How to call a method by specific IP address(if the system has 2 IP address)
Hi All,
In my project I have two N220 systems, which has two IP addresses each. Server has the following IP addresses
172.31.128.93 This IP address connected thorugh HUB
3.3.3.1 This IP address connected through Crossover cable
Client has the following IP addresses
172.31.128.94 This IP address connected thorugh HUB
3.3.3.2 This IP address connected through Crossover cable
In server system I bind the RMI registry in the following way
Naming.rebind ("rmi://3.3.3.1/HeartBeat", this);
And in Client system I lookup in the following way
Naming.lookup("rmi://3.3.3.1:1099/HeartBeat");
Now the problem is, the method in RMI server is not called through Crossover link it is happening through TCP/IP link. Is there any way to call the method by only using Crossover link?
Please help me with this issue...
Thanks in advance.
Hi all,
In solaris 220 machine i am facing the following problem While executing lookup method.
If the crossover cable is properly connected lookup method is working fine.
If the crossover cable is unplugged, lookup method is waiting indefinitely until the cable is plugged in. (Lookup method is not throwing any exception )
Is there any way to avoid this ?
Please help me with this issue..
Thanks in advance...
Message was edited by:
rmi_rajkumar
Similar Messages
-
How to call a method of an other view in the current view
Hi Guys,
I have 2 views in my Project: IPrivateValidateIncidentView and IPrivateRoadMapView. Now, a button in the IPrivateRoadMapView must call a method in the IPrivateValidateIncidentView. I cannot seem to figgure this out. I know that I will probably need to arrange things centrally in my Component COntroller somehow.
I have tried to see what methods I can Invoke on IPrivateValidateIncidentView from within the Controller to see if I can call the method OnActionDoneValidate() from there, but I can only seem to get a constant with this methods name: IPrivateValidateIncidentView.WD_EVENTHANDLER_ON_ACTION_DONE_VALIDATION;
Please help.
ChristiaanHi,
You are correct, for your requirement you need to arrange the things centrally that is in Component Controller. As in above reply you need to Create your context in Component controller and then map them to both the views. So data will be available to both the views and finally you create a method in component controller and call that method from second view. So the data changes made in controller will be reflected on First View as they have context mapping.
Regards
Raghu -
How to call a method of a base class if the base class is abstract...
This is my sample code>>>>
abstract class b {
public void display() {
System.out.println("I am in Base Class");
class test extends b {
public static void main(String[] args) {
test obj = new test();
obj.display();
public void display() {
System.out.println("I am in Derived Class");
I want to call base class version of display with derived class object.........is it possible....* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
* headdesk *
Enough with the friggin' zombie threads already! -
How is call web method in application?.
Hi,
I have created java web application(Web Service).
I want to call the setName() method in java application(GUI).
how is call web method in application?.
package sv;
import javax.jws.WebMethod;
import javax.jws.WebParam;
import javax.jws.WebService;
@WebService()
public class MyService {
@WebMethod(operationName = "setName")
public String setName(@WebParam(name = "name")
String name) {
return "my string is "+ name;
}The model layer should never depend on a specific view layer - this breaks reusability.
What you need to do is expose a service method on your AM. Then your view can call this method and pass a parameter into the model layer. -
How to call a method in private section of a class in the public section
Hi Everybody,
i have written a method(meth1) in the private section of a class(C1).
it is as follows
class C1 definition.
private section.
methods: meth1 importing im_dt1 like tp1
im_dt2 like tp2
im_dt3 like tp3
im_dt4 like tp4
returning value(re_dt1) like tp5.
endclass.
i have the final data that has to be displayed in internal table re_dt1.
now my question is how to call this method present in private section into public section and display the data present in re_dt1.
Thanks,
learning.abap.Hi,
what you need is one public method being called at start-of-selection. Within this the private methods have to be called.
The question is, why has the method for reading the database tables to be private? If you have only one private method reading all database tables the public method being called at start-of-selection will only consist of a call-method statement.
This seems to be one call to much.
The logic for reading the different database tables is hidden inside the class anyway.
Is there any further logic reading the different database tables?
Have always all table to be read? If not another approach would be one private method for each database table being called by a public method deciding which table has to be read:
public section.
methods get_data returning value(re_Dt1).
private section.
methods:
get_table_a returning value(im_dt1),
get_table_b returning value(im_dt2),
get_table_c returning value(im_dt3),
get_table_d returning value(im_dt4),
combine_data importing im_dt1
im_dt2
im_dt3
im_dt4
returning value(re_dt1).
*- implementation of public method:
method get_data.
data: lt_dt1 ...
lt_dt2,
lt_dt3,
lt_dt4.
* here decide which tables have to be read:
lt_dt1 = get_table_a( ).
lt_dt2 = get_table_b( ).
lt_dt3 = get_table_c( ).
lt_dt4 = get_table_d( ).
re_dt1 = combine_data( i_dt1 = lt_dt1
i_dt2 = lt_dt2
i_dt3 = lt_dt3
i_dt4 = lt_dt4 ).
endmethod.
*- implementation of private methods
method get_table_a.
endmethod.
method get_table_b.
endmethod.
method get_table_c.
endmethod.
method get_table_d.
endmethod.
method combine_data.
endmethod.
Regards
Dirk -
How to call a Method in a Program?
Hello,
I am very new to the ABAP world. I have been given a task to call a method if_hrbas_plain_infotype_access~read_single from the class CL_HRBAS_PLAIN_INFOTYPE_ACCESS in a program to see if we can use it to display some employee information. I don't know how to call a method in a program. Can somebody please provide me some pseudo code or instructions?
Thanks.Hi Shan,
here is the code to call a method. while calling the method Instance as 'r_info' which is the type reference to class as specified.
pass the values to exporting parameters plvar,otype,objid...etc according to the requirement
infotypes: 0002. " creates an internal table p0002.
data:
r_info type ref to CL_HRBAS_PLAIN_INFOTYPE_ACCESS.
TRY.
CALL METHOD r_info->if_hrbas_plain_infotype_access~read
EXPORTING
plvar =
otype =
objid =
istat =
infty =
* SUBTY =
begda =
endda =
no_auth_check = 'X'
message_handler =
IMPORTING
PNNNN_TAB = P0002
* HRTNNNN_TAB =
* IS_OK =
CATCH CX_HRBAS_VIOLATED_ASSERTION .
ENDTRY.
LOOP AT P0002.
WRITE:/
P0002-VORNA,
P0002-NCHMC,
P0002-NACHN.
ENDLOOP.
Regards -
How to call a method from a separate class using IBAction
I can't work out how to call a method form an external class with IBAction.
//This Works 1
-(void)addCard:(MyiCards *)card{
[card insertNewCardIntoDatabase];
//This works 2
-(IBAction) addNewCard:(id)sender{
//stuff -- I want to call [card insertNewCardIntoDatabase];
I have tried tons of stuff here, but nothing is working. When i build this I get no errors or warnings, but trying to call the method in anyway other that what is there, i get errors.Can you explain more about what you are trying to do? IBAction is just a 'hint' to Interface Builder. It's just a void method return. And it's unclear what method is where from your code snippet below. is addNewCard: in another class? And if so, does it have a reference to the 'card' object you are sending the 'insertNewCardIntoDatabase' message? Some more details would help.
Cheers,
George -
How to call a method defined in AM when I select any value in LOV
Lets say there is a LOV. The scenario is as soon as I select any value in LOV, a method needs to be called which I have written in the AM. And the output of the method is displayed in a output text box.
I am not able to understand how to call a method when the user selects any value in LOV.
This is wht I did. I had created the binding for the method. Changed the autosubmit property of the LOV to True, and in the properties of the output box, in the partial submit trigger property, passed the ID of the LOV. But I didnt get any place where I need to call the method. I am also not able to drop an action listener on the LOVHi,
+"its showing an error(underlined in orange)."+
Any reason you don't share this error with us? Anyway, here is how it goes
1. LOV, set autosubmit="true" and configure a value change listener
2. Expose the AM method as a method binding in the PageDef file
3. In the value change listener:
BindingContext bctx = BindingContxt().getCurrent();
BindingContainer bindings = bctx.getCurrentBindingsEntry();
OperationBinding method = (OperationBinding) bindings.get("name of method binding in PageDef");
method.getParamsMap().put("argument name1", value1);
method.getParamsMap().put("argument name2", value2);
Object retVal = method.execute();
if(!method.getErrors().isEmpty()){
//handle errors
else{
//write retVal to the managed bean variable that is referenced by the outputText value property
//PPR output text component
ADFFacesContext.getCurrentInstance().addPartialTarget(outputTextRef);
}Note that you may have to set clientComponent = "true" on the output text component
Frank -
How to call a method in bean from application module Impl?
i have to call a method which is in a bean from AppmoduleImpl class. Is it possible ?
The model layer should never depend on a specific view layer - this breaks reusability.
What you need to do is expose a service method on your AM. Then your view can call this method and pass a parameter into the model layer. -
How to call a method in the servlet from an applet
I want to get the data for the applet from the servlet.
How to call a method that exits in the servlet from the applet? I want to use http protocol to do this.
Any suggestions? Please help.
thanksNow that Web Services is around, I'd look at possibly implement a Web Service call in your applet, which can then be given back any object(s) on return. Set up your server side to handle Web Service calls. In this way, you can break the applet out into an application should you want to (with very little work) and it will still function the same
-
How to call main method in one class from another class
Suppose i have a code like this
class Demo
public static void main(String args[])
System.out.println("We are in First class");
class Demo1
public static void main(String args[])
System.out.println("We are in second class");
In the above program how to call main method in demo calss from Demo1 class......???????No, i dont know how to call other than main methods from other classes
And one more doubt i have i.e. Like in C can we see the execution of the program like how the code is being compiled step by step and how the value of the variable changes from step to step like(Add Watch)......... -
How to call a method of another class ?
Hello,
I�d like to know how to call a method of another class. I have to classes (class 1 and class 2), class 1 instantiates an object of class 2 and executes the rest of the method. Later, class 1 has to call a method of class 2, sending a message to do something in the object... Does anybody know how to do that ? Do I have to use interface ? Could you please help me ?
Thanks.
Bruno.Hi Schiller,
The codes are the following:
COMECO
import javax.swing.UIManager;
import java.awt.*;
import java.net.*;
import java.io.*;
import java.awt.event.*;
import javax.swing.*;
//Main method
class comeco {
public static void main(String[] args) {
try {
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
catch(Exception e) {
AGORA testeagora=new AGORA();
// Code for socket
int port;
ServerSocket server_socket;
BufferedReader input;
try {
port = Integer.parseInt(args[0]);
catch (Exception e) {
System.out.println("comeco ---> port = 1500 (default)");
port = 1500;
try {
server_socket = new ServerSocket(port);
System.out.println("comeco ---> Server waiting for client on port " +
server_socket.getLocalPort());
// server infinite loop
while(true) {
Socket socket = server_socket.accept();
System.out.println("comeco ---> New connection accepted " +
socket.getInetAddress() +
":" + socket.getPort());
input = new BufferedReader(new InputStreamReader(socket.getInputStream()));
// print received data
try {
while(true) {
String message = input.readLine();
if (message==null) break;
System.out.println("comeco ---> " + message);
testeagora.teste(message);
catch (IOException e) {
System.out.println(e);
// connection closed by client
try {
socket.close();
System.out.println("Connection closed by client");
catch (IOException e) {
System.out.println(e);
catch (IOException e) {
System.out.println(e);
AGORA
import javax.swing.UIManager;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.io.*;
import javax.swing.*;
import java.net.*;
//public class AGORA {
public class AGORA {
boolean packFrame = false;
//Construct the application
public AGORA() {
try {
Main frame = new Main();
System.out.println("agora ---> Criou o frame");
//Validate frames that have preset sizes
//Pack frames that have useful preferred size info, e.g. from their layout
if (packFrame)
frame.pack();
else
frame.validate();
//Center the window
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
Dimension frameSize = frame.getSize();
if (frameSize.height > screenSize.height)
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width)
frameSize.width = screenSize.width;
frame.setLocation((screenSize.width - frameSize.width) / 2, (screenSize.height - frameSize.height) / 2);
frame.setVisible(true);
catch(Exception e)
{ System.out.println("agora ---> " +e);
// Tem que criar a THREAD e ver se funciona
public void remontar (final String msg) {
try {
System.out.println("agora ---> Passou pelo Runnable");
System.out.println("agora --> Mensagem que veio do comeco para agora: "+ msg);
Main.acao(msg);
catch(Exception x) {
x.printStackTrace();
MAIN
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import com.borland.jbcl.layout.*;
import javax.swing.border.*;
import java.net.*;
import java.io.*;
public class Main extends JFrame {
// ALL THE CODE OF THE INTERFACE
//Construct the frame
public Main() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
public void acao() {
// C�digo para mudar a interface
Runnable setTextRun=new Runnable() {
public void run() {
try {
System.out.println("main ---> Passou pelo Runnable");
TStatus.setText("main ---> Funcionou");
catch(Exception x) {
x.printStackTrace();
System.out.println("main ---> About to invokelater");
SwingUtilities.invokeLater(setTextRun);
System.out.println("main ---> Back from invokelater");
// Aqui vai entrar o m�todo para ouvir as portas sockets.
// Ele deve ouvir e caso haja alguma nova mensagem, trat�-la para
// alterar as vari�veis e redesenhar os pain�is
// Al�m disso, o bot�o de refresh deve aparecer ativo em vermelho
//Component initialization
private void jbInit() throws Exception {
// Initialize the interface
//Setting | Host action performed
public void SetHost_actionPerformed(ActionEvent e) {
int port;
ServerSocket server_socket;
BufferedReader input;
System.out.println("main ---> port = 1500 (default)");
port = 1500;
try {
server_socket = new ServerSocket(port);
System.out.println("main ---> Server waiting for client on port " +
server_socket.getLocalPort());
// server infinite loop
while(true) {
Socket socket = server_socket.accept();
System.out.println("main ---> New connection accepted " +
socket.getInetAddress() +
":" + socket.getPort());
input = new BufferedReader(new InputStreamReader(socket.getInputStream()));
String espaco=new String(": ");
JLabel teste2=new JLabel(new ImageIcon("host.gif"));
PHost.add(teste2);
System.out.println("main ---> Adicionou host na interface");
repaint();
System.out.println("main ---> Redesenhou a interface");
setVisible(true);
// print received data
try {
while(true) {
String message = input.readLine();
if (message==null) break;
System.out.println("main ---> " + message);
catch (IOException e2) {
System.out.println(e2);
// connection closed by client
try {
socket.close();
System.out.println("main ---> Connection closed by client");
catch (IOException e3) {
System.out.println(e3);
catch (IOException e1) {
System.out.println(e1);
public void OutHost_actionPerformed(ActionEvent e) {
repaint();
setVisible(true);
//Help | About action performed
public void helpAbout_actionPerformed(ActionEvent e) {
Main_AboutBox dlg = new Main_AboutBox(this);
Dimension dlgSize = dlg.getPreferredSize();
Dimension frmSize = getSize();
Point loc = getLocation();
dlg.setLocation((frmSize.width - dlgSize.width) / 2 + loc.x, (frmSize.height - dlgSize.height) / 2 + loc.y);
dlg.setModal(true);
dlg.show();
//Overridden so we can exit on System Close
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if(e.getID() == WindowEvent.WINDOW_CLOSING) {
fileExit_actionPerformed(null);
public void result(final String msg) {
// C�digo para mudar a interface
Runnable setTextRun=new Runnable() {
public void run() {
try {
System.out.println("main ---> Chamou o m�todo result para mudar a interface");
System.out.println("main --> Mensagem que veio do agora para main: "+ msg);
TStatus.setText(msg);
catch(Exception x) {
x.printStackTrace();
System.out.println("main --> About to invokelater");
SwingUtilities.invokeLater(setTextRun);
System.out.println("main --> Back from invokelater");
[]�s. -
How to call a method of one view in other view
Hi
could any one suggest "how to call a method of one view in other view "
thanks
kaushikHi Kausic,
Its not possible to call a method from view to View.
Since view is private entity we can not pass the data directly.
I suggest you to declare the method in Component/Custom controller and call.
the code is,
wdThis.wdGet<Component/Custom Name>Controller().<methodName>();
Regards,
<b>Ramganesan K</b> -
How to call a method in onload using jsf
Hi
i have task where i neeed to retrive datas from database on page onload . i have written retriving code in backing bean but how to call that
method on onload in jsf.......
Can anybody help ???????????
thankspublic class firstbean{
list mylist = new ArrayList();
firstbean(){
new firstcontroller().retriveData()
public class firstcontroller{
public void retriveData(){
// I need to get first bean object reference to assign the retived data to my list variable(mylist)
// but iam getting first bean object object as nulll
Object object =
FacesContext
.getCurrentInstance()
.getExternalContext()
.getSessionMap()
.get("FirstBean");
FirstBean firstBean = (FirstBean)object;
// firstBean = null its coming
firstBean.mylist = new FirstDao().getdata();
this is my code how to implement the onload function in this login . here when i try accesss my first bean reference is showing as null . so aim not able to assign the retrived data in to mylist variable -
Hello Every1,
I have created a implementaion for some definition.
Now I need to call a method from the implemenation in my program. Let me know how to call it?
Regards,
Siva.Hai
Go through the following Code
*& Report ZABAPOBJECTS_01 *
report ZABAPOBJECTS_01 .
parameter : p_matnr like mara-matnr.
CLASS lcl_material DEFINITION
class lcl_material definition.
public section.
data: v_matnr type mara-matnr.
methods : constructor importing matnr type mara-matnr,
get_material_description.
private section.
data : v_maktx type makt-maktx.
endclass. "lcl_material DEFINITION
CLASS lcl_material IMPLEMENTATION
class lcl_material implementation.
method get_material_description.
clear v_maktx.
select single maktx into v_maktx
from makt
where matnr = v_matnr and
spras = 'E'.
endmethod. "get_material_description
method constructor.
clear v_matnr.
v_matnr = matnr.
endmethod. "constructor
endclass. "lcl_material IMPLEMENTATION
data : obj type ref to lcl_material.
start-of-selection.
create object obj exporting matnr = p_matnr.
call method obj->get_material_description.
Thanks & regards
Sreenivasulu P
Maybe you are looking for
-
Windows Vista user. Error when downloading itunes.
I recently had itunes and my sister received an ipod touch but we could not get the itunes to recognize the ipod touch. I tried updating and received this message: An error occurred during the installation of assembly 'Microsoft. VC80.CRT,type="win32
-
Third party automatic creation of Purchase order
Dear experts, In third party scenario i used ALES item category for automatic creation of PR & PO.. But i am unable to get..it... Isit any other settings required for this process. Please advise Thanks & Regards, VSN
-
Look forward for a solution to above
-
How setup a WRT54G2 Wireless Router to connect to a SmartPhone to Retrieve E-Mail
I have a new WRT54G2 Wireless Router and I can Surf the Web on my Smartphone via the Router but I am unable to retieve my E-Mail like I used to do with my old Wireless Router. Anyone know what setting I need to change on the WRT54G2 Wireless Router?
-
Why does a slideshow in Elements 13 display photos not in the selected album? How do I prevent this.
Using a Mac 10.9.5 os and Elements 13. I have a catalog of photos from a trip, divided into albums by day. When I select one for a slideshow, at least one photo from a different album appears. It is not in the group of photos selected. Sometimes it i