How to calculate spacing & depth/stack with this kind of image slider.

Hello,
Does anyone can give me a jump start on how to setup calculations to create this kind of carousel?
I followed some tutorials about carousels but they all move in eliptical way. The carousel that i have to make
does not have to move in eliptical way, but like the image below. The controller for this carousel is a scrollbar that
i already made. Some tips would be apriciated!

as your slider moves from the far left to the next position to the right, each of your boxes scales and moves - those to the right of the current position scale up and those to the left scale down unless you're using 3d positioning to move boxes forward and back.  each box moves to the left, except the far left box which moves to the far right.
there will be depth management that you'll need to handle, too.

Similar Messages

  • How to obtain a perfect line with this kind of scientific data graphs?

    In a lab the students get this kind of graphs to later be processed in an axial system:  a grayed pencil draw, very delicate, with all the imperfections in weight, intensity, etc.
    We need to obtain an uniform line (a solid one, without gray variations, same weight, etc)
    Autotrace seems the best tools although the results appear a little irregular.
    What could be the best approach as we have hundreds to process?
    Beginning with the scanning (more resolution?) and procesing firstly in Photoshop?
    Thank you.

    Your pink line looks exaclty like the first image you posted. Did you possibly swap the cyan and magenta colors in the legend (cyan looks less bumpy so so guessign that is actually you bezier path)?
    If the legend is swapped, then you should see the path is off immediately after using make work path in photoshop. If the dpi of your scan is high enough (eg: a of minimum1000 pixels in each direction, and tolerance setting is low enough, you should get better resutls.

  • How many users do i have with this account?

    How many users do i have with this account?

    Hi darylm32102489,
    Which account are you referring to? I see that you have an Acrobat subscription--is that what you're asking about? Or are you referring to your Acrobat.com online storage account?
    If you're referring to an Acrobat subscription, please see this FAQ for information regarding licensing: https://helpx.adobe.com/x-productkb/policy-pricing/acrobat-pro-xi-subscription-faqs.html#i d_83547
    Please let us know if you have additional questions.
    Best,
    Sara

  • I am trying to send an email to myself and BCC everyone in my address, but have forgotten how. Can someone help me with this?

    I am trying to send an email to myself and bcc everyone in my address book, but have forgotten how. Can anyone help me with this? Thanks.

    http://chrisramsden.vfast.co.uk/7_How_do_I_send_to_everyone.html

  • How to calculate any two date with diffence calculation by using obiee11g?

    Hi,
    i have a requirement like,
    location wise current month and previous month with movement calculation,can to tell me how to calculate any two date with diffence calculation
    by using obiee11g
    Note,
    I tried to implemented ago function as well as dynamic two dates calculation using $2-$1 methods..but i am getting the o/p it's self i am getiing some null value also that' why it's not tallying with our actual report.
    i tired to used ifnull(mesaurecolumn,0) also case condition on the mesaure colution still it's not tallying.
    THanks and Rds,
    Devarasu.R

    Hi,
    for Date Difference........
    TimestampDiff(interval, timestamp1, timestamp2)
    ex:TimestampDiff(SQL_TSI_DAY, cast('1-apr-2011' as date), current_date)
    Where:
    interval
    The specified interval. Valid values are: SQL_TSI_SECOND, SQL_TSI_MINUTE, SQL_TSI_HOUR, SQL_TSI_DAY,
    SQL_TSI_WEEK, SQL_TSI_MONTH, SQL_TSI_QUARTER, SQL_TSI_YEAR.
    Cheers,
    Aravind

  • HT3775 how do you play a video with this format/title DVDSCR XViD AC3-sC0rp?

    How do you play a video with this format " DVDSCR XViD AC3-sC0rp" using quicktime?

    Try this. It can handle formats Quicktime can't:
    VLC

  • Does anyone know how to activate siri with a button on a 2011 Chevy Silverado that has blue tooth.  Also I'd like to know how to sync my iphone contacts with this same truck.

    does anyone know how to activate siri with a button on a 2011 Chevy Silverado that has blue tooth.  Also I'd like to know how to sync my iphone contacts with this same truck.

    Hold down the mute button on the steering wheel until you hear,"Ready" and then say "Voice". That will bring up Siri.

  • My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

    My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

    I was having the same problem, I backed up my phone and then updated to iOS 5 and then it kept telling me it could not restore from my backup as it had failed.  After reading a bunch of forums and posts and trying everything, I did manage to get it to work.  I had tried the Time zone, creating a new computer user account, disabling anti-virus, etc.
    It took a combination of things, one of which was disabling the anti-virus completely and copying the contents of the backup folder to my desktop and then deleting everything in the backup folder.  Then I rebooted the PC, entirely disabled the anti-virus, copied the one backup I wanted to restore from the desktop to the backup folder and then trying to restore.  Low and behold the phone said restoring from backup and I am back in business, so when in doubt, trying combining some of the fixes together.

  • In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

    In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
    os x, Mac OS X (10.6)

    I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum. 

  • HELP!!!!! How do I set the BPM with this program?

    Hi all,...can someone please help me with this soundtrack pro 2? I;m a newbe at a mac, i came from windows using protools now im on this mac (which i love) but i'm lost How do i change the BPM for the whole project? i see it in the window on the bottom right, but when i change it,.it dont do anything, it still sounds the same. Can you please help? Thanks for your time.
    HYPE
    www.djhypelive.com

    Setting the tempo in STP will change the tempo of any audio files that have apple loops information - that is, they have metadata in the audio file that gives STP an indication of where the beats lie. So if the audio file doesn't have that metadata, it's not going to change with the tempo change in STP.
    I don't have Logic, but that might have some kind of beat detection analysis that you can run for that song, and change it there. The other option is to try to add that information to the audio file using the Apple Loop Editor. Soundtrack alone is not going to help you.

  • When ever I launch my safari, it will stay on for about a minute and then quits on me. It has a "safari quit unexpectedly" dialog box with a bunch of codes that I can send a report to apple. im not very good with this kind of thing, plz help!

    Im not very good at troubleshooting, but I have played around with the system preferences. My airport connection is fine as well as the ethernet. Firewall says its not connected, (im not sure if that matters or not?)
    I have subtracted my network from the list, restarted, and then put it back and and restarted...nothing seems to be working. Iam in the middle of a correspondace course and i really need my internet back...any suggestions would be greatly appreciated!
    Thank you

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Then GULP, check for this...
    Flashback - Detect and remove the uprising Mac OS X Trojan...
    http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
    In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
    /Library/Little Snitch
    /Developer/Applications/Xcode.app/Contents/MacOS/Xcode
    /Applications/VirusBarrier X6.app
    /Applications/iAntiVirus/iAntiVirus.app
    /Applications/avast!.app
    /Applications/ClamXav.app
    /Applications/HTTPScoop.app
    /Applications/Packet Peeper.app
    If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
    http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
    http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
    The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.

  • How to cast vector to vector with out using loop. and how to override "operator =" of vector for this kind of condition.

    Hi All How to TypeCast in vector<>...  typedef  struct ...  to class... 
    //how to cast the vector to vector cast with out using loop
    // is there any way?
    //================ This is Type Definition for the class of ClsMytype=====================
    typedef struct tagClsMytype
    CString m_Name;
    int m_Index;
    double m_Value;
    } xClsMytype;
    //================ End of Type Definition for the class of ClsMytype=====================
    class ClsMytype : public CObject
    public:
    ClsMytype(); // Constructor
    virtual ~ClsMytype(); // Distructor
    ClsMytype(const ClsMytype &e);//Copy Constructor
    // =========================================
    DECLARE_SERIAL(ClsMytype)
    virtual void Serialize(CArchive& ar); /// Serialize
    ClsMytype& operator=( const ClsMytype &e); //= operator for class
    xClsMytype GetType(); // return the typedef struct of an object
    ClsMytype& operator=( const xClsMytype &e);// = operator to use typedef struct
    ClsMytype* operator->() { return this;};
    operator ClsMytype*() { return this; };
    //public veriable decleare
    public:
    CString m_Name;
    int m_Index;
    double m_Value;
    typedef struct tagClsMyTypeCollection
    vector <xClsMytype> m_t_Col;
    } xClsMyTypeCollection;
    class ClsMyTypeCollection : public CObject
    public:
    ClsMyTypeCollection(); // Constructor
    virtual ~ClsMyTypeCollection(); // Distructor
    ClsMyTypeCollection(const ClsMyTypeCollection &e);//Copy Constructor
    DECLARE_SERIAL(ClsMyTypeCollection)
    virtual void Serialize(CArchive& ar);
    xClsMyTypeCollection GetType();
    ClsMyTypeCollection& operator=( const xClsMyTypeCollection &e);
    ClsMyTypeCollection& operator=( const ClsMyTypeCollection &e); //= operator for class
    void Init(); // init all object
    CString ToString(); // to convert value to string for the display or message proposed
    ClsMyTypeCollection* operator->() { return this;}; // operator pointer to ->
    operator ClsMyTypeCollection*() {return this;};
    public:
    vector <ClsMytype> m_t_Col;
    //private veriable decleare
    private:
    //===================================================
    ClsMytype& ClsMytype::operator=( const xClsMytype &e )
    this->m_Name= e.m_Name;
    this->m_Index= e.m_Index;
    this->m_Value= e.m_Value;
    return (*this);
    //==========================Problem for the vector to vector cast
    ClsMyTypeCollection& ClsMyTypeCollection::operator=( const xClsMyTypeCollection &e )
    this->m_t_Col= (vector<ClsMytype>)e.m_t_Col; // how to cast
    return (*this);
    Thanks in Advance

    Hi Smirt
    You could do:
    ClsMyTypeCollection* operator->() {
    returnthis;};
    // operator pointer to ->
    operatorClsMyTypeCollection*()
    {returnthis;};
    public:
    vector<ClsMytype>
    m_t_Col;//??
    The last line with "vector<xClsMytype>
    m_t_Col;". It compiles but I doubt that is what you want.
    Regards
    Chong

  • How to calculate PR converted to PO this month

    Hi experts,
    Can any one guide me on this issue both modelling and reporting.
    Selection Parameter from table EBAN u2013
    Plant (WERKS) u2013 As per selection criteria entered by the user
    Processing Status (STATU) u2013 B
    Release indicator (FRGKZ) u2013 2
    Requisition Date (BADAT) u2013 01.09.2009 to Last Month Date as entered by the user.
    Based on above select query fetch all the PO numbers for each of the PR from table EBAN.
    Then filter from above fetched POu2019s from table EBAN based on below selection criteria from table EKKO u2013
    Company Code of Plant  (BUKRS) u2013 Company Code of Plant entered by the user
    Created on (AEDAT) - 01.07.2010 to 19.07.2010 (If user is executing report on 19.07.2010)
    PR converted to PO this month = Count of the PO filtered based on above selection criteria
    Regards
    Rk

    Hi,
    I am bit confused with your requirement.
    EBAN table is for PReqs. In EBAN table if you put STATU (Processing status of purchase requisition) as B then you get all the PReqs which got converted into POs. So this will provide you the number of PReqs converter on POs for given date selection.
    If this is your requirement then staging of EBAN will satisfy your need. Just check how you are providing seletions for date/plant in report.
    If you want to display same data from EKKO table as well in report or you want to filter some values on the basis of data in EKKO field then you need to stage EKKO as well.
    Now question how to model this?
    As you said 1. Create Infoset of cubes in BW 2. Create a View in R/3
    Both are same approach as for both you need to create one join (Infoset or View) now question is that how to join both tables or Cubes. I don't think is there any key on which you may join both because in both the tables key is PO number and PReq number. Both are seperate from each other so we can not join both unless we have some link. The link is available in EKET table so we need to stage that as well.
    If you can provide the filed list and filter conditions in required report then we can think of better option.
    I hope it will help.
    Thanks,
    S

  • HT1549 how do you cut and paste with this mouse??

    Can someone please tell me how I can cut and pasteon this imac with my mouse?? Thank you

    Mouse
    Drag and drop.
    Key board shortcuts
    command + c
    command + option + v (cuts and pastes the selection)

  • How to calculate correct week startdate with given date

    import java.util.Date;
    public class MyDate
    public static void main(String args[]){
    Date d1 = new Date();
    System.out.println("The system date is "+d1.toString());
    //enter some date and it should get starting date and ending date
    //say for sample I enter 01/23/2006 and it should get
    //start date as 12.00 AM 01/23/2006 and end date as 11.99 01/29/2006
    //and it should automatically do whatever that gets for current
    //date
    Hi,
    I have some date has current date and it should calculate starting date of the week and the
    the next date that is 7 days old with one second less as described below
    //enter some date and it should get starting date and ending date
    //say for sample I enter 01/23/2006 and it should get
    //start date as 12.00 AM 01/23/2006 and end date as 11.99 01/29/2006
    //and it should automatically do whatever that gets for current
    //date
    Any help in this regard is appreciated.
    Thanks
    Chatf

    For starters, you'll want to use the java.util.Calendar class.

Maybe you are looking for