How to burn pre-loaded OS

Hi All!
I just wanted to ask, how can i burn or create a bootable DVD from the pre-loaded OS which is WIN 7 Home Premium x64. I dont have Windows automated installed kit (waik) and tis time consuming to download it for it is 1.37GB of size..any help will be much..Thanks

Pre-loaded OS is from the Recovery Disk. Instead of burning it directly, why don't you do a "Product Recovery Media" since burning those would also contain your OS and your factory initial condition.

Similar Messages

How to delete pre-loaded apple apps?

how to delete pre-loaded apple apps?

Abi99 wrote:
The cable is OK, otherwise you would have not see your RM-xxx at all. Please, patch again and use the Nokia 6700 classic as recommended.
@Abi99 WOW! It worked like a charm.
It didn't work when I patched MobiMB by replacing my mobile code RM-949 before 6700 ( see attachment, hexeditor.png, navigation point - 1 ), now I placed my mobile code RM-940 after 6700 ( see attachment, hexeditor.png, navigation point - 2 ). Annnnnnnnnnnnd! BOOOM! This is what I got! (see attachment, mobimb3.png)
Thank you sooooooooooo much @Abi99 . It was my mistake, I didn't follow your tutorial properly. First, I hesitated to install hex editor on my PC, when my AV detected it as adware. But I trust you, I disabled my AV and gone ahead and enabled my AV. It worked just fine.
BTW, is there any list of items, which are safe to delete?
Attachments:
hexeditor.png ‏77 KB
mobimb3.png ‏12 KB

Gifting an IPad, How can I pre-load Pictures?

Hi all... Like the topic says, I'm gifting an IPad for Christmas, and I would like to load some pictures of good times and family onto it prior to giving it to them.
I pre-ordered mine when they first came out, and cannot remember if you HAVE to use ITunes to "activate" it like the IPhone... If this is the case, then how can I go about getting it activated, and syncing photos onto it? They have an IPhone, so they already have an ITunes account... Or is it even possible?
Thanks for any help/suggestions....

Thank you Ralph.
Will it cause any issues for them, when they go to sync it to their machines, being that I activated it with my account?
I'm pretty sure they can just back it up, and or just copy the pictures(that I sync'ed) from the IPad, so that they can keep those pictures as well as load their own... I'm just unsure if there will be any issues when activating it with my account...
Thanks again

How to uninstall pre loaded Office Trail

New to the world of a Mac and got myself a lil baby Mini. Although I got a 80gig drive I only have about 10gig left as I do quite a bit of vid editing.
How can I uninstall the Office trial software?
I know this was a big file on my PC and am sure it will free up some space.
Please make it idiot proof if you reply so I don't screw something up.
Thanks!

Hi THX,
Well, I'm not 100% positive if there is, but check the Microsoft Office application folder and see if there is an uninstaller, if so, just use it. Alternatively, type 'Microsoft Office' into the search bar in a finder window and trash all the files that appear. That's all you need to do.
Disc space is critical to keeping your machine healthy and having a long life and 10GB is the recommended minimum amount of free disc space. I like to keep around 50% free space. I have two external hard drives. Does your mini have a Super Drive? If so, I would suggest burning a lot of your video footage to DVD as data to free up your hard disc, unfortunately you can only do this with files that are under 4.5 gigs. If you can't do that then I would suggest you buy a Firewire external hard drive asap or you may be posting back with something like, "My hard drive crashed. How can I get all my movies back?" - Food for thought.

How can I pre-load the Flash on my page?

I added Flash navigation to my HTML site. Whenever I click on
a link, the Flash has to reload on every new page, so it takes a
second longer to appear. Otherwise it works ok... this is just kind
of annoying. Is there any way around this?

load the HTML into an iframe.

How to disable pre-loading of PDF documents ?

Since the new Adobe Reader X, whenever the cursor in Windows explorer happens to be on a PDF file, Adobe Reader automatically launches two instances of its executable into the system memory, using CPU and RAM resources regardless if the user actually intends to open that PDF document or not.
I find this behaviour undesirable and unacceptable, and I'm baffled that such a radical change would be implemented in a program without giving the user a menu option to disable it.
Since there is no menu option, could someone please tell me how can I otherwise stop this from happening ?
Thank you.

Roy,
Role and Workset Hierarchy:
Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
Hope this time it helps you.
Thanks
Mona

How can I choose ringtones instead of pre-loaded sounds for alarms

I have a bunch of questions. First, how can I choose ringtones (my last phone had a category called "tones") and other purchased sounds instead of the pre-loaded sounds for my alarms, text message alerts, etc.? Thanks.

Apple no longer sells ringtones... Besides you never needed to buy them because they're easy to make! All you need is DRM free music (burned from cd, iTunes +). Read this link for instructions:
http://www.ehow.com/how2160460custom-iphone-ringtones-free.html

How syncronize with the data base after pre-loading the data

Hi,
I have pre-loaded the data from the database table into the cache.
If the key is not found in the cache i want to it to connect to database and get the value from the table. How to achieve this?

Hi JK,
I have pasted my cache loader code, config file and the main class in the other post but i m not sure what is the issue with it. Its not working. Please can you tell me what might be the issue with that piece of code. I m not getting any exception either but the load() or loadAll() method is not at all getting triggered on invoking cache.get() or cache.getAll() method. What might be the cause for this issue?
Can you give me the coherence-cache-config.xml contents?
I m not sure whether its the issue with the config file because i have read some where that refreshaheadfactor is required to trigger the loadAll() method.
Edited by: 943300 on Jul 4, 2012 9:57 AM

My Samsung tv came pre-loaded with V-Tunes. I prefer in Tune-In Radio. How can I get it on there?

My samsung tv came pre-loaded with V-Tunes. I prefer Tune-IN Radio which was pre-installed on my other samsung tv which was recently replaced with larger unit without realizing that Tune-In wasn't installed on this new one..... How do I get it installed. It ia not appearing in the Samsung Apps on my screen. Frustrated!!!!!

Go to the page linked below, and there's an option to "check your device". If you click this, you can enter the make and model etc. of your new TV and find out for certain if it is compatible or not.
http://www.samsung.com/us/appstore/app.do?appId=G00004990795#

How to create a Pre-Loader

Hi,
I've watched several tutorials, and read several webpages on
how to create a pre-loader flash page, but I can't seem to figure
out how.
I like the one here:
http://jonhmchan.com (Yes,
JonHMChan)
Thanks so much!
(P.S. Using Adobe Flash CS4)

Hi KGlad,
I'm having exactly the same problem, so I downloaded your preloader.fla file, but unsure where to proceed with it now. The preloader which I normally use is an extension manager file which I access by dragging onto the stage and then via the components inspector I can add the swf file which needs to be pre-loaded. Unfortunately it is an asc2 file so from the above I gather it will not work with the swf file created and exported from InDesign.
Without a preloader, it works fine (as can be seen from the low resolution test file below)
http://www.carolsteele.co.uk/testing/test_01.html
The above links to a lower resolution version for testing purposes only - but I need a preloader as there is a distinct time lag before the swf file is loaded if I use the full version with a higher resolution image setting. If I use my normal preloader, it loads correctly, but the swf just simply runs through at high speed without stopping as can be seen in the link below.
http://www.carolsteele.co.uk/testing/test_02.html
How do I modify your fla file so as to load the swf file please.
Thanks in advance
Carol

How use a custom Pre-Loader

Hi, quick question
How can we modifies the default Pre-Loader of our APP ?
Regards,
Core

Hi Core,
the link below from ted is a good one for custom preloads
http://www.onflex.org/ted/2006/07/flex-2-custom-preloaders.php
check this out,
Arthur

How do you uninstall pre-loaded software?

I am looking to free up some space on my hard drive, and I would like to get rid of the some of the unnecessary preloaded applications. I know that this can be done on windows but can it be done on macs, and if so how?

I agree with Eric in that if you haven't had your MacBook very long and can backup you data well it's probably best to reinstall using a "Custom Install" and pick and choose what you want on there.
AppZapper is.....mmm okay. I got it when MacZot had a deal and got it for 65 cents or I wouldn't have gotten it (Spotlight is just as good). Problem with most if not all of the pre-loaded application are they're package installed. AppZapper IMHO has limited success uninstalling them.
I used to use DesInstaller to rid myself of .pkg installs. I'm not sure if there's a Universal of it or not. I now use OSXPM which manages .pkg files (creates them too!) and while it's a beta it works well and it's free (so far).

How to Pre-load after onRelease

Hi there. I want to be able to pre-load a movie clip or audio
clip after a onRelease function. Right now I have audio playing
onRelease. How do I script things to get the audio to preload from
a Loader movie clip or script? Thanks for your input.
Luke

this should do it:
var snd:Sound = new Sound()
snd.onLoad = function(){
var pct:Number =
Math.round(snd.getBytesLoaded()/snd.getBytesTotal()*100);
wait = setInterval(loadingSnd, 100)
function loadingSnd(){
if(pct >= 100){
snd.start();
clearInterval(wait);
btn1.onRelease = function(){
snd.loadSound("audio/loop1.mp3", false);

How to pre-load Coherence Caches used within an OEP Application

Hi OEP/Coherence guys,
I'm currently developing an OEP application that was consuming database inputs in CQL queries.
I've replaced database direct access by Coherence caches access. My Coherence Local caches use a cache loader to fetch rows (by key) when there is a cache miss. This is working well, and the caches get filled in during the execution of my OEP application.
The problem is that if CQL queries are made on some attributes (not the key) of not-yet-cached data, the load method of my cache loader is not invoked and there is no result to my CQL query.
I'm wondering how to pre-load my data in Coherence Caches, from the database, when the OEP application starts to avoid such kind of problems...
Thx for any advice.
Renato

Hi.
Could you please describe the way to "set-up a cache-loader to load data into your cache when the OEP application starts" ?
I have a cache-loader configured with my cache. My cache-loader implements the "com.tangosol.net.cache.CacheLoader" interface.
This interface only defines 2 methods:
load(java.lang.Object oKey) ==> Return the value associated with the specified key, or null if the key does not have an associated value in the underlying store.
loadAll(java.util.Collection colKeys) ==> Return the values associated with each the specified keys in the passed collection.
None of these methods allows me to pre-load my data (and BTW it looks like "loadAll" is never called by OEP)
Thx
RP

How uninstall Pre loaded games in my ASHA 308

How uninstall Pre loaded games in my ASHA 308

If you go to the games folder or app folder you can do so there,if the games cant be removed they are part of the software and cant be deleted.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to burn pre-loaded OS

Similar Messages

Maybe you are looking for