How to caculate with holding tax using vendor number

Dear All,
I need to calculate and simulate the with holding tax amount before the FI document post. input should be the vendor number fisical year and the company code and the with hoding tax base abount. plz help me to do this
regard
nawa

Hello,
For a record in BBSEG you can have multiple records in the data file which corresponds to Structure BWITH which allows more than one value for field WT_WITHCD. For ex:
BBKPF
Field1      Field2
a     bb
x     yy
BBSEG
Field1      Field2     Field3
a     bb     ccc
x     yy     zzz
BWITH
Field1      Field2     Field3     WT_WITHCD
a     bb     ccc     WT_WITHCD1
a     bb     ccc     WT_WITHCD2
a     bb     ccc     WT_WITHCD3
x     yy     zzz     WT_WITHCD7
x     yy     zzz     WT_WITHCD8
x     yy     zzz     WT_WITHCD9
Hope this gives you some help to proceed further.
Best Regards, Murugesh AS

Similar Messages

How to calculate with holding tax for the open item

Dera all,
Can you tel me how to simulate with holding tax for the open item? i will try do it using FI_WT_F110_CALCULATE FM but it dosnt work. plz help me
regard
nawa

Hi Sushil,
can you please elaborate on how you resolved it. we are facing the same issue with BAPI not calculating the withholding tax data.
Thanks,
Sanket

Change with holding tax for vendor

Hi all,
I have a requirement of chnaging withholding tax for exisitng vendor. Is it possible to achive this using any function module or BAPI and ateast by BDC or LSMW ??
Best suggestions will be rewarded with points.
Sivaprasad

Hi Sivaprsad,
You can change the with holding tax data by using BDC. because, it having table control, so it's easy to update code in BDC.
Hope, it will help you.
Thanks,
Poonam.

How to apply with holding tax?

Hi guys,
While creating invoices, based on the supplier sites and withholding tax rate it will automatically apply the withholding tax on invoices while we validating it or paying the invoices.
But here we have an issue that what if the tax rates are changing for every 6 months? We need to modify withholding tax for supplier sites for every six months. But my client is not willing to modify tax rates for supplier sites for every 6months.
What my client expecting is he wants’ to select withholding tax type while creating PO. While we are creating invoice if we match this invoice with PO then he want to with hold tax the amount from paying.
Is this possible through personalization / customization or any suggestions?
We are expecting any suggestion that will help us to come over this issue.

Hello,
For a record in BBSEG you can have multiple records in the data file which corresponds to Structure BWITH which allows more than one value for field WT_WITHCD. For ex:
BBKPF
Field1      Field2
a     bb
x     yy
BBSEG
Field1      Field2     Field3
a     bb     ccc
x     yy     zzz
BWITH
Field1      Field2     Field3     WT_WITHCD
a     bb     ccc     WT_WITHCD1
a     bb     ccc     WT_WITHCD2
a     bb     ccc     WT_WITHCD3
x     yy     zzz     WT_WITHCD7
x     yy     zzz     WT_WITHCD8
x     yy     zzz     WT_WITHCD9
Hope this gives you some help to proceed further.
Best Regards, Murugesh AS

With holding tax decuction from T.Code F-02 with out sp. gl indicator

Hi All,
While making the payt to service vendor my client do not want to use the functionality of advance payt, which can be performed through T.code F-48. They wants to treat this advance payt as a normal payt to vendor but they want to deduct the with holding tax from this payt.
I have tries to use T.code F-02 with posting keys 25 Dr Vendor & 50 cr Bank. But when i am using this posting key for vendor (i.e.25) System gives me warning message saying with holding tax information is ignored & system do not deduct TDS from the payt made to vendor.
But when i am using PK 29 with sp gl indicator A for advances from T.Code F-02 system allows me to deduct the with holding tax against vendor paytment.
Please guide me how to duduct the with holding tax from vendor payt. without using sp. GL indicator for advances.
Thanks
Sonal

Hi
why ur clien not want advance paymeny through Special GL, what is the issue/purpose
see TDS deducted at the time of Advance payment and at the time of invoice
when u use F-02 for TDS deduct of vendor without using special GL and u useing 25 vendor and 50 bank
in this case tds not deducted here vendoir is debit but withouse advance indicator
becuase u given vendor advance , but in this case entry not showing advance or
in SAP Standard system TDS deducted of advance payment when u using 29 posting key for vendor this is stsndard key of advance vendor
so convience ur clien u use Advance payment method with Special GL, if they not agree then ask what is the purpose u not using Speacial GL through Advance paument
if any query, revert back
Regards
Roobal

With holding tax base amount for 1099 vendors with discounted payment term

Hi Friends,
We have a below situation for 1099 vendors,
Some of the 1099 vendors are set-up in the system with payment term with discounts i.e. 2% if paid within 10 days
As per config, system posts with holding tax base amount at the time of posting payment.
With holding tax rate is 0%,
Based on modified net amount calculation
and
Cash discount calculation before w/tax calculation
When we have vendor with input tax, system excludes tax amount at the time of payment but for the with holding tax base calculation amount system does not exclude input tax type.
Which causes difference in 1099 misc vendors
Below is the example of how system calculates the amount.
Invoice $ 1000, payment term 2% if paid within 10 days. Input tax 7.25%
Payment going out=
$1000- $ 72.5(tax 7.25%) = $ 927.5 18.55 [2% discount] = $ 908.95 (payment amount)
With holding base calculation =
$ 1000 100 (2% discount) = $ 900
Difference between payment going out and with holding tax base = 908.98 900 = 8.98
Can some one please tell me how to get rid off this difference?
Moreover, please tell me if its normal to have 1099 vendors with discounted payment term.
Any thoughts on above situation will be helpful
Edited by: Shefford William on Jan 28, 2008 11:36 PM

Dear All
i am also having the same problem. The example is
Net invoice Value   = $ 100,000
Input Tax @ 15%   = $ 15,000
Total Invoice Value = $ 115,000
Cash Discount = 20% with in 20 days
On payment the system behavior should be
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,325 ( 3.5% of 95,000 the Inv Value - Cash Discount that is $ 115,000 - $20,000)
Credit Bank Account = $ 91,675 ( Inv value - Cash Dic - W/H tax that is $ 115,000 - 20,000 - 3325 = 91,675)
However at the time of payment system is calculating tax as follows
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,220 ( 3.5% of 92,000 the Inv Value - Cash Discount that is $ 115,000 - $23,000. This $ 23,000 is only calculated for W/H tax calculation that is 20% of $ 115,000 )
Credit Bank Account = $ 91,780 ( Inv value - Cash Dis - W/H tax that is $ 115,000 - 20,000 - 3220 = 91,780)
this is not the common practice when using the net base value in the system.
Can any one help me in this regard. I really have been stucked in this problem for many days
Regards
Bilal Athar

Populating with holding tax part in WITH_ITEM using RFBIBL00

Hi all,
While handling with hold tax part during FB01 UPLOAD using RFBIBL00- DIRECT INPUT METHOD,i assigned WITHT, WT_WITHCD AND WT_QSSHB values to BWITH,and the tax part gets calculated and updating bseg table, but the tax part is not getting updated in WITH_ITEM TABLE,
can any help me out in this regard, its on high priority.
Regards
suresh

From the documentation of RFBIBL00:
Extended withholding tax functions:
Only transactions FB01 and FBV1 are supported for the extended withholding tax functions. Direct input is not supported.
The withholding tax data for BWITH must be transferred for every customer/vendor line item. The withholding tax data must come after the BBSEG data. A BWITH structure must be transferred for each withholding tax type.
Rob

With holding tax amount exceeds the cutomer/vendor line item amount 001

Hi Guru's,
I have an issue, is there any impact to change the withholding tax base amount 20% instead of 10%.When I change the base amount to 20% and post a document system return error message
"With holding tax amount exceeds the cutomer/vendor line item amount 001".Guide me on this issue.
And tell me the impact of previous open item documents.
Regards
Maruthi.

Thanks for all,
MY problem solved.
Regards
Maruthi

Optional With holding tax for a vendor

Dear All,
I want to make the with holding tax optional during MIRO.
I have already assign the tax code in vendor master and so it automatically deduct withholding tax.
But my vendor is a supplier as well as a broker for me. So when i want to pay him Brokerage I want automatic tax deduction which is happening but when i want to pay him for the material which he supplied to me also the tax get automatically deducted.
Can any body help me on this?
Thanks & Regards,
Rakesh

Hi Milind
Appreciate your prompt response, I am looking for information on what needs to be done for implementing with holding tax for Puerto Rico, May be I was wrong when I said I could not find any links on this subject either in SAP Help or else where. What I could not find was Information specific to Puerto Rico withholding tax. We normally have lots of information on WithHolding tax in SAP help and else where on the net.
I am looking for information specific to WithHolding tax for Puerto Rico.
Regards
KIM Khan

How to creat the Varient for 1099MISC With Holding Tax

How to create the Variant for 1099MISC With Holding Tax ?

HI,
please follow the below steps to create variant at report.
tcode se38
report RFIDYYWT
pass all the parameters
press save icon
give variant name
retrive the variant in report
tcode se38
report name RFIDYYWT
press : shift + F5
or get varinat icon.
I hope above will resolve your issue.
Regards
Madhu M

Calculation of with holding tax

The requirement goes like this.
We have to first remove the with holding tax data from the vendor master.
And created 1 KR(amount : 1000) & 1 RE(amount : 2000) document type.Also we posted both the above invoice documents in one Z1 clearing document.
Then add the with holding tax information in vendor master.
Then we executed the report RFWT0020 for that vendor and the document number.Its updating WITH_ITEM table with only the KR total(1000) under WT_QSSHH field.Its not considering RE total.
I debugged the program RFWT0020 and found a function module FI_WT_GET_P_WITH_ITEM which performs the with holding tax calculation.When i checked the function module,its fetching from global memory.
Is there any user exit or BADI for this.We are using 4.7 version.
Please suggest how can i update the correct with holding tax amount in WITH_ITEM table.

Hi,
i´ve used this badi for MM (incoming invoices):
MRM_WT_SPLIT_UPDATE
Best regards.

With holding tax Returns

Dear Sapgurus,
we are using 2 different with holding tax type one is at the time of inv posting and 2nd is payment posting which is earlier, we had created tax types and tax codes we assigned in vendor master assgined to company code and automatic posting also, finally if any vendor pay advance then we calculate tds it will post to tds g/l account, after that in sap any option how to file the tds returns.
Regards
Veeru

Dear,
Once you have posted TDS then usually at the month end you will run below transaction to complete the process..
1. Use transcation J1INCHLN (this will club all TDS posted per section and paid)
2. Use transaction J1INBANK (when you make TDS payment in Bank then bank will give you challan number which you have to update in the system)
3. Use transaction J1INCERT (this will print the vendor certificate (this is usually an year end practice)
4. Use transaction J1INMIS (this will provide consolidated report for TDS)
Regards,
Chintan Joshi

Regarding With holding tax with CIN version

Hello SAP gurus
I've done all the configuration required for the extended withholding tax type-also have updated the tax type and code in the vendor master.
How to configure automatic surcharge & education cess., With holding tax certificate . What is business place in tds.How to create remittance challan for tds.what is clearing of invoice against down payment.How to create Annual returns of tds.
While making tds entry with miro, systeam taking dummy profit center.
So what does configuration required for above error.
I will assign full points
Regards
Divya

Hi,
If i am not wrong, the system is reverseing the deduction it has made at the time of adv payment.
Its not deducting again.
Consolidate all the three documents -
- Adv pay
- Inv
- Payment
and you would appreciate the beauty of the concept.
Cheers
Raghu

With holding tax

Hi,
If i select With holding tab when entering Down payment request,Down payment and invoice for vendor, i am getting error message as Withholding Tax information missing from line item
Could you advise me where i made wrong cogfiguration for with holding tax.
Your immediate response will be highly appreciated.
With regards,
V.K

Hi
Check Feild status group of G067 in OB14 and make sure that these are optional and also the Feild status group of WHT GL accounts you have assigned.
There is always a possibility that these are in suppressed state.
Award points if useful.
sarma

WITH HOLDING TAX ON DOWN PAYMENT

HI
I am using TCode F-47 for down payment request to be paid to vendor. In Vendor Master Record with holding tax information is activated. But at the time of processing payment against down payment request using TCode F-58 With holding tax not deducted and full down payment requested amount getting debited to vendor.
Pl suggest me
Message was edited by:
Chandrakant.K Acharya

Hi Chandrakanth
u check once WHT settings at WHT type for Payment posting.here you remove inherit base option. for Cess claculating on TDS.
you check once define WHT codes for cess. here you calculate for 1% cess 0.022 % on TDS base amount or invoice amount. ex: inv: 100 , TDS 2.2 %. Cess 1% on 2.2% means 0.0220. like that you calculate.
Then you update cess tax codes in FK02,here u select liability option.
Then you can use f-47. here system showing popup with Base amount,TDS & cess codes.then you save it.
now you check with f-58. other wise you want temporly solution. go to FB02 change doc. there you can modify WHT amounts then save it.
ok all the best
Raj

How to caculate with holding tax using vendor number

Similar Messages

Maybe you are looking for