How to bypass/simulate RoleOwner Approvel?

Hi,
I have a WF(workflow) where in am displaying a form to select a role(s) and fetch the role owners, sends role assignment for approval.
Once RoleOwner approves, then i am doing user view checkin.
Now the problem is, checkin operation internally triggering another WF called "update user" by Configurator and going through the approval process again. I do not want this workflow to be triggered as i have already gone through the approval process in my WF.
Can someone throw light on how to do this please.
Thanks,
Krish

If you are in R12, you don't need to customize the workflow for the mentioned requirements. You can setup tolerances and routings in PO superuser to fulfil the requirements.

Similar Messages

  • How to bypass from OAM authentication for certain domain

    Hi All,
    We are trying to unprotect certain domain from OAM domain but coudn't. Please help us fix this issue.
    Environement details:
    We have two nodes, one node for OAM_OSSO and another one for OSSO_Portal application.
    OAM server details:
    In this server, oracle application server single sign on(services are HTTP, OC4J, and OID) and OAM. Integrated OAM_OSSO using [ID 979827.1]
    Portal server details:
    In this server, oracle application server single sign on(services are HTTP, OC4J, and OID) and portal weblogic server(portal application) is running. portal weblogic is registered with thier own portal OSSO.
    In OAM, We protected following portal url's
    /sso/auth      
    /pls/orasso/orasso.wwsso_app_admin.ls_login
    portal _OAM integration is working fine.
    Now portal team come with new requirement for customer, application also running in their same portal weblogic server and that portal application domain is alreday registered with Portal OSSO and Portal OSSO page is protected by OAM. the requirement is bypass OAM authentication, and need to authentication against their own portal OSSO+OID.
    Please tell me how to bypass OAM authentication from this scenerio.
    -Sarath

    Hi MD,
    Thanks for your update.
    We are using oracle 10g. Please tell me how Anonymous scheme will help us to get out from this issue.
    Portal Weblogic server registered with portal IDM server and portal IDM server OSSO protected by IDM OAM. So if i tried any of the application which deployed under portal weblogic server will get protected by OAM right. Please correct me if iam wrong.
    In this scenerio we have two OSSO, one in OAM node and another one in portal server. Now portal team come up with new webserver domain for customer, in customer scenerio we want authenticate againt portal OSSO with their own OID rather than using OAM authentication. Here my concern is, customer or employee the portal weblogic server and portal OSSO are common for both user but only difference in webserver domain.
    So if i tried to access customer application, then customer webserver redirect to portal weblogic for open the requested page(note if webgate not in picture). portal weblogic server is register with portal OSSO and its redirect to portal OSSO for authentication but Portal OSSO server integrated with OAM using webgate.
    1. When tried to access customer application ,Portal OSSO server tried to show own sso login page for authentication but Portal OSSO server already integrated with OAM. so portal OSSO server requested to OAM to access portal sso login page not the request of customer page login.
    2. here,portal OSSO login page protected and OAM serve login page for OAM authentication against OAM OID. If i specify anonymous scheme for customer domain then how will work here, portal OSSO requested to OAM to access portal OSSO login page not the customer page or employee page...
    Here OAM authentication will come into picture for all scenario but need bypass for customer login.
    Requirement is when customer trying to access then authentication need to happen in portal OSSO not in OAM. Hope you understand the architecture.Please suggest how.
    -Sarath
    Edited by: 898990 on May 11, 2012 8:22 PM
    Edited by: 898990 on May 11, 2012 8:25 PM

  • I purchased an iPod touch 5 64gb mint condition, it was working good but now I reset it and it's asking for the Apple ID of the original owner. Does anyone know how to bypass this so it works for me?

    I purchased an iPod Touch 5 64gb mint condition, it was working great but I reset it and now it's asking me for an Apple Id. Problem is it want the original owners & not mine. I would have no problem contacting the person I bought it off of but I no longer have their information since when it worked I deleted the emails!
    Does anyone know how to bypass this problem so that I can have the ipod work for me and my Apple ID?
    I would even take it to Apple if they could fix it, would they? and what might that cost me?
    Any suggestions would be great!!!!

    Nope. Only the previous owner can do that. See:
    iCloud: Find My iPhone Activation Lock in iOS 7

  • How to Bypass Windows 7 Login Screen When Forgot Admin Password

    When forgot Windows 7 administrator login password and be stuck at the login screen what can you do? Believe that many people have encountered such a situation where they are locked out of their own computer for forgotten Windows administrator password. So today I would like to talk about several tricks on how to bypass Windows 7 login screen when forgot administrator login password. Trick 1: Reset Windows 7 admin password with password reset diskIf you have ever created a Windows password reset disk for that administrator account before you forgot its password it is easy to use it to reset or remove its password. Just insert the disk into your locked Windows 7 computer and click ¡°Reset Password¡± link on the login screen. Then follow the password reset wizard to perform password reset. This is the easiest way to bypass a Windows login screen when forgot administrator password. Trick 2: Change Windows 7 admin password in Safe ModeIf you have no password reset disk you have to look for other tricks to bypass your Windows 7 administrator password. So if you have enabled the built-in administrator account you can enter Safe Mode by pressing F8 when your computer is booting. And access that built-in administrator account to change other user password. Trick 3: Bypass Windows 7 Login screen with Windows Password RescuerIf the forward 2 tricks don't work, it is necessary for you to use an effective Windows Password Recovery tool like Daossoft Windows Password Rescuer. Steps are as below.Step 1: Download and install Daossoft Windows Password Rescuer into another accessible computer.Step 2: Launch this tool and follow its instruction to burn it to a USB/CD/DVD flash drive.Step 3: Boot your locked Windows 7 computer from the flash drive.Step 4: Follow its instruction to reset/remove your Windows administrator password. Detailed video tutorial :How to Remove or Bypass Windows 7 Administrator Password - Forgot Windows 7 Administrator Password

    The methods above don't work at all. Eventually I used a paid tool - PCUnlocker Live CD, and it successfully bypassed my lost admin password. 

  • Pop up window asks for password to access os x applications:  how to bypass necessary signing in?

    pop up window asks for password to access os x applications: how to bypass annoying signing in?

    Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
    http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
    Fellow user Grant Bennet-Alder offers this solution:
    Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
    When the Security Update is done, the old version of Mail is disabled.
    The solution has been to:
    1) make certain Mail is in the /Applications folder
    2) There is no other copy anywhere else.
    3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
    Security Update 2012-004 (Snow Leopard)
    If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
    Mac OS X 10.6.8 Update Combo v1.1

  • How to bypass a proxy server in pocket pc 2003

    Hi All,
    I am trying to run a mobile web dynpro application on pocket pc emulator. As a part of this I have installed the list of installables eVC4.exe, evc4sp3.exe, Microsoft Pocket PC 2003 SDK.msi and trying to deploy the mobile web dynpro application.
    Earlier I have tried the same on Blackberry, but I couldn't succeed. So I am trying it now on Pocket PC emulator. Now the issue which I am having is emulator is connecting to internet but not to server (The machine which has SAP Web Application Server).
    I do not have any clue to resolve this.
    I guess the problem might be to bypass the proxy in pocket pc emulator, as I done the bypassed the proxy when I deployed through desktop browser.
    Could anyone please let me know if anyone of you having any idea how to bypass the proxy thru emulator or how to resolve this issue.
    Emulator which I am using is Microsoft Pocket PC 2003.
    Regards,
    Kishore.

    Hi Kishore,
    Not sure whether it works but have a try..
    Start>Settings>Connections>Connections> Advanced tab>Select Networks>Exceptions>Add new URL> Give the URL--> OK.
    Regards,
    Lakshmi

  • Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found. Do you have any idea on how to bypass this authentication ??  Regards,  Gilson

    Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found.
    Do you have any idea on how to bypass this authentication ?? 
    Regards,
      Gilson

    Hi...
    After I have wait for 30 minutes without do anything, the wifi interface worked.
    I don't know if Apple could fix the issue on their site or the reboot of the Iphone solved the problem.
    I'm installing IOS 6 on the Iphone 4 of my wife. Let's see if the behaviour is the same.
    I will post the informations after finish the installation.
    Gilson

  • HT201210 how to bypass error 1600 during the restoring of my Ipod touch 4g

    how to bypass error 1600 during the restoring of my Ipod touch 4g

    Next try;
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • How do I simulate thermocouple in closed loop PID using plant simulator?

    Hi all
    am creating a PID application to control temperature which is measured by a thermocouple. how do i simulate the thermocouple in closed loop by changing the plant process parameters, the temperature is controlled by a infra red lamp.
    Regards
    Arun

    Hello Arun,
    Please refer to the second order system that I have attached. This VI uses the plant simulator to simulate a thermocuple in a temperature chamber.
    Regards,
    Arun V
    National InstrumentsMessage Edited by sunrays on 06-27-2005 06:21 PM
    Message Edited by sunrays on 06-27-2005 06:22 PM
    Attachments:
    Angelantoni.zip ‏31 KB

  • How to bypass material rounding rules when using 'BAPI_PO_CREATE1'?

    How to bypass rounding rules when create a PO using 'BAPI_PO_CREATE1'?
    I faced a problem when using the BAPI to create PO. As the material has rounding rule, thus, when I create the PO using this BAPI, the quantity will be rounded according to the rule.
    How can I bypass the rounding rule so that I can upload the quantity according to the quantity that specify in my upload file?
    Edited by: Irene Sam on Jun 17, 2008 1:08 PM

    I've solved the problem with passing the parameter no_rounding into the BAPI.
    poitem-no_rounding = 'X'.
    poitemx-no_rounding = 'X'.
          CALL FUNCTION 'BAPI_PO_CREATE1'
            EXPORTING
              poheader         = poheader
              poheaderx        = poheaderx
            IMPORTING
              exppurchaseorder = w_ebeln
            TABLES
              return           = poreturn
              poitem           = poitem
              poitemx          = poitemx
              poschedule       = poschedule
              poschedulex      = poschedulex
              potextheader     = pohdrtext
              poaccount        = poaccount
              poaccountx       = poaccountx.

  • Does anyone know how to bypass an iCloud activition...??

    Does anyone know how to bypass an iCloud activition...??

    If the iPhone has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
    http://support.apple.com/kb/PH2702
    If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you. Return the iPhone for a refund if you can.
    Regards.

  • How to bypass iOS 7.0.4 activation lock

    how to bypass ios 7.0.4  activation lock iphone 4?
    Any one can help?

    Max Ho wrote:
    how to bypass ios 7.0.4  activation lock iphone 4?
    Replace the logic board, although this will most likely cost as much as the phone, if you can find one.

  • HT3939 how to bypass a iphone without simcard?????

    how to bypass iphone 5s without a simcard pleas help????

    You cannot activate an iPhone without a sim. The sim does not have
    to be associated with an active wireless account; however, if the iPhone
    is locked to a wireless provider, the sim must be from that wireless provider.
    To activate the iPhone to use as an iPod, borrow a sim from a friend or
    go to your wireless provider and as for an inactive sim.

  • If cache go down, how to bypass Transparent Caching in CSM ?

    hi.
    I configured transparent caching in CSM.
    But cache go down, CSM dropped traffic to web server.
    In this case, deed more configuration?
    please me know how to bypass in cache go down .
    thanks.
    ============== CSM configuration ==================
    module ContentSwitchingModule 3
    vlan 10 client
    ip address 192.168.112.2 255.255.255.0
    route 172.29.0.0 255.255.0.0 gateway 192.168.112.1
    vlan 11 server
    ip address 192.168.112.2 255.255.255.0
    gateway 192.168.112.3
    route 172.18.1.10 255.255.255.255 gateway 192.168.112.4
    probe CACHE icmp
    interval 2
    retries 1
    failed 2
    receive 1
    serverfarm CACHE
    no nat server
    no nat client
    real 172.18.1.10
    inservice
    probe CACHE
    serverfarm FORWARD
    no nat server
    no nat client
    predictor forward
    policy NOCACHE
    client-group 10
    serverfarm FORWARD
    policy CACHE
    serverfarm CACHE
    vserver FROMCACHE
    virtual 0.0.0.0 0.0.0.0 any
    serverfarm FORWARD
    persistent rebalance
    inservice
    vserver REDIRECT
    virtual 0.0.0.0 0.0.0.0 tcp www
    vlan 10
    serverfarm CACHE
    persistent rebalance
    slb-policy NOCACHE
    slb-policy CACHE
    inservice
    access-list 10 permit 172.29.1.10

    under your vserver redirect, instead of configuring 'serverfarm cache' configure 'serverfarm cache backup forward'
    If the serverfarm cache goes down, the CSM will use the backup which is a forward.
    However, in this case, the response from the server will probably not come back to the CSM, so you should configure the vserver with the command 'unidirectional' as well.
    Regards,
    Gilles.

  • How Can I Simulate Double-Clicking A File To Open It In The Default App Without Installing Default App?

    I have an app written with Visual Studio 2013. The app has code for opening a file using the standard OpenFileDialog and also has code (AutoOpenFile()) for opening a file when a user double-clicks on a file that is handled by the app. I have not yet created
    an installer for the app, so I won't be able to test it's AutoOpenFile() code...unless there is a way to simulate the process of auto-opening the double-clicked file without actually installing the app on my PC. Anyone?

    Thanks for your reply, Wyck. I already have the necessary code in my app for opening a file when I double-click on it. The problem is that the app is not currently installed on my PC. Until I do install it, is there a way I can test-run that code
    by double-clicking on an associated file?
    You lost me at: you want to test-run code that is not on your PC.
    O_o
    You want to double-click a file, and then...what do you want to have happen?  You want to run...something...that is not on your PC??
    The "simulation" is to launch your app from the command line and pass in the name of the file you wanted to simulate a "double-click" of.
    Regardless, you cannot get the shell to have a double-click of a file cause your application to launch unless you modify the registry to do so.  (This is tantamount to "install" to me.)
    In the spirit of continuing to be helpful, though, I'll assume that this is what you want to do and I'll show you how to get it done with the least amount of tampering with your registry.
    Here are minimally invasive registry modifications you need to make to get it to launch a program when you double-click your file.  It's pretty small.
    EXAMPLE ONLY:
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\.wyck]
    @="Wyck.Document"
    [HKEY_CLASSES_ROOT\Wyck.Document\shell\open\command]
    @="c:\\windows\\system32\\notepad.exe \"%1\""
    [You have to save the above with your appropriate modifications to a file with the
    .reg extension (e.g.: test.reg) and then you'll have to double-click the test.reg file to "merge" these settings into your registry.]
    The example above registers a file extension called .wyck and assigns a completely arbitrary class name to it called
    Wyck.Document.
    Then it associates a shell open command with the Wyck.Document class that causes
    notepad.exe to be passed the filename of the file you double-clicked (that's what the
    %1 does).  You are welcome to replace all the specific names with your own extensions and class names and replace notepad.exe with the path to your (test) executable.
    This executable will be launched, but not with a debugger attached.  To facilitate debugging it, you'll want to temporarily add some code to your program to pause when the program launches, possibly by showing a message box right at the very beginning
    of your main function that says "attach debugger now" so that you can attach a debugger to the process that was started by the shell, and then dismiss the message box and continue debugging.
    When you are done with your testing, you can simply manually delete those two registry keys using
    regedit.

Maybe you are looking for

  • Problem in AP Invoice Posting

    Hi Gurus, We had a problem in invoice posting to the Vendor. Some invoices posted correctly and paid but few have corrections and those to be posted manually. Usually the Posting happens by Batchjob in Autosys stream. My questions are Can we delete t

  • SUDDENLY - IMAGES NOT SHOWING UP IN MAC MAIL

    Suddenly, just in the last few days, my Mac Mail isn't showing any images in the messages themselves in any of my accounts. What setting could be the cause? I have checked, "Display remote images in HTML messages", but that doesn't seem to help. Wher

  • Disappearing Folders

    I've updated my Macbook and iMac (latest model) to OS X 10.7 Lion and have "lost" the Library folder in my User account on the iMac but not on the Macbook. I used Tinker Tool to try to confirm that it exists - it does but I can't seem to make it "vis

  • Booting a cloned drive on a different Mac?

    For added safety, i made a bootable clone of my drive on a separate partition of my time machine drive. Thankfully it boots perfectly fine on my computer through the usb. I was just wondering though; if my macbook wasn't available and i wanted to acc

  • Blog integration in Muse

    I am happy to have my sites hosted at BC, but really hate the arduous task of back-end integration of a BC blog module that is also difficult to modify. Please can a blog option be added as a widget or some other way of direct integration into Muse?