How to call a program from FM which acts as popup?

Hi,
I need to call a program from FM and once the program is called it needs to be opened as a popup. Maybe we need to assign size when we call from FM or do we need to give size in the program it self?
I know i can either use the Submit command or Call Transaction command. But that it self will open a full screen which i dont want. It needs to be of a smaller size.
Any help will be appreciated.
Thanks

Hi,
Try this,
REPORT ZEX_POPUPSCREEN .
*& POPUP SCREEN
* Table Declaration
TABLES VBAK.
* Start of Selection
START-OF-SELECTION.
SELECT * FROM VBAK.
WRITE / VBAK-VBELN HOTSPOT ON.
ENDSELECT.
* Display the screen
AT LINE-SELECTION.
WINDOW STARTING AT 10 10
ENDING AT 40 25.
WRITE:/ 'VBAK-VBELN, VBAK-KUNNR'.
Regards,
Nikhil.

Similar Messages

How to call java program from ABAP

Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.

This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm

How to call 'C' programs from stored procedures?

Hi
Did anybody tried to call 'C' programs
from oracle stored procedures?
If anybody knows, can you please send
how to configure the listener.ora and
tnsnames.ora. If its possible post all the
information from the begining with examples.
thanks....

Oracle JDBC did not support return a result set, if you are using Oracle 9i, you can use pipeline function, then using the TABLE() function the get the row.
Good Luck.
Welcome to http://www.anysql.net/en/

How to call one program from another program

Hai,
How to call one program through another program.
Example.
   I have two programs 1.ZPROG1 2. ZPROG2.
When i execute ZPROG1 at that time it should call ZPROG2.

Hi ,
u can use submit statement to call a program .
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
regards,
Santosh thorat

How to call java program from javascript

Hi,
I have an java program which will transform one xml to another xml using XSLT.
I want to call this java program from Javascript? Is this possible? Please suggest me.
Thanks,
Gopal

is it not possible?
do i have to refresh the page and read in the values like...
<%
String ename = request.getParameter( "EmployeeName");
session.setAttribute( "ename", ename);
%>and then call the class from here?
looking around ive come across ajax but i dont know how to use it and what you need to install and if its compatable with tomcat and jsp?
is ajax better or not really worth it?
i have anything up to 100 fields that need saving at one save click

How to call another program from LabVIEW?

Hi!
Is there anyone that can answer my question? I have found a similar thread where the user needed to call labVIEW from some program but I want to do the opposite.
I made a program in labVIEW that communicates via COM-ports (serial communication) with the processor I use at the job (Ubicom´s IP2022).
Now I want to add more funcionality to this program. I want to be able to program re-program IP2022 through this LabVIEW application.
The programming is done via an Ethernet-dongle. I start a program called IP2kProg, I write the ip-address of the dongle and the program-file (.elf) downloads at this address. But how can I do this from
LabVIEW, do I need to open IP2kProg or can I send some values to it via LabViEW?
Ant suggestions?
Thanks, Amir

Amir,
There are couple of options:
1. If your IP2kProg program has a command-line interface, you can use LabVIEW's System Exec.vi and send the commands and parameters to it.
2. If the IP2kProg has an API / exported functions, you can call them from LabVIEW using the Call Library Function Node.
Hope this gives you some ideas.
-Khalid

How to call WD program from a headerless WD screen

Hi Experts,
For the MSS worklist, I have created a custom WD headerless screen. In this screen, I have created one linktoURL UI element. When the user clicks on the screen, URL is called using following code. This code is working fine in Development. How I can remove the hardcoding related with https://ruepd.mycompany.com:50001. As for Quality the URL will be different say https://abcpd.mycompany.com:50001. Please help.
public static void wdDoModifyView(IPrivateAutoSettlementAppView wdThis, IPrivateAutoSettlementAppView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
    //@@begin wdDoModifyView
    wdContext.currentContextElement().
    setUrl("https://ruepd.mycompany.com:50001/irj/portal?" +
               "NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.mycompany.all.folder.mycompany%2Fcom.mycompany.ep.folder.enterprise_portal%2Fcom.mycompany.portal.folder.roles%2Fcom.mycompany.portal.folder.employee_self_service%2Fcom.mycompany.portal.role.employee_self_service%2Fcom.mycompany.portal.workset.employee_self_service%2Fcom.mycompany.portal.workset.area_travel_expenses%2Fcom.mycompany.portal.page.create_expense_report&DynamicParameter=trip_number%3D"+
            (wdContext.currentContextElement().getTripNumber()).replaceAll("^0*","") +
            "%26mode%3Dcreate&TarTitle=Create%20Expense%20Report");
One alernative is to create a push button and then use the navigate absolute. However navigate absolute code does not work for headerless WD screen.
How I can convert headerless into non - headerless screen. As the screen is being called from Worklist. I does not have any control on making the screen non headerless screen.
The questions are
1) Is there is any way to keep the code as shown above and remove "https://ruepd.mycompany.com:50001" by some variable. So that we can avoid hard coding the value of https://ruepd.mycompany.com:50001
2) How to change the screen from hearless screen to non headerless screen. In this case I will use navigate absolute
3) Can we use navigate absolute in case of headerless screen. FYI - I have checked and found that I can not use it in headerless screen
Regards,
Gary

Hi,
I am using following code:
     String hostName = TaskBinder.getCurrentTask().getProtocolAdapter().getServerName();
     if (hostName.equalsIgnoreCase("development.mycompany.com"))
     wdContext.currentContextElement().
     setUrl("https://ruepd.mycompany.com:50001/irj/portal?" +
                 "NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.mycompany.all.folder.mycompany%2Fcom.mycompany.ep.folder.enterprise_portal%2Fcom.mycompany.portal.folder.roles%2Fcom.mycompany.portal.folder.employee_self_service%2Fcom.mycompany.portal.role.employee_self_service%2Fcom.mycompany.portal.workset.employee_self_service%2Fcom.mycompany.portal.workset.area_travel_expenses%2Fcom.mycompany.portal.page.create_expense_report&DynamicParameter=trip_number%3D"+
             (wdContext.currentContextElement().getTripNumber()).replaceAll("^0*","") +
               "%26mode%3Dcreate&TarTitle=Create%20Expense%20Report");
     if (hostName.equalsIgnoreCase("quality.mycompany.com"))
     wdContext.currentContextElement().
     setUrl("https://ruepd.mycompany.com:50001/irj/portal?" +
                 "NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.mycompany.all.folder.mycompany%2Fcom.mycompany.ep.folder.enterprise_portal%2Fcom.mycompany.portal.folder.roles%2Fcom.mycompany.portal.folder.employee_self_service%2Fcom.mycompany.portal.role.employee_self_service%2Fcom.mycompany.portal.workset.employee_self_service%2Fcom.mycompany.portal.workset.area_travel_expenses%2Fcom.mycompany.portal.page.create_expense_report&DynamicParameter=trip_number%3D"+
             (wdContext.currentContextElement().getTripNumber()).replaceAll("^0*","") +
               "%26mode%3Dcreate&TarTitle=Create%20Expense%20Report");
Is it a correct approach?
Regards,
Gary

How to call report program from WebDynpro Application

HI
How call report program in WDA.
1. To extract the xml files and store the data in to data base table, program name is "zprogram_application".
When run the se38 it's working fine and save the data in database.
2. When i click "SUBMIT" button the web dynpro application automatically run the Report program "zprogram_application" and save the data into data base table. This is my requirement please give me suggestions.
3. I want run the report program in web dynpro application.
Thank you
V.VENKATESH

From within the WDA Event handler you can call the program using SUBMIT ... AND RETURN. You might have to be careful with what the program does. It must run as though it is in the background. There is no connection to the client machine - so no SAPGUI calls. You might also consider the addition VIA JOB job NUMBER n... to the SUBMIT command. That will allow you to start the submitted program as a background job. Your WDA can then continue processing as the submitted job runs in parallel.

How to call ABAP programs from Excel

Hello everyone,
Currently I'm investigating the integration of Excel and ABAP program. I find it's easy to call Excel from ABAP program, but does anyone of you know how I can first open and do some actions in an Excel sheet first, and then, for example, when I press the save button, the data will be transferred back to ABAP system? I think when openning the Excel, the logon of the backend system is needed.
I've ever seen this functionality in some BW-reporting tools, but I cannot remember the details.
Thank you very much and best regards,
Leon

yes in BW we are having this concept of creating wookbooks & queries.
If u have BW server Go to Transaction RRMX - u will get a Microsoft Excel sheet.
Here it allows u to logon to the SAP system.
For details see this link.
<a href="https://forums.sdn.sap.com/click.jspa?searchID=561476&messageID=2553631">https://forums.sdn.sap.com/click.jspa?searchID=561476&messageID=2553631</a>
<a href="https://forums.sdn.sap.com/click.jspa?searchID=561476&messageID=519862">https://forums.sdn.sap.com/click.jspa?searchID=561476&messageID=519862</a>

How to call VB program from PL/SQL ?

hi, i use oracle8i and i would like to call program VB from Stored procedur or PL/SQL program.
Is it possible and how?
thanks

If you are trying to invoke a WebService, it shouldn't matter what under what platform that WebService compiled or where it is executing, as long as it is on a shared network. That is the very "definition" of a WebService. You should be able to invoke the webservice via TCP sockets, streaming XML message content.
If your VB WebService isn't, in reality, a WebService and you need to invoke it as an ActiveX dll that is possible with Oracle COM Automation. The 8i/9i data server must be running on the win32 platform that has the ActiveX dll installed. I'm not sure if there is any DCOM possibilities (though I suspect not). In all circumstances, if you data server is running on a non-win32 platform, you are out of luck.
If you are trying to invoke an ActiveX application (not a dll) from the 8i/9i data server, you are pretty much out of luck, too.
Hope that helps,
Michael

How to call Abap Program from Javascript or html ?

Hi All,
I have developed a program using html, abap and javascript. I want to call an abap program while clicking on the button.
How can I do it ?

Hi Rajesh,
What kind of program it is? is it a report or a transaction?
If it's transaction, you can call the transaction as below from a link or button.
http://<host>:<port>/sap/bc/gui/sap/its/webgui?~transaction=<transaction>
Please replace the parameters in <..> with appropriate values before testing.
Regards,
Ravi

How to call a Query from widget which has mandatory variables/filter values

Dear Gurus,
I want to show data from BI query (BEX) in Wedget, which has variable/ Filter as input parameter. Please tell me how add these parameters while calling query throgh web service.
Regards,
Aslam Khan

Hi Aslam,
Kindly refer to Page Number 49 u2013 23rd Point and Page 50 and 51 in the SAPEnterpriseWidgetDevelopmentGuide.pdf u2013 Which explains how to pass the Import / input Parameters.
You can also refer these links u2013 [How to pass more than one value in RfcRequest ?;
[how to bind an input field with an rfc input;
Hope it helpsu2026
Regards,
Shilpa B.V

How to call module program from report?

Hi ,
I have a requirement in which i have to develop a report which calls SM13 tcode and executes that Tcode and takes the output of SM13 into an internal table.And this internal table needs to be sent to user through an email.
Can anyone please help me out.

Not a do-my-work-for-me site....Read the rules, search the forum.....

Call C++ programs from PL/SQL

Can someone give me an example of how to call C++ programs from PL/SQL ASAP please?
Thanks
Chitra

Hello,
You can use External Procedure facility of of PL/SQL (Assuming your DB is 8 or 8i)
Please refer the doc at http://oradoc.photo.net/ora8doc/DOC/server803/A54654_01/10_procs.htm
James

My safari browser seems to have been taken over by a malicious program called only-search. Does any one know how to uninstall this program from safari? I am running osX 10.10.

My safari browser seems to have been taken over by a malicious program called only-search. Does any one know how to uninstall this program from safari? I am running osX 10.10.

There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to call a program from FM which acts as popup?

Similar Messages

Maybe you are looking for