ith-macs-and-pcs-without-third-party-software/ for additional directions.
Allan

How do I transfer files from a flash drive to iMac. I get a folder with "no name" which I can live with but I can't find any way to make the actual physical transfer of the files to the iMac.

How do I transfer files from a flash drive to my new iMac? I get a folder with "no name" that I can live with but I can't find a way to transfer the flass drive files to to iMac hard drive.

What happens when you try to drag & drop the files?
~Lyssa

How do I open files from an external drive? It's plugged into the second slot to the end.

How do I open files from an external drive? It's plugged into the second slot to the end. Did I plug it into the right place and how do I find the drive when trying to attach a file in an email?

Files on an external hard drive open just like files on the internal drive - but I get the idea that you are having a problem just finding and seeing those files. Is that correct?
What operating system is running on your MacBook?

Hi there, my iMac has automatically been deleting files from my thumb drive when I try to open them. The lost files aren'tin the trash or anywhere else I can think of. Any ideas?

Hi there, my iMac has automatically been deleting files from my thumb drive when I try to open them. The lost files aren'tin the trash or anywhere else I can think of. Any ideas?

If one drive works and the other doesn't that points the finger at the errant drive. They are cheap, replace it. To check formatting right click it in Finder and choose Get Info and look for Format type. Finally do you eject it when removing it or do you just pull it out of the USB connection?

How do I transfer files from an external drive to my IPad air

How do I transfer files from an external drive to my new IPad air with wifi?

Does your hard drive have an app? there needs to be some soft of app to facilitate the data transfer.

How to use .mod files from a JVC camcorder?

Hi All,
I'm trying to find the proper workflow for using .mod files from a JVC Everio model camcorder. I was able to transfer the files onto my system by simply using the included usb cable from the unit. It simply mounted the camera's flash card on my desktop and I was able to drag all of the files from it.
As others have posted, the .mod files are not accessible using the Import function in FCP. I am able to open them with MPEGStreamClip as other have suggested. My question is, how should the files be converted to use with FCP and/or DVDSP? In MPEGStreamclip the file shows the video stream as: 224 MPEG-2, 720 × 480, 16:9, 29.97 fps, 8.40 Mbps, upper field first. I tried a few of the demux functions. The straight demux to .m2v & .ac3 yields a file that opens in QT, but it shows up as a 640x480 file and is noticably squeezed. Using the demux unscaled yields a file that opens in QT as a 720x480 file and looks somewhat better. And using the demux to headed yields as file that opens in QT as 720x404 and presumably is the correct 16:9 ratio.
Trying to use those same files in DVDSP didn't get me very far. If I create a new HD project in DVDSP I can import the straight demuxed file and the headed file. The unscaled file won't import. If I add the imported files to tracks the straight demuxed one will play in the simulator but the headed one simply shows a green screen.
I'm hoping that since MPEGStreamclip can play the files, its just a question of figuring out the proper export/conversion settings. My end goal is to produce a dvd of the footage (not exactly sure if I should be using an HD project or a SD project set to letterbox). I also need to produce a web-ready version of the footage. I haven't tried this yet but I'm assuming that one of the QT exports from MPEGStreamclip will get this done correctly.
Hopefully someone has a workable solution for these files.
Thanks,
Chris

Hi all,
I looked further on this forum and found others that had the same problem. One suggested connecting the cam corder first, then start iMovie, then wait for a few minutes. I did this and it worked!!!!!
Problem solved.
Thanks.

[SOLVED] How to Restore Folders/Files from a Hard Drive

I broke my system today; it won't boot into any run level. Rather than try to fix it, I'd like to just pull off the 4 or 5 MB of files that are on the hard drive. The partition they are in was formatted XFS. I have the 2008.06 ArchLive CD - is it possible to access files from the hard drive after booting with an ArchLive CD? If so, I could just scp them to an external server. Any help is greatly appreciated. Thanks.
Last edited by tony5429 (2008-09-28 04:52:39)

You should be able to mount the partition once you've loaded up the live CD. Just figure out which one it is by using
fdisk -l
then mount it to /mnt or wherever you want it.
As for moving/saving them, I'm not entirely sure how to get them onto an external server. You might have to mount another partition in order to install any apps that you need to connect to an external server, but wait for someone who really knows to answer before you try it. If you're only talking about 4 or 5 MB, I would just mount a USB stick and dump them on there.
Last edited by Xyne (2008-09-28 03:38:02)

How do I transfer files from a flash drive to my iPad? Do I need an adapter?

How do I transfer data from a flash drive to my iPad 2? Do I have to have an adapter or special device to do this?

You can use the camera connection kit to plug in a flash drive. But there are a lot of 'buts'.
First, most flash drives will trigger a 'device requires too much power' warning and will not work. (I had a 50/50 success rate)
Second, the iPad will only import properly named photo and video files. You cannot transfer music or documents.
Third, there is zero support for the export of files.
You can look into wireless flash drives. The Kingston WiDrive is just one example. They generate a localized wifi hotspot that you can connect your iPad to and then use an app to transfer files.

How to add music files from other hard drives

how to add music files from other external hard drives??

Not sure what you are trying to achieve.. You can copy the files to anywhere you like.. but the TC is a backup target for Time Machine.. it is not a media server.. it is totally useless copying your files to the TC as they will not be backed up from there.. TC has no built in backup and TM cannot backup network drives.

How do I download photos from a thumb drive to iphoto on my MacBook Pro?

Hoe do I download photos from a thumb drive to iphoto on my MacBook Pro?

Your profile shows you have a MacBook Pro running OS 10.3.x. A MBP can't operate on OS 10.3. So, what model Mac do you have and what OS is it running?
 Cheers, Tom

How to retreive Thunderbird files from a hard drive backup due to having hard drive replaced.

My hard drive crashed but I was able to backup to external drive the day before. Dell replaced the hard drive and I did a restore from back up but I can't find the Thunderbird profile files from the back up to put into my new Thunderbird on the new hard drive. Where can I find them on the backup and how can I import them to the new application of Thunderbird?

See https://support.mozilla.org/en-US/kb/profiles-tb to locate your profile on the old hard drive.
Then locate your profile on the new drive.
Copy the xxxxxxxx.default from your old drive to the same folder that your new one is in; so now you have <old 8-char>.default and <new 8-char>.default in the same folder.
See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch from the new one to the old one.

How to delete a file from my hard drive through iTunes?

I want to delete a file through my iTunes. Whenever I do, it just gives me a dialog window telling me that it will delete the file from the library and my iPod. It does NOT delete it from my hard drive. I do NOT want to let iTunes manage my music.
How can I delete files? It seems crazy that I wouldn't be able to.

hmm. for some strange reason after doing that it just simply warns me that in deleting the song(s) it will ruin my playlists/mess up songs currently on my ipod.
im just trying to delete all the songs that are under a minute from various albums because they take a lot of room, yet are pretty useless. but they are strung out over multiple files and i simply would love to be able to delete them all from the library where they are arranged. do you know of any other techniques to fix it?

How to burn .MOD files from my thumb drive to a DVD

Similar Messages

Maybe you are looking for