How to call a Procedure throguh a BUTTON

I want to call a procedure through a button; WHEN BUTTON PRESSED TRIGGER.
Plz tell how it would be...?

Ghulam Yassen wrote:
I want to call a procedure through a button; WHEN BUTTON PRESSED TRIGGER.
Plz tell how it would be...?Without more information, it's hard to provide exact solution...
just call a procedure in a button or anywhere simply follow this code
procedure_name;Hope this helps

Similar Messages

Calling a Procedure from a Button?

Hi All,
I'm using Oracle Application Express 11g & I'm currently working on an application. One of the requirements for this particular application is that a user has to be able to enter an applicant's id number (in the id textfield) & if a user clicks a button then they should be able to check in the db whether the applicant exists or not. If the applicant exists then name & surname textfields should be populated with values from the database corresponding to the id number & all these three textfields should be read only. If the applicant doesn't exist then the user will be directed to a page where he/she will fill in new applicant's details.
So, I wrote the following procedure to do that:
CREATE OR REPLACE PROCEDURE search_applicant(
P17_APPLICANT_IDNUMBER IN FIR_APPLICANT.applicant_idnumber%TYPE,
P17_NAME OUT FIR_APPLICANT.name%TYPE,
P17_SURNAME OUT FIR_APPLICANT.surname%TYPE,
P17_COUNT IN FIR_CURRENCY.currency_id%TYPE) IS
BEGIN
SELECT count(*)
INTO P17_COUNT
FROM fir_applicant
WHERE applicant_idnumber = :P17_APPLICANT_IDNUMBER;
IF P17_COUNT > 0 THEN
SELECT name,surname
INTO P17_NAME, P17_SURNAME
FROM fir_applicant
WHERE applicant_idnumber = :P17_APPLICANT_IDNUMBER;
dbms_output.put_line('Name: ' || P17_NAME || ' & Surname: ' || P17_SURNAME);
ELSE
dbms_output.put_line('Applicant does not exit.');
END IF;
EXCEPTION WHEN NO_DATA_FOUND THEN
dbms_output.put_line('Applicant does not exit.');
END;
So far I have not been able to find any help in this regard. I know how to invoke a javascript from a button but I'm not sure how to go about this one.
Any help in this regard is highly appreciated.
THANK YOU
Kamo

Thanx PaulD & Chris,
Sorry for the delay in response - I couldn't implement the solutions you recommended for me. My ApEx instance is down (& has been for the past week). It finally dawned on me that I could recreate my problem @ apex.oracle.com. Please take a look at the following application & see if you can help:
http://apex.oracle.com/pls/otn/f?p=45267:2:714925804498386:::::
Username: Kamo
Password: admin
PS: I have tried to call a Procedure from a button using a page process but it still couldn't work.
THANK YOU!
Kamo
Edited by: user5429001 on 2009/01/28 6:10 AM
Edited by: user5429001 on 2009/01/28 6:21 AM

How to call one procedure from another procedure

Hi all,
Could anyone give me clue how to call a procedure contains out parameters
from another procedure.
I had following procedures.
1)
create or replace procedure INS_PUR_ORDER
p_poamt in number,
p_podate in date,
p_poid out number
is
begin
select pkseq.nextval into p_poid from dual;
insert into pur_order(poamt,podate,poid)
values (p_poamt,p_podate,p_poid);
end;
2)
create or replace procedure INS_PUR_ORDER_DETAIL
p_pounits in number,
p_poddate in date,
p_poid in number)
is
begin
Insert into pur_order_detail(podid,pounits,poddate,poid)
values(pdseq.nextval,p_pounits,p_poddate,p_poid);
end;
I need to write a 3rd procedure which calls above two procedures.
like
call first procedure ,basing on the return value
i.e if p_poid != 0 then
we need to call second procedure
in the loop.
thanks in advance.
rampa.

Not sure what are you doing, you can not assign cursor to another cursor, may be you are looking for this?
SQL> create or replace procedure proc1 ( result out sys_refcursor)
2 is
3
4 begin
5     open result for
6       select 'HELLO WORLD' from dual ;
7 end proc1 ;
8 /
Procedure created.
Elapsed: 00:00:00.01
SQL> create or replace procedure proc2
2 is
3     l_cursor sys_refcursor ;
4 begin
5     l_cursor := proc1 ;
6
7
8     open l_cursor;
9     fetch l_cursor into l_text;
10     dbms_output.put_line(l_text);
11     close l_cursor;
12
13
14 end proc2 ;
15 /
Warning: Procedure created with compilation errors.
Elapsed: 00:00:00.01
SQL> show error;
Errors for PROCEDURE PROC2:
LINE/COL ERROR
5/4      PL/SQL: Statement ignored
5/16     PLS-00306: wrong number or types of arguments
         in call to 'PROC1'
6/4      PLS-00201: identifier 'L_TEXT' must be
         declared
6/4      PL/SQL: Statement ignored
8/4      PLS-00382: expression is of wrong type
8/4      PL/SQL: SQL Statement ignored
9/4      PL/SQL: SQL Statement ignored
9/24     PLS-00201: identifier 'L_TEXT' must be
         declared
10/4     PL/SQL: Statement ignored
10/25    PLS-00201: identifier 'L_TEXT' must be
         declared
---- this is the correct waySQL>ed
1 create or replace procedure proc2
2 is
3     l_cursor sys_refcursor ;
4     l_text varchar2(100);
5 begin
---- procedure call
6     proc1(l_cursor);
7    -- open l_cursor;
8     fetch l_cursor into l_text;
9     dbms_output.put_line(l_text);
10     close l_cursor;
11* end proc2 ;
SQL> /
Procedure created.
Elapsed: 00:00:00.01
SQL> set serveroutput on
SQL> execute proc2;
HELLO WORLD
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL>

Calling a Procedure from a Button? (REVISITED)

Hi All,
I once asked a question Re: Calling a Procedure from a Button? & that problem was resolved when i was working on the online ApEx.
On my application, requirements have changed a bit: I have one form based on two tables. One table contributes two fields (name & surname) to the form while the remaining fields are contributed by another table to make a total of 17 fields on the form.
My process is in such a way that a user enters an id number & clicks Search button, if the apllicant exists then both name & surname corresponding with the id number will be retrieved from the database. If the applicant does not exist then an error message will be displayed inline with the id number field. Here's the PL/SQL anonymous block to that:
DECLARE
vNAME APPLICANTS.name%TYPE;
vSURNAME APPLICANTS.surname%TYPE;
BEGIN
SELECT count(*)
INTO :P2_COUNT
FROM applicants
WHERE id_number = :P2_ID_NUMBER;
IF :P2_COUNT > 0 THEN
SELECT name,surname
INTO vNAME, vSURNAME
FROM applicants
WHERE id_number = :P2_ID_NUMBER;
:P2_NAME := vNAME;
:P2_SURNAME := vSURNAME;
ELSE
apex_application.g_print_success_message := 'Applicant does not exist.';
END IF;
EXCEPTION WHEN NO_DATA_FOUND THEN
apex_application.g_print_success_message := 'Exception Caught.';
END;The PL/SQL block works except for error displaying part (but that's a problem for another day).
NB: On my application, there’s already Automated Row Fetch & Automatic Row Processing (DML) processes for one table. Furthermore, there is also a javascript for verifying the validity of an id number. As a result, I decided to include Automated Row Fetch & Automatic Row Processing (DML) processes for the other table. When I click a Search button the javascript is activated even though I did not specify a URL target for the button - because this is a simple button among region items – it does not have Optional Url Redirect section.
I'm not sure what I'm doing wrong here - any help is appreciated.
Regards
Kamo

Hi Dan,
Sorry for causing confusion with my post - it's just that I was asking the same question (with different constraints) as I had asked before so I didn't feel like going to details was necessary because in my post I included a link to the previous thread. Interestingly, I was working on apex.oracle.com when I posted the original thread - the only problem came to be when I started to move the solution to my application on my machine.
Anyway, thanks for the response!
Regards
Kamo

How to call stored procedure in hibernate

hi ,
can any one help me how to call stored procedure in hibernate.Given code in hbm.xml
and also plz tell me what is the use of <return-property/>in given hbm.xml file.
<sql-query name="selectEmployees_SP" callable="true">
<return alias="emp" class="com.centris.Employee">
<return-property name="eno" column="eno"/>
<return-property name="ename" column="ename"/>
<return-property name="address" column="address"/>
<return-property name="salary" column="salary"/>
{ ? = call p_retrieve_employees() }
</return>
</sql-query>

Hi,
Your question isn't related to Java Programming and should be asked in a [Hibernate forum|http://forum.hibernate.org/]
Kaj

How to call this procedure in my report to print my procedure output

Hi,
i have a table named letter,it contains 2 columns named as letter_id and letter_content.
select * from letter;
letter_id letter_content
103 Dear MFR
103 This is in regards to the attached DM List
103 Please Credit us after reviewing it.
103 Thanks
103 Regards
103 xxxx
108 Dear customer
108 This is to inform that ur DM List is as follows
108 Credit us according to the Dm after reviewing it.
108 Thanks
108 Regards
108 xxxx
now my requirement is,i need send a parameter as letter_id to a procedure or function in pl/sql in oracle,the output should be as follows:
if we will pass parameter(letter_id) = 103 then it displays as follows:
Dear MFR
This is in regards to the attached DM List.Please Credit us after reviewing it.
Thanks
Regards,
XXXXX.
if we will pass parameter(letter_id) = 108 then it should displays as follows:
Dear customer,
This is to inform that ur DM List is as follows. Credit us according to the Dm after reviewing it.
Thanks
Regards,
XXXXX.
the procedure for my requirement is like below.now my problem is how to call this procedure in my report.so that if i will send a parameter as letter_id then it should get my report stated above.
CREATE OR REPLACE PROCEDURE letter_text ( p_letter_id letter.letter_id%TYPE , p_letter_contents_out OUT SYS_REFCURSOR )
IS
BEGIN
OPEN p_letter_contents_out
FOR
SELECT letter_content
FROM letter
WHERE letter_id = p_letter_id
ORDER BY line_seq;
END letter_text;
which you might call with something like
SQL> var results refcursor
SQL> exec letter_text(103, :results)
PL/SQL procedure successfully completed.
SQL> print :results;
CONTENT
Dear MFR
this is in regards to the attached DM List
Please credit us after reviewing it
thanks
Regards
EXP
6 rows selected.
so, the same out put i need to get it in a report.
Thanks

Thanks for ur suggestions.
i have 2 select statements.1st query is the main query for the report.so i used it at the time of report created with datablock.
now my 2nd query is
select letter_content
from ( select content_seq,
 content || case content_seq
when 2 then
' ' || lead(content) over (partition by letter_id order by content_seq)
end as letter_content
from exp_letter_contents
 where letter_id = 103)
where content_seq <> 3;
i had taken 2parameters 1 for the main query and 2nd is for the above query(parameter is letter_id).
now i have to write the above select statement in the report.
so i had taken a field object in the report and then i had written this code in before report trigger.
function letter_contentFormatTrigger return boolean is
begin
select letter_content
from ( select content_seq,
 content ||
 case content_seq when 2 then
 ' ' || lead(content) over (partition by letter_id order by content_seq)
 end as letter_content
 from exp_letter_contents
 where letter_id = 103)
where content_seq <> 3;
return (letter_content);
end;
when i tried to compile it.i got an error as follows :
error 103 at line6,column 5
encountered the symbol "CASE" when expecting one of the following:
(- + mod null <an identifier>
<a double-quoted delimited-identifier><a bind variable> avg...etc
so,where can i write this select statement.
i am using oracle reports6i
Message was edited by:
user579585

How to call plsql procedure or function and getting back the string?

Hi Everyone,
i am using Jdev 11.1.1.5.0.
i have a requirement to call plsql procedure or function from my backing bean java file and get back the returned value from the procedure or function.
what piece of simple code i need to write in my backing bean?
please suggest.
Thanks.

As always you write the method to call he pl/sql in the application module, expose this method to the client (so you see it in the datacontroll) then create a operation binding to the method and call this operation from the bean. The result you get by operation.getResult();
You should never call pl/sql from the bean directly!
The doc shows how to call the procedure from an application module: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/bcadvgen.htm#sm0297
Timo

How to call a procedure designed in Report Builder?

Hi everyone,
The Problem?
I set up a procedure and would like to call this procedure in reports builder 6.0. I need to know how to call a procedure in reports builder.
Thanks
Tom Gilmore

You can call
procedures from a formula column's PL/SQL code.
<BLOCKQUOTE>quote:<HR>Originally posted by Thomas Gilmore ([email protected]):
Hi everyone,
The Problem?
I set up a procedure and would like to call this procedure in reports builder 6.0. I need to know how to call a procedure in reports builder.
Thanks
Tom Gilmore<HR></BLOCKQUOTE>
null

How to call plsql procedure in jasper

Hi,
anybodys know how to call plsql in jasper..
i have try this code in jasper -> select query langiuage = plsql
{CALL STD03_MERIT_PROCESSING($P{std03_studentVal},$P{std03_studentVal})}
but there is error taht said no data found..
any idea
Thnak You

Hi,
I know nada of Jasper, but it took a couple of seconds to find out that calling stored procedures aren't supported.
There are number of articles describing work-arounds for that.
This seems to be a good one:
http://brianburridge.com/2006/06/04/how-to-call-stored-procedures-from-jasper-reports/
Other suggests Hibername mappers or some bean approach,
Regards
Peter

How to call Stored procedure in SMP 2.3 ?

HI Experts,
I have stored procedure in SQL Server, in that i have Select query with WHERE Condition, how to call that procedure in SMP Application .

Do you want to create mbo from that stored procedure? Not sure if this document helps you Example: Parameters and Stored Procedures

How to call oracle procedure in JPA?

Hi,
I am new to JPA.
Can one help with a piece of code on how to call a procedure in JPA?
Thanks

Use the search, I answered this last week.

How to call store procedure in query generator

Hi All,
How to call store procedure in query generator.
Regards
Rajkumar Gupta
Edited by: Rajkumar Gupta on Dec 7, 2010 2:11 AM

Hi,
Please check the following threads.
How to use Stored Procedure in sap business one
How to add parameters to a stored procedure in B1 Query generator
How to execute the procedure in sap b1
Hope it helps,
Vasu Natari.

How to call a procedure in place of a SQL

Hi
Can any one tell me how to call a procedure in place of a SQL from Bi publisher
Thanks
Ranga
Edited by: user13274784 on Jul 22, 2010 9:47 AM

One way would be to use pipelined table functions. Call the procedure within a function and return data in the form of a table.
Search the forum.
Check this out: http://winrichman.blogspot.com/search/label/pipelined
http://bipublisher.blogspot.com/2007/09/plsql-taking-it-to-next-level.html
BI publisher to use Stored Procedure
Edited by: BIPuser on Jul 22, 2010 10:22 AM

How to call stored procedure from Pro*C

How to call stored procedure from Pro*C ?
my system spec is SuSE Linux 9.1, gcc version : 3.3.3, oracle : 10g
my Pro*C code is the following..
EXEC SQL EXECUTE
begin
test_procedure();
end;
END-EXEC;
the test_procedure() has a simple update statement. and it works well in SQL Plus consol. but in Pro*C, there is a precompile error.
will anybody help me what is the problem ??

I'm in the process of moving C files (with embedded SQL, .PC files) from Unix to Linux. One program I was trying to compile had this piece of code that called an Oracle function (a standalone), which compiled on Unix, but gives errors on Linux:
EXEC SQL EXECUTE
BEGIN
:r_stat := TESTSPEC.WEATHER_CHECK();
END;
END-EXEC;
A call similar to this is in another .PC file which compiled on Linux with no problem. Here is what the ".lis" file had:
Pro*C/C++: Release 10.2.0.1.0 - Production on Mon Jun 12 09:26:08 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Error at line 193, column 5 in file weather_check.pc
193 BEGIN
193 ....1
193 PCC-S-02346, PL/SQL found semantic errors
Error at line 194, column 8 in file weather_check.pc
194 :r_stat := TESTSPEC.WEATHER_CHECK();
194 .......1
194 PLS-S-00000, Statement ignored
Error at line 194, column 18 in file weather_check.pc
194 :r_stat := TESTSPEC.WEATHER_CHECK();
194 .................1
194 PLS-S-00201, identifier 'TESTSPEC.WEATHER_CHECK' must be declared
Pro*C/C++: Release 10.2.0.1.0 - Production on Mon Jun 12 09:26:08 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /oracle_client/product/v10r2/precomp/ad
min/pcscfg.cfg
Error at line 194, column 18 in file weather_check.pc
:r_stat := TESTSPEC.WEATHER_CHECK();
.................1
PLS-S-00201, identifier 'TESTSPEC.WEATHER_CHECK' must be declared
Error at line 194, column 8 in file weather_check.pc
:r_stat := TESTSPEC.WEATHER_CHECK();
.......1
PLS-S-00000, Statement ignored
Semantic error at line 193, column 5, file weather_check.pc:
BEGIN
....1
PCC-S-02346, PL/SQL found semantic errors

How to call a procedure

Hi,
I know this a silly question..but i am not getting how to do.
I have stored procedure with multiple OUT and IN parameters.But i want to use only one parameter to call the procedure, for example:
create or replace
PROCEDURE Get_NN_Distance ( nbrid OUT NUMBER
, nbrTDistOut OUT NUMBER
, nbrRHouse OUT NUMBER
, nbrResDist OUT NUMBER
, nbrBHouse OUT NUMBER
, nbrBdist OUT NUMBER
, nbrSIDIn IN NUMBER
, nbrRefLatIn IN NUMBER
, nbrRefLonIn IN NUMBER
, nbrRadius IN NUMBER := 1000 -- Default to 200 ft.
but i want to use only one parameter nbrSIDIn only.
this parameter represents SITEID, If we give SITEID we can get LAT,Long for that siteid by using another table: i want to put nbrradius as default:
how to call the procedure by using only SITEID:
Can anyone help me in this Plz
Thanks

ramakrish wrote:
I have stored procedure with multiple OUT and IN parameters.But i want to use only one parameter to call the procedure, The OUT parameters forces you to supply variables to receive these output values from the procedure.
So instead, create a new procedure that serves as a wrapper procedure. Where this provides a single parameter only and makes the call on your behalf using multiple parameters. E.g.
create or replace procedure Do_NN_Distance( sidIn number ) is
.. local variables...
begin
Get_NN_Distance(
nbrSIDIn => sidIn,
.. other params using local variables...
end;BTW, I suggest that you reconsider using prefixes like "+nbr+" to indicate data type. Hungarian notation is dead. Especially in a strongly typed language.. especially in a an explicit variable type definition language.
+"Encoding the type of a function into the name (so-called Hungarian notation) is brain damaged—the compiler knows the types anyway and can check those, and it only confuses the programmer."+
Linus Torvalds

How to call a Procedure throguh a BUTTON

Similar Messages

Maybe you are looking for