How to calculate 18.62 % dep on Assets

Hello plz anyone give me the advice on this issue.
Asset Dep to be provided
Method of Dep WDV 18.62%
Uselige of Years 10 years
I tried since so many times the dep is not calculating althogh plz give me the steps  required in this ?

Hi,
IMg-Fa-AA-Valuation-Depn key-Calculation methd-Multilevel method
In the levels folder, enter the base value as 24 and give the percent - 18.62, apart from other details
IMg-Fa-AA-Valuation-Depn key-Maintain Depn key
Give the multilevel method -as defined in previous step
Decl  Method: 001
class: 2 - Declining balance
Save & activate
Regards,
Sridevi
<i><b>Award points, if useful</b></i>

Similar Messages

  • How to calculate monthly booked value in asset?

    Dear Experts,
    i have a query in asset accounting. we are developing a report in asset for calculating month till date and year till date value of asset under project or w/o project.
    Can anybody tell me the logic and fields and table for find out the monthly value of an asset means how much cost/expense booked for an asset under project or for asset w/o project?
    Regards
    Arun

    Hi,
      You can refer ANLA table and field POSNR for WBS element.
    Regards,
    B. Radhika

  • How to calculate the depreciation for an asset under repair for a month

    Hi,
    I have placed an asset (Laptop) into service 01.01.2013 and I have calculated the depreciation for the 1st period and in the second period 01.02.2013 the laptop is broken and which was sent to the service center and for that entire month no depreciation is calculated. I wanted to start the depreciation for the same asset on 01.03.2013.
    how to process for the depreciation for 3rd period and for the 2nd month what should be the activity of the asset?
    Please explain in detail.
    Thanks,
    Santhosh.

    Hi,
    If you do not want to post depreciation for an asset, then assign depreciation key 0000 for the asset.
    OR
    Use the asset shutdown option in field status group in time dependent tab.
    Regards
    Srinivas

  • How to calculate acquisition value for specified day

    Hi,
    in my z program I have a problem how to calculate acquisition value for my asset for specified day.
    Example:
    I have asset created 8.7.2008 with TTYPE 104 (External asset acquisition) with value 5950.
    30.11.2008 there is another TTYPE 272 (Retirement of current-yr acquis., w/o revenue) with value 950.
    So BEFORE 30.11.2008 acquisition value is 5950. After is 5000. Is there any function module (or something else) in SAP system where I can send asset number and date a it return to me acquisition value for that day?
    Many thanks for any answer!

    Hi,
    your suggestion means that I have to compute acquisition value by myself (sum all TTYPE 1** - sum all TTYPE 2**). So SAP does't provide such functionality (LDB ADA have it, because it can compute acquisitiob value for specific day)?
    Mant thanks for answer

  • How to calculate the Current APC (Acquisition and Production Cost)

    Hi,
    Please help me how to calculate the Current APC.
    The Current APC (Acquisition and Production Cost) is a calculated value based on Previous Year Acquisition balance plus any value changes up to the time of the report.
    The Asset History Report (RAGITT_ALV01) calculates the Current APC value &
    The Current APC can also be found in the Asset Explorer (transaction code AW01N) under Country Book 10/ Posted Values tab then the line “Acquisition Value” and column “Posted values”.
    I suppose that the calculation of Current APC (Acquisition and Production Cost) is getting done in the GET statements in the report RAGITT_ALV01, but unable to find the actual logic.
    Please help me.
    Thanks in advance,
    Satish

    Hi,
    you'll find the logic in fm FI_AA_VALUES_CALCULATE
    A.

  • How to calculate the Current APC

    Hi,
    Please help me how to calculate the Current APC.
    The Current APC (Acquisition and Production Cost) is a calculated value based on Previous Year Acquisition balance plus any value changes up to the time of the report.
    The Asset History Report (RAGITT_ALV01) calculates the Current APC value &
    The Current APC can also be found in the Asset Explorer (transaction code AW01N) under Country Book 10/ Posted Values tab then the line “Acquisition Value” and column “Posted values”. 
    Thanks in advance,
    Satish

    Hi,
    I suppose that the calculation of Current APC (Acquisition and Production Cost) is getting done in the GET statements in the report RAGITT_ALV01, but unable to find the actual logic where it is being done.
    Please help me.
    Thanks in advance,
    Satish

  • How can i calcilate cost depreciation for assets

    Hi.
    can anybody tell me how can i calculate
    cost depreciation for an asset.
    i have used one function module DEPR_RECALCULATE.
    but it will allow only one date and it will calculate depreciation for total year .
    i want to pass the two date .
    how can i calculate depreciation between two periods.

    Hi,
    Check this FM: AM_ASSET_DEPR_CALCULATE
    Regards
    Kannaiah

  • How to reverse depriciation posted to an asset

    Dear All,
    how to reverse depriciation posted to an asset,since the ependiture posted is not captial but revenue,after reversing how to delete the the asset values and reverse the purchase doc so that it can be poste das revenue expenditure

    Hello surya
    if an asset has been capitalized by "accident" we have the following options:
    - change depreciation key to 0000 (this corrects the depreciation in fiscal year open in AM)
    - if aquisition has been carried out in prior closed fiscal years: post a write up in current fiscal year(because you have to correct the depreciation of prior years, the dep is wrong - and maybe unauthorized) TC abzu
    - now post a scrapping TC ABAVN
    Now the asset history sheet and the values of the GL are correct.
    What do you think about my idea?
    Best regards
       Horst

  • How to calculate interest and tds

    friends,
    we have one asset where it is provided by our business partner. every month we have to pay interest based on the mail received from business partner. my query is how to post this interest in the system, how to calculate the tds on this,
    regards,

    Hi Subramaniyan,
       1. You need to configure interest calculation all the steps.
    http://www.sap-basis-abap.com/sapfj001.htm
    or
    OB46 - Interest Settlement Calculation Type
    Int Calc. Type
    P - calculate interest based on line items.
    S - calculate interest based on account balances.
    Secornd, make it avaliable to the interest run program.
    OB82 - Interest Terms
    Third, determine the interest rate that will be used by the calculation.
    OBAC - Define Reference Interest Rates
    OB83 - Enter the Reference Interest Rates Value
    Fourth, assign the interest indicator to the reference interest rate.
    OB81 - Define Time Dependent Terms
    Finally, determine the how and to which accounts the interest program will post.
    OBV1 - Prepare Interest on Arrears Calculation F.26    A/R: Balance Interest Calculation
       2. Create Recurring Entries.  fbd1
    http://help.sap.com/saphelp_46c/helpdata/EN/6e/1218df9f0411d189b80000e829fbbd/content.htm
      3.  Process Batch Input   sm35
    Regards,
    Srinivas Muthyala

  • How to add the new dep area in existing cod

    Dear all,
    how to add the new dep area in existing cod we are planing to implement the IFRS by using leading ledger and non leading ledger present we are using OL leading ledger
    present we are using dep area 01 ,15
    how to achive the parallel accounting in asset accounting how to add new dep area 30 in existing COD
    if any document plz refer me  

    Hi Bhayyapu,
    Please refer to the links given below.
    New Depreciation area
    Adding a New Depreciation Area to Existing Assets - Financial Accounting (FI) - SAP Library
    Hope this will help you.
    Regards
    Eugene

  • How to Open & Close the periods in Asset Accounting for Depreciation.

    Dear All,
    How to to How to Open & Close the periods in Asset Accounting for Depreciation ? Please let me know
    If there is any T.Code or procedure for it.
    Your help is highly appreciated.
    Thanks & Regards,
    Pankaj.

    Dear Alex ,
    1) I am facing one problem that one of my asset 123 I Capitalized on 13.09.2006 have deactivated on
    14.05.2008. with value of Rs.1.00.000/- all the activities are closed down related it on deactivation date.
    In 2009 a new asset 456 purchased with different value. But in T.code OARP in column cumulative acquisition
    value it is showing value of Asset 123 instead of it's own capitalization value.
    2 ) And about my Asset 123 it is also showing a Cumulative Acquisition value in year 2009 which it
    should not display because I have already deactivated that asset. ( The same checked in AR03 )
    Please help.
    Your help is highly appreciated.
    Regards,
    Pankaj.
    P.S :- Keep the discussion on for further assistance.

  • How to calculate totals in Blocked ALV Report

    Hi All,
    Can any body tell how to calculate totals & sub totals in
    Blocked ALV Report[Blocked List].
    Thanks in advance
    Thanks & Regards,
    Rayeezuddin.

    read this it might help
    Sums                                                       
    15. No_sumchoice(1) TYPE c : This parameter allows the choice for summing up
    Only by fieldcatalog.
    Value set: SPACE, 'X'
    'X' = fields which are to be summed, passed by the calling program (FIELDCAT-DO_SUM = 'X'). The user should not be able to change this value interactively.
    16. No_totalline(1) TYPE c : Removes the option of having totals after sub-totals.
    Value set: SPACE, 'X'
    'X' = no total record is to be output. Subtotals can still be calculated and output. The fields in the subtotals are flagged DO_SUM = 'X' in the field list.
    17. No_subchoice(1) TYPE c : Does not allow the user to interactively change the field chosen for subtotals.
    Value set: SPACE, 'X'
    'X' = value whose change triggers subtotals, provided by the calling program. The user should not be able to change this value interactively.
    18. No_subtotals(1) TYPE c : No subtotals possible          
    Value set: SPACE, 'X'
    'X' = no subtotals.
    19. Numc_sum(1)  TYPE c : Totals only possible for NUMC-Fields.
    20. No_unit_splitting TYPE c: No separate total lines by inh.units   
    21.totals_before_items TYPE c: Display totals before the items   
    22. Totals_only(1) TYPE c :  Show only totals      
    Value set: SPACE, 'X'
    'X' = only total records are output.
    23. Totals_text(60) TYPE c : Text for 1st col. in totals   
    Value set: SPACE, string (max.60)
    ' ' = The first column in the total record contains an appropriate number of '*'s to indicate the total by default. If the first column is wide enough, the string 'Total' is output after the asterisks.
    'String’ = The string passed is output after the total indicated by '*', if the column is wide enough.
    24. Subtotals_text(60) TYPE c : Texts for subtotals
    Value set: SPACE, string (max.60)
    ' ' = In the first column of subtotal records, the subtotal is indicated by an appropriate number of '*' by default. If the first column is not a subtotal criterion, the string 'Total' is output after the asterisks, if the column is wide enough.
    'String’ = the string passed is output after the subtotal indicated by '*', if the column is wide enough and the first column is not a subtotal criterion. If it is a subtotal criterion, its value is repeated after the total, if the column is wide enough.
    ELSE TELL ME I WILL PASTE COMPLETE HELP
    regards

  • How to Calculate Opening balance

    Hi BW Gurus,
    How to calculate Opening balance for previous period using variables in Reports using debit and credit.
    Example:
    Opening balance is the balance for an account for the previous period. In other words, if the user is running a report for Period 1, 2006, the opening balance is actually the ending balance from Period 12, 2005 (December 31st, 2005).
    Thanks in advance
    DJ

    Hi Friend,
    If Your Prob is solve then tell me how to find perticular month balance amount.
    i m create cash book report for perticuler GL Account , i use BKPF + BSEG for this
    i found all entries,
    But at last i want to Opening Balance for perticuler date.
    like     01/05/2007 opening balance = 10000 as per tcode FS10N
    and in 26/05/2007 ??????
    how to find exact date opening balance is there any function for same
    or any procedure..
    Thanks
    From
    Gaurav

  • HOW TO CALCULATE OPENNING BALANCE

    HI Experts..
    How to calculate Opening balance for previous period using variables in Reports using debit and credit.
    Example:
    Opening balance is the balance for an account for the previous period. In other words, if the user is running a report for Period 1, 2006, the opening balance is actually the ending balance from Period 12, 2005 (December 31st, 2005).
    I am Using 0FIAR_O03 ODS ..
    Very Urgent Issue..
    If Possible Stp by Step..
    Cheers
    Purushottam
    09891683828
    [email protected]

    Hi Saloni,
    to get the debit and credit you would be using a variable 0I_FPER(Fiscal year / period), which is a user entry interval variable.
    now to get the opening balance you will have to create a customer exit valiable and the low value of 0I_FPER will have to popuplated by writied the code for the customer exit valiable. you will have to restrict the key figure DEB_CRE_LC for this customer exit variable with the operand as less than(< Fiscal Year /Period from 0I_FPER)).
    If the above was useful please assign reward points.
    Regards
    Venkata Devaraj

  • How to calculate Opening balance for a customer?

    Hi Experts,
    How to calculate Opening balance for a customer? I am trying to develop a report where in i have to get opening AR balance,current sales,adjustments etc of a customer. Please let me know how can i do this. I have some tables with me KNC1, BSAD, BSID.
    Thanks in Advance.
    Sharat Chandra.

    Say for example ..
    Get the opening bal for Customer 'K' in CCode 'C1' in 2008 ..
    First get all items from BSEG ..
    Select * from BSEG where KUNNR eq 'K'
                                     and BUKRS eq 'C1'
                                     and GJAHR eq '2008' .
    Sum all the DMBTR values (This is the total value).
    Second get the cleared items form BSAD for the above entries;
    Select * from BSAD for all entries in BSEG where KUNNR and BUKRS and XBLNR eq BSEG-XBLNR.
    Sum all DMBTR values ( this is cleared value).
    Third substract the cleared value from total to get Open value.
    This is a overview .. you should go to the tables and look for fields and etc.. and then define the logic meeeting your requirements .... this is a genric undersatnding ....
    Thanks,
    Aditya. V

Maybe you are looking for