How to call a Game in ABAP Control
I want to place / call game in Control, which controls are required?
pls guide..
Dont spam the forum with duplicate threads. Please read the forum rules before posting
Similar Messages
-
How to call java program from ABAP
Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm -
How to call subroutines defined in ABAP program with type S
how to call subroutines defined in ABAP program with type S? can you give an example?
Normal executable program,
REPORT ZTEST_MAIN.
perform sub1 in program ztest_sub.
"you can call using in program addition
Subroutine pool program
PROGRAM ZTEST_SUB.
form sub1.
endform. -
How to call a idoc in abap program and updates catsdb table
how to call a idoc in abap program and updates catsdb table
thank you,
Jagrut BharatKumar ShuklaHi Kishan,
You can refer to following help document,
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
Regards,
Meera -
How to call BAPI in a ABAP prog
Hi All
I have a concern regarding the usuage of BAPI in the ABAP program.
i have successfully created a BAPI and i have implemented a method as well using ADD API Method button.
Now after doin all the things in SWO1.
I wanted to know how to call this BAPI method in se38.
CAn anyone throw some light on this ?
Regards
GauravHi,
try this
*& Report ZKAR_MATMAS_BAPI
*& This program demonstrates how easy it is to create Material master
*& data using BAPI_MATERIAL_SAVEDATA
*& The program also generates a report post-execution displaying errors
*& as well as successful uploads
REPORT ZKAR_MATMAS_BAPI.
* TABLES
* FLAGS *
DATA: F_STOP. " Flag used to stop processing
* DATA DECLARATIONS *
DATA : V_EMPTY TYPE I, " No. of empty records
V_TOTAL TYPE I. " Total no. of records.
* STRUCTURES & INTERNAL TABLES
*BAPI structures
DATA: BAPI_HEAD LIKE BAPIMATHEAD, " Header Segment with Control Information
BAPI_MAKT LIKE BAPI_MAKT, " Material Description
BAPI_MARA1 LIKE BAPI_MARA, " Client Data
BAPI_MARAX LIKE BAPI_MARAX, " Checkbox Structure for BAPI_MARA
BAPI_MARC1 LIKE BAPI_MARC, " Plant View
BAPI_MARCX LIKE BAPI_MARCX, " Checkbox Structure for BAPI_MARC
BAPI_MBEW1 LIKE BAPI_MBEW, " Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX, " Checkbox Structure for BAPI_MBEW
BAPI_RETURN LIKE BAPIRET2. " Return Parameter
*--- Internal table to hold excel file data
DATA: IT_INTERN TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*--- Internal table to hold Matetrial descriptions
DATA: BEGIN OF IT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF IT_MAKT.
*--- Internal to hold the records in the text file
DATA : BEGIN OF IT_DATA OCCURS 100,
WERKS(4), " Plant
MTART(4), " Material type
MATNR(18), " Material number
MATKL(9) , " Material group
MBRSH(1), " Industry sector
MEINS(3), " Base unit of measure
GEWEI(3), " Weight Unit
SPART(2), " Division
EKGRP(3), " Purchasing group
VPRSV(1), " Price control indicator
STPRS(12), " Standard price
PEINH(3), " Price unit
SPRAS(2), " Language key
MAKTX(40), " Material description
END OF IT_DATA.
* SELECTION SCREEN. *
SELECTION-SCREEN BEGIN OF BLOCK SCR1 WITH FRAME TITLE TEXT-111.
PARAMETER : P_FILE TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT " Input File
'C:\Material_master.XLS'.
PARAMETER : P_MAX(4) OBLIGATORY DEFAULT '100'. " no.of recs in a session
PARAMETERS: P_HEADER TYPE I DEFAULT 0. " Header Lines
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK SCR1.
* AT SELECTION-SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*--- Validating file
PERFORM VALIDATE_FILE USING P_FILE.
* START-OF-SELECTION
START-OF-SELECTION.
*--- Perform to convert the Excel data into an internal table
PERFORM CONVERT_XLS_ITAB.
IF NOT IT_DATA[] IS INITIAL.
*--- Perform to delete Header lines
PERFORM DELETE_HEADER_EMPTY_RECS.
ENDIF.
* END OF SELECTION. *
END-OF-SELECTION.
*--- Perform to upload Material Master data
PERFORM UPLOAD_MATMAS.
* Form : validate_input_file
* Description : To provide F4 help for file if read from PC
FORM VALIDATE_FILE USING F_FILE TYPE RLGRAP-FILENAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
FILE_NAME = F_FILE
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE S010(ZLKPL_MSGCLASS). " 'Error in getting filename'.
ENDIF.
ENDFORM. " validate_input_file
*& Form CONVER_XLS_ITAB
* text
FORM CONVERT_XLS_ITAB.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FILE
I_BEGIN_COL = P_BEGCOL
I_BEGIN_ROW = P_BEGROW
I_END_COL = P_ENDCOL
I_END_ROW = P_ENDROW
TABLES
INTERN = IT_INTERN.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--- Perform to move the data into an internal data
PERFORM MOVE_DATA.
ENDFORM. " CONVERT_XLS_ITAB
*& Form MOVE_DATA
* text
FORM MOVE_DATA.
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_INTERN BY ROW COL.
CLEAR IT_INTERN.
LOOP AT IT_INTERN.
MOVE IT_INTERN-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE IT_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_INTERN-VALUE TO <FS>.
AT END OF ROW.
APPEND IT_DATA.
CLEAR IT_DATA.
ENDAT.
ENDLOOP.
ENDFORM. " MOVE_DATA
*& Form DELETE_HEADER_EMPTY_RECS
* To delete the Header and empty records
FORM DELETE_HEADER_EMPTY_RECS.
DATA: LV_TABIX LIKE SY-TABIX.
IF NOT P_HEADER IS INITIAL.
LOOP AT IT_DATA.
IF P_HEADER > 0 AND NOT IT_DATA IS INITIAL.
DELETE IT_DATA FROM 1 TO P_HEADER.
* P_HEADER = 0.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR IT_DATA.
*--- To delete the empty lines from internal table
LOOP AT IT_DATA.
LV_TABIX = SY-TABIX.
IF IT_DATA IS INITIAL.
V_EMPTY = V_EMPTY + 1.
DELETE IT_DATA INDEX LV_TABIX..
ENDIF.
ENDLOOP.
CLEAR IT_DATA.
*--- Total no of recs in file
DESCRIBE TABLE IT_DATA LINES V_TOTAL.
IF V_TOTAL = 0.
MESSAGE I013(ZLKPL_MSGCLASS). " No records in the file
F_STOP = 'X'.
STOP.
ENDIF.
ENDFORM. " DELETE_HEADER_EMPTY_RECS
*& Form UPLOAD_MATMAS
* to upload Material Master data
FORM UPLOAD_MATMAS .
LOOP AT IT_DATA.
* Header
UNPACK IT_DATA-MATNR TO IT_DATA-MATNR.
BAPI_HEAD-MATERIAL = IT_DATA-MATNR.
BAPI_HEAD-IND_SECTOR = IT_DATA-MBRSH.
BAPI_HEAD-MATL_TYPE = IT_DATA-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
* Material Description
REFRESH IT_MAKT.
IT_MAKT-LANGU = IT_DATA-SPRAS.
IT_MAKT-MATL_DESC = IT_DATA-MAKTX.
APPEND IT_MAKT.
* Client Data - Basic
BAPI_MARA1-MATL_GROUP = IT_DATA-MATKL.
BAPI_MARA1-BASE_UOM = IT_DATA-MEINS.
BAPI_MARA1-UNIT_OF_WT = IT_DATA-GEWEI.
BAPI_MARA1-DIVISION = IT_DATA-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
* Plant - Purchasing
BAPI_MARC1-PLANT = IT_DATA-WERKS.
BAPI_MARC1-PUR_GROUP = IT_DATA-EKGRP.
BAPI_MARCX-PLANT = IT_DATA-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
* Accounting
BAPI_MBEW1-VAL_AREA = IT_DATA-WERKS.
BAPI_MBEW1-PRICE_CTRL = IT_DATA-VPRSV.
BAPI_MBEW1-STD_PRICE = IT_DATA-STPRS.
BAPI_MBEW1-PRICE_UNIT = IT_DATA-PEINH.
BAPI_MBEWX-VAL_AREA = IT_DATA-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
*--- BAPI to create material
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
* VALUATIONDATA = BAPI_MBEW1
* VALUATIONDATAX = BAPI_MBEWX
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA = BAPI_MVKE1
* SALESDATAX = BAPI_MVKEX
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = IT_MAKT
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
* RETURNMESSAGES =
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error:' ,BAPI_RETURN-MESSAGE ,'for material:' ,IT_DATA-MATNR.
ELSEIF BAPI_RETURN-TYPE = 'S'.
WRITE: 'Successfully created material' ,IT_DATA-MATNR.
ENDIF.
ENDLOOP.
ENDFORM. " UPLOAD_MATMAS
Regards,
V.Balaji
Reward if Usefull... -
How to call the webservice in abap program
Hi All,
I have created a web service for my RFC . The RFC has Import and export paramaters.
I want call the same web service into my ABAP REPORT and at the same time i want pass the values to webservice and get the result from webservice in my abap report,
Please help me how to call the web service and pass the values and get the values?
Highly appreciate your assitance.
Thanks,
KishanHi Kishan,
You can refer to following help document,
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
Regards,
Meera -
How to call translation template from bursting control file.
Hi All,
Greetings!!!!!!!!!!!!!
Need help on calling translation template from the bursting control file.
While calling the translation template from bursting control file it ends in error. Following is the error
[063010_063059160][][EXCEPTION] The URL ( xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true ) is invalid.
But same control file is working for standard tempalte.
Here is the sample control file.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXXPRPOLXML/LIST_G_MANUAL_PO_NUM_TYPE/G_MANUAL_PO_NUM_TYPE/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email id="123" server="nasmtp.us.XXX.com" port="25" from="${C_ORIGINAL_BUYER_EMAIL}" reply-to ="">
<xapi:message id="123" to="${C_VENDOR_CONTACT_EMAIL}" cc="" bcc=""
attachment="true"
subject="Purchase Order ${POH_PO_NUM} revision ${POH_REVISION_NUM} from XXX">
${POH_VENDOR_CONTACT_NAME},
${C_MAIL_SUBJECT}
PO number ${POH_PO_NUM} revision ${POH_REVISION_NUM}
Please reply to ${C_ORIGINAL_BUYER_EMAIL} - ${POH_ORG_ID}
Thank you,
${POH_BUYER}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${POH_PO_NUM}-rev${POH_REVISION_NUM}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.en.US/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !=''and POH_ORG_ID = 54]"></xapi:template>
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Please let me know how to call a translation template from bursting.
Thanks
RajeshGot the solution...
This is how we have to call a translation template from bursting file.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXXPRPOLXML/LIST_G_MANUAL_PO_NUM_TYPE/G_MANUAL_PO_NUM_TYPE/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email id="123" server="nasmtp.us.XXX.com" port="25" from="${C_ORIGINAL_BUYER_EMAIL}" reply-to ="">
<xapi:message id="123" to="${C_VENDOR_CONTACT_EMAIL}" cc="" bcc=""
attachment="true"
subject="Purchase Order ${POH_PO_NUM} revision ${POH_REVISION_NUM} from XXX">
${POH_VENDOR_CONTACT_NAME},
${C_MAIL_SUBJECT}
PO number ${POH_PO_NUM} revision ${POH_REVISION_NUM}
Please reply to ${C_ORIGINAL_BUYER_EMAIL} - ${POH_ORG_ID}
Thank you,
${POH_BUYER}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${POH_PO_NUM}-rev${POH_REVISION_NUM}" output-type="pdf" delivery="123">
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL.fr.CA" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161 and CLANGUAGE2 = 'fr']"></xapi:template>
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.en.US/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 54 or POH_ORG_ID = 56 or (POH_ORG_ID = 161 and CLANGUAGE2 = 'en')]"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
where
XXX - Application shortname
XXXPOXPRPOL - Template Code
Hope this helps!!!!!!!!!!!!!!!!!!!!!
Regards
Rajesh -
How to call an web dynpro abap application with an particular theme
Dear friends,
i have created one web dynpro abap application. i created one theme XYZ in portal with required font size. when i applied this theme on portal all web dynpro application use this theme.
i want to use current theme for one application not for all.
is it poosible to call an web dynpro abap appl with the particular theme where as others should not be temper with this theme.
please guide me by some useful steps.
regards
sunilSunil,
Check if this helps.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7015b1f9-535c-2910-c8b7-e681fe75aaf8?QuickLink=index&overridelayout=true
Cheers!
Sandeep Tudumu -
How to call a transaction from ABAP code
Hi everybody,
How do I run a transaction from my ABAP code?
For example, through my ABAP code, I want to call the ME24 transaction (Maintain Purchase Order).
Thanks for the help,
RoyCALL TRANSACTION
Syntax
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
| [USING bdc_tab [bdc_options]] }.
Extras:
1. ... AND SKIP FIRST SCREEN
2. ... USING bdc_tab [bdc_options]
Effect
The statement CALL TRANSACTION calls the transaction whose transaction code is contained in data object ta. The data object ta must be of character type and must contain the transaction code in uppercase letters. If the transaction specified in ta cannot be found, an untreatable exception is triggered. The additions suppress the display of the initial screen and allow you to execute the transaction using a batch input session.
At CALL TRANSACTION the calling program and its data is kept, and after exiting the called transaction, processing is resumed in the calling program after the call.
When the transaction is called, the ABAP program linked with the transaction code is loaded in a new internal session. The session of the calling program is kept. The called program runs in an SAP LUW of its own.
If the called transaction is a dialog transaction, after loading the ABAP program the event LOAD-OF-PROGRAM is triggered and the dynpro defined as initial dynpro of the transaction is called. The initial dynpro is the first dynpro of a dynpro sequence. The transaction is finished when the dynpro sequence is ended by encountering the next dynpro with dynpro number 0 or when the program is exited with the LEAVE PROGRAM statement.
If the called transaction is an OO transaction (as of release 6.10), when loading all programs except class pools the event LOAD-OF-PROGRAM is triggered and then the method linked with the transaction code is called. If the method is an instance method, implicitly an object of the corresponding class is generated and referenced by the runtime environment. The transaction is finished when the method is finished or when the program is exited using the LEAVE PROGRAM statement.
After the end of the transaction call, program execution of the calling program resumes after the CALL TRANSACTION statement.
Note
At the statement CALL TRANSACTION, the authorization of the current user to execute the called transaction is not checked automatically. If the calling program does not execute a check, the called program must check the authorization. To do this, the called program must call function module AUTHORITY_CHECK_TCODE.
Addition 1
... AND SKIP FIRST SCREEN
Effect
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.
Example
If the static next dynpro of the initial dynpro of the called dialog transaction FLIGHT_TA is not the initial dynpro itself, its screen is suppressed, because its input fields are filled using the SPA/GPA parameters CAR and CON.
DATA: carrid TYPE spfli-carrid,
connid TYPE spfli-connid.
SET PARAMETER ID: 'CAR' FIELD carrid,
'CON' FIELD connid.
CALL TRANSACTION 'FLIGHT_TA' AND SKIP FIRST SCREEN.
Addition 2
... USING bdc_tab [bdc_options]
Effect
Use this addition to pass an internal table bdc_tab of row type BDCDATA from the ABAP Dictionary to a dialog transaction. The additions bdc_options control the batch input processing. When a transaction with addition USING is called, the system field sy-binpt is set to value "X" in the called program - while this transaction is running, no other transaction can be called with this addition.
The internal table bdc_tab is the program-internal representation of a batch input session and must be filled accordingly. The structure BDCDATA has the components shown in the table below.
Component Description
PROGRAM Name of the program of the called transaction
DYNPRO Number of the dynpro to be processed
DYNBEGIN Flag for the beginning of a new dynpro (possible values are "X" and " ")
FNAM Name of a dynpro field to be filled or batch input control statement, for example, to position the cursor
FVAL Value to be passed to the dynpro field or to the control statement
Using the internal table bdc_tab, you can provide any number of screens of the called transaction with input and user actions.
System Fields
sy-subrc Description
0 The batch input processing of the called transaction was successful.
< 1000 Error in the called transaction. If within the transaction a message was sent, you can receive it using the addition MESSAGES.
1001 Error in batch input processing.
Note
Outside of ABAP Objects you can specify the additions AND SKIP FIRST SCREEN and USING together. However, this does not make sense, because the addition AND SKIP FIRST SCREEN is desigend only to fill the mandatory input fields using SPA/GPA parameters, while the batch input table specified with USING controls the entire transaction flow including the display of the screens.
Example
Call of the Class Builder (transaction SE24) and display of class CL_SPFLI_PERSISTENT. The internal table bdcdata_tab contains the input for the batch input processing of the first dynpro (1000) of the transaction. Using structure opt, the batch input processing is set to suppress the first screen and to display the next screen in the standard size.
DATA class_name(30) TYPE c VALUE 'CL_SPFLI_PERSISTENT'.
DATA: bdcdata_wa TYPE bdcdata,
bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSEOD'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'SEOCLASS-CLSNAME'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'SEOCLASS-CLSNAME'.
bdcdata_wa-fval = class_name.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=CIDI'.
APPEND bdcdata_wa TO bdcdata_tab.
opt-dismode = 'E'.
opt-defsize = 'X'.
CALL TRANSACTION 'SE24' USING bdcdata_tab OPTIONS FROM opt. -
How to call C++ Program in Abap
Hi Friends,
How can i call a C/C++ Program or a Function in an Abap Program.or an Abap Module or Bapi in a C/C++ Program.
Regards,
Gowtham Kuchipudi.Let's talk about ABAP -> C/C++
You already have C functions being called in ABAP ! It is the C functions from the SAP Kernel.
There are several approaches to your problem :
- one could be to simply execute the program from the Shell (Unix or the Windows command)
- antoher would be add the function to the SAP Kernel (which is a bit of a job since you have to recompile the Kernel)
Regarding C/C++ -> ABAP, I am sure there are a lot of examples around like for the other languages (VB, Java, ...).
Hope it helps.
Cheers,
Message was edited by: Guillaume Garcia -
How to Call HANA Procedure in ABAP
Hi Everyone,
I am new to ABAP
I have created a procedure in HANA that accepts two input parameters and outputs a table
I am using HANA as a Secondary Database
How can I call this procedure in my ABAP program?
Regards,
VivekHi Vivek,
depends on how you would like to call it :-)
1. Use native SQL to call the procedure (see report ADBC_DEMO_PROC_CALLS_HDB; available in any system with a minimum NetWeaver release 7.40 SP5).
2. Create a DB Procedure Proxy and call the DB Procedure Proxy (Tutorial: How to consume SAP HANA Procedures in ABAP; only "directly" available if HANA is the primary DB underlying your system, for secondary DB system see discussion Execute Procedure with input parameters as table from ABAP).
3. (Method of choice available as of NetWeaver 7.4 SP5): Create an ABAP managed DB procedure (instead of the native HANA procedure) as described in ABAP Managed Database Procedures - Introduction
Cheers,
Jasmin -
How to call a webservice in ABAP?
Hi,
I want to call an external webservice in ABAP coding. Do you know how to write or configue it? Is there any documentation?
Thanks!check out this weblog
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Raja
PS: please search before posting a question -
How to call transaction in an abap program
how do we open a transaction thru an abap program and pass a parameter to it
Use call transaction. You can fill up the parameters in the BDC internal table
DATA: bdc_tab LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
CONSTANTS: c_tcode LIKE t130m-tcode VALUE 'FB01'. "Tcode you want to call
CALL TRANSACTION c_tcode
USING bdc_tab
MODE 'N'
UPDATE 'S'
MESSAGES INTO messtab.
Error message will be captured in the messtab.
You can goto the SAP help on Call transaction to see all the details and options.
<b><REMOVED BY MODERATOR></b>
Thanks.
Message was edited by:
Alvaro Tejada Galindo -
How to call UME API from ABAP?
Hello all,
I want to call the UME API using ABAP to change portal users from backend system.
Is this possible without JAVA development? How?
Thanks for your help,
Regards,
Guido KnappHi,
Refer this link you wil get some idea
http://help.sap.com/saphelp_nw04/helpdata/en/e0/3820a37edeec45a91dd6e45fba15b8/frameset.htm
Regards,
Senthil K. -
How to call HR Macros in ABAP-Webdynpro
HI all,
I want to extract HR data in webdynpro view.
Where should I give Logical Database PNP?
The ifnotypes key word is not accepting in Webdynpro coding?
Where should I give GET PERNR event in Webdynpro?
When I use RP_PROVIDE_FROM_LAST .... says error message
Statement "RP_PROVIDE_FROM_LAST" is not defined. Check your spelling .
How to use the Macros in Webdynpro (VIEW) methods.
First time I'm working in ABAP-HR Webynpro.
Please help me out..
Thanks,
PrasadHi,
How did u solve this? pls provide the solution.
Regards,
Lakshmi.
Maybe you are looking for
-
One of 100 records in file has error. How to reprocess only one record??
Hi All I have a scenario where, i receive data in a file, and we create invoices in SAP system from the data records in the file. My file contains 100 records and if there is an error in processing record number 43, how XI can be set up to restart wh
-
Hi all, We are trying to test RNIF adapter by sending message from XI QA via RNIF adapter (Receiver) to XI DEV via RNIF adapter (Sender). In sxmb_moni (QA) the message is ok, but in RWB (Adapter engine monitoring) the message appears with an error: T
-
Approved SHC not appearing in carry out sourcing
HI SRM Gurus, In SRM Web, after the creation and apporval of shopping cart, the buyer checked the items in carry out sourcing (professional purchaser- Sourcing- carry out sourcing). In find tab, seacrh using extended seacrh and then filling out the s
-
URGENT: CR2011 Unable to see Linked Tables (Viewing Links)
In select expert tables are listed but when clicking on the links tab the tables do not appear. This occurs on tables created in CR2010 (with links appearing) and opened in 2011 AND with new reports created in 2011. Service Pak download did not fix
-
No work item found for workflow WS14000109 Urgent
Hi, I am using Extended classic scenario, I have created a PO in SRM having a PO value of 100000 INR and the work flow which is triggered is WS14000109 i.e. spending limit worlflow. My approval limit is 25000 INR and I have three approver Approver A