How to calculate the data as per accounting year

I want to dispaly the result for  the accounting year from April to March for any accounting year (Accounting year is from April to March).
I have a table INVOICE.
CREATE TABLE INVOICE
  IN_NO       NUMBER,
  IN_DT       DATE,
  IN_DETAILS  VARCHAR2(20 BYTE)
I want to calculate display the result for accounting year from April 2010 to March 2011, and from April 2011 to MArch 2012.
What statement should i use to filter the data as above ?
Sanjay

user12957777 wrote:
I want to dispaly the result for  the accounting year from April to March for any accounting year (Accounting year is from April to March).
I have a table INVOICE.
CREATE TABLE INVOICE
IN_NO       NUMBER,
IN_DT       DATE,
IN_DETAILS  VARCHAR2(20 BYTE)
I want to calculate display the result for accounting year from April 2010 to March 2011, and from April 2011 to MArch 2012.
What statement should i use to filter the data as above ?
Sanjay
You should learn now to use correct tags
select to_char(add_months(in_dt,-3),'YYYY') FISCAL_YEAR FROM INVOICE;                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • How to calculate the data in bex

    Dear all,
                i have a service order no and it current active status  and it time stamp details in my query
    example
    sevice orer no  posting date name    current active status  active status date    part aging
    800000243      15.01.2009   shahina part despatched          A     17.01.2007  
    in my ods i have
    sevice orer no  posting date name    current active status  active status date    part aging
    800000243      15.01.2009   shahina part despatched          A    17.01.2007  
    800000243      15.01.2009   shahina part pending               x    16.01.2007  
    800000243      15.01.2009   shahina part for asp                 x    17.01.2007  
    i want to calulate the aging of part pending to part despatched
    17.01.2009   -   15-01.2009   = 2 days
    i want to display in my bex like this
    sevice orer no  posting date name    current active status  active status date    part aging
    800000243      15.01.2009   shahina part despatched          A     17.01.2007      2
    ( in bex report i want to display only active status )
    can any one help me please to solve this issue
    Regards
    shahina

    Hi vamsi talluri ,
      i working in crm reports ( service ) here i want to calulate the differance between the old status that is inactive status date to part despathed date
    sevice orer no  posting date name    current active status  active status date    part aging
    800000243      15.01.2009   shahina part despatched          A     17.01.2007  
    in my ods i have
    sevice orer no  posting date name    current active status  active status date    part aging
    800000243      15.01.2009   shahina part despatched          A    17.01.2007  
    800000243      15.01.2009   shahina part pending               x    16.01.2007  
    800000243      15.01.2009   shahina part for asp                 x    13.01.2007  
    i want to calulate the aging of part pending to part despatched
    17.01.2009   -   13-01.2009   = 4 days
    i want to display in my bex like this
    sevice orer no  posting date name    current active status  active status date    part aging
    800000243      15.01.2009   shahina part despatched          A     17.01.2007      4
    in bex i am dispaying only active satus but i want calculate diff bet active status which i am dispalying in the bex analyzer and old status whaer the data are available in sercice order ods
    please help me how to perform the calculation
    Regards,
    shahina..!
    ( in bex report i want to display only active status )
    can any one help me please to solve this issue
    Regards
    shahina..!
    Edited by: Shahina A on Jan 21, 2009 6:13 AM

  • How we calculate the date difference between two list in SharePoint 2010

    Hi friend's....I have two list first is list1. In this list i have two coulmn start_date and End_date. In second list2 i have two column HolidayName and Holiday_date. Now i want two find the number of day in list1 Excluding Weekend and Holiday_date(that
    column from list2). How i will do ..? Please help me dosto..

    Thanks for reply...
    I have done the date difference in list1. But i want to Exclude the Holiday_date form list2.
    I have list1 - Start_date , End_date, Number_of_day(Exclude weekend and Holiday_date between Start_date and End_date )
    list2 - HolidayName, Holiday_date
    Now how i will calculate the Number_of_day in first list.

  • How do I delete one of the user accounts on my computer and not lose the data in that account?

    How do I delete one of the user accounts on my computer and not lose the data in that account?

    I actually have the opposite of this problem. haha.
    https://discussions.apple.com/thread/4484354

  • How to calculate the hour difference between two dates?

    hi all,
    how to calculate the hour difference between two dates?
    eg i trying this...
    ((TO_DATE(TO_CHAR(GRNi.reference_date_4,'hh24:mi'),'hh24:mi') -
    TO_DATE(TO_CHAR(NVL(GRNi.reference_date_3,SYSDATE),'hh24:mi'),'hh24:mi'))*24)*60 Act_Hr
    Reg.
    AAK

    Hi
    To break the diff between 2 dates into days, hours, minutes, sec -- you can use the following:
    select to_char( created, 'dd-mon-yyyy hh24:mi:ss' ),
    trunc( sysdate-created ) "Dy",
    trunc( mod( (sysdate-created)*24, 24 ) ) "Hr",
    trunc( mod( (sysdate-created)*24*60, 60 ) ) "Mi",
    trunc( mod( (sysdate-created)*24*60*60, 60 ) ) "Sec",
    to_char( sysdate, 'dd-mon-yyyy hh24:mi:ss' ),
    sysdate-created "Tdy",
    (sysdate-created)*24 "Thr",
    (sysdate-created)*24*60 "Tmi",
    (sysdate-created)*24*60*60 "Tsec"
    from all_users
    where rownum < 50
    HTH
    RangaReddy

  • How to calculate the HFM Cube size in SQL Server-2005

    Hi
    How to calculate the HFM Cube size in SQL Server-2005 ?
    Below query used for Oracle. Then what is query for SQL Server?
    SQL> select sum(bytes/1024/1024) from dba_segments where segment_name like 'FINANCIAL_%' and owner='HFM';
    SUM(BYTES/1024/1024)
    SQL> select sum(bytes/1024/1024) from dba_segments where segment_name like 'HSV FINANCIAL%' and owner='HFM';
    SUM(BYTES/1024/1024)
    Regards
    Smilee

    What is your objective? The subcube in HFM is a concept which applies to the application tier - not so much to the database tier. The size of the subcube is the unique number of data strips (data values for January - December inclusive, for example) for the given entity, currency triplet or Parent.Child node. You have to account for parent accounts and customs which don't exist in the database but are generated in RAM in the application tier.
    So, if your objective is to find the largest subcubes, you could do this by querying the database and counting the number of records per entity/value (DCE tables) or parent.child entity combination (DCN tables). I'm not versed in SQL, but I think the script below would just tell you the schema size and not the subcube sizes.
    Check out Accelatis.com for a third party software product that can do this for you. The feature is called the Subcube Analyzer and was written by the same team that wrote HFM, so they ought to know how this works :-)
    --chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to calculate the previous year YTD balance in profit & loss statement

    Dear all,
    I would like to seek for advice on how to calculate the previous year YTD (Year to date) balance in profit & loss statement
    For example, if I enter May 2009, the YTD value should be a sum up of value from Jan to May.
    I have tried the current year YTD could be set in column selection dimension "financial period"
    FACT PER( Code = YearFirst(@Per):@Per )  Order By PER.Code Descending
    Then, I tried the previous year YTD in another column using
    FACT PER( Code = YearFirst(@Per-12):@Per-12 )  Order By PER.Code Descending
    But it failed -> Abnormally display three column, while the financial period I enter 200903 in parameter @Per
    Would anyone kindly help me on that?
    Regards,
    Simon Chiu

    Dear Jim,
    Thanks for your reply.
    However, the problems still cannot be solved.
    My expected output is 1 column listing the YTD value from previous year.
    I have tried two times using both the Code = YTD(@Per-12) and Code = YearFirst(@Per)-12:@Per respectively. However, the Excel display various column.
    I am using Financial Period 200903. In the last three column, it display the data in Financial Period 200901, 200902 and 200903 respectively.
    For the current year, the YTD is correct and show 1 column listing the sum of account in the Financial Period 200901, 200902 and 200903
    Would you kindly advice the code setting and how to set? Also, how I can access the syntax builder?
    Regards,
    Simon Chiu

  • How to calculate the row size

    Hi,
    I am having a table of 4 column. First column is varchar2(10), Second column is Number(5), Third column is char(10) and Fourth column is Number(12,2).
    Now how to calculate the size of each row. I want to know how much space it will take for each row.
    Thanx & Regards,
    Swarup

    For a complete discussion of storage requirements for different datatypes see the Oracle 8i Concepts manual.
    All Oracle documentation is available on-line via the 'Documentation' link on the OTN home page.
    Your Col2 NUMBER(5) will take 4 bytes if it holds a 5 digit positive or negative number.
    Your Col4 NUMBER(12,2) will take 7 bytes if it holds a number with 12 digits that is positive and will take 8 bytes if it holds a number with 12 digits that is negative.
    The following is from the Concepts manual Chapter 12 (Copyright by Oracle)
    Built-In Datatypes 12-9
    Internal Numeric Format
    Oracle stores numeric data in variable-length format. Each value is stored in
    scientific notation, with one byte used to store the exponent and up to 20 bytes to
    store the mantissa. The resulting value is limited to 38 digits of precision. Oracle
    does not store leading and trailing zeros. For example, the number 412 is stored in a
    format similar to 4.12 x 10 2 , with one byte used to store the exponent (2) and two
    bytes used to store the three significant digits of the mantissa (4, 1, 2). Negative
    numbers include the sign in their length.
    Taking this into account, the column size in bytes for a particular numeric data
    value NUMBER ( p), where p is the precision of a given value, can be calculated
    using the following formula:
    ROUND((length( p)+ s)/2))+1
    where s equals zero if the number is positive and s equals 1 if the number is
    negative.
    Zero and positive and negative infinity (only generated on import from Version 5
    Oracle databases) are stored using unique representations. Zero and negative
    infinity each require one byte; positive infinity requires two bytes.
    null

  • In labview,how to calculate the parameters of the bilinear model that simulates the generation electroencephalogram?

    Dear Sir or madam:
    I have collected a lot of electroencephalogram data, which looks like a continuous sine wave plus a noise signal. what i want to do now is to fit the data with the bilinear model as the attached jpg file. the problem is the parameters of the model are changing with the evolution of the signal. would someone like to tell me how to calculate the parameters in the bilinear model?
    thank you very much
    Attachments:
    Bilinear_Model.jpg ‏33 KB

    I can point you in the right direction, but probably not answer your question really well. If you have the pro or full distribution of LabVIEW, you can use the curve fitting VIs to match any set of data to a theoretical curve. The curve fitting Express VI may do all you need to do (use the nonlinear option). To get the signal evolution, break your data into pieces and process each. If you need to average a bit, you can use a sliding window of your data for each analysis, moving the window less than the window width for each analysis.
    There are a plethora of curve fitting techniques built into LabVIEW - matrix operations, linear and log linear fits, Levenberg-Marquardt methods, downhill simplex, etc. You will probably need to experiment a bit to get a stable
    algorithm for your case. Check your literature for ways other people have done this. There may be an easy, stable method out there.
    If you are unfamiliar with curve fitting techniques, or you do not have the pro or full versions of LabVIEW, I would recommend "Numercial Recipes in C" by Press et. al., published by Cambridge University Press. The chapter on Modeling of Data will get you going. The rest of the book will provide any background you need.
    This was a very general answer. If you need something more specific, let me know. Be aware that this type of problem usually requires some trial and error to get right. The answers should be tightly scrutinized before being believed.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • How to get the data from Pooled Table T157E.

    Hi Experts,
    How to get the data from Pooled Table T157E.
    Any help.
    Thanks in Advance,
    Ur's Harsha.

    create some internal table similar to T157E and pass all data as per SPRAS.
    After that use internal table in your program as per the requirement.
    Regds,
    Anil

  • How to calculate Average balance for an account

    Hi,
    How to calculate average balance for an account for a particular period say for JAN-12 period and after the end of that period for another two days 01-feb-12 and 01-feb-12 ?
    I'm using the following query :
    SELECT cc.segment1||'-'||cc.segment2||'-'||cc.segment3||'-'||cc.segment4||'-'||cc.segment5||'-'||cc.segment6 "Account_XX",
    nvl(sum(l.accounted_dr - l.accounted_cr),0) "Balance"
    FROM gl_code_combinations cc,
    gl_je_lines l
    WHERE cc.code_combination_id = l.code_combination_id
    AND l.set_of_books_id ='XX'
    and code_combination_id = replace it with code combination_id for account_xx
    AND l.effective_date <= '31-Jan-12' (january period end ??)
    GROUP BY cc.segment1||'-'||cc.segment2||'-'||cc.segment3||'-'||cc.segment4||'-'||cc.segment5||'-'||cc.segment6
    There are some discrepancies in "average balance" after end of month (Jan-12)?
    How to calculate average balances for a particular account (Account_XX above)from end of month of Jan to first two days of february?
    Thanks,
    Kiran

    Kiran,
    Please let me know first, is Average Balancing feature enabled in your GL Ledger?
    Regards
    Muhammad Ayaz

  • How to calculate the variance in PO price history?

    hi
    i hav standard report ME1P, since i need to do some modifications in this program i copied to Y prgrm,,,'
    im getting all the values properly...
    but my prblm is im not getting how to calculate the variance? im not getting the logic behid it...
    can anybody expln me in breif plz....
    Regards
    Smitha

    Hi Venu,
    there is another way as well, however, you won't be able to see Variance and Variance% as a saperate keyfigure which is not under the period. Thats the reason I didn't mention it earlier.
    What you can do is, Drag the period to the columns, Now create a structure that has the two keyfigures std price, moving price. Here if you add Variance and Variance%, Then these CKF's would come under period as well, which you don't need. And the system won't allow you to add these CKF's outside this structure. The reason being because the interpretation of the data then wouldn't make any sense here. You can create a new structure as well with these CKF's but they would become a subpart of your previous structure.
    choose the required characteristics in the Rows section. Save it.
    Let us know, Sorry man, can't help u much at this problem.
    regards,
    Sree.

  • How to calculate the quota base quantity in quota arrangement?

    Hi all,
    As we all know, when a new supplier is added in the quota arrangment, we take the help of quota base qunatity so that the new supplier does not get any unfair advantage over the existing suppliers. Would you please help me on how to calculate the quota base quantity or on what basis the quota base quantity is calculated?*
    Regards,
    Ranjan

    Dear,
    Quota arrangement divides the total requirements generated over a period of time among the sources of supplied by assigning a quota.
    Quota u2013 quota is equal to a number and its represents the proportionate of requirements. Total quota of all the vendors is equal to 100% of requirements.
    This quota arrangement is also specific to material and plant level.
    Quota rating = quota allocate quantity + quota base quantity / quota.
    Quota based quantity used only when a new vendor introduced.
    In the as on date situation, the minimum quota ratings will considered as preferred vendor.
    The 2 vendors has 2 same quota rating, the vendor who is having the highest quota will considered first.
    In the running quota, a new source of supply is included. (In situation of short supply) including a new source not means to reduce the quota for existing.
    Regards,
    Syed Hussain.

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER

    제품 : FIN_GL
    작성날짜 : 2006-05-29
    HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER
    =============================================================
    PURPOSE
    특정 기간의 Balance 를 Account 별로 Transfer 하는 방법에 대해 알아 보도록 한다.
    Explanation
    GL 의 Mass Maintenance 기능을 이용하면 한 Account 에서 다른 Account 로 혹은 Multiple Account 에서 다른 하나의 Account 로 Balance 를 이동 시킬 수 있다.
    1. GL Responsibility 에서 Other> Mass Maintenance 를 선택한다.
    2. Move/Merge 작업을 위한 Request Name 과 Description을 입력한다.
    3. Request Type 으로 Move 혹은 Merge 를 선택한다.
    4. source-to-target account 를 위해 line number 를 입력한다.
    5. LOV 에서 source Account 를 선택하여 입력한다.
    모든 Account 는 enable 상태여야 한다.
    6. target account 역시 LOV에서 선택하여 입력한다.
    7. 지정한 작업을 수행 하기 전에 먼저 확인 작업을 할 수도 있다.
    8. 작업한 내용을 저장한다.
    9. Move/Merge request 를 수행한다.
    Example
    N/A
    Reference Documents
    Note. 146050.1 - How to Transfer Historical Data from One Account to Another

    Follow the directions here:
    http://support.apple.com/kb/HT2109

Maybe you are looking for